linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thara Gopinath <thara.gopinath@linaro.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: agross@kernel.org, rui.zhang@intel.com,
	daniel.lezcano@linaro.org, viresh.kumar@linaro.org,
	rjw@rjwysocki.net, robh+dt@kernel.org, tdas@codeaurora.org,
	mka@chromium.org, linux-arm-msm@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [Patch v3 2/6] thermal: qcom: Add support for LMh driver
Date: Mon, 12 Jul 2021 20:49:45 -0400	[thread overview]
Message-ID: <3ef6cda9-a5dc-45c4-3e66-8da0f210cf93@linaro.org> (raw)
In-Reply-To: <YOkezJ3gEm6nmQq6@yoga>

Hi Bjorn,

Thanks for the review

On 7/10/21 12:15 AM, Bjorn Andersson wrote:
> On Thu 08 Jul 07:06 CDT 2021, Thara Gopinath wrote:
> 
>> Driver enabling various pieces of Limits Management Hardware(LMh) for cpu
>> cluster0 and cpu cluster1 namely kick starting monitoring of temperature,
>> current, battery current violations, enabling reliability algorithm and
>> setting up various temperature limits.
>>
>> The following has been explained in the cover letter. I am including this
>> here so that this remains in the commit message as well.
>>
>> LMh is a hardware infrastructure on some Qualcomm SoCs that can enforce
>> temperature and current limits as programmed by software for certain IPs
>> like CPU. On many newer LMh is configured by firmware/TZ and no programming
>> is needed from the kernel side. But on certain SoCs like sdm845 the
>> firmware does not do a complete programming of the h/w. On such soc's
>> kernel software has to explicitly set up the temperature limits and turn on
>> various monitoring and enforcing algorithms on the hardware.
>>
>> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
>> ---
>>
>> v2->v3:
>> 	- Rearranged enabling of various LMh subfunction and removed returning
>> 	  on error in enabling any one subfunction as the different pieces can
>> 	  operate and thus be enabled independently.
>> 	- Other minor cosmetic fixes.
>>
>> v1->v2:
>> 	- Cosmetic and spelling fixes from review comments from Randy Dunlap
>> 	- Added irq_disable to lmh_irq_ops and removed disabling of irq from
>> 	  lmh_handle_irq. Now cpufreq explicitly disables irq prior to
>> 	  handling it as per Bjorn's suggestion.
>> 	- Rebased to new version of qcom_scm_lmh_dcvsh as changed in patch 1.
>> 	- Removed generic dt compatible string and introduced platform specific one
>> 	  as per Bjorn's suggestion.
>> 	- Take arm, low and high temp thresholds for LMh from dt properties instead of
>> 	  #defines in the driver as per Daniel's suggestion.
>> 	- Other minor fixes.
>>   drivers/thermal/qcom/Kconfig  |  10 ++
>>   drivers/thermal/qcom/Makefile |   1 +
>>   drivers/thermal/qcom/lmh.c    | 239 ++++++++++++++++++++++++++++++++++
>>   3 files changed, 250 insertions(+)
>>   create mode 100644 drivers/thermal/qcom/lmh.c
>>
>> diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
>> index 8d5ac2df26dc..7d942f71e532 100644
>> --- a/drivers/thermal/qcom/Kconfig
>> +++ b/drivers/thermal/qcom/Kconfig
>> @@ -31,3 +31,13 @@ config QCOM_SPMI_TEMP_ALARM
>>   	  trip points. The temperature reported by the thermal sensor reflects the
>>   	  real time die temperature if an ADC is present or an estimate of the
>>   	  temperature based upon the over temperature stage value.
>> +
>> +config QCOM_LMH
>> +	tristate "Qualcomm Limits Management Hardware"
>> +	depends on ARCH_QCOM
>> +	help
>> +	  This enables initialization of Qualcomm limits management
>> +	  hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on
>> +	  input from temperature and current sensors.  On many newer Qualcomm SoCs
>> +	  LMh is configured in the firmware and this feature need not be enabled.
>> +	  However, on certain SoCs like sdm845 LMh has to be configured from kernel.
>> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
>> index 252ea7d9da0b..0fa2512042e7 100644
>> --- a/drivers/thermal/qcom/Makefile
>> +++ b/drivers/thermal/qcom/Makefile
>> @@ -5,3 +5,4 @@ qcom_tsens-y			+= tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \
>>   				   tsens-8960.o
>>   obj-$(CONFIG_QCOM_SPMI_ADC_TM5)	+= qcom-spmi-adc-tm5.o
>>   obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
>> +obj-$(CONFIG_QCOM_LMH)		+= lmh.o
>> diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
>> new file mode 100644
>> index 000000000000..a7b1eb308642
>> --- /dev/null
>> +++ b/drivers/thermal/qcom/lmh.c
>> @@ -0,0 +1,239 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +
>> +/*
>> + * Copyright (C) 2021, Linaro Limited. All rights reserved.
>> + */
>> +#include <linux/module.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irqdomain.h>
>> +#include <linux/err.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/slab.h>
>> +#include <linux/qcom_scm.h>
>> +
>> +#define LMH_NODE_DCVS			0x44435653
>> +#define LMH_CLUSTER0_NODE_ID		0x6370302D
>> +#define LMH_CLUSTER1_NODE_ID		0x6370312D
>> +
>> +#define LMH_SUB_FN_THERMAL		0x54484D4C
>> +#define LMH_SUB_FN_CRNT			0x43524E54
>> +#define LMH_SUB_FN_REL			0x52454C00
>> +#define LMH_SUB_FN_BCL			0x42434C00
>> +
>> +#define LMH_ALGO_MODE_ENABLE		0x454E424C
>> +#define LMH_TH_HI_THRESHOLD		0x48494748
>> +#define LMH_TH_LOW_THRESHOLD		0x4C4F5700
>> +#define LMH_TH_ARM_THRESHOLD		0x41524D00
>> +
>> +#define LMH_REG_DCVS_INTR_CLR		0x8
>> +
>> +struct lmh_hw_data {
>> +	void __iomem *base;
>> +	struct irq_domain *domain;
>> +	int irq;
>> +	u32 cpu_id;
> 
> cpu_id seems to only be used in lmh_probe(), how about making it a local
> variable?

