Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Gonzalez <marc.w.gonzalez@free.fr>
To: Vivek Gautam <vivek.gautam@codeaurora.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: MSM <linux-arm-msm@vger.kernel.org>,
	Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 3/4] iommu/arm-smmu: Add support to handle Qcom's wait-for-safe logic
Date: Fri, 14 Jun 2019 15:15:53 +0200
Message-ID: <6f85b50d-4ee8-d33a-37c9-72d45eb50a9d@free.fr> (raw)
In-Reply-To: <20190612071554.13573-4-vivek.gautam@codeaurora.org>

On 12/06/2019 09:15, Vivek Gautam wrote:

> This change is inspired by the downstream change from Patrick Daly
> to address performance issues with display and camera by handling
> this wait-for-safe within separte io-pagetable ops to do TLB
> maintenance. So a big thanks to him for the change.
> 
> Without this change the UFS reads are pretty slow:
> $ time dd if=/dev/sda of=/dev/zero bs=1048576 count=10 conv=sync
> 10+0 records in
> 10+0 records out
> 10485760 bytes (10.0MB) copied, 22.394903 seconds, 457.2KB/s
> real    0m 22.39s
> user    0m 0.00s
> sys     0m 0.01s
> 
> With this change they are back to rock!
> $ time dd if=/dev/sda of=/dev/zero bs=1048576 count=300 conv=sync
> 300+0 records in
> 300+0 records out
> 314572800 bytes (300.0MB) copied, 1.030541 seconds, 291.1MB/s
> real    0m 1.03s
> user    0m 0.00s
> sys     0m 0.54s

This issue does not affect msm8998, I presume?

Nevertheless, I see much lower performance on msm8998:

# dd if=/dev/sde of=/dev/null bs=1M status=progress
3892314112 bytes (3.9 GB, 3.6 GiB) copied, 50.0042 s, 77.8 MB/s

80 MB/s on msm8998 -- vs -- 300 MB/s on sdm845

Do you have the interconnect patches on sdm845 that allow boosting
the clock/bandwidth for specific HW blocks?

Regards.

  parent reply index

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-12  7:15 [PATCH v3 0/4] Qcom smmu-500 wait-for-safe handling for sdm845 Vivek Gautam
2019-06-12  7:15 ` [PATCH v3 1/4] firmware: qcom_scm-64: Add atomic version of qcom_scm_call Vivek Gautam
2019-06-18 17:55   ` Will Deacon
2019-06-19 11:34     ` Vivek Gautam
2019-08-05 22:27       ` Bjorn Andersson
2019-08-08 11:35         ` Vivek Gautam
2019-08-08 16:30           ` Will Deacon
2019-06-12  7:15 ` [PATCH v3 2/4] firmware/qcom_scm: Add scm call to handle smmu errata Vivek Gautam
2019-06-12  7:15 ` [PATCH v3 3/4] iommu/arm-smmu: Add support to handle Qcom's wait-for-safe logic Vivek Gautam
2019-06-14  4:05   ` Bjorn Andersson
2019-06-14  9:18     ` Vivek Gautam
2019-06-18 17:52       ` Will Deacon
2019-06-24 10:28         ` Vivek Gautam
2019-06-24 17:03           ` Will Deacon
2019-06-25  7:04             ` Vivek Gautam
2019-06-25 13:39               ` Will Deacon
2019-06-26  6:33                 ` Vivek Gautam
2019-06-26 14:48                   ` Will Deacon
2019-06-27  7:05                     ` Vivek Gautam
2019-06-14 13:15   ` Marc Gonzalez [this message]
2019-06-17  9:50     ` Vivek Gautam
2019-06-17 10:48       ` Marc Gonzalez
2019-06-12  7:15 ` [PATCH v3 4/4] arm64: dts/sdm845: Enable FW implemented safe sequence handler on MTP Vivek Gautam
2019-06-14  4:06   ` Bjorn Andersson
2019-06-14  9:01     ` Vivek Gautam
2019-08-05 22:26   ` Bjorn Andersson
2019-08-11 16:08     ` Vivek Gautam
2019-08-11 19:01       ` Bjorn Andersson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6f85b50d-4ee8-d33a-37c9-72d45eb50a9d@free.fr \
    --to=marc.w.gonzalez@free.fr \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=vivek.gautam@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox