* [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes
@ 2021-04-08 16:21 Caleb Connolly
2021-04-14 8:14 ` Felipe Balbi
0 siblings, 1 reply; 3+ messages in thread
From: Caleb Connolly @ 2021-04-08 16:21 UTC (permalink / raw)
To: caleb, Andy Gross, Bjorn Andersson, Rob Herring
Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm,
Vinod Koul, Bhupesh Sharma, devicetree, linux-kernel
Tested on the OnePlus 7 Pro (including DMA).
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 521 +++++++++++++++++++++++++++
1 file changed, 521 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 543417d74216..7207a3689d9d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -588,6 +588,111 @@ qupv3_id_0: geniqup@8c0000 {
#size-cells = <2>;
ranges;
status = "disabled";
+
+ i2c0: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00898000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@89c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0089c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c7_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
};
qupv3_id_1: geniqup@ac0000 {
@@ -602,6 +707,58 @@ qupv3_id_1: geniqup@ac0000 {
ranges;
status = "disabled";
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c9_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c11_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart2: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
@@ -610,6 +767,32 @@ uart2: serial@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c12_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c16: i2c@94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0094000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c16_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
qupv3_id_2: geniqup@cc0000 {
@@ -624,6 +807,84 @@ qupv3_id_2: geniqup@cc0000 {
#size-cells = <2>;
ranges;
status = "disabled";
+
+ i2c17: i2c@c80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c17_default>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c18: i2c@c84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c18_default>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c19: i2c@c88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c19_default>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c13: i2c@c8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c13_default>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c14: i2c@c90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c14_default>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@c94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c94000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c15_default>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
config_noc: interconnect@1500000 {
@@ -947,6 +1208,266 @@ tlmm: pinctrl@3100000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ qup_i2c0_default: qup-i2c0-default {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "qup0";
+ };
+
+ config {
+ pins = "gpio0", "gpio1";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c1_default: qup-i2c1-default {
+ mux {
+ pins = "gpio114", "gpio115";
+ function = "qup1";
+ };
+
+ config {
+ pins = "gpio114", "gpio115";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c2_default: qup-i2c2-default {
+ mux {
+ pins = "gpio126", "gpio127";
+ function = "qup2";
+ };
+
+ config {
+ pins = "gpio126", "gpio127";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c3_default: qup-i2c3-default {
+ mux {
+ pins = "gpio144", "gpio145";
+ function = "qup3";
+ };
+
+ config {
+ pins = "gpio144", "gpio145";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c4_default: qup-i2c4-default {
+ mux {
+ pins = "gpio51", "gpio52";
+ function = "qup4";
+ };
+
+ config {
+ pins = "gpio51", "gpio52";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c5_default: qup-i2c5-default {
+ mux {
+ pins = "gpio121", "gpio122";
+ function = "qup5";
+ };
+
+ config {
+ pins = "gpio121", "gpio122";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c6_default: qup-i2c6-default {
+ mux {
+ pins = "gpio6", "gpio7";
+ function = "qup6";
+ };
+
+ config {
+ pins = "gpio6", "gpio7";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c7_default: qup-i2c7-default {
+ mux {
+ pins = "gpio98", "gpio99";
+ function = "qup7";
+ };
+
+ config {
+ pins = "gpio98", "gpio99";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c8_default: qup-i2c8-default {
+ mux {
+ pins = "gpio88", "gpio89";
+ function = "qup8";
+ };
+
+ config {
+ pins = "gpio88", "gpio89";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c9_default: qup-i2c9-default {
+ mux {
+ pins = "gpio39", "gpio40";
+ function = "qup9";
+ };
+
+ config {
+ pins = "gpio39", "gpio40";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c10_default: qup-i2c10-default {
+ mux {
+ pins = "gpio9", "gpio10";
+ function = "qup10";
+ };
+
+ config {
+ pins = "gpio9", "gpio10";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c11_default: qup-i2c11-default {