yes, it makes sense. I will make it local.

> 
>> +};
>> +
>> +static irqreturn_t lmh_handle_irq(int hw_irq, void *data)
>> +{
>> +	struct lmh_hw_data *lmh_data = data;
>> +	int irq = irq_find_mapping(lmh_data->domain, 0);
>> +
>> +	/* Call the cpufreq driver to handle the interrupt */
>> +	if (irq)
>> +		generic_handle_irq(irq);
>> +
>> +	return 0;
>> +}
>> +
>> +static void lmh_enable_interrupt(struct irq_data *d)
>> +{
>> +	struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d);
>> +
>> +	/* Clear the existing interrupt */
>> +	writel(0xff, lmh_data->base + LMH_REG_DCVS_INTR_CLR);
>> +	enable_irq(lmh_data->irq);
>> +}
>> +
>> +static void lmh_disable_interrupt(struct irq_data *d)
>> +{
>> +	struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d);
>> +
>> +	disable_irq_nosync(lmh_data->irq);
>> +}
>> +
>> +static struct irq_chip lmh_irq_chip = {
>> +	.name           = "lmh",
>> +	.irq_enable	= lmh_enable_interrupt,
>> +	.irq_disable	= lmh_disable_interrupt
>> +};
>> +
>> +static int lmh_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
>> +{
>> +	struct lmh_hw_data *lmh_data = d->host_data;
>> +
>> +	irq_set_chip_and_handler(irq, &lmh_irq_chip, handle_simple_irq);
>> +	irq_set_chip_data(irq, lmh_data);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct irq_domain_ops lmh_irq_ops = {
>> +	.map = lmh_irq_map,
>> +	.xlate = irq_domain_xlate_onecell,
>> +};
>> +
>> +static int lmh_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev;
>> +	struct device_node *np;
>> +	struct lmh_hw_data *lmh_data;
>> +	u32 node_id;
>> +	int temp_low, temp_high, temp_arm, ret;
>> +
>> +	dev = &pdev->dev;
>> +	np = dev->of_node;
> 
> How about initialize these as you declare you variables?

ok.

> 
>> +	if (!np)
> 
> There's no reasonable way to probe this driver with !dev->of_node, so
> you can skip this check.

ok.

