From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: rfoss@kernel.org, todor.too@gmail.com,
bryan.odonoghue@linaro.org, agross@kernel.org,
andersson@kernel.org, konrad.dybcio@linaro.org,
mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
laurent.pinchart@ideasonboard.com, sakari.ailus@linux.intel.com,
andrey.konovalov@linaro.org
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: [PATCH v3 03/10] media: qcom: camss: Fix genpd cleanup
Date: Wed, 30 Aug 2023 16:16:08 +0100 [thread overview]
Message-ID: <20230830151615.3012325-4-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20230830151615.3012325-1-bryan.odonoghue@linaro.org>
Right now we never release the power-domains properly on the error path.
Add a routine to be reused for this purpose and appropriate jumps in
probe() to run that routine where necessary.
Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss.c | 35 ++++++++++++++---------
1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index a925b2bfd8989..c6df862c79e39 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1538,6 +1538,20 @@ static int camss_icc_get(struct camss *camss)
return 0;
}
+static void camss_genpd_cleanup(struct camss *camss)
+{
+ int i;
+
+ if (camss->genpd_num == 1)
+ return;
+
+ if (camss->genpd_num > camss->vfe_num)
+ device_link_del(camss->genpd_link[camss->genpd_num - 1]);
+
+ for (i = 0; i < camss->genpd_num; i++)
+ dev_pm_domain_detach(camss->genpd[i], true);
+}
+
/*
* camss_probe - Probe CAMSS platform device
* @pdev: Pointer to CAMSS platform device
@@ -1627,11 +1641,11 @@ static int camss_probe(struct platform_device *pdev)
ret = camss_init_subdevices(camss);
if (ret < 0)
- return ret;
+ goto err_genpd_cleanup;
ret = dma_set_mask_and_coherent(dev, 0xffffffff);
if (ret)
- return ret;
+ goto err_genpd_cleanup;
camss->media_dev.dev = camss->dev;
strscpy(camss->media_dev.model, "Qualcomm Camera Subsystem",
@@ -1643,7 +1657,7 @@ static int camss_probe(struct platform_device *pdev)
ret = v4l2_device_register(camss->dev, &camss->v4l2_dev);
if (ret < 0) {
dev_err(dev, "Failed to register V4L2 device: %d\n", ret);
- return ret;
+ goto err_genpd_cleanup;
}
v4l2_async_nf_init(&camss->notifier, &camss->v4l2_dev);
@@ -1693,28 +1707,19 @@ static int camss_probe(struct platform_device *pdev)
err_v4l2_device_unregister:
v4l2_device_unregister(&camss->v4l2_dev);
v4l2_async_nf_cleanup(&camss->notifier);
+err_genpd_cleanup:
+ camss_genpd_cleanup(camss);
return ret;
}
void camss_delete(struct camss *camss)
{
- int i;
-
v4l2_device_unregister(&camss->v4l2_dev);
media_device_unregister(&camss->media_dev);
media_device_cleanup(&camss->media_dev);
pm_runtime_disable(camss->dev);
-
- if (camss->genpd_num == 1)
- return;
-
- if (camss->genpd_num > camss->vfe_num)
- device_link_del(camss->genpd_link[camss->genpd_num - 1]);
-
- for (i = 0; i < camss->genpd_num; i++)
- dev_pm_domain_detach(camss->genpd[i], true);
}
/*
@@ -1733,6 +1738,8 @@ static void camss_remove(struct platform_device *pdev)
if (atomic_read(&camss->ref_count) == 0)
camss_delete(camss);
+
+ camss_genpd_cleanup(camss);
}
static const struct of_device_id camss_dt_match[] = {
--
2.41.0
next prev parent reply other threads:[~2023-08-30 18:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-30 15:16 [PATCH v3 00/10] media: qcom: camss: Bugfix series Bryan O'Donoghue
2023-08-30 15:16 ` [PATCH v3 01/10] media: qcom: camss: Fix pm_domain_on sequence in probe Bryan O'Donoghue
2023-08-30 15:16 ` [PATCH v3 02/10] media: qcom: camss: Fix V4L2 async notifier error path Bryan O'Donoghue
2023-08-30 15:16 ` Bryan O'Donoghue [this message]
2023-08-30 15:16 ` [PATCH v3 04/10] media: qcom: camss: Fix vfe_get() error jump Bryan O'Donoghue
2023-08-30 15:16 ` [PATCH v3 05/10] media: qcom: camss: Fix VFE-17x vfe_disable_output() Bryan O'Donoghue
2023-08-30 15:16 ` [PATCH v3 06/10] media: qcom: camss: Fix VFE-480 vfe_disable_output() Bryan O'Donoghue
2023-08-30 15:16 ` [PATCH v3 07/10] media: qcom: camss: Fix missing vfe_lite clocks check Bryan O'Donoghue
2023-08-30 15:16 ` [PATCH v3 08/10] media: qcom: camss: Fix invalid clock enable bit disjunction Bryan O'Donoghue
2023-08-30 15:16 ` [PATCH v3 09/10] media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3 Bryan O'Donoghue
2023-08-30 15:16 ` [PATCH v3 10/10] media: qcom: camss: Fix csid-gen2 for test pattern generator Bryan O'Donoghue
2023-08-30 18:35 ` [PATCH v3 00/10] media: qcom: camss: Bugfix series Bryan O'Donoghue
2023-08-30 20:47 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230830151615.3012325-4-bryan.odonoghue@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=andrey.konovalov@linaro.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=konrad.dybcio@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rfoss@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=stable@vger.kernel.org \
--cc=todor.too@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).