Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Luca Weiss <luca@z3ntu.xyz>
To: Brian Masney <masneyb@onstation.org>
Cc: linux-arm-msm@vger.kernel.org,
	~martijnbraam/pmos-upstream@lists.sr.ht,
	Andy Gross <agross@kernel.org>,
	David Brown <david.brown@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: dts: msm8974-FP2: add reboot-mode node
Date: Sat, 13 Jul 2019 13:26:45 +0200
Message-ID: <3733253.hEy9q5iLy3@g550jk> (raw)
In-Reply-To: <20190622014302.GA20947@onstation.org>

Hi Brian,
how about something like that (formatting is surely broken because I'm not 
sending this with git-send-email^^)?

I'd says this should be work fine with all devices as all modes are defined in 
the device-specific dts but the reg and offset values are in the board dts. 
Should I also add a status = "disabled" to the reboot-mode node in the board 
dts?

diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/
dts/qcom-msm8974-fairphone-fp2.dts
index 643c57f84818..ff4a3e0aa746 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -338,6 +338,16 @@
 			};
 		};
 	};
+
+	imem@fe805000 {
+		status = "okay";
+
+		reboot-mode {
+			mode-normal	= <0x77665501>;
+			mode-bootloader	= <0x77665500>;
+			mode-recovery	= <0x77665502>;
+		};
+	};
 };
 
 &spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-
msm8974.dtsi
index 45b5c8ef0374..1927430bded7 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1085,6 +1085,17 @@
 				};
 			};
 		};
+
+		imem@fe805000 {
+			status = "disabled";
+			compatible = "syscon", "simple-mfd";
+			reg = <0xfe805000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+			};
+		};
 	};
 
 	smd {


Regards,
Luca



  reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-20 22:58 Luca Weiss
2019-06-21  0:01 ` Brian Masney
2019-06-21 19:25   ` Luca Weiss
2019-06-22  1:43     ` Brian Masney
2019-07-13 11:26       ` Luca Weiss [this message]
2019-07-13 14:31         ` Brian Masney

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3733253.hEy9q5iLy3@g550jk \
    --to=luca@z3ntu.xyz \
    --cc=agross@kernel.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=masneyb@onstation.org \
    --cc=robh+dt@kernel.org \
    --cc=~martijnbraam/pmos-upstream@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox