linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: abhinavk@codeaurora.org
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Jonathan Marek <jonathan@marek.ca>,
	Stephen Boyd <sboyd@kernel.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	"open list:DRM DRIVER FOR MSM ADRENO GPU" 
	<linux-arm-msm@vger.kernel.org>,
	"open list:DRM DRIVER FOR MSM ADRENO GPU" 
	<dri-devel@lists.freedesktop.org>,
	freedreno <freedreno@lists.freedesktop.org>
Subject: Re: [Freedreno] [PATCH 2/2] drm/msm/hdmi: switch to drm_bridge_connector
Date: Mon, 18 Oct 2021 16:54:07 -0700	[thread overview]
Message-ID: <7cffbdf36f1da12976c4fb142bd4a331@codeaurora.org> (raw)
In-Reply-To: <CAA8EJpo1zsK9hVbN63DkdMHXk2gqq48v1cQ0gw_Lg7KtF130pQ@mail.gmail.com>

On 2021-10-16 07:21, Dmitry Baryshkov wrote:
> On Sat, 16 Oct 2021 at 01:25, <abhinavk@codeaurora.org> wrote:
>> 
>> Hi Dmitry
>> 
>> On 2021-10-14 17:11, Dmitry Baryshkov wrote:
>> > Merge old hdmi_bridge and hdmi_connector implementations. Use
>> > drm_bridge_connector instead.
>> >
>> Can you please comment on the validation done on this change?
>> Has basic bootup been verified on db820c as thats the only platform
>> which shall use this.
> 
> Yes, this has been developed and validated on db820c
Thanks for confirming.
> 
>> 
>> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>> > ---
>> >  drivers/gpu/drm/msm/Makefile                  |   2 +-
>> >  drivers/gpu/drm/msm/hdmi/hdmi.c               |  12 +-
>> >  drivers/gpu/drm/msm/hdmi/hdmi.h               |  19 ++-
>> >  drivers/gpu/drm/msm/hdmi/hdmi_bridge.c        |  81 ++++++++-
>> >  .../msm/hdmi/{hdmi_connector.c => hdmi_hpd.c} | 154 ++----------------
>> >  5 files changed, 109 insertions(+), 159 deletions(-)
>> >  rename drivers/gpu/drm/msm/hdmi/{hdmi_connector.c => hdmi_hpd.c} (62%)
>> >
>> > diff --git a/drivers/gpu/drm/msm/Makefile
>> > b/drivers/gpu/drm/msm/Makefile
>> > index 904535eda0c4..91b09cda8a9c 100644
>> > --- a/drivers/gpu/drm/msm/Makefile
>> > +++ b/drivers/gpu/drm/msm/Makefile
>> > @@ -19,7 +19,7 @@ msm-y := \
>> >       hdmi/hdmi.o \
>> >       hdmi/hdmi_audio.o \
>> >       hdmi/hdmi_bridge.o \
>> > -     hdmi/hdmi_connector.o \
>> > +     hdmi/hdmi_hpd.o \
>> >       hdmi/hdmi_i2c.o \
>> >       hdmi/hdmi_phy.o \
>> >       hdmi/hdmi_phy_8960.o \
>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c
>> > b/drivers/gpu/drm/msm/hdmi/hdmi.c
>> > index db17a000d968..d1cf4df7188c 100644
>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi.c
>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
>> > @@ -8,6 +8,8 @@
>> >  #include <linux/of_irq.h>
>> >  #include <linux/of_gpio.h>
>> >
>> > +#include <drm/drm_bridge_connector.h>
>> > +
>> >  #include <sound/hdmi-codec.h>
>> >  #include "hdmi.h"
>> >
>> > @@ -41,7 +43,7 @@ static irqreturn_t msm_hdmi_irq(int irq, void
>> > *dev_id)
>> >       struct hdmi *hdmi = dev_id;
>> >
>> >       /* Process HPD: */
>> > -     msm_hdmi_connector_irq(hdmi->connector);
>> > +     msm_hdmi_hpd_irq(hdmi->bridge);
>> >
>> >       /* Process DDC: */
>> >       msm_hdmi_i2c_irq(hdmi->i2c);
>> > @@ -283,7 +285,7 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
>> >               goto fail;
>> >       }
>> >
>> > -     hdmi->connector = msm_hdmi_connector_init(hdmi);
>> > +     hdmi->connector = drm_bridge_connector_init(hdmi->dev, encoder);
>> >       if (IS_ERR(hdmi->connector)) {
>> >               ret = PTR_ERR(hdmi->connector);