+ mux {
+ pins = "gpio94", "gpio95";
+ function = "qup11";
+ };
+
+ config {
+ pins = "gpio94", "gpio95";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c12_default: qup-i2c12-default {
+ mux {
+ pins = "gpio83", "gpio84";
+ function = "qup12";
+ };
+
+ config {
+ pins = "gpio83", "gpio84";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c13_default: qup-i2c13-default {
+ mux {
+ pins = "gpio43", "gpio44";
+ function = "qup13";
+ };
+
+ config {
+ pins = "gpio43", "gpio44";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c14_default: qup-i2c14-default {
+ mux {
+ pins = "gpio47", "gpio48";
+ function = "qup14";
+ };
+
+ config {
+ pins = "gpio47", "gpio48";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c15_default: qup-i2c15-default {
+ mux {
+ pins = "gpio27", "gpio28";
+ function = "qup15";
+ };
+
+ config {
+ pins = "gpio27", "gpio28";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c16_default: qup-i2c16-default {
+ mux {
+ pins = "gpio86", "gpio85";
+ function = "qup16";
+ };
+
+ config {
+ pins = "gpio86", "gpio85";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c17_default: qup-i2c17-default {
+ mux {
+ pins = "gpio55", "gpio56";
+ function = "qup17";
+ };
+
+ config {
+ pins = "gpio55", "gpio56";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c18_default: qup-i2c18-default {
+ mux {
+ pins = "gpio23", "gpio24";
+ function = "qup18";
+ };
+
+ config {
+ pins = "gpio23", "gpio24";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c19_default: qup-i2c19-default {
+ mux {
+ pins = "gpio57", "gpio58";
+ function = "qup19";
+ };
+
+ config {
+ pins = "gpio57", "gpio58";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
};
remoteproc_mpss: remoteproc@4080000 {
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes
2021-04-08 16:21 [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly
@ 2021-04-14 8:14 ` Felipe Balbi
0 siblings, 0 replies; 3+ messages in thread
From: Felipe Balbi @ 2021-04-14 8:14 UTC (permalink / raw)
To: Caleb Connolly, caleb, Andy Gross, Bjorn Andersson, Rob Herring
Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm,
Vinod Koul, Bhupesh Sharma, devicetree, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 384 bytes --]
Caleb Connolly <caleb@connolly.tech> writes:
> Tested on the OnePlus 7 Pro (including DMA).
>
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> Reviewed-by: Vinod Koul <vkoul@kernel.org>
> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Tested on Microsoft Surface Duo (DTS will be sent after -rc1)
Tested-by: Felipe Balbi <balbi@kernel.org>
--
balbi
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 857 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes
2021-03-21 17:46 (No Subject) Caleb Connolly
@ 2021-03-21 17:46 ` Caleb Connolly
0 siblings, 0 replies; 3+ messages in thread
From: Caleb Connolly @ 2021-03-21 17:46 UTC (permalink / raw)
To: caleb, Andy Gross, Bjorn Andersson, Rob Herring
Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm,
Vinod Koul, Bhupesh Sharma, devicetree, linux-kernel
Tested on the OnePlus 7 Pro (including DMA).
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 521 +++++++++++++++++++++++++++
1 file changed, 521 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 543417d74216..7207a3689d9d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -588,6 +588,111 @@ qupv3_id_0: geniqup@8c0000 {
#size-cells = <2>;
ranges;
status = "disabled";
+
+ i2c0: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00898000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@89c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0089c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c7_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
};
qupv3_id_1: geniqup@ac0000 {
@@ -602,6 +707,58 @@ qupv3_id_1: geniqup@ac0000 {
ranges;
status = "disabled";
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c9_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c11_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart2: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
@@ -610,6 +767,32 @@ uart2: serial@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c12_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c16: i2c@94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0094000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c16_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
qupv3_id_2: geniqup@cc0000 {
@@ -624,6 +807,84 @@ qupv3_id_2: geniqup@cc0000 {
#size-cells = <2>;
ranges;
status = "disabled";
+
