From: Sricharan Ramabadhran <quic_srichara@quicinc.com>
To: <agross@kernel.org>, <andersson@kernel.org>,
<konrad.dybcio@linaro.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <mturquette@baylibre.com>,
<sboyd@kernel.org>, <ulf.hansson@linaro.org>,
<linus.walleij@linaro.org>, <catalin.marinas@arm.com>,
<will@kernel.org>, <p.zabel@pengutronix.de>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
<linux-gpio@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <robimarko@gmail.com>,
<krzysztof.kozlowski@linaro.org>, <andy.shevchenko@gmail.com>,
<quic_srichara@quicinc.com>
Subject: [PATCH V8 0/8] Add minimal boot support for IPQ5018
Date: Fri, 2 Jun 2023 13:53:17 +0530 [thread overview]
Message-ID: <20230602082325.1445261-1-quic_srichara@quicinc.com> (raw)
The IPQ5018 is Qualcomm's 802.11ax SoC for Routers,
Gateways and Access Points.
This series adds minimal board boot support for ipq5018-rdp432-c2 board.
[v8] Changed only in patch 4/8
Fixed Kconfig to add COMPILE_TEST and removed header of.h.
Instead using mod_devicetable.h. Added Linus reviewed-by
[v7] Fixed tz reserved region size in patch 7/8
[v6] Fixed patch [4/8] pinctrl driver for rebase issue.
[v5]
Added Reviewed-by tags from Krzysztof Kozlowski.
Changed patch [6/8] with [1] since its already Acked
Rebased patch [4/8] on top of [2] and fixed other comments
Fixed commit log for patch [7/8]
Fixed comments for patch [2/8]
[1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1678164097-13247-4-git-send-email-quic_mmanikan@quicinc.com/
[2] https://lore.kernel.org/r/1683718725-14869-1-git-send-email-quic_rohiagar@quicinc.com
[v4]
Fixed all comments for clocks, schema, dts
Added Reviewed-by tags.
[v3]
Fixed all comments for clocks, schema fixes
Picked up Reviewed-by from Bjorn for pinctrl driver
[v2]
Fixed all comments and rebased for TOT.
Manikanta Mylavarapu (1):
dt-bindings: scm: Add compatible for IPQ5018
Sricharan Ramabadhran (7):
dt-bindings: arm64: Add IPQ5018 clock and reset
clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018
dt-bindings: pinctrl: qcom: Add support for ipq5018
pinctrl: qcom: Add IPQ5018 pinctrl driver
dt-bindings: qcom: Add ipq5018 bindings
arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
arm64: defconfig: Enable IPQ5018 SoC base configs
.../devicetree/bindings/arm/qcom.yaml | 7 +
.../bindings/clock/qcom,ipq5018-gcc.yaml | 63 +
.../bindings/firmware/qcom,scm.yaml | 1 +
.../bindings/pinctrl/qcom,ipq5018-tlmm.yaml | 127 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 72 +
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 250 ++
arch/arm64/configs/defconfig | 3 +
drivers/clk/qcom/Kconfig | 10 +-
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-ipq5018.c | 3731 +++++++++++++++++
drivers/pinctrl/qcom/Kconfig | 11 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq5018.c | 783 ++++
include/dt-bindings/clock/qcom,gcc-ipq5018.h | 183 +
include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 +
16 files changed, 5364 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi
create mode 100644 drivers/clk/qcom/gcc-ipq5018.c
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5018.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h
create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h
--
2.34.1
next reply other threads:[~2023-06-02 8:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-02 8:23 Sricharan Ramabadhran [this message]
2023-06-02 8:23 ` [PATCH V8 1/8] dt-bindings: arm64: Add IPQ5018 clock and reset Sricharan Ramabadhran
2023-06-02 8:23 ` [PATCH V8 3/8] dt-bindings: pinctrl: qcom: Add support for ipq5018 Sricharan Ramabadhran
2023-06-02 8:23 ` [PATCH V8 4/8] pinctrl: qcom: Add IPQ5018 pinctrl driver Sricharan Ramabadhran
2023-06-02 8:23 ` [PATCH V8 5/8] dt-bindings: qcom: Add ipq5018 bindings Sricharan Ramabadhran
2023-06-02 8:23 ` [PATCH V8 6/8] dt-bindings: scm: Add compatible for IPQ5018 Sricharan Ramabadhran
2023-06-02 8:23 ` [PATCH V8 7/8] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support Sricharan Ramabadhran
2023-06-02 8:23 ` [PATCH V8 8/8] arm64: defconfig: Enable IPQ5018 SoC base configs Sricharan Ramabadhran
[not found] ` <20230602082325.1445261-3-quic_srichara@quicinc.com>
2023-06-02 13:11 ` [PATCH V8 2/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 Andy Shevchenko
2023-06-02 17:10 ` Sricharan Ramabadhran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230602082325.1445261-1-quic_srichara@quicinc.com \
--to=quic_srichara@quicinc.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=andy.shevchenko@gmail.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=robimarko@gmail.com \
--cc=sboyd@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).