>> >               DRM_DEV_ERROR(dev->dev, "failed to create HDMI connector: %d\n",
>> > ret);
>> > @@ -291,6 +293,8 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
>> >               goto fail;
>> >       }
>> >
>> > +     drm_connector_attach_encoder(hdmi->connector, hdmi->encoder);
>> > +
>> >       hdmi->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
>> >       if (hdmi->irq < 0) {
>> >               ret = hdmi->irq;
>> > @@ -307,7 +311,9 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
>> >               goto fail;
>> >       }
>> >
>> > -     ret = msm_hdmi_hpd_enable(hdmi->connector);
>> > +     drm_bridge_connector_enable_hpd(hdmi->connector);
>> > +
>> > +     ret = msm_hdmi_hpd_enable(hdmi->bridge);
>> >       if (ret < 0) {
>> >               DRM_DEV_ERROR(&hdmi->pdev->dev, "failed to enable HPD: %d\n", ret);
>> >               goto fail;
>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h
>> > b/drivers/gpu/drm/msm/hdmi/hdmi.h
>> > index 82261078c6b1..736f348befb3 100644
>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi.h
>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
>> > @@ -114,6 +114,13 @@ struct hdmi_platform_config {
>> >       struct hdmi_gpio_data gpios[HDMI_MAX_NUM_GPIO];
>> >  };
>> >
>> > +struct hdmi_bridge {
>> > +     struct drm_bridge base;
>> > +     struct hdmi *hdmi;
>> > +     struct work_struct hpd_work;
>> > +};
>> > +#define to_hdmi_bridge(x) container_of(x, struct hdmi_bridge, base)
>> > +
>> >  void msm_hdmi_set_mode(struct hdmi *hdmi, bool power_on);
>> >
>> >  static inline void hdmi_write(struct hdmi *hdmi, u32 reg, u32 data)
>> > @@ -230,13 +237,11 @@ void msm_hdmi_audio_set_sample_rate(struct hdmi
>> > *hdmi, int rate);
>> >  struct drm_bridge *msm_hdmi_bridge_init(struct hdmi *hdmi);
>> >  void msm_hdmi_bridge_destroy(struct drm_bridge *bridge);
>> >
>> > -/*
>> > - * hdmi connector:
>> > - */
>> > -
>> > -void msm_hdmi_connector_irq(struct drm_connector *connector);
>> > -struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi);
>> > -int msm_hdmi_hpd_enable(struct drm_connector *connector);
>> > +void msm_hdmi_hpd_irq(struct drm_bridge *bridge);
>> > +enum drm_connector_status msm_hdmi_bridge_detect(
>> > +             struct drm_bridge *bridge);
>> > +int msm_hdmi_hpd_enable(struct drm_bridge *bridge);
>> > +void msm_hdmi_hpd_disable(struct hdmi_bridge *hdmi_bridge);
>> >
>> >  /*
>> >   * i2c adapter for ddc:
>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
>> > b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
>> > index f04eb4a70f0d..211b73dddf65 100644
>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
>> > @@ -5,17 +5,16 @@
>> >   */
>> >
>> >  #include <linux/delay.h>
>> > +#include <drm/drm_bridge_connector.h>
>> >
>> > +#include "msm_kms.h"
>> >  #include "hdmi.h"
>> >
>> > -struct hdmi_bridge {
>> > -     struct drm_bridge base;
>> > -     struct hdmi *hdmi;
>> > -};
>> > -#define to_hdmi_bridge(x) container_of(x, struct hdmi_bridge, base)
>> > -
>> >  void msm_hdmi_bridge_destroy(struct drm_bridge *bridge)
>> >  {
>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>> > +
>> > +     msm_hdmi_hpd_disable(hdmi_bridge);
>> >  }
>> >
>> >  static void msm_hdmi_power_on(struct drm_bridge *bridge)
>> > @@ -251,14 +250,76 @@ static void msm_hdmi_bridge_mode_set(struct
>> > drm_bridge *bridge,
>> >               msm_hdmi_audio_update(hdmi);
>> >  }
>> >
>> > +static struct edid *msm_hdmi_bridge_get_edid(struct drm_bridge
