linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V5 0/4] Signaling api support in glink/rpmsg clients
@ 2020-06-26 14:46 Deepak Kumar Singh
  2020-06-26 14:46 ` [PATCH V6 1/4] rpmsg: core: Add signal API support Deepak Kumar Singh
                   ` (4 more replies)
  0 siblings, 5 replies; 15+ messages in thread
From: Deepak Kumar Singh @ 2020-06-26 14:46 UTC (permalink / raw)
  To: bjorn.andersson, clew, mathieu.poirier
  Cc: linux-arm-msm, linux-remoteproc, linux-kernel, Deepak Kumar Singh

Change from version 5
[V5,4/4] rpmsg: char: Add signal callback and POLLPRI support
Updated for sparse warning. Replaced POLLPRI => EPOLLPRI to fix
warning.

Change from version 4
I am taking over these patches from aneela@codeaurora.org
Fixed all the trivial review comments.

Signal conversion to and from native signal as done in patch V4,2/4
is intentional.

Arun Kumar Neelakantam (3):
  rpmsg: glink: Add support to handle signals command
  rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
  rpmsg: char: Add signal callback and POLLPRI support

Deepak Kumar Singh (1):
  rpmsg: core: Add signal API support

 drivers/rpmsg/qcom_glink_native.c | 125 ++++++++++++++++++++++++++++++++++++++
 drivers/rpmsg/rpmsg_char.c        |  76 ++++++++++++++++++++++-
 drivers/rpmsg/rpmsg_core.c        |  40 ++++++++++++
 drivers/rpmsg/rpmsg_internal.h    |   5 ++
 include/linux/rpmsg.h             |  27 ++++++++
 5 files changed, 270 insertions(+), 3 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH V6 1/4] rpmsg: core: Add signal API support
  2020-06-26 14:46 [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Deepak Kumar Singh
@ 2020-06-26 14:46 ` Deepak Kumar Singh
  2021-05-06 17:18   ` Deepak Kumar Singh
  2020-06-26 14:46 ` [PATCH V6 2/4] rpmsg: glink: Add support to handle signals command Deepak Kumar Singh
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 15+ messages in thread
From: Deepak Kumar Singh @ 2020-06-26 14:46 UTC (permalink / raw)
  To: bjorn.andersson, clew, mathieu.poirier
  Cc: linux-arm-msm, linux-remoteproc, linux-kernel, Deepak Kumar Singh

Some transports like Glink support the state notifications between
clients using signals similar to serial protocol signals.
Local glink client drivers can send and receive signals to glink
clients running on remote processors.

Add apis to support sending and receiving of signals by rpmsg clients.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/rpmsg_core.c     | 40 ++++++++++++++++++++++++++++++++++++++++
 drivers/rpmsg/rpmsg_internal.h |  5 +++++
 include/linux/rpmsg.h          | 27 +++++++++++++++++++++++++++
 3 files changed, 72 insertions(+)

diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
index 91de940..e6eb5a1 100644
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -283,6 +283,42 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
 }
 EXPORT_SYMBOL(rpmsg_trysend_offchannel);
 
+/**
+ * rpmsg_get_signals() - get the signals for this endpoint
+ * @ept:	the rpmsg endpoint
+ *
+ * Returns signal bits on success and an appropriate error value on failure.
+ */
+int rpmsg_get_signals(struct rpmsg_endpoint *ept)
+{
+	if (WARN_ON(!ept))
+		return -EINVAL;
+	if (!ept->ops->get_signals)
+		return -ENXIO;
+
+	return ept->ops->get_signals(ept);
+}
+EXPORT_SYMBOL(rpmsg_get_signals);
+
+/**
+ * rpmsg_set_signals() - set the remote signals for this endpoint
+ * @ept:	the rpmsg endpoint
+ * @set:	set mask for signals
+ * @clear:	clear mask for signals
+ *
+ * Returns 0 on success and an appropriate error value on failure.
+ */
+int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear)
+{
+	if (WARN_ON(!ept))
+		return -EINVAL;
+	if (!ept->ops->set_signals)
+		return -ENXIO;
+
+	return ept->ops->set_signals(ept, set, clear);
+}
+EXPORT_SYMBOL(rpmsg_set_signals);
+
 /*
  * match a rpmsg channel with a channel info struct.
  * this is used to make sure we're not creating rpmsg devices for channels
@@ -468,6 +504,10 @@ static int rpmsg_dev_probe(struct device *dev)
 
 		rpdev->ept = ept;
 		rpdev->src = ept->addr;
+
+		if (rpdrv->signals)
+			ept->sig_cb = rpdrv->signals;
+
 	}
 
 	err = rpdrv->probe(rpdev);
diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
index 3fc83cd..8958d6c 100644
--- a/drivers/rpmsg/rpmsg_internal.h
+++ b/drivers/rpmsg/rpmsg_internal.h
@@ -2,6 +2,7 @@
 /*
  * remote processor messaging bus internals
  *
+ * Copyright (c) 2018, The Linux Foundation.
  * Copyright (C) 2011 Texas Instruments, Inc.
  * Copyright (C) 2011 Google, Inc.
  *
@@ -47,6 +48,8 @@ struct rpmsg_device_ops {
  * @trysendto:		see @rpmsg_trysendto(), optional
  * @trysend_offchannel:	see @rpmsg_trysend_offchannel(), optional
  * @poll:		see @rpmsg_poll(), optional
+ * @get_signals:	see @rpmsg_get_signals(), optional
+ * @set_signals:	see @rpmsg_set_signals(), optional
  *
  * Indirection table for the operations that a rpmsg backend should implement.
  * In addition to @destroy_ept, the backend must at least implement @send and
@@ -66,6 +69,8 @@ struct rpmsg_endpoint_ops {
 			     void *data, int len);
 	__poll_t (*poll)(struct rpmsg_endpoint *ept, struct file *filp,
 			     poll_table *wait);
+	int (*get_signals)(struct rpmsg_endpoint *ept);
+	int (*set_signals)(struct rpmsg_endpoint *ept, u32 set, u32 clear);
 };
 
 int rpmsg_register_device(struct rpmsg_device *rpdev);
diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
index 9fe156d..c4dbb47 100644
--- a/include/linux/rpmsg.h
+++ b/include/linux/rpmsg.h
@@ -2,6 +2,7 @@
 /*
  * Remote processor messaging
  *
+ * Copyright (c) 2018 The Linux Foundation.
  * Copyright (C) 2011 Texas Instruments, Inc.
  * Copyright (C) 2011 Google, Inc.
  * All rights reserved.
@@ -60,6 +61,7 @@ struct rpmsg_device {
 };
 
 typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
+typedef int (*rpmsg_rx_sig_t)(struct rpmsg_device *, void *, u32, u32);
 
 /**
  * struct rpmsg_endpoint - binds a local rpmsg address to its user
@@ -67,6 +69,7 @@ typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
  * @refcount: when this drops to zero, the ept is deallocated
  * @cb: rx callback handler
  * @cb_lock: must be taken before accessing/changing @cb
+ * @sig_cb: rx serial signal handler
  * @addr: local rpmsg address
  * @priv: private data for the driver's use
  *
@@ -89,6 +92,7 @@ struct rpmsg_endpoint {
 	struct kref refcount;
 	rpmsg_rx_cb_t cb;
 	struct mutex cb_lock;
+	rpmsg_rx_sig_t sig_cb;
 	u32 addr;
 	void *priv;
 
@@ -102,6 +106,7 @@ struct rpmsg_endpoint {
  * @probe: invoked when a matching rpmsg channel (i.e. device) is found
  * @remove: invoked when the rpmsg channel is removed
  * @callback: invoked when an inbound message is received on the channel
+ * @signals: invoked when a serial signal change is received on the channel
  */
 struct rpmsg_driver {
 	struct device_driver drv;
@@ -109,6 +114,8 @@ struct rpmsg_driver {
 	int (*probe)(struct rpmsg_device *dev);
 	void (*remove)(struct rpmsg_device *dev);
 	int (*callback)(struct rpmsg_device *, void *, int, void *, u32);
+	int (*signals)(struct rpmsg_device *rpdev,
+		       void *priv, u32 old, u32 new);
 };
 
 #if IS_ENABLED(CONFIG_RPMSG)
@@ -135,6 +142,9 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
 __poll_t rpmsg_poll(struct rpmsg_endpoint *ept, struct file *filp,
 			poll_table *wait);
 
+int rpmsg_get_signals(struct rpmsg_endpoint *ept);
+int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear);
+
 #else
 
 static inline int register_rpmsg_device(struct rpmsg_device *dev)
@@ -242,6 +252,23 @@ static inline __poll_t rpmsg_poll(struct rpmsg_endpoint *ept,
 	return 0;
 }
 
+static inline int rpmsg_get_signals(struct rpmsg_endpoint *ept)
+{
+	/* This shouldn't be possible */
+	WARN_ON(1);
+
+	return -ENXIO;
+}
+
+static inline int rpmsg_set_signals(struct rpmsg_endpoint *ept,
+				    u32 set, u32 clear)
+{
+	/* This shouldn't be possible */
+	WARN_ON(1);
+
+	return -ENXIO;
+}
+
 #endif /* IS_ENABLED(CONFIG_RPMSG) */
 
 /* use a macro to avoid include chaining to get THIS_MODULE */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH V6 2/4] rpmsg: glink: Add support to handle signals command
  2020-06-26 14:46 [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Deepak Kumar Singh
  2020-06-26 14:46 ` [PATCH V6 1/4] rpmsg: core: Add signal API support Deepak Kumar Singh
@ 2020-06-26 14:46 ` Deepak Kumar Singh
  2021-05-06 17:17   ` Deepak Kumar Singh
  2020-06-26 14:46 ` [PATCH V6 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support Deepak Kumar Singh
                   ` (2 subsequent siblings)
  4 siblings, 1 reply; 15+ messages in thread
From: Deepak Kumar Singh @ 2020-06-26 14:46 UTC (permalink / raw)
  To: bjorn.andersson, clew, mathieu.poirier
  Cc: linux-arm-msm, linux-remoteproc, linux-kernel,
	Arun Kumar Neelakantam, Deepak Kumar Singh

From: Arun Kumar Neelakantam <aneela@codeaurora.org>

Remote peripherals send signal notifications over glink with commandID 15.

