[PATCH v6 0/5] Add GCC and RPMh clock support for SDX65

[PATCH v6 0/5] Add GCC and RPMh clock support for SDX65

[quic_vamslank]

From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>

Hello,
Changes from v5:
 - Collected Vinod Koul's and Rob's Reviewed-by for the patches
 - Rebased on the latest tip of Torvald's tree (MAINTAINERS: co-maintain random.c)

Changes from v4:
 - Fixed comments from vinod koul on Clock Alpha PLL and GCC driver support patches
 - Addressed Rob's comments related to GCC dt-binding patch
 - Collected Vinod Koul's Reviewed-by for the dt-bindings patches

Changes from v3:
 - Fixed DTbindings and unused variables errors reported by kernel test bot
 - Rebased on top of v5.16-rc1

Changes from v2:
 - Addressed Taniya Das and Vinod Koul's comments related to adding LUCID_EVO
   PLL type and rpmh support patches
 - Collected Rob's Acked-by for the dt-bindings patches

Changes from v1:
 - Addressed Bjorn's comments related to the GCC support patch
 - Collected Bjorn's and Rob's Reviewed-by for the dt-bindings patches

This patch series adds bindings and device driver changes for GCC, pdc and RPMh
clock support for SDX65 Platform.

Thanks,
Vamsi

Vamsi Krishna Lanka (2):
  clk: qcom: Add LUCID_EVO PLL type for SDX65
  clk: qcom: Add SDX65 GCC support

Vamsi krishna Lanka (3):
  dt-bindings: clock: Add SDX65 GCC clock bindings
  dt-bindings: clock: Introduce RPMHCC bindings for SDX65
  clk: qcom: Add support for SDX65 RPMh clocks

 .../bindings/clock/qcom,gcc-sdx65.yaml        |   80 +
 .../bindings/clock/qcom,rpmhcc.yaml           |    1 +
 drivers/clk/qcom/Kconfig                      |    8 +
 drivers/clk/qcom/Makefile                     |    1 +
 drivers/clk/qcom/clk-alpha-pll.c              |  204 ++-
 drivers/clk/qcom/clk-alpha-pll.h              |    3 +
 drivers/clk/qcom/clk-rpmh.c                   |   25 +
 drivers/clk/qcom/gcc-sdx65.c                  | 1603 +++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sdx65.h    |  122 ++
 9 files changed, 2021 insertions(+), 26 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
 create mode 100644 drivers/clk/qcom/gcc-sdx65.c
 create mode 100644 include/dt-bindings/clock/qcom,gcc-sdx65.h


base-commit: 58e1100fdc5990b0cc0d4beaf2562a92e621ac7d
-- 
2.33.1

[PATCH v6 1/5] dt-bindings: clock: Add SDX65 GCC clock bindings

[quic_vamslank]

From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>

Add device tree bindings for global clock controller on SDX65 SOCs.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
 .../bindings/clock/qcom,gcc-sdx65.yaml        |  80 ++++++++++++
 include/dt-bindings/clock/qcom,gcc-sdx65.h    | 122 ++++++++++++++++++
 2 files changed, 202 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
 create mode 100644 include/dt-bindings/clock/qcom,gcc-sdx65.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
new file mode 100644
index 000000000000..16c4cdc7b4d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx65.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SDX65
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SDX65
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sdx65.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sdx65
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+      - description: PCIE Pipe clock source
+      - description: USB3 phy wrapper pipe clock source
+      - description: PLL test clock source (Optional clock)
+    minItems: 5
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+      - const: pcie_pipe_clk
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
+      - const: core_bi_pll_test_se # Optional clock
+    minItems: 5
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdx65";
+      reg = <0x100000 0x1f7400>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
+               <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>, <&pll_test_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
+                    "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk", "core_bi_pll_test_se";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/include/dt-bindings/clock/qcom,gcc-sdx65.h b/include/dt-bindings/clock/qcom,gcc-sdx65.h
new file mode 100644
index 000000000000..75ecc9237d8f
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gcc-sdx65.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SDX65_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_SDX65_H
+
+/* GCC clocks */
+#define GPLL0							0
+#define GPLL0_OUT_EVEN						1
+#define GCC_AHB_PCIE_LINK_CLK					2
+#define GCC_BLSP1_AHB_CLK					3
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK				4
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK_SRC				5
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK				6
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK_SRC				7
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK				8
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK_SRC				9
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK				10
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK_SRC				11
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK				12
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK_SRC				13
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK				14
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK_SRC				15
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK				16
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK_SRC				17
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK				18
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK_SRC				19
+#define GCC_BLSP1_SLEEP_CLK					20
+#define GCC_BLSP1_UART1_APPS_CLK				21
+#define GCC_BLSP1_UART1_APPS_CLK_SRC				22
+#define GCC_BLSP1_UART2_APPS_CLK				23
+#define GCC_BLSP1_UART2_APPS_CLK_SRC				24
+#define GCC_BLSP1_UART3_APPS_CLK				25
+#define GCC_BLSP1_UART3_APPS_CLK_SRC				26
+#define GCC_BLSP1_UART4_APPS_CLK				27
+#define GCC_BLSP1_UART4_APPS_CLK_SRC				28
+#define GCC_BOOT_ROM_AHB_CLK					29
+#define GCC_CPUSS_AHB_CLK					30
+#define GCC_CPUSS_AHB_CLK_SRC					31
+#define GCC_CPUSS_AHB_POSTDIV_CLK_SRC				32
+#define GCC_CPUSS_GNOC_CLK					33
+#define GCC_GP1_CLK						34
+#define GCC_GP1_CLK_SRC						35
+#define GCC_GP2_CLK						36
+#define GCC_GP2_CLK_SRC						37
+#define GCC_GP3_CLK						38
+#define GCC_GP3_CLK_SRC						39
+#define GCC_PCIE_0_CLKREF_EN					40
+#define GCC_PCIE_AUX_CLK					41
+#define GCC_PCIE_AUX_CLK_SRC					42
+#define GCC_PCIE_AUX_PHY_CLK_SRC				43
+#define GCC_PCIE_CFG_AHB_CLK					44
+#define GCC_PCIE_MSTR_AXI_CLK					45
+#define GCC_PCIE_PIPE_CLK					46
+#define GCC_PCIE_PIPE_CLK_SRC					47
+#define GCC_PCIE_RCHNG_PHY_CLK					48
+#define GCC_PCIE_RCHNG_PHY_CLK_SRC				49
+#define GCC_PCIE_SLEEP_CLK					50
+#define GCC_PCIE_SLV_AXI_CLK					51
+#define GCC_PCIE_SLV_Q2A_AXI_CLK				52
+#define GCC_PDM2_CLK						53
+#define GCC_PDM2_CLK_SRC					54
+#define GCC_PDM_AHB_CLK						55
+#define GCC_PDM_XO4_CLK						56
+#define GCC_RX1_USB2_CLKREF_EN					57
+#define GCC_SDCC1_AHB_CLK					58
+#define GCC_SDCC1_APPS_CLK					59
+#define GCC_SDCC1_APPS_CLK_SRC					60
+#define GCC_SPMI_FETCHER_AHB_CLK				61
+#define GCC_SPMI_FETCHER_CLK					62
+#define GCC_SPMI_FETCHER_CLK_SRC				63
+#define GCC_SYS_NOC_CPUSS_AHB_CLK				64
+#define GCC_USB30_MASTER_CLK					65
+#define GCC_USB30_MASTER_CLK_SRC				66
+#define GCC_USB30_MOCK_UTMI_CLK					67
+#define GCC_USB30_MOCK_UTMI_CLK_SRC				68
+#define GCC_USB30_MOCK_UTMI_POSTDIV_CLK_SRC			69
+#define GCC_USB30_MSTR_AXI_CLK					70
+#define GCC_USB30_SLEEP_CLK					71
+#define GCC_USB30_SLV_AHB_CLK					72
+#define GCC_USB3_PHY_AUX_CLK					73
+#define GCC_USB3_PHY_AUX_CLK_SRC				74
+#define GCC_USB3_PHY_PIPE_CLK					75
+#define GCC_USB3_PHY_PIPE_CLK_SRC				76
+#define GCC_USB3_PRIM_CLKREF_EN					77
+#define GCC_USB_PHY_CFG_AHB2PHY_CLK				78
+#define GCC_XO_DIV4_CLK						79
+#define GCC_XO_PCIE_LINK_CLK					80
+
+/* GCC resets */
+#define GCC_BLSP1_QUP1_BCR					0
+#define GCC_BLSP1_QUP2_BCR					1
+#define GCC_BLSP1_QUP3_BCR					2
+#define GCC_BLSP1_QUP4_BCR					3
+#define GCC_BLSP1_UART1_BCR					4
+#define GCC_BLSP1_UART2_BCR					5
+#define GCC_BLSP1_UART3_BCR					6
+#define GCC_BLSP1_UART4_BCR					7
+#define GCC_PCIE_BCR						8
+#define GCC_PCIE_LINK_DOWN_BCR					9
+#define GCC_PCIE_NOCSR_COM_PHY_BCR				10
+#define GCC_PCIE_PHY_BCR					11
+#define GCC_PCIE_PHY_CFG_AHB_BCR				12
+#define GCC_PCIE_PHY_COM_BCR					13
+#define GCC_PCIE_PHY_NOCSR_COM_PHY_BCR				14
+#define GCC_PDM_BCR						15
+#define GCC_QUSB2PHY_BCR					16
+#define GCC_SDCC1_BCR						17
+#define GCC_SPMI_FETCHER_BCR					18
+#define GCC_TCSR_PCIE_BCR					19
+#define GCC_USB30_BCR						20
+#define GCC_USB3_PHY_BCR					21
+#define GCC_USB3PHY_PHY_BCR					22
+#define GCC_USB_PHY_CFG_AHB2PHY_BCR				23
+
+/* GCC power domains */
+#define USB30_GDSC                                              0
+#define PCIE_GDSC                                               1
+
+#endif
-- 
2.33.1

[PATCH v6 2/5] clk: qcom: Add LUCID_EVO PLL type for SDX65

[quic_vamslank]

From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>

Add a LUCID_EVO PLL type for SDX65 SoC from Qualcomm.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 204 +++++++++++++++++++++++++++----
 drivers/clk/qcom/clk-alpha-pll.h |   3 +
 2 files changed, 181 insertions(+), 26 deletions(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index eaedcceb766f..e0c67b76d8ac 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/kernel.h>
@@ -139,6 +140,20 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_OPMODE] = 0x28,
 		[PLL_OFF_STATUS] = 0x38,
 	},
+	[CLK_ALPHA_PLL_TYPE_LUCID_EVO] = {
+		[PLL_OFF_OPMODE] = 0x04,
+		[PLL_OFF_STATUS] = 0x0c,
+		[PLL_OFF_L_VAL] = 0x10,
+		[PLL_OFF_ALPHA_VAL] = 0x14,
+		[PLL_OFF_USER_CTL] = 0x18,
+		[PLL_OFF_USER_CTL_U] = 0x1c,
+		[PLL_OFF_CONFIG_CTL] = 0x20,
+		[PLL_OFF_CONFIG_CTL_U] = 0x24,
+		[PLL_OFF_CONFIG_CTL_U1] = 0x28,
+		[PLL_OFF_TEST_CTL] = 0x2c,
+		[PLL_OFF_TEST_CTL_U] = 0x30,
+		[PLL_OFF_TEST_CTL_U1] = 0x34,
+        },
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 
@@ -175,6 +190,10 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 #define LUCID_5LPE_PLL_LATCH_INPUT	BIT(14)
 #define LUCID_5LPE_ENABLE_VOTE_RUN	BIT(21)
 
+/* LUCID EVO PLL specific settings and offsets */
+#define LUCID_EVO_ENABLE_VOTE_RUN       BIT(25)
+#define LUCID_EVO_PLL_L_VAL_MASK        GENMASK(15, 0)
+
 /* ZONDA PLL specific */
 #define ZONDA_PLL_OUT_MASK	0xf
 #define ZONDA_STAY_IN_CFA	BIT(16)
@@ -1741,35 +1760,47 @@ static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
 					  LUCID_5LPE_ALPHA_PLL_ACK_LATCH);
 }
 
+static int __clk_lucid_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
+                                            unsigned long parent_rate, unsigned long enable_vote_run)
+{
+        struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+	struct regmap *regmap = pll->clkr.regmap;
+        int i, val = 0, div, ret;
+        u32 mask;
+
+        /*
+         * If the PLL is in FSM mode, then treat set_rate callback as a
+         * no-operation.
+         */
+        ret = regmap_read(regmap, PLL_USER_CTL(pll), &val);
+        if (ret)
+                return ret;
+
+        if (val & enable_vote_run)
+                return 0;
+
+        if (!pll->post_div_table) {
+                pr_err("Missing the post_div_table for the PLL\n");
+                return -EINVAL;
+        }
+
+        div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
+        for (i = 0; i < pll->num_post_div; i++) {
+                if (pll->post_div_table[i].div == div) {
+                        val = pll->post_div_table[i].val;
+                        break;
+                }
+        }
+
+        mask = GENMASK(pll->width + pll->post_div_shift - 1, pll->post_div_shift);
+        return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
+                                  mask, val << pll->post_div_shift);
+}
+
 static int clk_lucid_5lpe_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
 					       unsigned long parent_rate)
 {
-	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
-	int i, val = 0, div, ret;
-	u32 mask;
-
-	/*
-	 * If the PLL is in FSM mode, then treat set_rate callback as a
-	 * no-operation.
-	 */
-	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
-	if (ret)
-		return ret;
-
-	if (val & LUCID_5LPE_ENABLE_VOTE_RUN)
-		return 0;
-
-	div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
-	for (i = 0; i < pll->num_post_div; i++) {
-		if (pll->post_div_table[i].div == div) {
-			val = pll->post_div_table[i].val;
-			break;
-		}
-	}
-
-	mask = GENMASK(pll->width + pll->post_div_shift - 1, pll->post_div_shift);
-	return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
-				  mask, val << pll->post_div_shift);
+	return __clk_lucid_pll_postdiv_set_rate(hw, rate, parent_rate, LUCID_5LPE_ENABLE_VOTE_RUN);
 }
 
 const struct clk_ops clk_alpha_pll_lucid_5lpe_ops = {
@@ -1951,3 +1982,124 @@ const struct clk_ops clk_alpha_pll_zonda_ops = {
 	.set_rate = clk_zonda_pll_set_rate,
 };
 EXPORT_SYMBOL(clk_alpha_pll_zonda_ops);
+
+static int alpha_pll_lucid_evo_enable(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	struct regmap *regmap = pll->clkr.regmap;
+	u32 val;
+	int ret;
+
+	ret = regmap_read(regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return ret;
+
+	/* If in FSM mode, just vote for it */
+	if (val & LUCID_EVO_ENABLE_VOTE_RUN) {
+		ret = clk_enable_regmap(hw);
+		if (ret)
+			return ret;
+		return wait_for_pll_enable_lock(pll);
+	}
+
+	/* Check if PLL is already enabled */
+	ret = trion_pll_is_enabled(pll, regmap);
+	if (ret < 0)
+		return ret;
+	else if (ret) {
+		pr_warn("%s PLL is already enabled\n", clk_hw_get_name(&pll->clkr.hw));
+		return 0;
+	}
+
+	ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+	if (ret)
+		return ret;
+
+	/* Set operation mode to RUN */
+	regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
+
+	ret = wait_for_pll_enable_lock(pll);
+	if (ret)
+		return ret;
+
+	/* Enable the PLL outputs */
+	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
+	if (ret)
+		return ret;
+
+	/* Enable the global PLL outputs */
+	ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
+	if (ret)
+		return ret;
+
+	/* Ensure that the write above goes through before returning. */
+	mb();
+	return ret;
+}
+
+static void alpha_pll_lucid_evo_disable(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	struct regmap *regmap = pll->clkr.regmap;
+	u32 val;
+	int ret;
+
+	ret = regmap_read(regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return;
+
+	/* If in FSM mode, just unvote it */
+	if (val & LUCID_EVO_ENABLE_VOTE_RUN) {
+		clk_disable_regmap(hw);
+		return;
+	}
+
+	/* Disable the global PLL output */
+	ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
+	if (ret)
+		return;
+
+	/* Disable the PLL outputs */
+	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
+	if (ret)
+		return;
+
+	/* Place the PLL mode in STANDBY */
+	regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
+}
+
+static unsigned long alpha_pll_lucid_evo_recalc_rate(struct clk_hw *hw,
+						     unsigned long parent_rate)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	struct regmap *regmap = pll->clkr.regmap;
+	u32 l, frac;
+
+	regmap_read(regmap, PLL_L_VAL(pll), &l);
+	l &= LUCID_EVO_PLL_L_VAL_MASK;
+	regmap_read(regmap, PLL_ALPHA_VAL(pll), &frac);
+
+	return alpha_pll_calc_rate(parent_rate, l, frac, pll_alpha_width(pll));
+}
+
+static int clk_lucid_evo_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
+					      unsigned long parent_rate)
+{
+	return __clk_lucid_pll_postdiv_set_rate(hw, rate, parent_rate, LUCID_EVO_ENABLE_VOTE_RUN);
+}
+
+const struct clk_ops clk_alpha_pll_fixed_lucid_evo_ops = {
+	.enable = alpha_pll_lucid_evo_enable,
+	.disable = alpha_pll_lucid_evo_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = alpha_pll_lucid_evo_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_lucid_evo_ops);
+
+const struct clk_ops clk_alpha_pll_postdiv_lucid_evo_ops = {
+	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
+	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
+	.set_rate = clk_lucid_evo_pll_postdiv_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_evo_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 55e4fa47912f..6e9907deaf30 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -17,6 +17,7 @@ enum {
 	CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION,
 	CLK_ALPHA_PLL_TYPE_AGERA,
 	CLK_ALPHA_PLL_TYPE_ZONDA,
+	CLK_ALPHA_PLL_TYPE_LUCID_EVO,
 	CLK_ALPHA_PLL_TYPE_MAX,
 };
 
@@ -151,6 +152,8 @@ extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
 
 extern const struct clk_ops clk_alpha_pll_zonda_ops;
 #define clk_alpha_pll_postdiv_zonda_ops clk_alpha_pll_postdiv_fabia_ops
+extern const struct clk_ops clk_alpha_pll_fixed_lucid_evo_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_lucid_evo_ops;
 
 void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
-- 
2.33.1

[PATCH v6 3/5] clk: qcom: Add SDX65 GCC support

[quic_vamslank]

From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>

Add Global Clock Controller (GCC) support for SDX65 SoCs from Qualcomm.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/clk/qcom/Kconfig     |    8 +
 drivers/clk/qcom/Makefile    |    1 +
 drivers/clk/qcom/gcc-sdx65.c | 1603 ++++++++++++++++++++++++++++++++++
 3 files changed, 1612 insertions(+)
 create mode 100644 drivers/clk/qcom/gcc-sdx65.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 74efc82127e1..6cd0634cea41 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -564,6 +564,14 @@ config SM_CAMCC_8250
 	  Support for the camera clock controller on SM8250 devices.
 	  Say Y if you want to support camera devices and camera functionality.
 
+config SDX_GCC_65
+	tristate "SDX65 Global Clock Controller"
+	select QCOM_GDSC
+	help
+	  Support for the global clock controller on SDX65 devices.
+	  Say Y if you want to use peripheral devices such as UART,
+	  SPI, I2C, USB, SD/UFS, PCIe etc.
+
 config SM_DISPCC_8250
 	tristate "SM8150 and SM8250 Display Clock Controller"
 	depends on SM_GCC_8150 || SM_GCC_8250
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 1718c34d3551..3d855c14cc23 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -83,6 +83,7 @@ obj-$(CONFIG_SDM_LPASSCC_845) += lpasscc-sdm845.o
 obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
 obj-$(CONFIG_SDX_GCC_55) += gcc-sdx55.o
 obj-$(CONFIG_SM_CAMCC_8250) += camcc-sm8250.o
+obj-$(CONFIG_SDX_GCC_65) += gcc-sdx65.o
 obj-$(CONFIG_SM_DISPCC_8250) += dispcc-sm8250.o
 obj-$(CONFIG_SM_GCC_6115) += gcc-sm6115.o
 obj-$(CONFIG_SM_GCC_6125) += gcc-sm6125.o
diff --git a/drivers/clk/qcom/gcc-sdx65.c b/drivers/clk/qcom/gcc-sdx65.c
new file mode 100644
index 000000000000..7d28b1afffd4
--- /dev/null
+++ b/drivers/clk/qcom/gcc-sdx65.c
@@ -0,0 +1,1603 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gcc-sdx65.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+	P_BI_TCXO,
+	P_GPLL0_OUT_EVEN,
+	P_GPLL0_OUT_MAIN,
+	P_PCIE_PIPE_CLK,
+	P_SLEEP_CLK,
+	P_USB3_PHY_WRAPPER_GCC_USB30_PIPE_CLK,
+};
+
+static struct clk_alpha_pll gpll0 = {
+	.offset = 0x0,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_EVO],
+	.clkr = {
+		.enable_reg = 0x6d000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpll0",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fixed_lucid_evo_ops,
+		},
+	},
+};
+
+static const struct clk_div_table post_div_table_gpll0_out_even[] = {
+	{ 0x1, 2 },
+	{ }
+};
+
+static struct clk_alpha_pll_postdiv gpll0_out_even = {
+	.offset = 0x0,
+	.post_div_shift = 10,
+	.post_div_table = post_div_table_gpll0_out_even,
+	.num_post_div = ARRAY_SIZE(post_div_table_gpll0_out_even),
+	.width = 4,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_EVO],
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpll0_out_even",
+		.parent_hws = (const struct clk_hw *[]){ &gpll0.clkr.hw },
+		.num_parents = 1,
+		.ops = &clk_alpha_pll_postdiv_lucid_evo_ops,
+	},
+};
+
+static const struct parent_map gcc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_0[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct clk_parent_data gcc_parent_data_0_ao[] = {
+	{ .fw_name = "bi_tcxo_ao" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_2[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_SLEEP_CLK, 5 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_2[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .fw_name = "sleep_clk" },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_3[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_SLEEP_CLK, 5 },
+};
+
+static const struct clk_parent_data gcc_parent_data_3[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .fw_name = "sleep_clk" },
+};
+
+static const struct parent_map gcc_parent_map_4[] = {
+	{ P_BI_TCXO, 2 },
+};
+
+static const struct parent_map gcc_parent_map_5[] = {
+	{ P_PCIE_PIPE_CLK, 0 },
+	{ P_BI_TCXO, 2 },
+};
+
+static const struct clk_parent_data gcc_parent_data_5[] = {
+	{ .fw_name = "pcie_pipe_clk"},
+	{ .fw_name = "bi_tcxo"},
+};
+
+static const struct parent_map gcc_parent_map_6[] = {
+	{ P_USB3_PHY_WRAPPER_GCC_USB30_PIPE_CLK, 0 },
+	{ P_BI_TCXO, 2 },
+};
+
+static const struct clk_parent_data gcc_parent_data_6[] = {
+	{ .fw_name = "usb3_phy_wrapper_gcc_usb30_pipe_clk"},
+	{ .fw_name = "bi_tcxo"},
+};
+
+static struct clk_regmap_mux gcc_pcie_aux_clk_src = {
+	.reg = 0x43060,
+	.shift = 0,
+	.width = 2,
+	.parent_map = gcc_parent_map_4,
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_aux_clk_src",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_mux_closest_ops,
+		},
+	},
+};
+
+static struct clk_regmap_mux gcc_pcie_pipe_clk_src = {
+	.reg = 0x43044,
+	.shift = 0,
+	.width = 2,
+	.parent_map = gcc_parent_map_5,
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_pipe_clk_src",
+			.parent_data = gcc_parent_data_5,
+			.num_parents = 2,
+			.ops = &clk_regmap_mux_closest_ops,
+		},
+	},
+};
+
+static struct clk_regmap_mux gcc_usb3_phy_pipe_clk_src = {
+	.reg = 0x1706c,
+	.shift = 0,
+	.width = 2,
+	.parent_map = gcc_parent_map_6,
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_phy_pipe_clk_src",
+			.parent_data = gcc_parent_data_6,
+			.num_parents = 2,
+			.ops = &clk_regmap_mux_closest_ops,
+		},
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_blsp1_qup1_i2c_apps_clk_src[] = {
+	F(9600000, P_BI_TCXO, 2, 0, 0),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_blsp1_qup1_i2c_apps_clk_src = {
+	.cmd_rcgr = 0x1c024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_qup1_i2c_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_qup1_i2c_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_blsp1_qup1_spi_apps_clk_src[] = {
+	F(960000, P_BI_TCXO, 10, 1, 2),
+	F(4800000, P_BI_TCXO, 4, 0, 0),
+	F(9600000, P_BI_TCXO, 2, 0, 0),
+	F(15000000, P_GPLL0_OUT_EVEN, 5, 1, 4),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(24000000, P_GPLL0_OUT_MAIN, 12.5, 1, 2),
+	F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2),
+	F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_blsp1_qup1_spi_apps_clk_src = {
+	.cmd_rcgr = 0x1c00c,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_qup1_spi_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_qup1_spi_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_blsp1_qup2_i2c_apps_clk_src = {
+	.cmd_rcgr = 0x1e024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_qup1_i2c_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_qup2_i2c_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_blsp1_qup2_spi_apps_clk_src = {
+	.cmd_rcgr = 0x1e00c,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_qup1_spi_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_qup2_spi_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_blsp1_qup3_i2c_apps_clk_src = {
+	.cmd_rcgr = 0x20024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_qup1_i2c_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_qup3_i2c_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_blsp1_qup3_spi_apps_clk_src = {
+	.cmd_rcgr = 0x2000c,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_qup1_spi_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_qup3_spi_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_blsp1_qup4_i2c_apps_clk_src = {
+	.cmd_rcgr = 0x22024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_qup1_i2c_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_qup4_i2c_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_blsp1_qup4_spi_apps_clk_src = {
+	.cmd_rcgr = 0x2200c,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_qup1_spi_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_qup4_spi_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_blsp1_uart1_apps_clk_src[] = {
+	F(3686400, P_GPLL0_OUT_EVEN, 1, 192, 15625),
+	F(7372800, P_GPLL0_OUT_EVEN, 1, 384, 15625),
+	F(9600000, P_BI_TCXO, 2, 0, 0),
+	F(14745600, P_GPLL0_OUT_EVEN, 1, 768, 15625),
+	F(16000000, P_GPLL0_OUT_EVEN, 1, 4, 75),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(19354839, P_GPLL0_OUT_MAIN, 15.5, 1, 2),
+	F(20000000, P_GPLL0_OUT_MAIN, 15, 1, 2),
+	F(20689655, P_GPLL0_OUT_MAIN, 14.5, 1, 2),
+	F(21428571, P_GPLL0_OUT_MAIN, 14, 1, 2),
+	F(22222222, P_GPLL0_OUT_MAIN, 13.5, 1, 2),
+	F(23076923, P_GPLL0_OUT_MAIN, 13, 1, 2),