>> > *bridge,
>> > +             struct drm_connector *connector)
>> > +{
>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>> > +     struct edid *edid;
>> > +     uint32_t hdmi_ctrl;
>> > +
>> > +     hdmi_ctrl = hdmi_read(hdmi, REG_HDMI_CTRL);
>> > +     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl | HDMI_CTRL_ENABLE);
>> > +
>> > +     edid = drm_get_edid(connector, hdmi->i2c);
>> > +
>> > +     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl);
>> > +
>> > +     hdmi->hdmi_mode = drm_detect_hdmi_monitor(edid);
>> > +
>> > +     return edid;
>> > +}
>> > +
>> > +static enum drm_mode_status msm_hdmi_bridge_mode_valid(struct
>> > drm_bridge *bridge,
>> > +             const struct drm_display_info *info,
>> > +             const struct drm_display_mode *mode)
>> > +{
>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>> > +     const struct hdmi_platform_config *config = hdmi->config;
>> > +     struct msm_drm_private *priv = bridge->dev->dev_private;
>> > +     struct msm_kms *kms = priv->kms;
>> > +     long actual, requested;
>> > +
>> > +     requested = 1000 * mode->clock;
>> > +     actual = kms->funcs->round_pixclk(kms,
>> > +                     requested, hdmi_bridge->hdmi->encoder);
>> > +
>> > +     /* for mdp5/apq8074, we manage our own pixel clk (as opposed to
>> > +      * mdp4/dtv stuff where pixel clk is assigned to mdp/encoder
>> > +      * instead):
>> > +      */
>> > +     if (config->pwr_clk_cnt > 0)
>> > +             actual = clk_round_rate(hdmi->pwr_clks[0], actual);
>> > +
>> > +     DBG("requested=%ld, actual=%ld", requested, actual);
>> > +
>> > +     if (actual != requested)
>> > +             return MODE_CLOCK_RANGE;
>> > +
>> > +     return 0;
>> > +}
>> > +
>> >  static const struct drm_bridge_funcs msm_hdmi_bridge_funcs = {
>> >               .pre_enable = msm_hdmi_bridge_pre_enable,
>> >               .enable = msm_hdmi_bridge_enable,
>> >               .disable = msm_hdmi_bridge_disable,
>> >               .post_disable = msm_hdmi_bridge_post_disable,
>> >               .mode_set = msm_hdmi_bridge_mode_set,
>> > +             .mode_valid = msm_hdmi_bridge_mode_valid,
>> > +             .get_edid = msm_hdmi_bridge_get_edid,
>> > +             .detect = msm_hdmi_bridge_detect,
>> >  };
>> >
>> > +static void
>> > +msm_hdmi_hotplug_work(struct work_struct *work)
>> > +{
>> > +     struct hdmi_bridge *hdmi_bridge =
>> > +             container_of(work, struct hdmi_bridge, hpd_work);
>> > +     struct drm_bridge *bridge = &hdmi_bridge->base;
>> > +
>> > +     drm_bridge_hpd_notify(bridge, drm_bridge_detect(bridge));
>> > +}
>> >
>> >  /* initialize bridge */
>> >  struct drm_bridge *msm_hdmi_bridge_init(struct hdmi *hdmi)
>> > @@ -275,11 +336,17 @@ struct drm_bridge *msm_hdmi_bridge_init(struct
>> > hdmi *hdmi)
>> >       }
>> >
>> >       hdmi_bridge->hdmi = hdmi;
>> > +     INIT_WORK(&hdmi_bridge->hpd_work, msm_hdmi_hotplug_work);
>> >
>> >       bridge = &hdmi_bridge->base;
>> >       bridge->funcs = &msm_hdmi_bridge_funcs;
>> > +     bridge->ddc = hdmi->i2c;
>> > +     bridge->type = DRM_MODE_CONNECTOR_HDMIA;
>> > +     bridge->ops = DRM_BRIDGE_OP_HPD |
>> > +             DRM_BRIDGE_OP_DETECT |
>> > +             DRM_BRIDGE_OP_EDID;
Please correct me if wrong here. When we set DRM_BRIDGE_OP_HPD, it means 
we need to
set the hpd_enable and hpd_disable callbacks. I am not seeing those 
being set.