Add support to send and receive the signal command and convert the signals
from NATIVE to TIOCM while receiving and vice versa while sending.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/qcom_glink_native.c | 125 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 125 insertions(+)

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 0e8a28c0..1bf3235 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -17,6 +17,7 @@
 #include <linux/rpmsg.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
+#include <linux/termios.h>
 #include <linux/workqueue.h>
 #include <linux/mailbox_client.h>
 
@@ -150,6 +151,8 @@ enum {
  * @intent_req_lock: Synchronises multiple intent requests
  * @intent_req_result: Result of intent request
  * @intent_req_comp: Completion for intent_req signalling
+ * @lsigs:	local side signals
+ * @rsigs:	remote side signals
  */
 struct glink_channel {
 	struct rpmsg_endpoint ept;
@@ -181,6 +184,10 @@ struct glink_channel {
 	struct mutex intent_req_lock;
 	bool intent_req_result;
 	struct completion intent_req_comp;
+
+	unsigned int lsigs;
+	unsigned int rsigs;
+
 };
 
 #define to_glink_channel(_ept) container_of(_ept, struct glink_channel, ept)
@@ -201,9 +208,15 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops;
 #define RPM_CMD_TX_DATA_CONT		12
 #define RPM_CMD_READ_NOTIF		13
 #define RPM_CMD_RX_DONE_W_REUSE		14
+#define RPM_CMD_SIGNALS			15
 
 #define GLINK_FEATURE_INTENTLESS	BIT(1)
 
+#define NATIVE_DTR_SIG			BIT(31)
+#define NATIVE_CTS_SIG			BIT(30)
+#define NATIVE_CD_SIG			BIT(29)
+#define NATIVE_RI_SIG			BIT(28)
+
 static void qcom_glink_rx_done_work(struct work_struct *work);
 
 static struct glink_channel *qcom_glink_alloc_channel(struct qcom_glink *glink,
@@ -975,6 +988,76 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid)
 	return 0;
 }
 
+/**
+ * qcom_glink_send_signals() - convert a signal cmd to wire format and transmit
+ * @glink:	The transport to transmit on.
+ * @channel:	The glink channel
+ * @sigs:	The signals to encode.
+ *
+ * Return: 0 on success or standard Linux error code.
+ */
+static int qcom_glink_send_signals(struct qcom_glink *glink,
+				   struct glink_channel *channel,
+				   u32 sigs)
+{
+	struct glink_msg msg;
+
+	/* convert signals from TIOCM to NATIVE */
+	sigs &= 0x0fff;
+	if (sigs & TIOCM_DTR)
+		sigs |= NATIVE_DTR_SIG;
+	if (sigs & TIOCM_RTS)
+		sigs |= NATIVE_CTS_SIG;
+	if (sigs & TIOCM_CD)
+		sigs |= NATIVE_CD_SIG;
+	if (sigs & TIOCM_RI)
+		sigs |= NATIVE_RI_SIG;
+
+	msg.cmd = cpu_to_le16(RPM_CMD_SIGNALS);
+	msg.param1 = cpu_to_le16(channel->lcid);
+	msg.param2 = cpu_to_le32(sigs);
+
+	return qcom_glink_tx(glink, &msg, sizeof(msg), NULL, 0, true);
+}
+
+static int qcom_glink_handle_signals(struct qcom_glink *glink,
+				     unsigned int rcid, unsigned int signals)
+{
+	struct glink_channel *channel;
+	unsigned long flags;
+	u32 old;
+
+	spin_lock_irqsave(&glink->idr_lock, flags);
+	channel = idr_find(&glink->rcids, rcid);
+	spin_unlock_irqrestore(&glink->idr_lock, flags);
+	if (!channel) {
+		dev_err(glink->dev, "signal for non-existing channel\n");
+		return -EINVAL;
+	}
+
+	old = channel->rsigs;
+
+	/* convert signals from NATIVE to TIOCM */
+	if (signals & NATIVE_DTR_SIG)
+		signals |= TIOCM_DSR;
+	if (signals & NATIVE_CTS_SIG)
+		signals |= TIOCM_CTS;
+	if (signals & NATIVE_CD_SIG)
+		signals |= TIOCM_CD;
+	if (signals & NATIVE_RI_SIG)
+		signals |= TIOCM_RI;
+	signals &= 0x0fff;
+
+	channel->rsigs = signals;
+
+	if (channel->ept.sig_cb) {
+		channel->ept.sig_cb(channel->ept.rpdev, channel->ept.priv,
+				    old, channel->rsigs);
+	}
+
+	return 0;
+}
+
 static irqreturn_t qcom_glink_native_intr(int irq, void *data)
 {
 	struct qcom_glink *glink = data;
@@ -1036,6 +1119,10 @@ static irqreturn_t qcom_glink_native_intr(int irq, void *data)
 			qcom_glink_handle_intent_req_ack(glink, param1, param2);
 			qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
 			break;
+		case RPM_CMD_SIGNALS:
+			qcom_glink_handle_signals(glink, param1, param2);
+			qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
+			break;
 		default:
 			dev_err(glink->dev, "unhandled rx cmd: %d\n", cmd);
 			ret = -EINVAL;
@@ -1332,6 +1419,42 @@ static int qcom_glink_trysend(struct rpmsg_endpoint *ept, void *data, int len)
 	return __qcom_glink_send(channel, data, len, false);
 }
 
+static int qcom_glink_get_sigs(struct rpmsg_endpoint *ept)
+{
+	struct glink_channel *channel = to_glink_channel(ept);
+
+	return channel->rsigs;
+}
+
+static int qcom_glink_set_sigs(struct rpmsg_endpoint *ept, u32 set, u32 clear)
+{
+	struct glink_channel *channel = to_glink_channel(ept);
+	struct qcom_glink *glink = channel->glink;
+	u32 sigs = channel->lsigs;
+
+	if (set & TIOCM_DTR)
+		sigs |= TIOCM_DTR;
+	if (set & TIOCM_RTS)
+		sigs |= TIOCM_RTS;
+	if (set & TIOCM_CD)
+		sigs |= TIOCM_CD;
+	if (set & TIOCM_RI)
+		sigs |= TIOCM_RI;
+
+	if (clear & TIOCM_DTR)
+		sigs &= ~TIOCM_DTR;
+	if (clear & TIOCM_RTS)
+		sigs &= ~TIOCM_RTS;
+	if (clear & TIOCM_CD)
+		sigs &= ~TIOCM_CD;
+	if (clear & TIOCM_RI)
+		sigs &= ~TIOCM_RI;
+
+	channel->lsigs = sigs;
+
+	return qcom_glink_send_signals(glink, channel, sigs);
+}
+
 /*
  * Finds the device_node for the glink child interested in this channel.
  */
@@ -1365,6 +1488,8 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops = {
 	.destroy_ept = qcom_glink_destroy_ept,
 	.send = qcom_glink_send,
 	.trysend = qcom_glink_trysend,
+	.get_signals = qcom_glink_get_sigs,
+	.set_signals = qcom_glink_set_sigs,
 };
 
 static void qcom_glink_rpdev_release(struct device *dev)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH V6 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
  2020-06-26 14:46 [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Deepak Kumar Singh
  2020-06-26 14:46 ` [PATCH V6 1/4] rpmsg: core: Add signal API support Deepak Kumar Singh
  2020-06-26 14:46 ` [PATCH V6 2/4] rpmsg: glink: Add support to handle signals command Deepak Kumar Singh
@ 2020-06-26 14:46 ` Deepak Kumar Singh
  2020-06-26 14:46 ` [PATCH V6 4/4] rpmsg: char: Add signal callback and POLLPRI support Deepak Kumar Singh
  2020-07-06 18:04 ` [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Mathieu Poirier
  4 siblings, 0 replies; 15+ messages in thread
From: Deepak Kumar Singh @ 2020-06-26 14:46 UTC (permalink / raw)
  To: bjorn.andersson, clew, mathieu.poirier
  Cc: linux-arm-msm, linux-remoteproc, linux-kernel,
	Arun Kumar Neelakantam, Deepak Kumar Singh

From: Arun Kumar Neelakantam <aneela@codeaurora.org>

Add TICOMGET and TIOCMSET ioctl support for rpmsg char device nodes
to get/set the low level transport signals.

Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/rpmsg_char.c | 54 +++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 3 deletions(-)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 4bbbacd..43ceac0 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
+ * Copyright (c) 2018, The Linux Foundation.
  * Copyright (c) 2016, Linaro Ltd.
  * Copyright (c) 2012, Michal Simek <monstr@monstr.eu>
  * Copyright (c) 2012, PetaLogix
@@ -19,6 +20,7 @@
 #include <linux/rpmsg.h>
 #include <linux/skbuff.h>
 #include <linux/slab.h>
+#include <linux/termios.h>
 #include <linux/uaccess.h>
 #include <uapi/linux/rpmsg.h>
 
@@ -269,15 +271,61 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
 	return mask;
 }
 
+static int rpmsg_eptdev_tiocmset(struct file *fp, unsigned int cmd,
+				 int __user *arg)
+{
+	struct rpmsg_eptdev *eptdev = fp->private_data;
+	u32 set, clear, val;
+	int ret;
+
+	ret = get_user(val, arg);
+	if (ret)
+		return ret;
+	set = clear = 0;
+	switch (cmd) {
+	case TIOCMBIS:
+		set = val;
+		break;
+	case TIOCMBIC:
+		clear = val;
+		break;
+	case TIOCMSET:
+		set = val;
+		clear = ~val;
+		break;
+	}
+
+	set &= TIOCM_DTR | TIOCM_RTS | TIOCM_CD | TIOCM_RI;
+	clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_CD | TIOCM_RI;
+
+	return rpmsg_set_signals(eptdev->ept, set, clear);
+}
+
 static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
 			       unsigned long arg)
 {
 	struct rpmsg_eptdev *eptdev = fp->private_data;
+	int ret;
 
-	if (cmd != RPMSG_DESTROY_EPT_IOCTL)
-		return -EINVAL;
+	switch (cmd) {
+	case TIOCMGET:
+		ret = rpmsg_get_signals(eptdev->ept);
+		if (ret >= 0)
+			ret = put_user(ret, (int __user *)arg);
+		break;
+	case TIOCMSET:
+	case TIOCMBIS:
+	case TIOCMBIC:
+		ret = rpmsg_eptdev_tiocmset(fp, cmd, (int __user *)arg);
+		break;
+	case RPMSG_DESTROY_EPT_IOCTL:
+		ret = rpmsg_eptdev_destroy(&eptdev->dev, NULL);
+		break;
+	default:
+		ret = -EINVAL;
+	}
 
-	return rpmsg_eptdev_destroy(&eptdev->dev, NULL);
+	return ret;
 }
 
 static const struct file_operations rpmsg_eptdev_fops = {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH V6 4/4] rpmsg: char: Add signal callback and POLLPRI support
  2020-06-26 14:46 [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Deepak Kumar Singh
                   ` (2 preceding siblings ...)
  2020-06-26 14:46 ` [PATCH V6 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support Deepak Kumar Singh
@ 2020-06-26 14:46 ` Deepak Kumar Singh
  2020-07-06 18:04 ` [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Mathieu Poirier
  4 siblings, 0 replies; 15+ messages in thread
From: Deepak Kumar Singh @ 2020-06-26 14:46 UTC (permalink / raw)
  To: bjorn.andersson, clew, mathieu.poirier
  Cc: linux-arm-msm, linux-remoteproc, linux-kernel,
	Arun Kumar Neelakantam, Deepak Kumar Singh

From: Arun Kumar Neelakantam <aneela@codeaurora.org>

Register a callback to get the signal notifications from rpmsg and
send POLLPRI mask to indicate the signal change in POLL system call.

Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/rpmsg_char.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 43ceac0..64506ca 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -64,6 +64,7 @@ struct rpmsg_ctrldev {
  * @queue_lock:	synchronization of @queue operations
  * @queue:	incoming message queue
  * @readq:	wait object for incoming queue
+ * @sig_pending:state of signal notification
  */
 struct rpmsg_eptdev {
 	struct device dev;
@@ -78,6 +79,8 @@ struct rpmsg_eptdev {
 	spinlock_t queue_lock;
 	struct sk_buff_head queue;
 	wait_queue_head_t readq;
+
+	bool sig_pending;
 };
 
 static int rpmsg_eptdev_destroy(struct device *dev, void *data)
@@ -122,6 +125,19 @@ static int rpmsg_ept_cb(struct rpmsg_device *rpdev, void *buf, int len,
 	return 0;
 }
 
+static int rpmsg_sigs_cb(struct rpmsg_device *rpdev, void *priv,
+			 u32 old, u32 new)
+{
+	struct rpmsg_eptdev *eptdev = priv;
+
+	eptdev->sig_pending = true;
+
+	/* wake up any blocking processes, waiting for signal notification */
+	wake_up_interruptible(&eptdev->readq);
+	return 0;
+}
+
+
 static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
 {
 	struct rpmsg_eptdev *eptdev = cdev_to_eptdev(inode->i_cdev);
@@ -138,6 +154,7 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
 		return -EINVAL;
 	}
 
+	ept->sig_cb = rpmsg_sigs_cb;
 	eptdev->ept = ept;
 	filp->private_data = eptdev;
 
@@ -156,6 +173,7 @@ static int rpmsg_eptdev_release(struct inode *inode, struct file *filp)
 		eptdev->ept = NULL;
 	}
 	mutex_unlock(&eptdev->ept_lock);
+	eptdev->sig_pending = false;
 
 	/* Discard all SKBs */
 	skb_queue_purge(&eptdev->queue);
@@ -266,6 +284,9 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
 	if (!skb_queue_empty(&eptdev->queue))
 		mask |= EPOLLIN | EPOLLRDNORM;
 
+	if (eptdev->sig_pending)
+		mask |= EPOLLPRI;
+
 	mask |= rpmsg_poll(eptdev->ept, filp, wait);
 
 	return mask;
@@ -309,6 +330,7 @@ static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
 
 	switch (cmd) {
 	case TIOCMGET:
+		eptdev->sig_pending = false;
 		ret = rpmsg_get_signals(eptdev->ept);
 		if (ret >= 0)
 			ret = put_user(ret, (int __user *)arg);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* Re: [PATCH V5 0/4] Signaling api support in glink/rpmsg clients
  2020-06-26 14:46 [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Deepak Kumar Singh
                   ` (3 preceding siblings ...)
  2020-06-26 14:46 ` [PATCH V6 4/4] rpmsg: char: Add signal callback and POLLPRI support Deepak Kumar Singh
@ 2020-07-06 18:04 ` Mathieu Poirier
  2020-09-02 16:30   ` Deepak Kumar Singh
  4 siblings, 1 reply; 15+ messages in thread
From: Mathieu Poirier @ 2020-07-06 18:04 UTC (permalink / raw)
  To: Deepak Kumar Singh
  Cc: bjorn.andersson, clew, linux-arm-msm, linux-remoteproc, linux-kernel

Hi Deepak,

On Fri, Jun 26, 2020 at 08:16:55PM +0530, Deepak Kumar Singh wrote:
> Change from version 5
> [V5,4/4] rpmsg: char: Add signal callback and POLLPRI support
> Updated for sparse warning. Replaced POLLPRI => EPOLLPRI to fix
> warning.
> 
> Change from version 4
> I am taking over these patches from aneela@codeaurora.org
> Fixed all the trivial review comments.
> 
> Signal conversion to and from native signal as done in patch V4,2/4
> is intentional.
> 
> Arun Kumar Neelakantam (3):
>   rpmsg: glink: Add support to handle signals command
>   rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
>   rpmsg: char: Add signal callback and POLLPRI support
> 
> Deepak Kumar Singh (1):
>   rpmsg: core: Add signal API support

I'm confused here - V5 (or what I think it is) was sent out on June 24th without
a cover letter.  This set has a cover letter but it is labeled V5.  So is this
the cover letter that should have been sent out on the 24th and the content
herein relevent to that set?  Or is it accurate and the label on the cover
letter of this set is wrong and should have been V6?

I have little confidence in both sets and as such won't be reviewing them.
Please send a new revision that is properly labeled.

Thanks,
Mathieu   


> 
>  drivers/rpmsg/qcom_glink_native.c | 125 ++++++++++++++++++++++++++++++++++++++
>  drivers/rpmsg/rpmsg_char.c        |  76 ++++++++++++++++++++++-
>  drivers/rpmsg/rpmsg_core.c        |  40 ++++++++++++
>  drivers/rpmsg/rpmsg_internal.h    |   5 ++
>  include/linux/rpmsg.h             |  27 ++++++++
>  5 files changed, 270 insertions(+), 3 deletions(-)
> 
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH V5 0/4] Signaling api support in glink/rpmsg clients
  2020-07-06 18:04 ` [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Mathieu Poirier
@ 2020-09-02 16:30   ` Deepak Kumar Singh
  2020-09-02 16:40     ` Mathieu Poirier
  0 siblings, 1 reply; 15+ messages in thread
From: Deepak Kumar Singh @ 2020-09-02 16:30 UTC (permalink / raw)
  To: Mathieu Poirier
  Cc: bjorn.andersson, clew, linux-arm-msm, linux-remoteproc, linux-kernel


On 7/6/2020 11:34 PM, Mathieu Poirier wrote:
> Hi Deepak,
>
> On Fri, Jun 26, 2020 at 08:16:55PM +0530, Deepak Kumar Singh wrote:
>> Change from version 5
>> [V5,4/4] rpmsg: char: Add signal callback and POLLPRI support
>> Updated for sparse warning. Replaced POLLPRI => EPOLLPRI to fix
>> warning.
>>
>> Change from version 4
>> I am taking over these patches from aneela@codeaurora.org
>> Fixed all the trivial review comments.
>>
>> Signal conversion to and from native signal as done in patch V4,2/4
>> is intentional.
>>
>> Arun Kumar Neelakantam (3):
>>    rpmsg: glink: Add support to handle signals command
>>    rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
>>    rpmsg: char: Add signal callback and POLLPRI support
>>
>> Deepak Kumar Singh (1):
>>    rpmsg: core: Add signal API support
> I'm confused here - V5 (or what I think it is) was sent out on June 24th without
> a cover letter.  This set has a cover letter but it is labeled V5.  So is this
> the cover letter that should have been sent out on the 24th and the content
> herein relevent to that set?  Or is it accurate and the label on the cover
> letter of this set is wrong and should have been V6?
>
> I have little confidence in both sets and as such won't be reviewing them.
> Please send a new revision that is properly labeled.
>
> Thanks,
> Mathieu
>
Mistakenly i forgot to update label for cover letter to V6.

I have uploaded patch set V7 with updated cover letter.

There is no change in patches.

