From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: rfoss@kernel.org, todor.too@gmail.com,
bryan.odonoghue@linaro.org, agross@kernel.org,
andersson@kernel.org, konrad.dybcio@linaro.org,
mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
laurent.pinchart@ideasonboard.com, sakari.ailus@linux.intel.com,
andrey.konovalov@linaro.org
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 15/17] media: qcom: camss: Move vfe_disable into a common routine where applicable
Date: Mon, 11 Sep 2023 14:14:09 +0100 [thread overview]
Message-ID: <20230911131411.196033-16-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20230911131411.196033-1-bryan.odonoghue@linaro.org>
We can move vfe_disable() into a common routine in the core VFE file
provided we make wm_stop() a VFE specific callback.
The callback is required to capture the case where VFE 17x currently isn't
VC enabled where as VFE 480 is.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../media/platform/qcom/camss/camss-vfe-170.c | 40 +------------------
.../media/platform/qcom/camss/camss-vfe-480.c | 40 +------------------
drivers/media/platform/qcom/camss/camss-vfe.c | 39 ++++++++++++++++++
drivers/media/platform/qcom/camss/camss-vfe.h | 9 +++++
4 files changed, 50 insertions(+), 78 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
index a5aa799501861..0b211fed12760 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-170.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -494,22 +494,6 @@ static int vfe_enable_output(struct vfe_line *line)
return 0;
}
-static void vfe_disable_output(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
- struct vfe_output *output = &line->output;
- unsigned long flags;
- unsigned int i;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
- for (i = 0; i < output->wm_num; i++)
- vfe_wm_stop(vfe, output->wm_idx[i]);
- output->gen2.active_num = 0;
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- vfe_reset(vfe);
-}
-
/*
* vfe_enable - Enable streaming on VFE line
* @line: VFE line
@@ -555,29 +539,6 @@ static int vfe_enable(struct vfe_line *line)
return ret;
}
-/*
- * vfe_disable - Disable streaming on VFE line
- * @line: VFE line
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_disable(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
-
- vfe_disable_output(line);
-
- vfe_put_output(line);
-
- mutex_lock(&vfe->stream_lock);
-
- vfe->stream_count--;
-
- mutex_unlock(&vfe->stream_lock);
-
- return 0;
-}
-
/*
* vfe_isr_sof - Process start of frame interrupt
* @vfe: VFE Device
@@ -770,4 +731,5 @@ const struct vfe_hw_ops vfe_ops_170 = {
.vfe_enable = vfe_enable,
.vfe_halt = vfe_halt,
.violation_read = vfe_violation_read,
+ .vfe_wm_stop = vfe_wm_stop,
};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-480.c b/drivers/media/platform/qcom/camss/camss-vfe-480.c
index 43a2964121f22..f2368b77fc6d6 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-480.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-480.c
@@ -327,22 +327,6 @@ static int vfe_enable_output(struct vfe_line *line)
return 0;
}
-static void vfe_disable_output(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
- struct vfe_output *output = &line->output;
- unsigned long flags;
- unsigned int i;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
- for (i = 0; i < output->wm_num; i++)
- vfe_wm_stop(vfe, output->wm_idx[i]);
- output->gen2.active_num = 0;
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- vfe_reset(vfe);
-}
-
/*
* vfe_enable - Enable streaming on VFE line
* @line: VFE line
@@ -390,29 +374,6 @@ static int vfe_enable(struct vfe_line *line)
return ret;
}
-/*
- * vfe_disable - Disable streaming on VFE line
- * @line: VFE line
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_disable(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
-
- vfe_disable_output(line);
-
- vfe_put_output(line);
-
- mutex_lock(&vfe->stream_lock);
-
- vfe->stream_count--;
-
- mutex_unlock(&vfe->stream_lock);
-
- return 0;
-}
-
/*
* vfe_isr_reg_update - Process reg update interrupt
* @vfe: VFE Device
@@ -581,4 +542,5 @@ const struct vfe_hw_ops vfe_ops_480 = {
.vfe_disable = vfe_disable,
.vfe_enable = vfe_enable,
.vfe_halt = vfe_halt,
+ .vfe_wm_stop = vfe_wm_stop,
};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index f3cf387e4907e..3d542ac93b1c2 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -410,6 +410,45 @@ int vfe_put_output(struct vfe_line *line)