> 
>> +		return -EINVAL;
>> +
>> +	lmh_data = devm_kzalloc(dev, sizeof(*lmh_data), GFP_KERNEL);
>> +	if (!lmh_data)
>> +		return -ENOMEM;
>> +
>> +	lmh_data->base = devm_platform_ioremap_resource(pdev, 0);
>> +	if (IS_ERR(lmh_data->base))
>> +		return PTR_ERR(lmh_data->base);
>> +
>> +	ret = of_property_read_u32(np, "qcom,lmh-cpu-id", &lmh_data->cpu_id);
>> +	if (ret) {
>> +		dev_err(dev, "missing qcom,lmh-cpu-id property\n");
>> +		return ret;
>> +	}
>> +
>> +	ret = of_property_read_u32(np, "qcom,lmh-temperature-high", &temp_high);
>> +	if (ret) {
>> +		dev_err(dev, "missing qcom,lmh-temperature-high property\n");
>> +		return ret;
>> +	}
>> +
>> +	ret = of_property_read_u32(np, "qcom,lmh-temperature-low", &temp_low);
>> +	if (ret) {
>> +		dev_err(dev, "missing qcom,lmh-temperature-low property\n");
>> +		return ret;
>> +	}
>> +
>> +	ret = of_property_read_u32(np, "qcom,lmh-temperature-arm", &temp_arm);
>> +	if (ret) {
>> +		dev_err(dev, "missing qcom,lmh-temperature-arm property\n");
>> +		return ret;
>> +	}
>> +
>> +	/*
>> +	 * Only sdm845 has lmh hardware currently enabled from hlos. If this is needed
>> +	 * for other platforms, revisit this to check if the <cpu-id, node-id> should be part
>> +	 * of a dt match table.
>> +	 */
>> +	if (lmh_data->cpu_id == 0) {
>> +		node_id = LMH_CLUSTER0_NODE_ID;
>> +	} else if (lmh_data->cpu_id == 4) {
>> +		node_id = LMH_CLUSTER1_NODE_ID;
>> +	} else {
>> +		dev_err(dev, "Wrong CPU id associated with LMh node\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	platform_set_drvdata(pdev, lmh_data);
> 
> I don't see any get_drvdat(), so you can probably skip this?

Yes. I will remove it. I think it is  stray remaining from one of the 
earlier revisions.

> 
>> +
>> +	if (!qcom_scm_lmh_dcvsh_available())
>> +		return -EINVAL;
>> +
>> +	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
>> +				 LMH_NODE_DCVS, node_id, 0);
>> +	if (ret)
>> +		dev_err(dev, "Error %d enabling current subfunction\n", ret);
>> +
>> +	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
>> +				 LMH_NODE_DCVS, node_id, 0);
>> +	if (ret)
>> +		dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
>> +
>> +	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
>> +				 LMH_NODE_DCVS, node_id, 0);
>> +	if (ret)
>> +		dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
>> +
>> +	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
>> +				 LMH_NODE_DCVS, node_id, 0);
>> +	if (ret) {
>> +		dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = qcom_scm_lmh_profile_change(0x1);
>> +	if (ret) {
>> +		dev_err(dev, "Error %d changing profile\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	/* Set default thermal trips */
>> +	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_ARM_THRESHOLD, temp_arm,
>> +				 LMH_NODE_DCVS, node_id, 0);
>> +	if (ret) {
>> +		dev_err(dev, "Error setting thermal ARM threshold%d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_HI_THRESHOLD, temp_high,
>> +				 LMH_NODE_DCVS, node_id, 0);
>> +	if (ret) {
>> +		dev_err(dev, "Error setting thermal HI threshold%d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_LOW_THRESHOLD, temp_low,
>> +				 LMH_NODE_DCVS, node_id, 0);
>> +	if (ret) {
>> +		dev_err(dev, "Error setting thermal ARM threshold%d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	lmh_data->irq = platform_get_irq(pdev, 0);
>> +	lmh_data->domain = irq_domain_add_linear(np, 1, &lmh_irq_ops, lmh_data);
>> +	if (!lmh_data->domain) {
>> +		dev_err(dev, "Error adding irq_domain\n");
>> +		return -EINVAL;
>> +	}
>> +
> 
> As written now, you might get interrupts before you get to disable_irq()
> below. Instead of the disable_irq() you can add this before request_irq:
> 
> 	irq_set_status_flags(lmh_dat->irq, IRQ_NOAUTOEN);
> 
>> +	ret = devm_request_irq(dev, lmh_data->irq, lmh_handle_irq,
>> +			       IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_SUSPEND,
> 
> Skip IRQF_TRIGGER_HIGH, as the flags will be merged with the properties
> from DT.
> 
>> +			       "lmh-irq", lmh_data);
>> +	if (ret) {
>> +		dev_err(dev, "Error %d registering irq %x\n", ret, lmh_data->irq);
>> +		irq_domain_remove(lmh_data->domain);
>> +		return ret;
>> +	}
>> +
>> +	/* Disable the irq and let cpufreq enable it when ready to handle the interrupt */
>> +	disable_irq(lmh_data->irq);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id lmh_table[] = {
>> +	{ .compatible = "qcom,sdm845-lmh", },
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(of, lmh_table);
>> +
>> +static struct platform_driver lmh_driver = {
>> +	.probe = lmh_probe,
> 
> I think you at least need to irq_domain_remove() during .remove, but
> unless we have a clear understanding about how to stop the algorithm
> (without causing harmful side effects) it might be better to add
> .suppress_bind_attrs = true in .driver...