+ i2c17: i2c@c80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c17_default>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c18: i2c@c84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c18_default>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c19: i2c@c88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c19_default>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c13: i2c@c8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c13_default>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c14: i2c@c90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c14_default>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@c94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c94000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c15_default>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
config_noc: interconnect@1500000 {
@@ -947,6 +1208,266 @@ tlmm: pinctrl@3100000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ qup_i2c0_default: qup-i2c0-default {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "qup0";
+ };
+
+ config {
+ pins = "gpio0", "gpio1";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c1_default: qup-i2c1-default {
+ mux {
+ pins = "gpio114", "gpio115";
+ function = "qup1";
+ };
+
+ config {
+ pins = "gpio114", "gpio115";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c2_default: qup-i2c2-default {
+ mux {
+ pins = "gpio126", "gpio127";
+ function = "qup2";
+ };
+
+ config {
+ pins = "gpio126", "gpio127";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c3_default: qup-i2c3-default {
+ mux {
+ pins = "gpio144", "gpio145";
+ function = "qup3";
+ };
+
+ config {
+ pins = "gpio144", "gpio145";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c4_default: qup-i2c4-default {
+ mux {
+ pins = "gpio51", "gpio52";
+ function = "qup4";
+ };
+
+ config {
+ pins = "gpio51", "gpio52";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c5_default: qup-i2c5-default {
+ mux {
+ pins = "gpio121", "gpio122";
+ function = "qup5";
+ };
+
+ config {
+ pins = "gpio121", "gpio122";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c6_default: qup-i2c6-default {
+ mux {
+ pins = "gpio6", "gpio7";
+ function = "qup6";
+ };
+
+ config {
+ pins = "gpio6", "gpio7";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c7_default: qup-i2c7-default {
+ mux {
+ pins = "gpio98", "gpio99";
+ function = "qup7";
+ };
+
+ config {
+ pins = "gpio98", "gpio99";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c8_default: qup-i2c8-default {
+ mux {
+ pins = "gpio88", "gpio89";
+ function = "qup8";
+ };
+
+ config {
+ pins = "gpio88", "gpio89";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c9_default: qup-i2c9-default {
+ mux {
+ pins = "gpio39", "gpio40";
+ function = "qup9";
+ };
+
+ config {
+ pins = "gpio39", "gpio40";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c10_default: qup-i2c10-default {
+ mux {
+ pins = "gpio9", "gpio10";
+ function = "qup10";
+ };
+
+ config {
+ pins = "gpio9", "gpio10";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c11_default: qup-i2c11-default {
+ mux {
+ pins = "gpio94", "gpio95";
+ function = "qup11";
+ };
+
+ config {
+ pins = "gpio94", "gpio95";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c12_default: qup-i2c12-default {
+ mux {
+ pins = "gpio83", "gpio84";
+ function = "qup12";
+ };
+
+ config {
+ pins = "gpio83", "gpio84";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c13_default: qup-i2c13-default {
+ mux {
+ pins = "gpio43", "gpio44";
+ function = "qup13";
+ };
+
+ config {
+ pins = "gpio43", "gpio44";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c14_default: qup-i2c14-default {
+ mux {
+ pins = "gpio47", "gpio48";
+ function = "qup14";
+ };
+
+ config {
+ pins = "gpio47", "gpio48";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c15_default: qup-i2c15-default {
+ mux {
+ pins = "gpio27", "gpio28";
+ function = "qup15";
+ };
+
+ config {
+ pins = "gpio27", "gpio28";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c16_default: qup-i2c16-default {
+ mux {
+ pins = "gpio86", "gpio85";
+ function = "qup16";
+ };
+
+ config {
+ pins = "gpio86", "gpio85";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c17_default: qup-i2c17-default {
+ mux {
+ pins = "gpio55", "gpio56";
+ function = "qup17";
+ };
+
+ config {
+ pins = "gpio55", "gpio56";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c18_default: qup-i2c18-default {
+ mux {
+ pins = "gpio23", "gpio24";
+ function = "qup18";
+ };
+
+ config {
+ pins = "gpio23", "gpio24";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c19_default: qup-i2c19-default {
+ mux {
+ pins = "gpio57", "gpio58";
+ function = "qup19";
+ };
+
+ config {
+ pins = "gpio57", "gpio58";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
};
remoteproc_mpss: remoteproc@4080000 {
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-04-14 8:14 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-08 16:21 [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly
2021-04-14 8:14 ` Felipe Balbi
-- strict thread matches above, loose matches on Subject: below --
2021-03-21 17:46 (No Subject) Caleb Connolly
2021-03-21 17:46 ` [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).