From: Asutosh Das <asutoshd@codeaurora.org>
To: cang@codeaurora.org, martin.petersen@oracle.com,
linux-scsi@vger.kernel.org
Cc: Asutosh Das <asutoshd@codeaurora.org>,
linux-arm-msm@vger.kernel.org,
Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@wdc.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
Stanley Chu <stanley.chu@mediatek.com>,
Bean Huo <beanhuo@micron.com>,
Bart Van Assche <bvanassche@acm.org>,
Venkat Gopalakrishnan <venkatg@codeaurora.org>,
Tomas Winkler <tomas.winkler@intel.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v1 2/3] scsi: ufshcd: Let vendor override devfreq parameters
Date: Tue, 24 Mar 2020 17:07:04 -0700 [thread overview]
Message-ID: <59a83a2dba7d7f2be4bd4af56267fee8d1c5bb7c.1585094538.git.asutoshd@codeaurora.org> (raw)
In-Reply-To: <ebd9ea7d0ebb1884b15e4fe7e3e03460c1e3c52b.1585094538.git.asutoshd@codeaurora.org>
In-Reply-To: <ebd9ea7d0ebb1884b15e4fe7e3e03460c1e3c52b.1585094538.git.asutoshd@codeaurora.org>
Vendor drivers may have a need to update the polling interval
and thresholds.
Provide a vops for vendor drivers to use.
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 11 ++++++++++-
drivers/scsi/ufs/ufshcd.h | 12 ++++++++++++
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 4607bc6..7643ef5 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1300,6 +1300,13 @@ static struct devfreq_dev_profile ufs_devfreq_profile = {
.get_dev_status = ufshcd_devfreq_get_dev_status,
};
+#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
+static struct devfreq_simple_ondemand_data ufs_ondemand_data;
+static void *gov_data = &ufs_ondemand_data;
+#else
+static void *gov_data = NULL;
+#endif
+
static int ufshcd_devfreq_init(struct ufs_hba *hba)
{
struct list_head *clk_list = &hba->clk_list_head;
@@ -1315,10 +1322,12 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba)
dev_pm_opp_add(hba->dev, clki->min_freq, 0);
dev_pm_opp_add(hba->dev, clki->max_freq, 0);
+ ufshcd_vops_config_scaling_param(hba, &ufs_devfreq_profile,
+ gov_data);
devfreq = devfreq_add_device(hba->dev,
&ufs_devfreq_profile,
DEVFREQ_GOV_SIMPLE_ONDEMAND,
- NULL);
+ gov_data);
if (IS_ERR(devfreq)) {
ret = PTR_ERR(devfreq);
dev_err(hba->dev, "Unable to register with devfreq %d\n", ret);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index d45a044..e8e8ee2 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -56,6 +56,7 @@
#include <linux/completion.h>
#include <linux/regulator/consumer.h>
#include <linux/bitfield.h>
+#include <linux/devfreq.h>
#include "unipro.h"
#include <asm/irq.h>
@@ -327,6 +328,9 @@ struct ufs_hba_variant_ops {
void (*dbg_register_dump)(struct ufs_hba *hba);
int (*phy_initialization)(struct ufs_hba *);
void (*device_reset)(struct ufs_hba *hba);
+ void (*config_scaling_param)(struct ufs_hba *hba,
+ struct devfreq_dev_profile *profile,
+ void *data);
};
/* clock gating state */
@@ -1083,6 +1087,14 @@ static inline void ufshcd_vops_device_reset(struct ufs_hba *hba)
}
}
+static inline void ufshcd_vops_config_scaling_param(struct ufs_hba *hba,
+ struct devfreq_dev_profile
+ *profile, void *data)
+{
+ if (hba->vops && hba->vops->config_scaling_param)
+ hba->vops->config_scaling_param(hba, profile, data);
+}
+
extern struct ufs_pm_lvl_states ufs_pm_lvl_states[];
/*
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2020-03-25 0:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-25 0:07 [PATCH v1 1/3] scsi: ufshcd: Update the set frequency to devfreq Asutosh Das
2020-03-25 0:07 ` Asutosh Das [this message]
2020-03-25 13:11 ` [PATCH v1 2/3] scsi: ufshcd: Let vendor override devfreq parameters Avri Altman
2020-03-25 0:07 ` [PATCH v1 3/3] scsi: ufs-qcom: Override " Asutosh Das
2020-03-25 13:11 ` Avri Altman
2020-03-25 13:11 ` [PATCH v1 1/3] scsi: ufshcd: Update the set frequency to devfreq Avri Altman
2020-03-25 16:32 ` Asutosh Das (asd)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=59a83a2dba7d7f2be4bd4af56267fee8d1c5bb7c.1585094538.git.asutoshd@codeaurora.org \
--to=asutoshd@codeaurora.org \
--cc=alim.akhtar@samsung.com \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bjorn.andersson@linaro.org \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=jejb@linux.ibm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stanley.chu@mediatek.com \
--cc=tomas.winkler@intel.com \
--cc=venkatg@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).