return 0;
}
+static int vfe_disable_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output = &line->output;
+ unsigned long flags;
+ unsigned int i;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ for (i = 0; i < output->wm_num; i++)
+ vfe->ops->vfe_wm_stop(vfe, output->wm_idx[i]);
+ output->gen2.active_num = 0;
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return vfe_reset(vfe);
+}
+
+/*
+ * vfe_disable - Disable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_disable(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+
+ vfe_disable_output(line);
+
+ vfe_put_output(line);
+
+ mutex_lock(&vfe->stream_lock);
+
+ vfe->stream_count--;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ return 0;
+}
+
/**
* vfe_isr_comp_done() - Process composite image done interrupt
* @vfe: VFE Device
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index 4783afa73a365..09baded0dcdd6 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -114,6 +114,7 @@ struct vfe_hw_ops {
int (*vfe_enable)(struct vfe_line *line);
int (*vfe_halt)(struct vfe_device *vfe);
void (*violation_read)(struct vfe_device *vfe);
+ void (*vfe_wm_stop)(struct vfe_device *vfe, u8 wm);
};
struct vfe_isr_ops {
@@ -192,6 +193,14 @@ int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id);
*/
int vfe_reset(struct vfe_device *vfe);
+/*
+ * vfe_disable - Disable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_disable(struct vfe_line *line);
+
extern const struct vfe_hw_ops vfe_ops_4_1;
extern const struct vfe_hw_ops vfe_ops_4_7;
extern const struct vfe_hw_ops vfe_ops_4_8;
--
2.42.0
next prev parent reply other threads:[~2023-09-11 21:17 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-11 13:13 [PATCH v5 00/17] media: qcom: camss: Add parameter passing to remove several outstanding bugs Bryan O'Donoghue
2023-09-11 13:13 ` [PATCH v5 01/17] media: qcom: camss: Amalgamate struct resource with struct resource_ispif Bryan O'Donoghue
2023-09-11 13:13 ` [PATCH v5 02/17] media: qcom: camss: Rename camss struct resources to camss_subdev_resources Bryan O'Donoghue
2023-09-11 13:13 ` [PATCH v5 03/17] media: qcom: camss: Start to move to module compat matched resources Bryan O'Donoghue
2023-09-11 13:13 ` [PATCH v5 04/17] media: qcom: camss: Pass icc bandwidth table as a platform parameter Bryan O'Donoghue
2023-09-11 13:13 ` [PATCH v5 05/17] media: qcom: camss: Pass remainder of variables as resources Bryan O'Donoghue
2023-09-11 13:14 ` [PATCH v5 06/17] media: qcom: camss: Pass line_num from compat resources Bryan O'Donoghue
2023-09-11 13:14 ` [PATCH v5 07/17] media: qcom: camss: Pass CAMSS subdev callbacks via resource ops pointer Bryan O'Donoghue
2023-09-11 13:14 ` [PATCH v5 08/17] media: qcom: camss: Assign the correct number of RDIs per VFE Bryan O'Donoghue
2023-09-11 13:14 ` [PATCH v5 09/17] media: qcom: camss: Remove special case for VFE get/put Bryan O'Donoghue
2023-09-25 8:34 ` Laurent Pinchart
2023-09-11 13:14 ` [PATCH v5 10/17] media: qcom: camss: Untangle if/else spaghetti in camss Bryan O'Donoghue
2023-09-11 13:14 ` [PATCH v5 11/17] media: qcom: camss: Allow clocks vfeN vfe_liteN or vfe_lite Bryan O'Donoghue
2023-09-25 7:10 ` Hans Verkuil
2023-09-25 11:46 ` Bryan O'Donoghue
2023-09-11 13:14 ` [PATCH v5 12/17] media: qcom: camss: Functionally decompose CSIPHY clock lookups Bryan O'Donoghue
2023-09-11 13:14 ` [PATCH v5 13/17] media: qcom: camss: Fix support for setting CSIPHY clock name csiphyX Bryan O'Donoghue
2023-09-11 13:14 ` [PATCH v5 14/17] media: qcom: camss: Support RDI3 for VFE 17x Bryan O'Donoghue
2023-09-11 13:14 ` Bryan O'Donoghue [this message]
2023-09-11 13:14 ` [PATCH v5 16/17] media: qcom: camss: Propagate vfe_reset error up the callstack Bryan O'Donoghue
2023-09-11 13:14 ` [PATCH v5 17/17] media: qcom: camss: Comment CSID dt_id field Bryan O'Donoghue
2023-09-25 7:11 ` Hans Verkuil
2023-09-25 8:14 ` Laurent Pinchart
2023-09-25 14:01 ` Bryan O'Donoghue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230911131411.196033-16-bryan.odonoghue@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=andrey.konovalov@linaro.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=konrad.dybcio@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rfoss@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=todor.too@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).