>>   drivers/rpmsg/qcom_glink_native.c | 125 ++++++++++++++++++++++++++++++++++++++
>>   drivers/rpmsg/rpmsg_char.c        |  76 ++++++++++++++++++++++-
>>   drivers/rpmsg/rpmsg_core.c        |  40 ++++++++++++
>>   drivers/rpmsg/rpmsg_internal.h    |   5 ++
>>   include/linux/rpmsg.h             |  27 ++++++++
>>   5 files changed, 270 insertions(+), 3 deletions(-)
>>
>> -- 
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> a Linux Foundation Collaborative Project
>>
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH V5 0/4] Signaling api support in glink/rpmsg clients
  2020-09-02 16:30   ` Deepak Kumar Singh
@ 2020-09-02 16:40     ` Mathieu Poirier
  0 siblings, 0 replies; 15+ messages in thread
From: Mathieu Poirier @ 2020-09-02 16:40 UTC (permalink / raw)
  To: Deepak Kumar Singh
  Cc: Bjorn Andersson, Chris Lew, linux-arm-msm, linux-remoteproc,
	Linux Kernel Mailing List

On Wed, 2 Sep 2020 at 10:30, Deepak Kumar Singh <deesin@codeaurora.org> wrote:
>
>
> On 7/6/2020 11:34 PM, Mathieu Poirier wrote:
> > Hi Deepak,
> >
> > On Fri, Jun 26, 2020 at 08:16:55PM +0530, Deepak Kumar Singh wrote:
> >> Change from version 5
> >> [V5,4/4] rpmsg: char: Add signal callback and POLLPRI support
> >> Updated for sparse warning. Replaced POLLPRI => EPOLLPRI to fix
> >> warning.
> >>
> >> Change from version 4
> >> I am taking over these patches from aneela@codeaurora.org
> >> Fixed all the trivial review comments.
> >>
> >> Signal conversion to and from native signal as done in patch V4,2/4
> >> is intentional.
> >>
> >> Arun Kumar Neelakantam (3):
> >>    rpmsg: glink: Add support to handle signals command
> >>    rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
> >>    rpmsg: char: Add signal callback and POLLPRI support
> >>
> >> Deepak Kumar Singh (1):
> >>    rpmsg: core: Add signal API support
> > I'm confused here - V5 (or what I think it is) was sent out on June 24th without
> > a cover letter.  This set has a cover letter but it is labeled V5.  So is this
> > the cover letter that should have been sent out on the 24th and the content
> > herein relevent to that set?  Or is it accurate and the label on the cover
> > letter of this set is wrong and should have been V6?
> >
> > I have little confidence in both sets and as such won't be reviewing them.
> > Please send a new revision that is properly labeled.
> >
> > Thanks,
> > Mathieu
> >
> Mistakenly i forgot to update label for cover letter to V6.
>
> I have uploaded patch set V7 with updated cover letter.

Thank you for doing that - I have added your set to my list of patches
to review.  Note that I have a fair amount of patches to go over
lately and as such getting to yours will take some time.

Regards,
Mathieu

>
> There is no change in patches.
>
> >>   drivers/rpmsg/qcom_glink_native.c | 125 ++++++++++++++++++++++++++++++++++++++
> >>   drivers/rpmsg/rpmsg_char.c        |  76 ++++++++++++++++++++++-
> >>   drivers/rpmsg/rpmsg_core.c        |  40 ++++++++++++
> >>   drivers/rpmsg/rpmsg_internal.h    |   5 ++
> >>   include/linux/rpmsg.h             |  27 ++++++++
> >>   5 files changed, 270 insertions(+), 3 deletions(-)
> >>
> >> --
> >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> >> a Linux Foundation Collaborative Project
> >>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
>

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH V3 0/2] soc: qcom: aoss: Expose send for generic usecase
@ 2021-05-06 17:06 Deepak Kumar Singh
  2021-05-06 17:06 ` [PATCH V3 1/2] " Deepak Kumar Singh
  2021-05-06 17:06 ` [PATCH V3 2/2] soc: qcom: aoss: Add debugfs entry Deepak Kumar Singh
  0 siblings, 2 replies; 15+ messages in thread
From: Deepak Kumar Singh @ 2021-05-06 17:06 UTC (permalink / raw)
  To: bjorn.andersson, clew, sibis, manivannan.sadhasivam
  Cc: linux-kernel, linux-arm-msm, linux-remoteproc, Deepak Kumar Singh

[Change from V2]
Remove devm memory allocation
Use refcount for qmp handle
Update qmp_get/qmp_put/qmp_remove function with refcount logic

Deepak Kumar Singh (2):
  soc: qcom: aoss: Expose send for generic usecase
  soc: qcom: aoss: Add debugfs entry

 drivers/soc/qcom/qcom_aoss.c       | 109 ++++++++++++++++++++++++++++++++++++-
 include/linux/soc/qcom/qcom_aoss.h |  33 +++++++++++
 2 files changed, 140 insertions(+), 2 deletions(-)
 create mode 100644 include/linux/soc/qcom/qcom_aoss.h

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH V3 1/2] soc: qcom: aoss: Expose send for generic usecase
  2021-05-06 17:06 [PATCH V3 0/2] soc: qcom: aoss: Expose send for generic usecase Deepak Kumar Singh
@ 2021-05-06 17:06 ` Deepak Kumar Singh
  2021-05-28  3:32   ` Bjorn Andersson
  2021-06-07 11:42   ` Sibi Sankar
  2021-05-06 17:06 ` [PATCH V3 2/2] soc: qcom: aoss: Add debugfs entry Deepak Kumar Singh
  1 sibling, 2 replies; 15+ messages in thread
From: Deepak Kumar Singh @ 2021-05-06 17:06 UTC (permalink / raw)
  To: bjorn.andersson, clew, sibis, manivannan.sadhasivam
  Cc: linux-kernel, linux-arm-msm, linux-remoteproc,
	Deepak Kumar Singh, Andy Gross

Not all upcoming usecases will have an interface to allow the aoss
driver to hook onto. Expose the send api and create a get function to
enable drivers to send their own messages to aoss.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
---
 drivers/soc/qcom/qcom_aoss.c       | 70 ++++++++++++++++++++++++++++++++++++--
 include/linux/soc/qcom/qcom_aoss.h | 33 ++++++++++++++++++
 2 files changed, 101 insertions(+), 2 deletions(-)
 create mode 100644 include/linux/soc/qcom/qcom_aoss.h

diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 53acb94..cd75d4d 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -8,10 +8,12 @@
 #include <linux/io.h>
 #include <linux/mailbox_client.h>
 #include <linux/module.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/thermal.h>
 #include <linux/slab.h>
+#include <linux/soc/qcom/qcom_aoss.h>
 
 #define QMP_DESC_MAGIC			0x0
 #define QMP_DESC_VERSION		0x4
@@ -61,6 +63,7 @@ struct qmp_cooling_device {
  * @mbox_chan: mailbox channel used to ring the doorbell on transmit
  * @offset: offset within @msgram where messages should be written
  * @size: maximum size of the messages to be transmitted
+ * @orphan: tarcks whether qmp handle is valid
  * @event: wait_queue for synchronization with the IRQ
  * @tx_lock: provides synchronization between multiple callers of qmp_send()
  * @qdss_clk: QDSS clock hw struct
@@ -76,6 +79,8 @@ struct qmp {
 
 	size_t offset;
 	size_t size;
+	atomic_t  orphan;
+	struct kref refcount;
 
 	wait_queue_head_t event;
 
@@ -223,11 +228,17 @@ static bool qmp_message_empty(struct qmp *qmp)
  *
  * Return: 0 on success, negative errno on failure
  */
-static int qmp_send(struct qmp *qmp, const void *data, size_t len)
+int qmp_send(struct qmp *qmp, const void *data, size_t len)
 {
 	long time_left;
 	int ret;
 
+	if (WARN_ON(IS_ERR_OR_NULL(qmp) || !data))
+		return -EINVAL;
+
+	if (atomic_read(&qmp->orphan))
+		return -EINVAL;
+
 	if (WARN_ON(len + sizeof(u32) > qmp->size))
 		return -EINVAL;
 
@@ -261,6 +272,7 @@ static int qmp_send(struct qmp *qmp, const void *data, size_t len)
 
 	return ret;
 }
+EXPORT_SYMBOL(qmp_send);
 
 static int qmp_qdss_clk_prepare(struct clk_hw *hw)
 {
@@ -515,6 +527,54 @@ static void qmp_cooling_devices_remove(struct qmp *qmp)
 		thermal_cooling_device_unregister(qmp->cooling_devs[i].cdev);
 }
 
+/**
+ * qmp_get() - get a qmp handle from a device
+ * @dev: client device pointer
+ *
+ * Return: handle to qmp device on success, ERR_PTR() on failure
+ */
+struct qmp *qmp_get(struct device *dev)
+{
+	struct platform_device *pdev;
+	struct device_node *np;
+	struct qmp *qmp;
+
+	if (!dev || !dev->of_node)
+		return ERR_PTR(-EINVAL);
+
+	np = of_parse_phandle(dev->of_node, "qcom,qmp", 0);
+	if (!np)
+		return ERR_PTR(-ENODEV);
+
+	pdev = of_find_device_by_node(np);
+	of_node_put(np);
+	if (!pdev)
+		return ERR_PTR(-EINVAL);
+
+	qmp = platform_get_drvdata(pdev);
+	platform_device_put(pdev);
+
+	if (qmp)
+		kref_get(&qmp->refcount);
+
+	return qmp ? qmp : ERR_PTR(-EPROBE_DEFER);
+}
+EXPORT_SYMBOL(qmp_get);
+
+static void qmp_handle_release(struct kref *ref)
+{
+	struct qmp *qmp = container_of(ref, struct qmp, refcount);
+
+	kfree(qmp);
+}
+
+void qmp_put(struct qmp *qmp)
+{
+	if (!IS_ERR_OR_NULL(qmp))
+		kref_put(&qmp->refcount, qmp_handle_release);
+}
+EXPORT_SYMBOL(qmp_put);
+
 static int qmp_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -522,13 +582,14 @@ static int qmp_probe(struct platform_device *pdev)
 	int irq;
 	int ret;
 
-	qmp = devm_kzalloc(&pdev->dev, sizeof(*qmp), GFP_KERNEL);
+	qmp = kzalloc(sizeof(*qmp), GFP_KERNEL);
 	if (!qmp)
 		return -ENOMEM;
 
 	qmp->dev = &pdev->dev;
 	init_waitqueue_head(&qmp->event);
 	mutex_init(&qmp->tx_lock);
+	kref_init(&qmp->refcount);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	qmp->msgram = devm_ioremap_resource(&pdev->dev, res);
@@ -569,6 +630,8 @@ static int qmp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, qmp);
 
