From: Abel Vesa <abel.vesa@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 3/6] arm64: dts: qcom: sm8250: Use 2 interconnect cells
Date: Fri, 2 Jun 2023 09:20:13 +0300 [thread overview]
Message-ID: <20230602062016.1883171-3-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230602062016.1883171-1-abel.vesa@linaro.org>
Use two interconnect cells in order to optionally support a path tag.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes since v1:
* This patch was not part of v1
arch/arm64/boot/dts/qcom/sm8250.dtsi | 72 ++++++++++++++--------------
1 file changed, 36 insertions(+), 36 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e5c60a6e4074..c5787489b05c 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -106,8 +106,8 @@ CPU0: cpu@0 {
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
- <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>;
#cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
@@ -137,8 +137,8 @@ CPU1: cpu@100 {
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
- <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>;
#cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
@@ -162,8 +162,8 @@ CPU2: cpu@200 {
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
- <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>;
#cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
@@ -187,8 +187,8 @@ CPU3: cpu@300 {
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
- <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>;
#cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
@@ -212,8 +212,8 @@ CPU4: cpu@400 {
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
- <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>;
#cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
@@ -237,8 +237,8 @@ CPU5: cpu@500 {
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
- <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>;
#cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
@@ -262,8 +262,8 @@ CPU6: cpu@600 {
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
- <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>;
#cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
@@ -287,8 +287,8 @@ CPU7: cpu@700 {
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 2>;
operating-points-v2 = <&cpu7_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
- <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>;
#cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
@@ -1789,49 +1789,49 @@ spi13: spi@a94000 {
config_noc: interconnect@1500000 {
compatible = "qcom,sm8250-config-noc";
reg = <0 0x01500000 0 0xa580>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1620000 {
compatible = "qcom,sm8250-system-noc";
reg = <0 0x01620000 0 0x1c200>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mc_virt: interconnect@163d000 {
compatible = "qcom,sm8250-mc-virt";
reg = <0 0x0163d000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sm8250-aggre1-noc";
reg = <0 0x016e0000 0 0x1f180>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre2_noc: interconnect@1700000 {
compatible = "qcom,sm8250-aggre2-noc";
reg = <0 0x01700000 0 0x33000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
compute_noc: interconnect@1733000 {
compatible = "qcom,sm8250-compute-noc";
reg = <0 0x01733000 0 0xa180>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sm8250-mmss-noc";
reg = <0 0x01740000 0 0x1f080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
@@ -2260,7 +2260,7 @@ crypto: crypto@1dfa000 {
<&apps_smmu 0x59f 0x0000>,
<&apps_smmu 0x586 0x0011>,
<&apps_smmu 0x596 0x0011>;
- interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 &mc_virt SLAVE_EBI_CH0>;
+ interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "memory";
};
@@ -3693,21 +3693,21 @@ opp-202000000 {
dc_noc: interconnect@90c0000 {
compatible = "qcom,sm8250-dc-noc";
reg = <0 0x090c0000 0 0x4200>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
gem_noc: interconnect@9100000 {
compatible = "qcom,sm8250-gem-noc";
reg = <0 0x09100000 0 0xb4000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
npu_noc: interconnect@9990000 {
compatible = "qcom,sm8250-npu-noc";
reg = <0 0x09990000 0 0x1600>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
@@ -3837,8 +3837,8 @@ venus: video-codec@aa00000 {
<&videocc VIDEO_CC_MVS0_CLK>;
clock-names = "iface", "core", "vcodec0_core";
- interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>,
- <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_VENUS_CFG 0>,
+ <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "cpu-cfg", "video-mem";
iommus = <&apps_smmu 0x2100 0x0400>;
@@ -4122,10 +4122,10 @@ camss: camss@ac6a000 {
<&apps_smmu 0xc40 0x400>,
<&apps_smmu 0xc41 0x400>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>,
- <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>,
- <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>,
- <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_CAMERA_CFG 0>,
+ <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "cam_ahb",
"cam_hf_0_mnoc",
"cam_sf_0_mnoc",
@@ -4182,8 +4182,8 @@ mdss: display-subsystem@ae00000 {
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
- interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
- <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "mdp0-mem", "mdp1-mem";
power-domains = <&dispcc MDSS_GDSC>;
@@ -5671,7 +5671,7 @@ epss_l3: interconnect@18590000 {
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
clock-names = "xo", "alternate";
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
};
cpufreq_hw: cpufreq@18591000 {
--
2.34.1
next prev parent reply other threads:[~2023-06-02 6:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-02 6:20 [PATCH v2 1/6] arm64: dts: qcom: sm8150: Use 2 interconnect cells Abel Vesa
2023-06-02 6:20 ` [PATCH v2 2/6] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs Abel Vesa
2023-06-02 9:19 ` Konrad Dybcio
2023-06-02 6:20 ` Abel Vesa [this message]
2023-06-02 9:20 ` [PATCH v2 3/6] arm64: dts: qcom: sm8250: Use 2 interconnect cells Konrad Dybcio
2023-06-02 6:20 ` [PATCH v2 4/6] arm64: dts: qcom: sm8250: Add missing interconnect paths to USB HCs Abel Vesa
2023-06-02 9:20 ` Konrad Dybcio
2023-06-02 6:20 ` [PATCH v2 5/6] arm64: dts: qcom: sm8350: " Abel Vesa
2023-06-02 6:20 ` [PATCH v2 6/6] arm64: dts: qcom: sm8450: Add missing interconnect paths to USB HC Abel Vesa
2023-09-12 17:09 ` Neil Armstrong
2023-06-02 9:19 ` [PATCH v2 1/6] arm64: dts: qcom: sm8150: Use 2 interconnect cells Konrad Dybcio
2023-06-13 23:48 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230602062016.1883171-3-abel.vesa@linaro.org \
--to=abel.vesa@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).