+	F(24000000, P_GPLL0_OUT_MAIN, 5, 1, 5),
+	F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2),
+	F(26086957, P_GPLL0_OUT_MAIN, 11.5, 1, 2),
+	F(27272727, P_GPLL0_OUT_MAIN, 11, 1, 2),
+	F(28571429, P_GPLL0_OUT_MAIN, 10.5, 1, 2),
+	F(32000000, P_GPLL0_OUT_MAIN, 1, 4, 75),
+	F(40000000, P_GPLL0_OUT_MAIN, 15, 0, 0),
+	F(46400000, P_GPLL0_OUT_MAIN, 1, 29, 375),
+	F(48000000, P_GPLL0_OUT_MAIN, 12.5, 0, 0),
+	F(51200000, P_GPLL0_OUT_MAIN, 1, 32, 375),
+	F(56000000, P_GPLL0_OUT_MAIN, 1, 7, 75),
+	F(58982400, P_GPLL0_OUT_MAIN, 1, 1536, 15625),
+	F(60000000, P_GPLL0_OUT_MAIN, 10, 0, 0),
+	F(63157895, P_GPLL0_OUT_MAIN, 9.5, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_blsp1_uart1_apps_clk_src = {
+	.cmd_rcgr = 0x1d00c,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_uart1_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_uart1_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_blsp1_uart2_apps_clk_src = {
+	.cmd_rcgr = 0x1f00c,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_uart1_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_uart2_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_blsp1_uart3_apps_clk_src = {
+	.cmd_rcgr = 0x2100c,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_uart1_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_uart3_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_blsp1_uart4_apps_clk_src = {
+	.cmd_rcgr = 0x2300c,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_blsp1_uart1_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_blsp1_uart4_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_cpuss_ahb_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(133333333, P_GPLL0_OUT_MAIN, 4.5, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_cpuss_ahb_clk_src = {
+	.cmd_rcgr = 0x3000c,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_cpuss_ahb_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_cpuss_ahb_clk_src",
+		.parent_data = gcc_parent_data_0_ao,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_gp1_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_gp1_clk_src = {
+	.cmd_rcgr = 0x37004,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_gp1_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_gp1_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 4,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_gp2_clk_src = {
+	.cmd_rcgr = 0x38004,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_gp1_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_gp2_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 4,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_gp3_clk_src = {
+	.cmd_rcgr = 0x39004,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_gp1_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_gp3_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 4,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_pcie_aux_phy_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_pcie_aux_phy_clk_src = {
+	.cmd_rcgr = 0x43048,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_3,
+	.freq_tbl = ftbl_gcc_pcie_aux_phy_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pcie_aux_phy_clk_src",
+		.parent_data = gcc_parent_data_3,
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_pcie_rchng_phy_clk_src[] = {
+	F(100000000, P_GPLL0_OUT_EVEN, 3, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_pcie_rchng_phy_clk_src = {
+	.cmd_rcgr = 0x43064,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_pcie_rchng_phy_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pcie_rchng_phy_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 4,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(60000000, P_GPLL0_OUT_MAIN, 10, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_pdm2_clk_src = {
+	.cmd_rcgr = 0x24010,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_pdm2_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pdm2_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_sdcc1_apps_clk_src[] = {
+	F(400000, P_BI_TCXO, 12, 1, 4),
+	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_sdcc1_apps_clk_src = {
+	.cmd_rcgr = 0x1a010,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_sdcc1_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_sdcc1_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_usb30_master_clk_src[] = {
+	F(200000000, P_GPLL0_OUT_EVEN, 1.5, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_usb30_master_clk_src = {
+	.cmd_rcgr = 0x17030,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_usb30_master_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb30_master_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_usb30_mock_utmi_clk_src = {
+	.cmd_rcgr = 0x17048,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_pcie_aux_phy_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb30_mock_utmi_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_usb3_phy_aux_clk_src[] = {
+	F(1000000, P_BI_TCXO, 1, 5, 96),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_usb3_phy_aux_clk_src = {
+	.cmd_rcgr = 0x17070,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_3,
+	.freq_tbl = ftbl_gcc_usb3_phy_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb3_phy_aux_clk_src",
+		.parent_data = gcc_parent_data_3,
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_regmap_div gcc_cpuss_ahb_postdiv_clk_src = {
+	.reg = 0x30024,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gcc_cpuss_ahb_postdiv_clk_src",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &gcc_cpuss_ahb_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div gcc_usb30_mock_utmi_postdiv_clk_src = {
+	.reg = 0x17060,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gcc_usb30_mock_utmi_postdiv_clk_src",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &gcc_usb30_mock_utmi_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_branch gcc_ahb_pcie_link_clk = {
+	.halt_reg = 0x2e004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2e004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ahb_pcie_link_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_ahb_clk = {
+	.halt_reg = 0x1b004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x6d008,
+		.enable_mask = BIT(14),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_qup1_i2c_apps_clk = {
+	.halt_reg = 0x1c008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1c008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup1_i2c_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_qup1_i2c_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_qup1_spi_apps_clk = {
+	.halt_reg = 0x1c004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1c004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup1_spi_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_qup1_spi_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_qup2_i2c_apps_clk = {
+	.halt_reg = 0x1e008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1e008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup2_i2c_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_qup2_i2c_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_qup2_spi_apps_clk = {
+	.halt_reg = 0x1e004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1e004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup2_spi_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_qup2_spi_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_qup3_i2c_apps_clk = {
+	.halt_reg = 0x20008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x20008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup3_i2c_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_qup3_i2c_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_qup3_spi_apps_clk = {
+	.halt_reg = 0x20004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x20004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup3_spi_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_qup3_spi_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_qup4_i2c_apps_clk = {
+	.halt_reg = 0x22008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x22008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup4_i2c_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_qup4_i2c_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_qup4_spi_apps_clk = {
+	.halt_reg = 0x22004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x22004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup4_spi_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_qup4_spi_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_sleep_clk = {
+	.halt_reg = 0x1b00c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x6d008,
+		.enable_mask = BIT(15),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_uart1_apps_clk = {