+	atomic_set(&qmp->orphan, 0);
+
 	return 0;
 
 err_remove_qdss_clk:
@@ -577,6 +640,7 @@ static int qmp_probe(struct platform_device *pdev)
 	qmp_close(qmp);
 err_free_mbox:
 	mbox_free_channel(qmp->mbox_chan);
+	kfree(qmp);
 
 	return ret;
 }
@@ -590,7 +654,9 @@ static int qmp_remove(struct platform_device *pdev)
 	qmp_cooling_devices_remove(qmp);
 
 	qmp_close(qmp);
+	atomic_set(&qmp->orphan, 1);
 	mbox_free_channel(qmp->mbox_chan);
+	kref_put(&qmp->refcount, qmp_handle_release);
 
 	return 0;
 }
diff --git a/include/linux/soc/qcom/qcom_aoss.h b/include/linux/soc/qcom/qcom_aoss.h
new file mode 100644
index 0000000..27d00f7
--- /dev/null
+++ b/include/linux/soc/qcom/qcom_aoss.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __QCOM_AOSS_H__
+#define __QCOM_AOSS_H__
+
+#include <linux/err.h>
+#include <linux/device.h>
+
+struct qmp;
+
+#if IS_ENABLED(CONFIG_QCOM_AOSS_QMP)
+
+int qmp_send(struct qmp *qmp, const void *data, size_t len);
+struct qmp *qmp_get(struct device *dev);
+
+#else
+
+static inline int qmp_send(struct qmp *qmp, const void *data, size_t len)
+{
+	return -ENODEV;
+}
+
+static inline struct qmp *qmp_get(struct device *dev)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+#endif
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH V3 2/2] soc: qcom: aoss: Add debugfs entry
  2021-05-06 17:06 [PATCH V3 0/2] soc: qcom: aoss: Expose send for generic usecase Deepak Kumar Singh
  2021-05-06 17:06 ` [PATCH V3 1/2] " Deepak Kumar Singh
@ 2021-05-06 17:06 ` Deepak Kumar Singh
  1 sibling, 0 replies; 15+ messages in thread
From: Deepak Kumar Singh @ 2021-05-06 17:06 UTC (permalink / raw)
  To: bjorn.andersson, clew, sibis, manivannan.sadhasivam
  Cc: linux-kernel, linux-arm-msm, linux-remoteproc,
	Deepak Kumar Singh, Andy Gross

It can be useful to control the different power states of various
parts of hardware for device testing. Add a debugfs node for qmp so
messages can be sent to aoss for debugging and testing purposes.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
---
 drivers/soc/qcom/qcom_aoss.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index cd75d4d..438adc9 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -4,6 +4,7 @@
  */
 #include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <linux/clk-provider.h>
+#include <linux/debugfs.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/mailbox_client.h>
@@ -89,6 +90,9 @@ struct qmp {
 	struct clk_hw qdss_clk;
 	struct genpd_onecell_data pd_data;
 	struct qmp_cooling_device *cooling_devs;
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+	struct dentry *debugfs_file;
+#endif /* CONFIG_DEBUG_FS */
 };
 
 struct qmp_pd {
@@ -575,6 +579,32 @@ void qmp_put(struct qmp *qmp)
 }
 EXPORT_SYMBOL(qmp_put);
 
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+static ssize_t aoss_dbg_write(struct file *file, const char __user *userstr,
+			      size_t len, loff_t *pos)
+{
+	struct qmp *qmp = file->private_data;
+	char buf[QMP_MSG_LEN] = {};
+	int ret;
+
+	if (!len || len >= QMP_MSG_LEN)
+		return len;
+
+	ret  = copy_from_user(buf, userstr, len);
+	if (ret)
+		return len;
+
+	ret = qmp_send(qmp, buf, QMP_MSG_LEN);
+
+	return ret ? ret : len;
+}
+
+static const struct file_operations aoss_dbg_fops = {
+	.open = simple_open,
+	.write = aoss_dbg_write,
+};
+#endif /* CONFIG_DEBUG_FS */
+
 static int qmp_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -632,6 +662,11 @@ static int qmp_probe(struct platform_device *pdev)
 
 	atomic_set(&qmp->orphan, 0);
 
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+	qmp->debugfs_file = debugfs_create_file("aoss_send_message", 0220, NULL,
+						qmp, &aoss_dbg_fops);
+#endif /* CONFIG_DEBUG_FS */
+
 	return 0;
 
 err_remove_qdss_clk:
@@ -649,6 +684,10 @@ static int qmp_remove(struct platform_device *pdev)
 {
 	struct qmp *qmp = platform_get_drvdata(pdev);
 
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+	debugfs_remove(qmp->debugfs_file);
+#endif /* CONFIG_DEBUG_FS */
+
 	qmp_qdss_clk_remove(qmp);
 	qmp_pd_remove(qmp);
 	qmp_cooling_devices_remove(qmp);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* Re: [PATCH V6 2/4] rpmsg: glink: Add support to handle signals command
  2020-06-26 14:46 ` [PATCH V6 2/4] rpmsg: glink: Add support to handle signals command Deepak Kumar Singh
@ 2021-05-06 17:17   ` Deepak Kumar Singh
  0 siblings, 0 replies; 15+ messages in thread
From: Deepak Kumar Singh @ 2021-05-06 17:17 UTC (permalink / raw)
  To: bjorn.andersson, clew, sibis, manivannan.sadhasivam, mathieu.poirier
  Cc: linux-kernel, linux-arm-msm, linux-remoteproc,
	Arun Kumar Neelakantam, Andy Gross, Ohad Ben-Cohen

Please ignore this instance. Wrongly pushed.

On 5/6/2021 10:36 PM, Deepak Kumar Singh wrote:
> From: Arun Kumar Neelakantam <aneela@codeaurora.org>
>
> Remote peripherals send signal notifications over glink with commandID 15.
>
> Add support to send and receive the signal command and convert the signals
> from NATIVE to TIOCM while receiving and vice versa while sending.
>
> Signed-off-by: Chris Lew <clew@codeaurora.org>
> Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
> ---
>   drivers/rpmsg/qcom_glink_native.c | 125 ++++++++++++++++++++++++++++++++++++++
>   1 file changed, 125 insertions(+)
>
> diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
> index 0e8a28c0..1bf3235 100644
> --- a/drivers/rpmsg/qcom_glink_native.c
> +++ b/drivers/rpmsg/qcom_glink_native.c
> @@ -17,6 +17,7 @@
>   #include <linux/rpmsg.h>
>   #include <linux/sizes.h>
>   #include <linux/slab.h>
> +#include <linux/termios.h>
>   #include <linux/workqueue.h>
>   #include <linux/mailbox_client.h>
>   
> @@ -150,6 +151,8 @@ enum {
>    * @intent_req_lock: Synchronises multiple intent requests
>    * @intent_req_result: Result of intent request
>    * @intent_req_comp: Completion for intent_req signalling
> + * @lsigs:	local side signals
> + * @rsigs:	remote side signals
>    */
>   struct glink_channel {
>   	struct rpmsg_endpoint ept;
> @@ -181,6 +184,10 @@ struct glink_channel {
>   	struct mutex intent_req_lock;
>   	bool intent_req_result;
>   	struct completion intent_req_comp;
> +
> +	unsigned int lsigs;
> +	unsigned int rsigs;
> +
>   };
>   
>   #define to_glink_channel(_ept) container_of(_ept, struct glink_channel, ept)
> @@ -201,9 +208,15 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops;
>   #define RPM_CMD_TX_DATA_CONT		12
>   #define RPM_CMD_READ_NOTIF		13
>   #define RPM_CMD_RX_DONE_W_REUSE		14
> +#define RPM_CMD_SIGNALS			15
>   
>   #define GLINK_FEATURE_INTENTLESS	BIT(1)
>   
> +#define NATIVE_DTR_SIG			BIT(31)
> +#define NATIVE_CTS_SIG			BIT(30)
> +#define NATIVE_CD_SIG			BIT(29)
> +#define NATIVE_RI_SIG			BIT(28)
> +
>   static void qcom_glink_rx_done_work(struct work_struct *work);
>   
>   static struct glink_channel *qcom_glink_alloc_channel(struct qcom_glink *glink,
> @@ -975,6 +988,76 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid)
>   	return 0;
>   }
>   
> +/**
> + * qcom_glink_send_signals() - convert a signal cmd to wire format and transmit
> + * @glink:	The transport to transmit on.
> + * @channel:	The glink channel
> + * @sigs:	The signals to encode.
> + *
> + * Return: 0 on success or standard Linux error code.
> + */
> +static int qcom_glink_send_signals(struct qcom_glink *glink,
> +				   struct glink_channel *channel,
> +				   u32 sigs)
> +{
> +	struct glink_msg msg;
> +
> +	/* convert signals from TIOCM to NATIVE */
> +	sigs &= 0x0fff;
> +	if (sigs & TIOCM_DTR)
> +		sigs |= NATIVE_DTR_SIG;
> +	if (sigs & TIOCM_RTS)
> +		sigs |= NATIVE_CTS_SIG;
> +	if (sigs & TIOCM_CD)
> +		sigs |= NATIVE_CD_SIG;
> +	if (sigs & TIOCM_RI)
> +		sigs |= NATIVE_RI_SIG;
> +
> +	msg.cmd = cpu_to_le16(RPM_CMD_SIGNALS);
> +	msg.param1 = cpu_to_le16(channel->lcid);
> +	msg.param2 = cpu_to_le32(sigs);
> +
> +	return qcom_glink_tx(glink, &msg, sizeof(msg), NULL, 0, true);
> +}
> +
> +static int qcom_glink_handle_signals(struct qcom_glink *glink,
> +				     unsigned int rcid, unsigned int signals)
> +{
> +	struct glink_channel *channel;
> +	unsigned long flags;
> +	u32 old;
> +
> +	spin_lock_irqsave(&glink->idr_lock, flags);
> +	channel = idr_find(&glink->rcids, rcid);
> +	spin_unlock_irqrestore(&glink->idr_lock, flags);
> +	if (!channel) {
> +		dev_err(glink->dev, "signal for non-existing channel\n");
> +		return -EINVAL;
> +	}
> +
> +	old = channel->rsigs;
> +
> +	/* convert signals from NATIVE to TIOCM */
> +	if (signals & NATIVE_DTR_SIG)
> +		signals |= TIOCM_DSR;
> +	if (signals & NATIVE_CTS_SIG)
> +		signals |= TIOCM_CTS;
> +	if (signals & NATIVE_CD_SIG)
> +		signals |= TIOCM_CD;
> +	if (signals & NATIVE_RI_SIG)
> +		signals |= TIOCM_RI;
> +	signals &= 0x0fff;
> +
> +	channel->rsigs = signals;
> +
> +	if (channel->ept.sig_cb) {
> +		channel->ept.sig_cb(channel->ept.rpdev, channel->ept.priv,
> +				    old, channel->rsigs);
> +	}
> +
> +	return 0;
> +}
> +
>   static irqreturn_t qcom_glink_native_intr(int irq, void *data)
>   {
>   	struct qcom_glink *glink = data;
> @@ -1036,6 +1119,10 @@ static irqreturn_t qcom_glink_native_intr(int irq, void *data)
>   			qcom_glink_handle_intent_req_ack(glink, param1, param2);
>   			qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
>   			break;
> +		case RPM_CMD_SIGNALS:
> +			qcom_glink_handle_signals(glink, param1, param2);
> +			qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
> +			break;
>   		default:
>   			dev_err(glink->dev, "unhandled rx cmd: %d\n", cmd);
>   			ret = -EINVAL;
> @@ -1332,6 +1419,42 @@ static int qcom_glink_trysend(struct rpmsg_endpoint *ept, void *data, int len)
>   	return __qcom_glink_send(channel, data, len, false);
>   }
>   
> +static int qcom_glink_get_sigs(struct rpmsg_endpoint *ept)
> +{
> +	struct glink_channel *channel = to_glink_channel(ept);
> +
> +	return channel->rsigs;
> +}
> +
> +static int qcom_glink_set_sigs(struct rpmsg_endpoint *ept, u32 set, u32 clear)
> +{
> +	struct glink_channel *channel = to_glink_channel(ept);
> +	struct qcom_glink *glink = channel->glink;
> +	u32 sigs = channel->lsigs;
> +
> +	if (set & TIOCM_DTR)
> +		sigs |= TIOCM_DTR;
> +	if (set & TIOCM_RTS)
> +		sigs |= TIOCM_RTS;
> +	if (set & TIOCM_CD)
> +		sigs |= TIOCM_CD;
> +	if (set & TIOCM_RI)
> +		sigs |= TIOCM_RI;
> +
> +	if (clear & TIOCM_DTR)
> +		sigs &= ~TIOCM_DTR;
> +	if (clear & TIOCM_RTS)
> +		sigs &= ~TIOCM_RTS;
> +	if (clear & TIOCM_CD)
> +		sigs &= ~TIOCM_CD;
> +	if (clear & TIOCM_RI)
> +		sigs &= ~TIOCM_RI;
> +
> +	channel->lsigs = sigs;
> +
> +	return qcom_glink_send_signals(glink, channel, sigs);
> +}
> +
>   /*
>    * Finds the device_node for the glink child interested in this channel.
>    */
> @@ -1365,6 +1488,8 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops = {
>   	.destroy_ept = qcom_glink_destroy_ept,
>   	.send = qcom_glink_send,
>   	.trysend = qcom_glink_trysend,
> +	.get_signals = qcom_glink_get_sigs,
> +	.set_signals = qcom_glink_set_sigs,
>   };
>   
>   static void qcom_glink_rpdev_release(struct device *dev)
>

