linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: sbhanu@codeaurora.org
To: Adrian Hunter <adrian.hunter@intel.com>
Cc: ulf.hansson@linaro.org, asutoshd@codeaurora.org,
	stummala@codeaurora.org, vbadigan@codeaurora.org,
	rampraka@codeaurora.org, sayalil@codeaurora.org,
	sartgarg@codeaurora.org, rnayak@codeaurora.org,
	cang@codeaurora.org, pragalla@codeaurora.org,
	nitirawa@codeaurora.org, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	agross@kernel.org, bjorn.andersson@linaro.org,
	robh+dt@kernel.org
Subject: Re: [PATCH V2] mmc: sdhci: Update the software timeout value for sdhc
Date: Thu, 01 Jul 2021 22:28:48 +0530	[thread overview]
Message-ID: <467960e793b39ffd13e8d5c5c3b87057@codeaurora.org> (raw)
In-Reply-To: <3217c101-534b-bfcb-7ba9-5749d73cf242@intel.com>

On 2021-06-30 19:38, Adrian Hunter wrote:
> On 27/06/21 5:40 pm, Shaik Sajida Bhanu wrote:
>> Whenever SDHC run at clock rate 50MHZ or below, the hardware data
>> timeout value will be 21.47secs, which is approx. 22secs and we have
>> a current software timeout value as 10secs. We have to set software
>> timeout value more than the hardware data timeout value to avioid 
>> seeing
>> the below register dumps.
>> 
>> [  332.953670] mmc2: Timeout waiting for hardware interrupt.
>> [  332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP 
>> ===========
>> [  332.966450] mmc2: sdhci: Sys addr:  0x00000000 | Version:  
>> 0x00007202
>> [  332.973256] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  
>> 0x00000001
>> [  332.980054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 
>> 0x00000027
>> [  332.986864] mmc2: sdhci: Present:   0x01f801f6 | Host ctl: 
>> 0x0000001f
>> [  332.993671] mmc2: sdhci: Power:     0x00000001 | Blk gap:  
>> 0x00000000
>> [  333.000583] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    
>> 0x00000007
>> [  333.007386] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 
>> 0x00000000
>> [  333.014182] mmc2: sdhci: Int enab:  0x03ff100b | Sig enab: 
>> 0x03ff100b
>> [  333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 
>> 0x00000000
>> [  333.027771] mmc2: sdhci: Caps:      0x322dc8b2 | Caps_1:   
>> 0x0000808f
>> [  333.034561] mmc2: sdhci: Cmd:       0x0000183a | Max curr: 
>> 0x00000000
>> [  333.041359] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  
>> 0x00000000
>> [  333.048157] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  
>> 0x00000000
>> [  333.054945] mmc2: sdhci: Host ctl2: 0x00000000
>> [  333.059657] mmc2: sdhci: ADMA Err:  0x00000000 | ADMA Ptr:
>> 0x0000000ffffff218
>> [  333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
>> -----------
>> [  333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
>> 0x6000642c | DLL cfg2: 0x0020a000
>> [  333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
>> 0x00000000 | DDR cfg: 0x80040873
>> [  333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
>> 0xf88218a8 Vndr func3: 0x02626040
>> [  333.102371] mmc2: sdhci: 
>> ============================================
>> 
>> So, set software timeout value more than hardware timeout value.
>> 
>> Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
>> ---
>> 
>> Changes since V1:
>> 	- Moved software data timeout update part to qcom specific file as
>> 	  suggested by Veerabhadrarao Badiganti.
>> ---
>>  drivers/mmc/host/sdhci-msm.c | 9 +++++++++
>>  1 file changed, 9 insertions(+)
>> 
>> diff --git a/drivers/mmc/host/sdhci-msm.c 
>> b/drivers/mmc/host/sdhci-msm.c
>> index e44b7a6..58e651e 100644
>> --- a/drivers/mmc/host/sdhci-msm.c
>> +++ b/drivers/mmc/host/sdhci-msm.c
>> @@ -2089,6 +2089,14 @@ static void sdhci_msm_cqe_disable(struct 
>> mmc_host *mmc, bool recovery)
>>  	sdhci_cqe_disable(mmc, recovery);
>>  }
>> 
>> +static void sdhci_msm_set_timeout(struct sdhci_host *host, struct 
>> mmc_command *cmd)
>> +{
>> +
>> +	__sdhci_set_timeout(host, cmd);
>> +	if (cmd && (cmd->data) && (host->clock > 400000) && (host->clock <= 
>> 50000000))
> 
> There are some redundant parenthesis there and cmd is never NULL i.e. 
> could be:
> 
> 	if (cmd->data && host->clock > 400000 && host->clock <= 50000000)
Sure
> 
>> +		host->data_timeout = 22 * NSEC_PER_SEC;
> 
> That needs to be 22LL to make the compiler warning go away
> 
Sure
>> +}
>> +
>>  static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
>>  	.enable		= sdhci_msm_cqe_enable,
>>  	.disable	= sdhci_msm_cqe_disable,
>> @@ -2438,6 +2446,7 @@ static const struct sdhci_ops sdhci_msm_ops = {
>>  	.irq	= sdhci_msm_cqe_irq,
>>  	.dump_vendor_regs = sdhci_msm_dump_vendor_regs,
>>  	.set_power = sdhci_set_power_noreg,
>> +	.set_timeout = sdhci_msm_set_timeout,
>>  };
>> 
>>  static const struct sdhci_pltfm_data sdhci_msm_pdata = {
>> 

  reply	other threads:[~2021-07-01 16:58 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-27 14:40 [PATCH V2] mmc: sdhci: Update the software timeout value for sdhc Shaik Sajida Bhanu
2021-06-30 14:08 ` Adrian Hunter
2021-07-01 16:58   ` sbhanu [this message]
2021-07-05 14:09     ` sbhanu
2021-07-07 18:03       ` Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=467960e793b39ffd13e8d5c5c3b87057@codeaurora.org \
    --to=sbhanu@codeaurora.org \
    --cc=adrian.hunter@intel.com \
    --cc=agross@kernel.org \
    --cc=asutoshd@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=cang@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=nitirawa@codeaurora.org \
    --cc=pragalla@codeaurora.org \
    --cc=rampraka@codeaurora.org \
    --cc=rnayak@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=sartgarg@codeaurora.org \
    --cc=sayalil@codeaurora.org \
    --cc=stummala@codeaurora.org \
    --cc=ulf.hansson@linaro.org \
    --cc=vbadigan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).