+	.halt_reg = 0x1d004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1d004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_uart1_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_uart1_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_uart2_apps_clk = {
+	.halt_reg = 0x1f004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1f004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_uart2_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_uart2_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_uart3_apps_clk = {
+	.halt_reg = 0x21004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x21004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_uart3_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_uart3_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_uart4_apps_clk = {
+	.halt_reg = 0x23004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x23004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_uart4_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_blsp1_uart4_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_boot_rom_ahb_clk = {
+	.halt_reg = 0x27004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x27004,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x6d008,
+		.enable_mask = BIT(10),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_boot_rom_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gp1_clk = {
+	.halt_reg = 0x37000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x37000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gp1_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_gp1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gp2_clk = {
+	.halt_reg = 0x38000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x38000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gp2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_gp2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gp3_clk = {
+	.halt_reg = 0x39000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x39000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gp3_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_gp3_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_clkref_en = {
+	.halt_reg = 0x88004,
+	/* The clock controller does not handle the status bit for
+	 * the clocks with gdscs(powerdomains) in hw controlled mode
+	 * and hence avoid checking for the status bit of those clocks
+	 * by setting the BRANCH_HALT_DELAY flag */
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x88004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_aux_clk = {
+	.halt_reg = 0x43034,
+	/* The clock controller does not handle the status bit for
+	 * the clocks with gdscs(powerdomains) in hw controlled mode
+	 * and hence avoid checking for the status bit of those clocks
+	 * by setting the BRANCH_HALT_DELAY flag */
+	.halt_check = BRANCH_HALT_DELAY,
+	.hwcg_reg = 0x43034,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x6d010,
+		.enable_mask = BIT(3),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_cfg_ahb_clk = {
+	.halt_reg = 0x4302c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x4302c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x6d010,
+		.enable_mask = BIT(2),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_mstr_axi_clk = {
+	.halt_reg = 0x43024,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x43024,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x6d010,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_mstr_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_pipe_clk = {
+	.halt_reg = 0x4303c,
+	/* The clock controller does not handle the status bit for
+	 * the clocks with gdscs(powerdomains) in hw controlled mode
+	 * and hence avoid checking for the status bit of those clocks
+	 * by setting the BRANCH_HALT_DELAY flag */
+	.halt_check = BRANCH_HALT_DELAY,
+	.hwcg_reg = 0x4303c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x6d010,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_pipe_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_pipe_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_rchng_phy_clk = {
+	.halt_reg = 0x43030,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x43030,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x6d010,
+		.enable_mask = BIT(7),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_rchng_phy_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_rchng_phy_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_sleep_clk = {
+	.halt_reg = 0x43038,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x43038,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x6d010,
+		.enable_mask = BIT(6),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_sleep_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_aux_phy_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_slv_axi_clk = {
+	.halt_reg = 0x4301c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x4301c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x6d010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_slv_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_slv_q2a_axi_clk = {
+	.halt_reg = 0x43018,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x43018,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x6d010,
+		.enable_mask = BIT(5),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_slv_q2a_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pdm2_clk = {
+	.halt_reg = 0x2400c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2400c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pdm2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pdm2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pdm_ahb_clk = {
+	.halt_reg = 0x24004,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x24004,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x24004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pdm_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pdm_xo4_clk = {
+	.halt_reg = 0x24008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x24008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pdm_xo4_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_rx1_usb2_clkref_en = {
+	.halt_reg = 0x88008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x88008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_rx1_usb2_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_sdcc1_ahb_clk = {
+	.halt_reg = 0x1a00c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1a00c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc1_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_sdcc1_apps_clk = {
+	.halt_reg = 0x1a004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1a004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc1_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_sdcc1_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_master_clk = {
+	.halt_reg = 0x17018,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x17018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_master_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_mock_utmi_clk = {
+	.halt_reg = 0x1702c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1702c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_mock_utmi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw =
+					&gcc_usb30_mock_utmi_postdiv_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_mstr_axi_clk = {
+	.halt_reg = 0x17020,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x17020,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_mstr_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_sleep_clk = {
+	.halt_reg = 0x17028,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x17028,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_slv_ahb_clk = {
+	.halt_reg = 0x17024,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x17024,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_slv_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_phy_aux_clk = {
+	.halt_reg = 0x17064,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x17064,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_phy_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb3_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc usb30_gdsc = {
+	.gdscr = 0x17004,
+	.pd = {
+		.name = "usb30_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc pcie_gdsc = {
+	.gdscr = 0x43004,
+	.pd = {
+		.name = "pcie_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct clk_branch gcc_usb3_phy_pipe_clk = {
+	.halt_reg = 0x17068,
+	/* The clock controller does not handle the status bit for
+	 * the clocks with gdscs(powerdomains) in hw controlled mode
+	 * and hence avoid checking for the status bit of those clocks
+	 * by setting the BRANCH_HALT_DELAY flag */
+	.halt_check = BRANCH_HALT_DELAY,