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH V6 1/4] rpmsg: core: Add signal API support
  2020-06-26 14:46 ` [PATCH V6 1/4] rpmsg: core: Add signal API support Deepak Kumar Singh
@ 2021-05-06 17:18   ` Deepak Kumar Singh
  0 siblings, 0 replies; 15+ messages in thread
From: Deepak Kumar Singh @ 2021-05-06 17:18 UTC (permalink / raw)
  To: bjorn.andersson, clew, sibis, manivannan.sadhasivam, mathieu.poirier
  Cc: linux-kernel, linux-arm-msm, linux-remoteproc,
	Arun Kumar Neelakantam, Ohad Ben-Cohen

Please ignore V6 patch set for rpmsg: core: Add signal API support.

Wrongly pushed.

On 5/6/2021 10:36 PM, Deepak Kumar Singh wrote:
> Some transports like Glink support the state notifications between
> clients using signals similar to serial protocol signals.
> Local glink client drivers can send and receive signals to glink
> clients running on remote processors.
>
> Add apis to support sending and receiving of signals by rpmsg clients.
>
> Signed-off-by: Chris Lew <clew@codeaurora.org>
> Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
> ---
>   drivers/rpmsg/rpmsg_core.c     | 40 ++++++++++++++++++++++++++++++++++++++++
>   drivers/rpmsg/rpmsg_internal.h |  5 +++++
>   include/linux/rpmsg.h          | 27 +++++++++++++++++++++++++++
>   3 files changed, 72 insertions(+)
>
> diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
> index 91de940..e6eb5a1 100644
> --- a/drivers/rpmsg/rpmsg_core.c
> +++ b/drivers/rpmsg/rpmsg_core.c
> @@ -283,6 +283,42 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
>   }
>   EXPORT_SYMBOL(rpmsg_trysend_offchannel);
>   
> +/**
> + * rpmsg_get_signals() - get the signals for this endpoint
> + * @ept:	the rpmsg endpoint
> + *
> + * Returns signal bits on success and an appropriate error value on failure.
> + */
> +int rpmsg_get_signals(struct rpmsg_endpoint *ept)
> +{
> +	if (WARN_ON(!ept))
> +		return -EINVAL;
> +	if (!ept->ops->get_signals)
> +		return -ENXIO;
> +
> +	return ept->ops->get_signals(ept);
> +}
> +EXPORT_SYMBOL(rpmsg_get_signals);
> +
> +/**
> + * rpmsg_set_signals() - set the remote signals for this endpoint
> + * @ept:	the rpmsg endpoint
> + * @set:	set mask for signals
> + * @clear:	clear mask for signals
> + *
> + * Returns 0 on success and an appropriate error value on failure.
> + */
> +int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear)
> +{
> +	if (WARN_ON(!ept))
> +		return -EINVAL;
> +	if (!ept->ops->set_signals)
> +		return -ENXIO;
> +
> +	return ept->ops->set_signals(ept, set, clear);
> +}
> +EXPORT_SYMBOL(rpmsg_set_signals);
> +
>   /*
>    * match a rpmsg channel with a channel info struct.
>    * this is used to make sure we're not creating rpmsg devices for channels
> @@ -468,6 +504,10 @@ static int rpmsg_dev_probe(struct device *dev)
>   
>   		rpdev->ept = ept;
>   		rpdev->src = ept->addr;
> +
> +		if (rpdrv->signals)
> +			ept->sig_cb = rpdrv->signals;
> +
>   	}
>   
>   	err = rpdrv->probe(rpdev);
> diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
> index 3fc83cd..8958d6c 100644
> --- a/drivers/rpmsg/rpmsg_internal.h
> +++ b/drivers/rpmsg/rpmsg_internal.h
> @@ -2,6 +2,7 @@
>   /*
>    * remote processor messaging bus internals
>    *
> + * Copyright (c) 2018, The Linux Foundation.
>    * Copyright (C) 2011 Texas Instruments, Inc.
>    * Copyright (C) 2011 Google, Inc.
>    *
> @@ -47,6 +48,8 @@ struct rpmsg_device_ops {
>    * @trysendto:		see @rpmsg_trysendto(), optional
>    * @trysend_offchannel:	see @rpmsg_trysend_offchannel(), optional
>    * @poll:		see @rpmsg_poll(), optional
> + * @get_signals:	see @rpmsg_get_signals(), optional
> + * @set_signals:	see @rpmsg_set_signals(), optional
>    *
>    * Indirection table for the operations that a rpmsg backend should implement.
>    * In addition to @destroy_ept, the backend must at least implement @send and
> @@ -66,6 +69,8 @@ struct rpmsg_endpoint_ops {
>   			     void *data, int len);
>   	__poll_t (*poll)(struct rpmsg_endpoint *ept, struct file *filp,
>   			     poll_table *wait);
> +	int (*get_signals)(struct rpmsg_endpoint *ept);
> +	int (*set_signals)(struct rpmsg_endpoint *ept, u32 set, u32 clear);
>   };
>   
>   int rpmsg_register_device(struct rpmsg_device *rpdev);
> diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
> index 9fe156d..c4dbb47 100644
> --- a/include/linux/rpmsg.h
> +++ b/include/linux/rpmsg.h
> @@ -2,6 +2,7 @@
>   /*
>    * Remote processor messaging
>    *
> + * Copyright (c) 2018 The Linux Foundation.
>    * Copyright (C) 2011 Texas Instruments, Inc.
>    * Copyright (C) 2011 Google, Inc.
>    * All rights reserved.
> @@ -60,6 +61,7 @@ struct rpmsg_device {
>   };
>   
>   typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
> +typedef int (*rpmsg_rx_sig_t)(struct rpmsg_device *, void *, u32, u32);
>   
>   /**
>    * struct rpmsg_endpoint - binds a local rpmsg address to its user
> @@ -67,6 +69,7 @@ typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
>    * @refcount: when this drops to zero, the ept is deallocated
>    * @cb: rx callback handler
>    * @cb_lock: must be taken before accessing/changing @cb
> + * @sig_cb: rx serial signal handler
>    * @addr: local rpmsg address
>    * @priv: private data for the driver's use
>    *
> @@ -89,6 +92,7 @@ struct rpmsg_endpoint {
>   	struct kref refcount;
>   	rpmsg_rx_cb_t cb;
>   	struct mutex cb_lock;
> +	rpmsg_rx_sig_t sig_cb;
>   	u32 addr;
>   	void *priv;
>   
> @@ -102,6 +106,7 @@ struct rpmsg_endpoint {
>    * @probe: invoked when a matching rpmsg channel (i.e. device) is found
>    * @remove: invoked when the rpmsg channel is removed
>    * @callback: invoked when an inbound message is received on the channel
> + * @signals: invoked when a serial signal change is received on the channel
>    */
>   struct rpmsg_driver {
>   	struct device_driver drv;
> @@ -109,6 +114,8 @@ struct rpmsg_driver {
>   	int (*probe)(struct rpmsg_device *dev);
>   	void (*remove)(struct rpmsg_device *dev);
>   	int (*callback)(struct rpmsg_device *, void *, int, void *, u32);
> +	int (*signals)(struct rpmsg_device *rpdev,
> +		       void *priv, u32 old, u32 new);
>   };
>   
>   #if IS_ENABLED(CONFIG_RPMSG)
> @@ -135,6 +142,9 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
>   __poll_t rpmsg_poll(struct rpmsg_endpoint *ept, struct file *filp,
>   			poll_table *wait);
>   
> +int rpmsg_get_signals(struct rpmsg_endpoint *ept);
> +int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear);
> +
>   #else
>   
>   static inline int register_rpmsg_device(struct rpmsg_device *dev)
> @@ -242,6 +252,23 @@ static inline __poll_t rpmsg_poll(struct rpmsg_endpoint *ept,
>   	return 0;
>   }
>   
> +static inline int rpmsg_get_signals(struct rpmsg_endpoint *ept)
> +{
> +	/* This shouldn't be possible */
> +	WARN_ON(1);
> +
> +	return -ENXIO;
> +}
> +
> +static inline int rpmsg_set_signals(struct rpmsg_endpoint *ept,
> +				    u32 set, u32 clear)
> +{
> +	/* This shouldn't be possible */
> +	WARN_ON(1);
> +
> +	return -ENXIO;
> +}
> +
>   #endif /* IS_ENABLED(CONFIG_RPMSG) */
>   
>   /* use a macro to avoid include chaining to get THIS_MODULE */
>