707 	 * @DRM_BRIDGE_OP_HPD: The bridge can detect hot-plug and 
hot-unplug
708 	 * without requiring polling. Bridges that set this flag shall
709 	 * implement the &drm_bridge_funcs->hpd_enable and
710 	 * &drm_bridge_funcs->hpd_disable callbacks if they support 
enabling
711 	 * and disabling hot-plug detection dynamically.
712 	 */
713 	DRM_BRIDGE_OP_HPD = BIT(2),

So when drm_bridge_connector_enable_hpd() is called, its a no-op as 
hpd_enable() callback
is not set.

msm_hdmi_hpd_enable() actually enables the HPD logic which is getting 
called from msm_hdmi_modeset_init()
and not from hpd_enable().

In that case, do we need to set DRM_BRIDGE_OP_HPD for this? If we dont, 
what will happen?



>> >
>> > -     ret = drm_bridge_attach(hdmi->encoder, bridge, NULL, 0);
>> > +     ret = drm_bridge_attach(hdmi->encoder, bridge, NULL,
>> > DRM_BRIDGE_ATTACH_NO_CONNECTOR);
>> >       if (ret)
>> >               goto fail;
>> >
>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
>> > b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
>> > similarity index 62%
>> > rename from drivers/gpu/drm/msm/hdmi/hdmi_connector.c
>> > rename to drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
>> > index a7f729cdec7b..1cda7bf23b3b 100644
>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
>> > @@ -11,13 +11,6 @@
>> >  #include "msm_kms.h"
>> >  #include "hdmi.h"
>> >
>> > -struct hdmi_connector {
>> > -     struct drm_connector base;
>> > -     struct hdmi *hdmi;
>> > -     struct work_struct hpd_work;
>> > -};
>> > -#define to_hdmi_connector(x) container_of(x, struct hdmi_connector,
>> > base)
>> > -
>> >  static void msm_hdmi_phy_reset(struct hdmi *hdmi)
>> >  {
>> >       unsigned int val;
>> > @@ -139,10 +132,10 @@ static void enable_hpd_clocks(struct hdmi *hdmi,
>> > bool enable)
>> >       }
>> >  }
>> >
>> > -int msm_hdmi_hpd_enable(struct drm_connector *connector)
>> > +int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
>> >  {
>> > -     struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>> >       const struct hdmi_platform_config *config = hdmi->config;
>> >       struct device *dev = &hdmi->pdev->dev;
>> >       uint32_t hpd_ctrl;
>> > @@ -199,9 +192,9 @@ int msm_hdmi_hpd_enable(struct drm_connector
>> > *connector)
>> >       return ret;
>> >  }
>> >
>> > -static void hdp_disable(struct hdmi_connector *hdmi_connector)
>> > +void msm_hdmi_hpd_disable(struct hdmi_bridge *hdmi_bridge)
>> >  {
>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>> >       const struct hdmi_platform_config *config = hdmi->config;
>> >       struct device *dev = &hdmi->pdev->dev;
>> >       int ret;
>> > @@ -227,19 +220,10 @@ static void hdp_disable(struct hdmi_connector
>> > *hdmi_connector)
>> >               dev_warn(dev, "failed to disable hpd regulator: %d\n", ret);
>> >  }
>> >
>> > -static void
>> > -msm_hdmi_hotplug_work(struct work_struct *work)
>> > -{
>> > -     struct hdmi_connector *hdmi_connector =
>> > -             container_of(work, struct hdmi_connector, hpd_work);
>> > -     struct drm_connector *connector = &hdmi_connector->base;
>> > -     drm_helper_hpd_irq_event(connector->dev);
>> > -}
>> > -
>> > -void msm_hdmi_connector_irq(struct drm_connector *connector)
>> > +void msm_hdmi_hpd_irq(struct drm_bridge *bridge)