+	.hwcg_reg = 0x17068,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x17068,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_phy_pipe_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb3_phy_pipe_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_prim_clkref_en = {
+	.halt_reg = 0x88000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x88000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_prim_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb_phy_cfg_ahb2phy_clk = {
+	.halt_reg = 0x19008,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x19008,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x19008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb_phy_cfg_ahb2phy_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_xo_div4_clk = {
+	.halt_reg = 0x2e010,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2e010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_xo_div4_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_xo_pcie_link_clk = {
+	.halt_reg = 0x2e008,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x2e008,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x2e008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_xo_pcie_link_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_regmap *gcc_sdx65_clocks[] = {
+	[GCC_AHB_PCIE_LINK_CLK] = &gcc_ahb_pcie_link_clk.clkr,
+	[GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr,
+	[GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr,
+	[GCC_BLSP1_QUP1_I2C_APPS_CLK_SRC] = &gcc_blsp1_qup1_i2c_apps_clk_src.clkr,
+	[GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr,
+	[GCC_BLSP1_QUP1_SPI_APPS_CLK_SRC] = &gcc_blsp1_qup1_spi_apps_clk_src.clkr,
+	[GCC_BLSP1_QUP2_I2C_APPS_CLK] = &gcc_blsp1_qup2_i2c_apps_clk.clkr,
+	[GCC_BLSP1_QUP2_I2C_APPS_CLK_SRC] = &gcc_blsp1_qup2_i2c_apps_clk_src.clkr,
+	[GCC_BLSP1_QUP2_SPI_APPS_CLK] = &gcc_blsp1_qup2_spi_apps_clk.clkr,
+	[GCC_BLSP1_QUP2_SPI_APPS_CLK_SRC] = &gcc_blsp1_qup2_spi_apps_clk_src.clkr,
+	[GCC_BLSP1_QUP3_I2C_APPS_CLK] = &gcc_blsp1_qup3_i2c_apps_clk.clkr,
+	[GCC_BLSP1_QUP3_I2C_APPS_CLK_SRC] = &gcc_blsp1_qup3_i2c_apps_clk_src.clkr,
+	[GCC_BLSP1_QUP3_SPI_APPS_CLK] = &gcc_blsp1_qup3_spi_apps_clk.clkr,
+	[GCC_BLSP1_QUP3_SPI_APPS_CLK_SRC] = &gcc_blsp1_qup3_spi_apps_clk_src.clkr,
+	[GCC_BLSP1_QUP4_I2C_APPS_CLK] = &gcc_blsp1_qup4_i2c_apps_clk.clkr,
+	[GCC_BLSP1_QUP4_I2C_APPS_CLK_SRC] = &gcc_blsp1_qup4_i2c_apps_clk_src.clkr,
+	[GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr,
+	[GCC_BLSP1_QUP4_SPI_APPS_CLK_SRC] = &gcc_blsp1_qup4_spi_apps_clk_src.clkr,
+	[GCC_BLSP1_SLEEP_CLK] = &gcc_blsp1_sleep_clk.clkr,
+	[GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr,
+	[GCC_BLSP1_UART1_APPS_CLK_SRC] = &gcc_blsp1_uart1_apps_clk_src.clkr,
+	[GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr,
+	[GCC_BLSP1_UART2_APPS_CLK_SRC] = &gcc_blsp1_uart2_apps_clk_src.clkr,
+	[GCC_BLSP1_UART3_APPS_CLK] = &gcc_blsp1_uart3_apps_clk.clkr,
+	[GCC_BLSP1_UART3_APPS_CLK_SRC] = &gcc_blsp1_uart3_apps_clk_src.clkr,
+	[GCC_BLSP1_UART4_APPS_CLK] = &gcc_blsp1_uart4_apps_clk.clkr,
+	[GCC_BLSP1_UART4_APPS_CLK_SRC] = &gcc_blsp1_uart4_apps_clk_src.clkr,
+	[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
+	[GCC_CPUSS_AHB_CLK_SRC] = &gcc_cpuss_ahb_clk_src.clkr,
+	[GCC_CPUSS_AHB_POSTDIV_CLK_SRC] = &gcc_cpuss_ahb_postdiv_clk_src.clkr,
+	[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
+	[GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
+	[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
+	[GCC_GP2_CLK_SRC] = &gcc_gp2_clk_src.clkr,
+	[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
+	[GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr,
+	[GCC_PCIE_0_CLKREF_EN] = &gcc_pcie_0_clkref_en.clkr,
+	[GCC_PCIE_AUX_CLK] = &gcc_pcie_aux_clk.clkr,
+	[GCC_PCIE_AUX_CLK_SRC] = &gcc_pcie_aux_clk_src.clkr,
+	[GCC_PCIE_AUX_PHY_CLK_SRC] = &gcc_pcie_aux_phy_clk_src.clkr,
+	[GCC_PCIE_CFG_AHB_CLK] = &gcc_pcie_cfg_ahb_clk.clkr,
+	[GCC_PCIE_MSTR_AXI_CLK] = &gcc_pcie_mstr_axi_clk.clkr,
+	[GCC_PCIE_PIPE_CLK] = &gcc_pcie_pipe_clk.clkr,
+	[GCC_PCIE_PIPE_CLK_SRC] = &gcc_pcie_pipe_clk_src.clkr,
+	[GCC_PCIE_RCHNG_PHY_CLK] = &gcc_pcie_rchng_phy_clk.clkr,
+	[GCC_PCIE_RCHNG_PHY_CLK_SRC] = &gcc_pcie_rchng_phy_clk_src.clkr,
+	[GCC_PCIE_SLEEP_CLK] = &gcc_pcie_sleep_clk.clkr,
+	[GCC_PCIE_SLV_AXI_CLK] = &gcc_pcie_slv_axi_clk.clkr,
+	[GCC_PCIE_SLV_Q2A_AXI_CLK] = &gcc_pcie_slv_q2a_axi_clk.clkr,
+	[GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr,
+	[GCC_PDM2_CLK_SRC] = &gcc_pdm2_clk_src.clkr,
+	[GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr,
+	[GCC_PDM_XO4_CLK] = &gcc_pdm_xo4_clk.clkr,
+	[GCC_RX1_USB2_CLKREF_EN] = &gcc_rx1_usb2_clkref_en.clkr,
+	[GCC_SDCC1_AHB_CLK] = &gcc_sdcc1_ahb_clk.clkr,
+	[GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr,
+	[GCC_SDCC1_APPS_CLK_SRC] = &gcc_sdcc1_apps_clk_src.clkr,
+	[GCC_USB30_MASTER_CLK] = &gcc_usb30_master_clk.clkr,
+	[GCC_USB30_MASTER_CLK_SRC] = &gcc_usb30_master_clk_src.clkr,
+	[GCC_USB30_MOCK_UTMI_CLK] = &gcc_usb30_mock_utmi_clk.clkr,
+	[GCC_USB30_MOCK_UTMI_CLK_SRC] = &gcc_usb30_mock_utmi_clk_src.clkr,
+	[GCC_USB30_MOCK_UTMI_POSTDIV_CLK_SRC] =	&gcc_usb30_mock_utmi_postdiv_clk_src.clkr,
+	[GCC_USB30_MSTR_AXI_CLK] = &gcc_usb30_mstr_axi_clk.clkr,
+	[GCC_USB30_SLEEP_CLK] = &gcc_usb30_sleep_clk.clkr,
+	[GCC_USB30_SLV_AHB_CLK] = &gcc_usb30_slv_ahb_clk.clkr,
+	[GCC_USB3_PHY_AUX_CLK] = &gcc_usb3_phy_aux_clk.clkr,
+	[GCC_USB3_PHY_AUX_CLK_SRC] = &gcc_usb3_phy_aux_clk_src.clkr,
+	[GCC_USB3_PHY_PIPE_CLK] = &gcc_usb3_phy_pipe_clk.clkr,
+	[GCC_USB3_PHY_PIPE_CLK_SRC] = &gcc_usb3_phy_pipe_clk_src.clkr,
+	[GCC_USB3_PRIM_CLKREF_EN] = &gcc_usb3_prim_clkref_en.clkr,
+	[GCC_USB_PHY_CFG_AHB2PHY_CLK] = &gcc_usb_phy_cfg_ahb2phy_clk.clkr,
+	[GCC_XO_DIV4_CLK] = &gcc_xo_div4_clk.clkr,
+	[GCC_XO_PCIE_LINK_CLK] = &gcc_xo_pcie_link_clk.clkr,
+	[GPLL0] = &gpll0.clkr,
+	[GPLL0_OUT_EVEN] = &gpll0_out_even.clkr,
+};
+
+static const struct qcom_reset_map gcc_sdx65_resets[] = {
+	[GCC_BLSP1_QUP1_BCR] = { 0x1c000 },
+	[GCC_BLSP1_QUP2_BCR] = { 0x1e000 },
+	[GCC_BLSP1_QUP3_BCR] = { 0x20000 },
+	[GCC_BLSP1_QUP4_BCR] = { 0x22000 },
+	[GCC_BLSP1_UART1_BCR] = { 0x1d000 },
+	[GCC_BLSP1_UART2_BCR] = { 0x1f000 },
+	[GCC_BLSP1_UART3_BCR] = { 0x21000 },
+	[GCC_BLSP1_UART4_BCR] = { 0x23000 },
+	[GCC_PCIE_BCR] = { 0x43000 },
+	[GCC_PCIE_LINK_DOWN_BCR] = { 0x77000 },
+	[GCC_PCIE_NOCSR_COM_PHY_BCR] = { 0x78008 },
+	[GCC_PCIE_PHY_BCR] = { 0x44000 },
+	[GCC_PCIE_PHY_CFG_AHB_BCR] = { 0x78000 },
+	[GCC_PCIE_PHY_COM_BCR] = { 0x78004 },
+	[GCC_PCIE_PHY_NOCSR_COM_PHY_BCR] = { 0x7800c },
+	[GCC_PDM_BCR] = { 0x24000 },
+	[GCC_QUSB2PHY_BCR] = { 0x19000 },
+	[GCC_SDCC1_BCR] = { 0x1a000 },
+	[GCC_TCSR_PCIE_BCR] = { 0x57000 },
+	[GCC_USB30_BCR] = { 0x17000 },
+	[GCC_USB3_PHY_BCR] = { 0x18000 },
+	[GCC_USB3PHY_PHY_BCR] = { 0x18004 },
+	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x19004 },
+};
+
+static struct gdsc *gcc_sdx65_gdscs[] = {
+	[USB30_GDSC] = &usb30_gdsc,
+	[PCIE_GDSC] = &pcie_gdsc,
+};
+
+static const struct regmap_config gcc_sdx65_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x1f101c,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc gcc_sdx65_desc = {
+	.config = &gcc_sdx65_regmap_config,
+	.clks = gcc_sdx65_clocks,
+	.num_clks = ARRAY_SIZE(gcc_sdx65_clocks),
+	.resets = gcc_sdx65_resets,
+	.num_resets = ARRAY_SIZE(gcc_sdx65_resets),
+	.gdscs = gcc_sdx65_gdscs,
+	.num_gdscs = ARRAY_SIZE(gcc_sdx65_gdscs),
+};
+
+static const struct of_device_id gcc_sdx65_match_table[] = {
+	{ .compatible = "qcom,gcc-sdx65" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gcc_sdx65_match_table);
+
+static int gcc_sdx65_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+
+	regmap = qcom_cc_map(pdev, &gcc_sdx65_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+	/*
+	 * Keep the clocks always-ON as they are critical to the functioning
+	 * of the system:
+	 * GCC_SYS_NOC_CPUSS_AHB_CLK, GCC_CPUSS_AHB_CLK, GCC_CPUSS_GNOC_CLK
+	 */
+	regmap_update_bits(regmap, 0x6d008, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x6d008, BIT(21), BIT(21));
+	regmap_update_bits(regmap, 0x6d008, BIT(22), BIT(22));
+
+	return qcom_cc_really_probe(pdev, &gcc_sdx65_desc, regmap);
+}
+
+static struct platform_driver gcc_sdx65_driver = {
+	.probe = gcc_sdx65_probe,
+	.driver = {
+		.name = "gcc-sdx65",
+		.of_match_table = gcc_sdx65_match_table,
+	},
+};
+
+static int __init gcc_sdx65_init(void)
+{
+	return platform_driver_register(&gcc_sdx65_driver);
+}
+subsys_initcall(gcc_sdx65_init);
+
+static void __exit gcc_sdx65_exit(void)
+{
+	platform_driver_unregister(&gcc_sdx65_driver);
+}
+module_exit(gcc_sdx65_exit);
+
+MODULE_DESCRIPTION("QTI GCC SDX65 Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.33.1