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH V3 1/2] soc: qcom: aoss: Expose send for generic usecase
  2021-05-06 17:06 ` [PATCH V3 1/2] " Deepak Kumar Singh
@ 2021-05-28  3:32   ` Bjorn Andersson
  2021-06-07 11:42   ` Sibi Sankar
  1 sibling, 0 replies; 15+ messages in thread
From: Bjorn Andersson @ 2021-05-28  3:32 UTC (permalink / raw)
  To: Deepak Kumar Singh
  Cc: clew, sibis, manivannan.sadhasivam, linux-kernel, linux-arm-msm,
	linux-remoteproc, Andy Gross

On Thu 06 May 12:06 CDT 2021, Deepak Kumar Singh wrote:

> Not all upcoming usecases will have an interface to allow the aoss
> driver to hook onto. Expose the send api and create a get function to
> enable drivers to send their own messages to aoss.
> 
> Signed-off-by: Chris Lew <clew@codeaurora.org>
> Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/soc/qcom/qcom_aoss.c       | 70 ++++++++++++++++++++++++++++++++++++--
>  include/linux/soc/qcom/qcom_aoss.h | 33 ++++++++++++++++++
>  2 files changed, 101 insertions(+), 2 deletions(-)
>  create mode 100644 include/linux/soc/qcom/qcom_aoss.h
> 
> diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
> index 53acb94..cd75d4d 100644
> --- a/drivers/soc/qcom/qcom_aoss.c
> +++ b/drivers/soc/qcom/qcom_aoss.c
> @@ -8,10 +8,12 @@
>  #include <linux/io.h>
>  #include <linux/mailbox_client.h>
>  #include <linux/module.h>
> +#include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_domain.h>
>  #include <linux/thermal.h>
>  #include <linux/slab.h>
> +#include <linux/soc/qcom/qcom_aoss.h>
>  
>  #define QMP_DESC_MAGIC			0x0
>  #define QMP_DESC_VERSION		0x4
> @@ -61,6 +63,7 @@ struct qmp_cooling_device {
>   * @mbox_chan: mailbox channel used to ring the doorbell on transmit
>   * @offset: offset within @msgram where messages should be written
>   * @size: maximum size of the messages to be transmitted
> + * @orphan: tarcks whether qmp handle is valid
>   * @event: wait_queue for synchronization with the IRQ
>   * @tx_lock: provides synchronization between multiple callers of qmp_send()
>   * @qdss_clk: QDSS clock hw struct
> @@ -76,6 +79,8 @@ struct qmp {
>  
>  	size_t offset;
>  	size_t size;
> +	atomic_t  orphan;
> +	struct kref refcount;
>  
>  	wait_queue_head_t event;
>  
> @@ -223,11 +228,17 @@ static bool qmp_message_empty(struct qmp *qmp)
>   *
>   * Return: 0 on success, negative errno on failure
>   */
> -static int qmp_send(struct qmp *qmp, const void *data, size_t len)
> +int qmp_send(struct qmp *qmp, const void *data, size_t len)
>  {
>  	long time_left;
>  	int ret;
>  
> +	if (WARN_ON(IS_ERR_OR_NULL(qmp) || !data))
> +		return -EINVAL;
> +
> +	if (atomic_read(&qmp->orphan))
> +		return -EINVAL;
> +
>  	if (WARN_ON(len + sizeof(u32) > qmp->size))
>  		return -EINVAL;
>  
> @@ -261,6 +272,7 @@ static int qmp_send(struct qmp *qmp, const void *data, size_t len)
>  
>  	return ret;
>  }
> +EXPORT_SYMBOL(qmp_send);
>  
>  static int qmp_qdss_clk_prepare(struct clk_hw *hw)
>  {
> @@ -515,6 +527,54 @@ static void qmp_cooling_devices_remove(struct qmp *qmp)
>  		thermal_cooling_device_unregister(qmp->cooling_devs[i].cdev);
>  }
>  
> +/**
> + * qmp_get() - get a qmp handle from a device
> + * @dev: client device pointer
> + *
> + * Return: handle to qmp device on success, ERR_PTR() on failure
> + */
> +struct qmp *qmp_get(struct device *dev)
> +{
> +	struct platform_device *pdev;
> +	struct device_node *np;
> +	struct qmp *qmp;
> +
> +	if (!dev || !dev->of_node)
> +		return ERR_PTR(-EINVAL);
> +
> +	np = of_parse_phandle(dev->of_node, "qcom,qmp", 0);
> +	if (!np)
> +		return ERR_PTR(-ENODEV);
> +
> +	pdev = of_find_device_by_node(np);
> +	of_node_put(np);
> +	if (!pdev)
> +		return ERR_PTR(-EINVAL);
> +
> +	qmp = platform_get_drvdata(pdev);
> +	platform_device_put(pdev);
> +
> +	if (qmp)
> +		kref_get(&qmp->refcount);
> +
> +	return qmp ? qmp : ERR_PTR(-EPROBE_DEFER);
> +}
> +EXPORT_SYMBOL(qmp_get);
> +
> +static void qmp_handle_release(struct kref *ref)
> +{
> +	struct qmp *qmp = container_of(ref, struct qmp, refcount);
> +
> +	kfree(qmp);
> +}
> +
> +void qmp_put(struct qmp *qmp)
> +{
> +	if (!IS_ERR_OR_NULL(qmp))
> +		kref_put(&qmp->refcount, qmp_handle_release);
> +}
> +EXPORT_SYMBOL(qmp_put);
> +
>  static int qmp_probe(struct platform_device *pdev)
>  {
>  	struct resource *res;
> @@ -522,13 +582,14 @@ static int qmp_probe(struct platform_device *pdev)
>  	int irq;
>  	int ret;
>  
> -	qmp = devm_kzalloc(&pdev->dev, sizeof(*qmp), GFP_KERNEL);
> +	qmp = kzalloc(sizeof(*qmp), GFP_KERNEL);
>  	if (!qmp)
>  		return -ENOMEM;
>  
>  	qmp->dev = &pdev->dev;
>  	init_waitqueue_head(&qmp->event);
>  	mutex_init(&qmp->tx_lock);
> +	kref_init(&qmp->refcount);
>  
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	qmp->msgram = devm_ioremap_resource(&pdev->dev, res);
> @@ -569,6 +630,8 @@ static int qmp_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, qmp);
>  
> +	atomic_set(&qmp->orphan, 0);
> +
>  	return 0;
>  
>  err_remove_qdss_clk:
> @@ -577,6 +640,7 @@ static int qmp_probe(struct platform_device *pdev)
>  	qmp_close(qmp);
>  err_free_mbox:
>  	mbox_free_channel(qmp->mbox_chan);
> +	kfree(qmp);
>  
>  	return ret;
>  }
> @@ -590,7 +654,9 @@ static int qmp_remove(struct platform_device *pdev)
>  	qmp_cooling_devices_remove(qmp);
>  
>  	qmp_close(qmp);
> +	atomic_set(&qmp->orphan, 1);
>  	mbox_free_channel(qmp->mbox_chan);
> +	kref_put(&qmp->refcount, qmp_handle_release);
>  
>  	return 0;
>  }
> diff --git a/include/linux/soc/qcom/qcom_aoss.h b/include/linux/soc/qcom/qcom_aoss.h
> new file mode 100644
> index 0000000..27d00f7
> --- /dev/null
> +++ b/include/linux/soc/qcom/qcom_aoss.h
> @@ -0,0 +1,33 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef __QCOM_AOSS_H__
> +#define __QCOM_AOSS_H__
> +
> +#include <linux/err.h>
> +#include <linux/device.h>
> +
> +struct qmp;
> +
> +#if IS_ENABLED(CONFIG_QCOM_AOSS_QMP)
> +
> +int qmp_send(struct qmp *qmp, const void *data, size_t len);
> +struct qmp *qmp_get(struct device *dev);
> +
> +#else
> +
> +static inline int qmp_send(struct qmp *qmp, const void *data, size_t len)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline struct qmp *qmp_get(struct device *dev)
> +{
> +	return ERR_PTR(-ENODEV);
> +}
> +
> +#endif
> +
> +#endif
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH V3 1/2] soc: qcom: aoss: Expose send for generic usecase
  2021-05-06 17:06 ` [PATCH V3 1/2] " Deepak Kumar Singh
  2021-05-28  3:32   ` Bjorn Andersson
@ 2021-06-07 11:42   ` Sibi Sankar
  1 sibling, 0 replies; 15+ messages in thread
From: Sibi Sankar @ 2021-06-07 11:42 UTC (permalink / raw)
  To: Deepak Kumar Singh
  Cc: bjorn.andersson, clew, manivannan.sadhasivam, linux-kernel,
	linux-arm-msm, linux-remoteproc, Andy Gross,
	deesin=codeaurora.org

Hey Deepak,

Thanks for the patch!