>> >  {
>> > -     struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>> >       uint32_t hpd_int_status, hpd_int_ctrl;
>> >
>> >       /* Process HPD: */
>> > @@ -262,7 +246,7 @@ void msm_hdmi_connector_irq(struct drm_connector
>> > *connector)
>> >                       hpd_int_ctrl |= HDMI_HPD_INT_CTRL_INT_CONNECT;
>> >               hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL, hpd_int_ctrl);
>> >
>> > -             queue_work(hdmi->workq, &hdmi_connector->hpd_work);
>> > +             queue_work(hdmi->workq, &hdmi_bridge->hpd_work);
>> >       }
>> >  }
>> >
>> > @@ -293,11 +277,11 @@ static enum drm_connector_status
>> > detect_gpio(struct hdmi *hdmi)
>> >                       connector_status_disconnected;
>> >  }
>> >
>> > -static enum drm_connector_status hdmi_connector_detect(
>> > -             struct drm_connector *connector, bool force)
>> > +enum drm_connector_status msm_hdmi_bridge_detect(
>> > +             struct drm_bridge *bridge)
>> >  {
>> > -     struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>> >       const struct hdmi_platform_config *config = hdmi->config;
>> >       struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];
>> >       enum drm_connector_status stat_gpio, stat_reg;
>> > @@ -331,115 +315,3 @@ static enum drm_connector_status
>> > hdmi_connector_detect(
>> >
>> >       return stat_gpio;
>> >  }
>> > -
>> > -static void hdmi_connector_destroy(struct drm_connector *connector)
>> > -{
>> > -     struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
>> > -
>> > -     hdp_disable(hdmi_connector);
>> > -
>> > -     drm_connector_cleanup(connector);
>> > -
>> > -     kfree(hdmi_connector);
>> > -}
>> > -
>> > -static int msm_hdmi_connector_get_modes(struct drm_connector
>> > *connector)
>> > -{
>> > -     struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>> > -     struct edid *edid;
>> > -     uint32_t hdmi_ctrl;
>> > -     int ret = 0;
>> > -
>> > -     hdmi_ctrl = hdmi_read(hdmi, REG_HDMI_CTRL);
>> > -     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl | HDMI_CTRL_ENABLE);
>> > -
>> > -     edid = drm_get_edid(connector, hdmi->i2c);
>> > -
>> > -     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl);
>> > -
>> > -     hdmi->hdmi_mode = drm_detect_hdmi_monitor(edid);
>> > -     drm_connector_update_edid_property(connector, edid);
>> > -
>> > -     if (edid) {
>> > -             ret = drm_add_edid_modes(connector, edid);
>> > -             kfree(edid);
>> > -     }
>> > -
>> > -     return ret;
>> > -}
>> > -
>> > -static int msm_hdmi_connector_mode_valid(struct drm_connector
>> > *connector,
>> > -                              struct drm_display_mode *mode)
>> > -{
>> > -     struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>> > -     const struct hdmi_platform_config *config = hdmi->config;
>> > -     struct msm_drm_private *priv = connector->dev->dev_private;
>> > -     struct msm_kms *kms = priv->kms;
>> > -     long actual, requested;
>> > -
>> > -     requested = 1000 * mode->clock;
>> > -     actual = kms->funcs->round_pixclk(kms,
>> > -                     requested, hdmi_connector->hdmi->encoder);
>> > -
>> > -     /* for mdp5/apq8074, we manage our own pixel clk (as opposed to
>> > -      * mdp4/dtv stuff where pixel clk is assigned to mdp/encoder