[PATCH v6 4/5] dt-bindings: clock: Introduce RPMHCC bindings for SDX65

[quic_vamslank]

From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>

Add compatible for SDX65 RPMHCC.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
 Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index 72212970e6f5..0e7e05e38bb2 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -22,6 +22,7 @@ properties:
       - qcom,sc8180x-rpmh-clk
       - qcom,sdm845-rpmh-clk
       - qcom,sdx55-rpmh-clk
+      - qcom,sdx65-rpmh-clk
       - qcom,sm6350-rpmh-clk
       - qcom,sm8150-rpmh-clk
       - qcom,sm8250-rpmh-clk
-- 
2.33.1

[PATCH v6 5/5] clk: qcom: Add support for SDX65 RPMh clocks

[quic_vamslank]

From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>

Add support for clocks maintained by RPMh in SDX65 SoCs.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/clk/qcom/clk-rpmh.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 441d7a20e6f3..30b26fb96514 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -556,6 +556,30 @@ static const struct clk_rpmh_desc clk_rpmh_sm6350 = {
 	.num_clks = ARRAY_SIZE(sm6350_rpmh_clocks),
 };
 
+DEFINE_CLK_RPMH_VRM(sdx65, ln_bb_clk1, ln_bb_clk1_ao, "lnbclka1", 4);
+
+static struct clk_hw *sdx65_rpmh_clocks[] = {
+	[RPMH_CXO_CLK]          = &sc7280_bi_tcxo.hw,
+	[RPMH_CXO_CLK_A]        = &sc7280_bi_tcxo_ao.hw,
+	[RPMH_LN_BB_CLK1]       = &sdx65_ln_bb_clk1.hw,
+	[RPMH_LN_BB_CLK1_A]     = &sdx65_ln_bb_clk1_ao.hw,
+	[RPMH_RF_CLK1]          = &sdm845_rf_clk1.hw,
+	[RPMH_RF_CLK1_A]        = &sdm845_rf_clk1_ao.hw,
+	[RPMH_RF_CLK2]          = &sdm845_rf_clk2.hw,
+	[RPMH_RF_CLK2_A]        = &sdm845_rf_clk2_ao.hw,
+	[RPMH_RF_CLK3]          = &sdm845_rf_clk3.hw,
+	[RPMH_RF_CLK3_A]        = &sdm845_rf_clk3_ao.hw,
+	[RPMH_RF_CLK4]          = &sm8350_rf_clk4.hw,
+	[RPMH_RF_CLK4_A]        = &sm8350_rf_clk4_ao.hw,
+	[RPMH_IPA_CLK]          = &sdm845_ipa.hw,
+	[RPMH_QPIC_CLK]         = &sdx55_qpic_clk.hw,
+};
+
+static const struct clk_rpmh_desc clk_rpmh_sdx65 = {
+	.clks = sdx65_rpmh_clocks,
+	.num_clks = ARRAY_SIZE(sdx65_rpmh_clocks),
+};
+
 static struct clk_hw *of_clk_rpmh_hw_get(struct of_phandle_args *clkspec,
 					 void *data)
 {
@@ -643,6 +667,7 @@ static const struct of_device_id clk_rpmh_match_table[] = {
 	{ .compatible = "qcom,sc8180x-rpmh-clk", .data = &clk_rpmh_sc8180x},
 	{ .compatible = "qcom,sdm845-rpmh-clk", .data = &clk_rpmh_sdm845},
 	{ .compatible = "qcom,sdx55-rpmh-clk",  .data = &clk_rpmh_sdx55},
+	{ .compatible = "qcom,sdx65-rpmh-clk",  .data = &clk_rpmh_sdx65},
 	{ .compatible = "qcom,sm6350-rpmh-clk", .data = &clk_rpmh_sm6350},
 	{ .compatible = "qcom,sm8150-rpmh-clk", .data = &clk_rpmh_sm8150},
 	{ .compatible = "qcom,sm8250-rpmh-clk", .data = &clk_rpmh_sm8250},
-- 
2.33.1

Re: [PATCH v6 2/5] clk: qcom: Add LUCID_EVO PLL type for SDX65

[Stephen Boyd]

Quoting quic_vamslank@quicinc.com (2021-12-01 16:21:32)
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index eaedcceb766f..e0c67b76d8ac 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -1741,35 +1760,47 @@ static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
>                                           LUCID_5LPE_ALPHA_PLL_ACK_LATCH);
>  }
>  
> +static int __clk_lucid_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
> +                                            unsigned long parent_rate, unsigned long enable_vote_run)
> +{
> +        struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
> +       struct regmap *regmap = pll->clkr.regmap;

What's going on with the tabbing here?

> +        int i, val = 0, div, ret;

Do we need to initialize to 0?

> +        u32 mask;
> +
> +        /*
> +         * If the PLL is in FSM mode, then treat set_rate callback as a
> +         * no-operation.
> +         */
> +        ret = regmap_read(regmap, PLL_USER_CTL(pll), &val);
> +        if (ret)
> +                return ret;
> +
> +        if (val & enable_vote_run)
> +                return 0;
> +
> +        if (!pll->post_div_table) {
> +                pr_err("Missing the post_div_table for the PLL\n");

Probably useful to know which PLL is missing a table here.

Re: [PATCH v6 3/5] clk: qcom: Add SDX65 GCC support

[Stephen Boyd]

Quoting quic_vamslank@quicinc.com (2021-12-01 16:21:33)
> +static struct clk_branch gcc_gp3_clk = {
> +       .halt_reg = 0x39000,
> +       .halt_check = BRANCH_HALT,
> +       .clkr = {
> +               .enable_reg = 0x39000,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gcc_gp3_clk",
> +                       .parent_data = &(const struct clk_parent_data){
> +                               .hw = &gcc_gp3_clk_src.clkr.hw,
> +                       },
> +                       .num_parents = 1,
> +                       .flags = CLK_SET_RATE_PARENT,
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gcc_pcie_0_clkref_en = {
> +       .halt_reg = 0x88004,
> +       /* The clock controller does not handle the status bit for

Please leave /* on it's own line for multiline comments.

> +        * the clocks with gdscs(powerdomains) in hw controlled mode
> +        * and hence avoid checking for the status bit of those clocks
> +        * by setting the BRANCH_HALT_DELAY flag */

And */ too

> +       .halt_check = BRANCH_HALT_DELAY,
> +       .clkr = {
> +               .enable_reg = 0x88004,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gcc_pcie_0_clkref_en",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};

Re: [PATCH v6 5/5] clk: qcom: Add support for SDX65 RPMh clocks

[Bjorn Andersson]

On Wed 01 Dec 18:21 CST 2021, quic_vamslank@quicinc.com wrote:

> From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>
> 
> Add support for clocks maintained by RPMh in SDX65 SoCs.
> 
> Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Vinod Koul <vkoul@kernel.org>

The two RPMh patches are independent of the PLL/GCC patches, so I have
picked up the RPMh patches from this series.

Please respin the PLL & GCC patches per Stephen's feedback.


PS. checkpatch --strict complains that the author signature doesn't
match the Signed-off-by, because you have a lowercase 'k' in the From,
but uppercase in the s-o-b. Can you please make sure the two matches in
the future?

