linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
To: Robin Murphy <robin.murphy@arm.com>
Cc: Jordan Crouse <jcrouse@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, Jonathan Marek <jonathan@marek.ca>,
	David Airlie <airlied@linux.ie>,
	freedreno@lists.freedesktop.org,
	Sharat Masetty <smasetty@codeaurora.org>,
	Akhil P Oommen <akhilpo@codeaurora.org>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	Sean Paul <sean@poorly.run>
Subject: Re: [PATCH] drm/msm/a6xx: Add support for using system cache on MMU500 based targets
Date: Tue, 27 Oct 2020 21:44:34 +0530	[thread overview]
Message-ID: <6775698bb9ddd14f5ac9325aa093d884@codeaurora.org> (raw)

On 2020-10-27 21:10, Robin Murphy wrote:
> On 2020-10-26 18:54, Jordan Crouse wrote:
>> This is an extension to the series [1] to enable the System Cache 
>> (LLC) for
>> Adreno a6xx targets.
>> 
>> GPU targets with an MMU-500 attached have a slightly different process 
>> for
>> enabling system cache. Use the compatible string on the IOMMU phandle
>> to see if an MMU-500 is attached and modify the programming sequence
>> accordingly.
>> 
>> [1] https://patchwork.freedesktop.org/series/83037/
>> 
>> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
>> ---
>> 
>>   drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 46 
>> +++++++++++++++++++++------
>>   drivers/gpu/drm/msm/adreno/a6xx_gpu.h |  1 +
>>   2 files changed, 37 insertions(+), 10 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c 
>> b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> index 95c98c642876..b7737732fbb6 100644
>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> @@ -1042,6 +1042,8 @@ static void a6xx_llc_deactivate(struct a6xx_gpu 
>> *a6xx_gpu)
>>     static void a6xx_llc_activate(struct a6xx_gpu *a6xx_gpu)
>>   {
>> +	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
>> +	struct msm_gpu *gpu = &adreno_gpu->base;
>>   	u32 cntl1_regval = 0;
>>     	if (IS_ERR(a6xx_gpu->llc_mmio))
>> @@ -1055,11 +1057,17 @@ static void a6xx_llc_activate(struct a6xx_gpu 
>> *a6xx_gpu)
>>   			       (gpu_scid << 15) | (gpu_scid << 20);
>>   	}
>>   +	/*
>> +	 * For targets with a MMU500, activate the slice but don't program 
>> the
>> +	 * register.  The XBL will take care of that.
>> +	 */
>>   	if (!llcc_slice_activate(a6xx_gpu->htw_llc_slice)) {
>> -		u32 gpuhtw_scid = llcc_get_slice_id(a6xx_gpu->htw_llc_slice);
>> +		if (!a6xx_gpu->have_mmu500) {
>> +			u32 gpuhtw_scid = llcc_get_slice_id(a6xx_gpu->htw_llc_slice);
>>   -		gpuhtw_scid &= 0x1f;
>> -		cntl1_regval |= FIELD_PREP(GENMASK(29, 25), gpuhtw_scid);
>> +			gpuhtw_scid &= 0x1f;
>> +			cntl1_regval |= FIELD_PREP(GENMASK(29, 25), gpuhtw_scid);
>> +		}
>>   	}
>>     	if (cntl1_regval) {
>> @@ -1067,13 +1075,20 @@ static void a6xx_llc_activate(struct a6xx_gpu 
>> *a6xx_gpu)
>>   		 * Program the slice IDs for the various GPU blocks and GPU MMU
>>   		 * pagetables
>>   		 */
>> -		a6xx_llc_write(a6xx_gpu, REG_A6XX_CX_MISC_SYSTEM_CACHE_CNTL_1, 
>> cntl1_regval);
>> -
>> -		/*
>> -		 * Program cacheability overrides to not allocate cache lines on
>> -		 * a write miss
>> -		 */
>> -		a6xx_llc_rmw(a6xx_gpu, REG_A6XX_CX_MISC_SYSTEM_CACHE_CNTL_0, 0xF, 
>> 0x03);
>> +		if (a6xx_gpu->have_mmu500)
>> +			gpu_rmw(gpu, REG_A6XX_GBIF_SCACHE_CNTL1, GENMASK(24, 0),
>> +				cntl1_regval);
>> +		else {
>> +			a6xx_llc_write(a6xx_gpu,
>> +				REG_A6XX_CX_MISC_SYSTEM_CACHE_CNTL_1, cntl1_regval);
>> +
>> +			/*
>> +			 * Program cacheability overrides to not allocate cache
>> +			 * lines on a write miss
>> +			 */
>> +			a6xx_llc_rmw(a6xx_gpu,
>> +				REG_A6XX_CX_MISC_SYSTEM_CACHE_CNTL_0, 0xF, 0x03);
>> +		}
>>   	}
>>   }
>>   @@ -1086,10 +1101,21 @@ static void a6xx_llc_slices_destroy(struct 
>> a6xx_gpu *a6xx_gpu)
>>   static void a6xx_llc_slices_init(struct platform_device *pdev,
>>   		struct a6xx_gpu *a6xx_gpu)
>>   {
>> +	struct device_node *phandle;
>> +
>>   	a6xx_gpu->llc_mmio = msm_ioremap(pdev, "cx_mem", "gpu_cx");
>>   	if (IS_ERR(a6xx_gpu->llc_mmio))
>>   		return;
>>   +	/*
>> +	 * There is a different programming path for targets with an mmu500
>> +	 * attached, so detect if that is the case
>> +	 */
>> +	phandle = of_parse_phandle(pdev->dev.of_node, "iommus", 0);
>> +	a6xx_gpu->have_mmu500 = (phandle &&
>> +		of_device_is_compatible(phandle, "arm,mmu500"));
> 
> Note that this should never match, since the compatible string defined
> by the binding is "arm,mmu-500" ;)
> 

Hawk eye ;) I will fix it in the next version when I squash
this with my series.

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation

             reply	other threads:[~2020-10-27 16:14 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-27 16:14 Sai Prakash Ranjan [this message]
  -- strict thread matches above, loose matches on Subject: below --
2020-10-26 18:54 [PATCH] drm/msm/a6xx: Add support for using system cache on MMU500 based targets Jordan Crouse
2020-10-27  7:08 ` Sai Prakash Ranjan
2020-10-27 14:39   ` Jordan Crouse
2020-10-27 16:08     ` Sai Prakash Ranjan
2020-10-27 15:40 ` Robin Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6775698bb9ddd14f5ac9325aa093d884@codeaurora.org \
    --to=saiprakash.ranjan@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=akhilpo@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jcrouse@codeaurora.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=sean@poorly.run \
    --cc=smasetty@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).