>> > -      * instead):
>> > -      */
>> > -     if (config->pwr_clk_cnt > 0)
>> > -             actual = clk_round_rate(hdmi->pwr_clks[0], actual);
>> > -
>> > -     DBG("requested=%ld, actual=%ld", requested, actual);
>> > -
>> > -     if (actual != requested)
>> > -             return MODE_CLOCK_RANGE;
>> > -
>> > -     return 0;
>> > -}
>> > -
>> > -static const struct drm_connector_funcs hdmi_connector_funcs = {
>> > -     .detect = hdmi_connector_detect,
>> > -     .fill_modes = drm_helper_probe_single_connector_modes,
>> > -     .destroy = hdmi_connector_destroy,
>> > -     .reset = drm_atomic_helper_connector_reset,
>> > -     .atomic_duplicate_state =
>> > drm_atomic_helper_connector_duplicate_state,
>> > -     .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> > -};
>> > -
>> > -static const struct drm_connector_helper_funcs
>> > msm_hdmi_connector_helper_funcs = {
>> > -     .get_modes = msm_hdmi_connector_get_modes,
>> > -     .mode_valid = msm_hdmi_connector_mode_valid,
>> > -};
>> > -
>> > -/* initialize connector */
>> > -struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi)
>> > -{
>> > -     struct drm_connector *connector = NULL;
>> > -     struct hdmi_connector *hdmi_connector;
>> > -
>> > -     hdmi_connector = kzalloc(sizeof(*hdmi_connector), GFP_KERNEL);
>> > -     if (!hdmi_connector)
>> > -             return ERR_PTR(-ENOMEM);
>> > -
>> > -     hdmi_connector->hdmi = hdmi;
>> > -     INIT_WORK(&hdmi_connector->hpd_work, msm_hdmi_hotplug_work);
>> > -
>> > -     connector = &hdmi_connector->base;
>> > -
>> > -     drm_connector_init_with_ddc(hdmi->dev, connector,
>> > -                                 &hdmi_connector_funcs,
>> > -                                 DRM_MODE_CONNECTOR_HDMIA,
>> > -                                 hdmi->i2c);
>> > -     drm_connector_helper_add(connector,
>> > &msm_hdmi_connector_helper_funcs);
>> > -
>> > -     connector->polled = DRM_CONNECTOR_POLL_CONNECT |
>> > -                     DRM_CONNECTOR_POLL_DISCONNECT;
>> > -
>> > -     connector->interlace_allowed = 0;
>> > -     connector->doublescan_allowed = 0;
>> > -
>> > -     drm_connector_attach_encoder(connector, hdmi->encoder);
>> > -
>> > -     return connector;
>> > -}

  reply	other threads:[~2021-10-18 23:54 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-15  0:10 [PATCH 1/2] drm/msm/hdmi: use bulk regulator API Dmitry Baryshkov
2021-10-15  0:11 ` [PATCH 2/2] drm/msm/hdmi: switch to drm_bridge_connector Dmitry Baryshkov
2021-10-15 22:25   ` [Freedreno] " abhinavk
2021-10-16 14:21     ` Dmitry Baryshkov
2021-10-18 23:54       ` abhinavk [this message]
2021-11-25 12:50         ` Dmitry Baryshkov
2021-12-06 20:42           ` Abhinav Kumar
2021-12-06 22:47             ` Dmitry Baryshkov
2021-12-06 22:58               ` Abhinav Kumar
2021-12-07  0:21                 ` Dmitry Baryshkov
2021-12-07  0:26                   ` Abhinav Kumar
2021-10-15 19:46 ` [PATCH 1/2] drm/msm/hdmi: use bulk regulator API Stephen Boyd
2021-10-15 22:16 ` [Freedreno] " abhinavk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7cffbdf36f1da12976c4fb142bd4a331@codeaurora.org \
    --to=abhinavk@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=sboyd@kernel.org \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).