Thanks,
Bjorn

> ---
>  drivers/clk/qcom/clk-rpmh.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
> index 441d7a20e6f3..30b26fb96514 100644
> --- a/drivers/clk/qcom/clk-rpmh.c
> +++ b/drivers/clk/qcom/clk-rpmh.c
> @@ -556,6 +556,30 @@ static const struct clk_rpmh_desc clk_rpmh_sm6350 = {
>  	.num_clks = ARRAY_SIZE(sm6350_rpmh_clocks),
>  };
>  
> +DEFINE_CLK_RPMH_VRM(sdx65, ln_bb_clk1, ln_bb_clk1_ao, "lnbclka1", 4);
> +
> +static struct clk_hw *sdx65_rpmh_clocks[] = {
> +	[RPMH_CXO_CLK]          = &sc7280_bi_tcxo.hw,
> +	[RPMH_CXO_CLK_A]        = &sc7280_bi_tcxo_ao.hw,
> +	[RPMH_LN_BB_CLK1]       = &sdx65_ln_bb_clk1.hw,
> +	[RPMH_LN_BB_CLK1_A]     = &sdx65_ln_bb_clk1_ao.hw,
> +	[RPMH_RF_CLK1]          = &sdm845_rf_clk1.hw,
> +	[RPMH_RF_CLK1_A]        = &sdm845_rf_clk1_ao.hw,
> +	[RPMH_RF_CLK2]          = &sdm845_rf_clk2.hw,
> +	[RPMH_RF_CLK2_A]        = &sdm845_rf_clk2_ao.hw,
> +	[RPMH_RF_CLK3]          = &sdm845_rf_clk3.hw,
> +	[RPMH_RF_CLK3_A]        = &sdm845_rf_clk3_ao.hw,
> +	[RPMH_RF_CLK4]          = &sm8350_rf_clk4.hw,
> +	[RPMH_RF_CLK4_A]        = &sm8350_rf_clk4_ao.hw,
> +	[RPMH_IPA_CLK]          = &sdm845_ipa.hw,
> +	[RPMH_QPIC_CLK]         = &sdx55_qpic_clk.hw,
> +};
> +
> +static const struct clk_rpmh_desc clk_rpmh_sdx65 = {
> +	.clks = sdx65_rpmh_clocks,
> +	.num_clks = ARRAY_SIZE(sdx65_rpmh_clocks),
> +};
> +
>  static struct clk_hw *of_clk_rpmh_hw_get(struct of_phandle_args *clkspec,
>  					 void *data)
>  {
> @@ -643,6 +667,7 @@ static const struct of_device_id clk_rpmh_match_table[] = {
>  	{ .compatible = "qcom,sc8180x-rpmh-clk", .data = &clk_rpmh_sc8180x},
>  	{ .compatible = "qcom,sdm845-rpmh-clk", .data = &clk_rpmh_sdm845},
>  	{ .compatible = "qcom,sdx55-rpmh-clk",  .data = &clk_rpmh_sdx55},
> +	{ .compatible = "qcom,sdx65-rpmh-clk",  .data = &clk_rpmh_sdx65},
>  	{ .compatible = "qcom,sm6350-rpmh-clk", .data = &clk_rpmh_sm6350},
>  	{ .compatible = "qcom,sm8150-rpmh-clk", .data = &clk_rpmh_sm8150},
>  	{ .compatible = "qcom,sm8250-rpmh-clk", .data = &clk_rpmh_sm8250},
> -- 
> 2.33.1
> 

Re: (subset) [PATCH v6 0/5] Add GCC and RPMh clock support for SDX65

[Bjorn Andersson]

On Wed, 1 Dec 2021 16:21:30 -0800, quic_vamslank@quicinc.com wrote:
> From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
> 
> Hello,
> Changes from v5:
>  - Collected Vinod Koul's and Rob's Reviewed-by for the patches
>  - Rebased on the latest tip of Torvald's tree (MAINTAINERS: co-maintain random.c)
> 
> [...]

Applied, thanks!

[4/5] dt-bindings: clock: Introduce RPMHCC bindings for SDX65
      commit: aa848c8ee8915b2a8c973d90f1c7f8e96d17fd25
[5/5] clk: qcom: Add support for SDX65 RPMh clocks
      commit: 40affbf8e615addd8cc877f0a4fff1faafc4bb34

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>

Re: (subset) [PATCH v6 4/5] dt-bindings: clock: Introduce RPMHCC bindings for SDX65

[Bjorn Andersson]

On Wed, 1 Dec 2021 16:21:34 -0800, quic_vamslank@quicinc.com wrote:
> From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>
> 
> Add compatible for SDX65 RPMHCC.
> 
> 

Applied, thanks!

[4/5] dt-bindings: clock: Introduce RPMHCC bindings for SDX65
      commit: aa848c8ee8915b2a8c973d90f1c7f8e96d17fd25

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>

Re: (subset) [PATCH v6 5/5] clk: qcom: Add support for SDX65 RPMh clocks

[Bjorn Andersson]

On Wed, 1 Dec 2021 16:21:35 -0800, quic_vamslank@quicinc.com wrote:
> From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>
> 
> Add support for clocks maintained by RPMh in SDX65 SoCs.
> 
> 

Applied, thanks!

[5/5] clk: qcom: Add support for SDX65 RPMh clocks
      commit: 40affbf8e615addd8cc877f0a4fff1faafc4bb34

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>

Re: [PATCH v6 3/5] clk: qcom: Add SDX65 GCC support

[Vamsi Krishna Lanka]

On Thu, Dec 02, 2021 at 04:20:09PM -0800, Stephen Boyd wrote:
> Quoting quic_vamslank@quicinc.com (2021-12-01 16:21:33)
> > +static struct clk_branch gcc_gp3_clk = {
> > +       .halt_reg = 0x39000,
> > +       .halt_check = BRANCH_HALT,
> > +       .clkr = {
> > +               .enable_reg = 0x39000,
> > +               .enable_mask = BIT(0),
> > +               .hw.init = &(struct clk_init_data){
> > +                       .name = "gcc_gp3_clk",
> > +                       .parent_data = &(const struct clk_parent_data){
> > +                               .hw = &gcc_gp3_clk_src.clkr.hw,
> > +                       },
> > +                       .num_parents = 1,
> > +                       .flags = CLK_SET_RATE_PARENT,
> > +                       .ops = &clk_branch2_ops,
> > +               },
> > +       },
> > +};
> > +
> > +static struct clk_branch gcc_pcie_0_clkref_en = {
> > +       .halt_reg = 0x88004,
> > +       /* The clock controller does not handle the status bit for
> 
> Please leave /* on it's own line for multiline comments.

Will do.

> 
> > +        * the clocks with gdscs(powerdomains) in hw controlled mode
> > +        * and hence avoid checking for the status bit of those clocks
> > +        * by setting the BRANCH_HALT_DELAY flag */
> 
> And */ too

Will do.

> 
> > +       .halt_check = BRANCH_HALT_DELAY,
> > +       .clkr = {
> > +               .enable_reg = 0x88004,
> > +               .enable_mask = BIT(0),
> > +               .hw.init = &(struct clk_init_data){
> > +                       .name = "gcc_pcie_0_clkref_en",
> > +                       .ops = &clk_branch2_ops,
> > +               },
> > +       },
> > +};

Thanks,
Vamsi

Re: [PATCH v6 2/5] clk: qcom: Add LUCID_EVO PLL type for SDX65

[Vamsi Krishna Lanka]

On Thu, Dec 02, 2021 at 04:18:43PM -0800, Stephen Boyd wrote:
> Quoting quic_vamslank@quicinc.com (2021-12-01 16:21:32)
> > diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> > index eaedcceb766f..e0c67b76d8ac 100644
> > --- a/drivers/clk/qcom/clk-alpha-pll.c
> > +++ b/drivers/clk/qcom/clk-alpha-pll.c
> > @@ -1741,35 +1760,47 @@ static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
> >                                           LUCID_5LPE_ALPHA_PLL_ACK_LATCH);
> >  }
> >  
> > +static int __clk_lucid_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
> > +                                            unsigned long parent_rate, unsigned long enable_vote_run)
> > +{
> > +        struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
> > +       struct regmap *regmap = pll->clkr.regmap;
> 
> What's going on with the tabbing here?

Yes, actually i used a tab instead of space here. I will correct it.

> 
> > +        int i, val = 0, div, ret;
> 
> Do we need to initialize to 0?

Not needed. Will remove.

> 
> > +        u32 mask;
> > +
> > +        /*
> > +         * If the PLL is in FSM mode, then treat set_rate callback as a
> > +         * no-operation.
> > +         */
> > +        ret = regmap_read(regmap, PLL_USER_CTL(pll), &val);
> > +        if (ret)
> > +                return ret;
> > +
> > +        if (val & enable_vote_run)
> > +                return 0;
> > +
> > +        if (!pll->post_div_table) {
> > +                pr_err("Missing the post_div_table for the PLL\n");
> 
> Probably useful to know which PLL is missing a table here.

I think that's a good idea on returning which PLL is missing a table. 


Thanks,
Vamsi