sounds good. Like you said, I am not sure what is the right way to 
disable the algorithm. So I will add suppress_bind_attrs = true to 
prevent user space from doing something silly.

-- 
Warm Regards
Thara (She/Her/Hers)

  reply	other threads:[~2021-07-13  0:49 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-08 12:06 [Patch v3 0/6] Introduce LMh driver for Qualcomm SoCs Thara Gopinath
2021-07-08 12:06 ` [Patch v3 1/6] firmware: qcom_scm: Introduce SCM calls to access LMh Thara Gopinath
2021-07-10  4:02   ` Bjorn Andersson
2021-07-08 12:06 ` [Patch v3 2/6] thermal: qcom: Add support for LMh driver Thara Gopinath
2021-07-10  4:15   ` Bjorn Andersson
2021-07-13  0:49     ` Thara Gopinath [this message]
2021-07-08 12:06 ` [Patch v3 3/6] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support Thara Gopinath
2021-07-08 20:00   ` kernel test robot
2021-07-09  6:46   ` Viresh Kumar
2021-07-09 15:37     ` Thara Gopinath
2021-07-12  4:35       ` Viresh Kumar
2021-07-12  4:41       ` Viresh Kumar
2021-07-13  1:18         ` Thara Gopinath
2021-07-13  3:18           ` Viresh Kumar
2021-07-14 12:37             ` Thara Gopinath
2021-07-10  4:57   ` Bjorn Andersson
2021-07-13  1:09     ` Thara Gopinath
2021-07-08 12:06 ` [Patch v3 4/6] arm64: boot: dts: qcom: sdm45: Add support for LMh node Thara Gopinath
2021-07-10  4:17   ` Bjorn Andersson
2021-07-19 16:33   ` Bjorn Andersson
2021-07-19 22:44     ` Thara Gopinath
2021-07-08 12:06 ` [Patch v3 5/6] arm64: boot: dts: qcom: sdm845: Remove cpufreq cooling devices for CPU thermal zones Thara Gopinath
2021-07-10  4:17   ` Bjorn Andersson
2021-07-08 12:06 ` [Patch v3 6/6] dt-bindings: thermal: Add dt binding for QCOM LMh Thara Gopinath
2021-07-10  4:21   ` Bjorn Andersson
2021-07-13  0:54     ` Thara Gopinath
2021-07-12 17:32   ` Rob Herring
2021-07-22  3:14 ` [Patch v3 0/6] Introduce LMh driver for Qualcomm SoCs Steev Klimaszewski
2021-07-27 15:29   ` Thara Gopinath
2021-07-27 17:43     ` Steev Klimaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3ef6cda9-a5dc-45c4-3e66-8da0f210cf93@linaro.org \
    --to=thara.gopinath@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=tdas@codeaurora.org \
    --cc=viresh.kumar@linaro.org \
    --subject='Re: [Patch v3 2/6] thermal: qcom: Add support for LMh driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).