On 2021-05-06 22:36, Deepak Kumar Singh wrote:
> Not all upcoming usecases will have an interface to allow the aoss
> driver to hook onto. Expose the send api and create a get function to
> enable drivers to send their own messages to aoss.
> 
> Signed-off-by: Chris Lew <clew@codeaurora.org>
> Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
> ---
>  drivers/soc/qcom/qcom_aoss.c       | 70 
> ++++++++++++++++++++++++++++++++++++--
>  include/linux/soc/qcom/qcom_aoss.h | 33 ++++++++++++++++++
>  2 files changed, 101 insertions(+), 2 deletions(-)
>  create mode 100644 include/linux/soc/qcom/qcom_aoss.h
> 
> diff --git a/drivers/soc/qcom/qcom_aoss.c 
> b/drivers/soc/qcom/qcom_aoss.c
> index 53acb94..cd75d4d 100644
> --- a/drivers/soc/qcom/qcom_aoss.c
> +++ b/drivers/soc/qcom/qcom_aoss.c
> @@ -8,10 +8,12 @@
>  #include <linux/io.h>
>  #include <linux/mailbox_client.h>
>  #include <linux/module.h>
> +#include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_domain.h>
>  #include <linux/thermal.h>
>  #include <linux/slab.h>
> +#include <linux/soc/qcom/qcom_aoss.h>
> 
>  #define QMP_DESC_MAGIC			0x0
>  #define QMP_DESC_VERSION		0x4
> @@ -61,6 +63,7 @@ struct qmp_cooling_device {
>   * @mbox_chan: mailbox channel used to ring the doorbell on transmit
>   * @offset: offset within @msgram where messages should be written
>   * @size: maximum size of the messages to be transmitted
> + * @orphan: tarcks whether qmp handle is valid
>   * @event: wait_queue for synchronization with the IRQ
>   * @tx_lock: provides synchronization between multiple callers of 
> qmp_send()
>   * @qdss_clk: QDSS clock hw struct
> @@ -76,6 +79,8 @@ struct qmp {
> 
>  	size_t offset;
>  	size_t size;
> +	atomic_t  orphan;
> +	struct kref refcount;
> 
>  	wait_queue_head_t event;
> 
> @@ -223,11 +228,17 @@ static bool qmp_message_empty(struct qmp *qmp)
>   *
>   * Return: 0 on success, negative errno on failure
>   */
> -static int qmp_send(struct qmp *qmp, const void *data, size_t len)
> +int qmp_send(struct qmp *qmp, const void *data, size_t len)
>  {
>  	long time_left;
>  	int ret;
> 
> +	if (WARN_ON(IS_ERR_OR_NULL(qmp) || !data))
> +		return -EINVAL;
> +
> +	if (atomic_read(&qmp->orphan))
> +		return -EINVAL;
> +
>  	if (WARN_ON(len + sizeof(u32) > qmp->size))
>  		return -EINVAL;
> 
> @@ -261,6 +272,7 @@ static int qmp_send(struct qmp *qmp, const void
> *data, size_t len)
> 
>  	return ret;
>  }
> +EXPORT_SYMBOL(qmp_send);
> 
>  static int qmp_qdss_clk_prepare(struct clk_hw *hw)
>  {
> @@ -515,6 +527,54 @@ static void qmp_cooling_devices_remove(struct qmp 
> *qmp)
>  		thermal_cooling_device_unregister(qmp->cooling_devs[i].cdev);
>  }
> 
> +/**
> + * qmp_get() - get a qmp handle from a device
> + * @dev: client device pointer
> + *
> + * Return: handle to qmp device on success, ERR_PTR() on failure
> + */
> +struct qmp *qmp_get(struct device *dev)
> +{
> +	struct platform_device *pdev;
> +	struct device_node *np;
> +	struct qmp *qmp;
> +
> +	if (!dev || !dev->of_node)
> +		return ERR_PTR(-EINVAL);
> +
> +	np = of_parse_phandle(dev->of_node, "qcom,qmp", 0);
> +	if (!np)
> +		return ERR_PTR(-ENODEV);
> +
> +	pdev = of_find_device_by_node(np);
> +	of_node_put(np);
> +	if (!pdev)
> +		return ERR_PTR(-EINVAL);
> +
> +	qmp = platform_get_drvdata(pdev);
> +	platform_device_put(pdev);
> +
> +	if (qmp)
> +		kref_get(&qmp->refcount);
> +
> +	return qmp ? qmp : ERR_PTR(-EPROBE_DEFER);
> +}
> +EXPORT_SYMBOL(qmp_get);
> +
> +static void qmp_handle_release(struct kref *ref)
> +{
> +	struct qmp *qmp = container_of(ref, struct qmp, refcount);
> +
> +	kfree(qmp);
> +}
> +
> +void qmp_put(struct qmp *qmp)
> +{
> +	if (!IS_ERR_OR_NULL(qmp))
> +		kref_put(&qmp->refcount, qmp_handle_release);
> +}
> +EXPORT_SYMBOL(qmp_put);
> +
>  static int qmp_probe(struct platform_device *pdev)
>  {
>  	struct resource *res;
> @@ -522,13 +582,14 @@ static int qmp_probe(struct platform_device 
> *pdev)
>  	int irq;
>  	int ret;
> 
> -	qmp = devm_kzalloc(&pdev->dev, sizeof(*qmp), GFP_KERNEL);
> +	qmp = kzalloc(sizeof(*qmp), GFP_KERNEL);
>  	if (!qmp)
>  		return -ENOMEM;
> 
>  	qmp->dev = &pdev->dev;
>  	init_waitqueue_head(&qmp->event);
>  	mutex_init(&qmp->tx_lock);
> +	kref_init(&qmp->refcount);
> 
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	qmp->msgram = devm_ioremap_resource(&pdev->dev, res);
> @@ -569,6 +630,8 @@ static int qmp_probe(struct platform_device *pdev)
> 
>  	platform_set_drvdata(pdev, qmp);
> 
> +	atomic_set(&qmp->orphan, 0);
> +
>  	return 0;
> 
>  err_remove_qdss_clk:
> @@ -577,6 +640,7 @@ static int qmp_probe(struct platform_device *pdev)
>  	qmp_close(qmp);
>  err_free_mbox:
>  	mbox_free_channel(qmp->mbox_chan);
> +	kfree(qmp);
> 
>  	return ret;
>  }
> @@ -590,7 +654,9 @@ static int qmp_remove(struct platform_device *pdev)
>  	qmp_cooling_devices_remove(qmp);
> 
>  	qmp_close(qmp);
> +	atomic_set(&qmp->orphan, 1);
>  	mbox_free_channel(qmp->mbox_chan);
> +	kref_put(&qmp->refcount, qmp_handle_release);
> 
>  	return 0;
>  }
> diff --git a/include/linux/soc/qcom/qcom_aoss.h
> b/include/linux/soc/qcom/qcom_aoss.h
> new file mode 100644
> index 0000000..27d00f7
> --- /dev/null
> +++ b/include/linux/soc/qcom/qcom_aoss.h
> @@ -0,0 +1,33 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef __QCOM_AOSS_H__
> +#define __QCOM_AOSS_H__
> +
> +#include <linux/err.h>
> +#include <linux/device.h>
> +
> +struct qmp;
> +
> +#if IS_ENABLED(CONFIG_QCOM_AOSS_QMP)
> +
> +int qmp_send(struct qmp *qmp, const void *data, size_t len);
> +struct qmp *qmp_get(struct device *dev);

missed adding qmp_put.

> +
> +#else
> +
> +static inline int qmp_send(struct qmp *qmp, const void *data, size_t 
> len)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline struct qmp *qmp_get(struct device *dev)
> +{
> +	return ERR_PTR(-ENODEV);
> +}


missed adding qmp_put.

> +
> +#endif
> +
> +#endif

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2021-06-07 11:43 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-26 14:46 [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Deepak Kumar Singh
2020-06-26 14:46 ` [PATCH V6 1/4] rpmsg: core: Add signal API support Deepak Kumar Singh
2021-05-06 17:18   ` Deepak Kumar Singh
2020-06-26 14:46 ` [PATCH V6 2/4] rpmsg: glink: Add support to handle signals command Deepak Kumar Singh
2021-05-06 17:17   ` Deepak Kumar Singh
2020-06-26 14:46 ` [PATCH V6 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support Deepak Kumar Singh
2020-06-26 14:46 ` [PATCH V6 4/4] rpmsg: char: Add signal callback and POLLPRI support Deepak Kumar Singh
2020-07-06 18:04 ` [PATCH V5 0/4] Signaling api support in glink/rpmsg clients Mathieu Poirier
2020-09-02 16:30   ` Deepak Kumar Singh
2020-09-02 16:40     ` Mathieu Poirier
2021-05-06 17:06 [PATCH V3 0/2] soc: qcom: aoss: Expose send for generic usecase Deepak Kumar Singh
2021-05-06 17:06 ` [PATCH V3 1/2] " Deepak Kumar Singh
2021-05-28  3:32   ` Bjorn Andersson
2021-06-07 11:42   ` Sibi Sankar
2021-05-06 17:06 ` [PATCH V3 2/2] soc: qcom: aoss: Add debugfs entry Deepak Kumar Singh

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).