Hi all, This patch series converts the Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller Device Tree binding documentation to json-schema, after fixing a few issues in DTS files. Thanks for your comments! Geert Uytterhoeven (5): ARM: dts: i.MX51: digi-connectcore-som: Correct Ethernet node name ARM: dts: imx53-ard: Correct Ethernet node name ARM: dts: qcom-apq8060: Correct Ethernet node name and drop bogus irq property MIPS: SEAD3: Correct Ethernet node name dt-bindings: net: sms911x: Convert to json-schema .../devicetree/bindings/net/gpmc-eth.txt | 2 +- .../devicetree/bindings/net/smsc,lan9115.yaml | 107 ++++++++++++++++++ .../devicetree/bindings/net/smsc911x.txt | 43 ------- .../boot/dts/imx51-digi-connectcore-som.dtsi | 2 +- arch/arm/boot/dts/imx53-ard.dts | 2 +- .../arm/boot/dts/qcom-apq8060-dragonboard.dts | 4 +- arch/mips/boot/dts/mti/sead3.dts | 2 +- 7 files changed, 112 insertions(+), 50 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/smsc,lan9115.yaml delete mode 100644 Documentation/devicetree/bindings/net/smsc911x.txt -- 2.25.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
make dtbs_check: lan9221@5,0: $nodename:0: 'lan9221@5,0' does not match '^ethernet(@.*)?$' Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 16addb3a2a1b4ee6..7d4970417dce8fd7 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -206,7 +206,7 @@ &weim { pinctrl-0 = <&pinctrl_weim>; status = "okay"; - lan9221: lan9221@5,0 { + lan9221: ethernet@5,0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lan9221>; compatible = "smsc,lan9221", "smsc,lan9115"; -- 2.25.1
make dtbs_check: lan9220@f4000000: $nodename:0: 'lan9220@f4000000' does not match '^ethernet(@.*)?$' Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/imx53-ard.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 9a2e1fde712879ea..6208fbb2e74104fb 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -24,7 +24,7 @@ eim-cs1@f4000000 { reg = <0xf4000000 0x3ff0000>; ranges; - lan9220@f4000000 { + ethernet@f4000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0xf4000000 0x2000000>; phy-mode = "mii"; -- 2.25.1
make dtbs_check: ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$' ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+' There is no "smsc,irq-active-low" property, as active low is the default. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index dace8ffeb99118cb..0a4ffd10c48464f5 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -581,7 +581,7 @@ external-bus@1a100000 { * EBI2. This has a 25MHz chrystal next to it, so no * clocking is needed. */ - ethernet-ebi2@2,0 { + ethernet@2,0 { compatible = "smsc,lan9221", "smsc,lan9115"; reg = <2 0x0 0x100>; /* @@ -598,8 +598,6 @@ ethernet-ebi2@2,0 { phy-mode = "mii"; reg-io-width = <2>; smsc,force-external-phy; - /* IRQ on edge falling = active low */ - smsc,irq-active-low; smsc,irq-push-pull; /* -- 2.25.1
make dtbs_check: eth@1f010000: $nodename:0: 'eth@1f010000' does not match '^ethernet(@.*)?$' Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/mips/boot/dts/mti/sead3.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts index 1cf6728af8fee1b6..046c97a297103fbf 100644 --- a/arch/mips/boot/dts/mti/sead3.dts +++ b/arch/mips/boot/dts/mti/sead3.dts @@ -244,7 +244,7 @@ uart1: uart@1f000800 { no-loopback-test; }; - eth@1f010000 { + ethernet@1f010000 { compatible = "smsc,lan9115"; reg = <0x1f010000 0x10000>; reg-io-width = <4>; -- 2.25.1
Convert the Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller Device Tree binding documentation to json-schema. Document missing properties. Make "phy-mode" not required, as many DTS files do not have it, and the Linux drivers falls back to PHY_INTERFACE_MODE_NA. Correct nodename in example. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- I have listed Shawn as the maintainer, as he wrote the original bindings. Shawn: Please scream if this is inappropriate ;-) I left "additionalProperties: true", as there are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*", "gpmc,*", ...) to be found, that actually depend on the compatible value of the parent node. --- .../devicetree/bindings/net/gpmc-eth.txt | 2 +- .../devicetree/bindings/net/smsc,lan9115.yaml | 107 ++++++++++++++++++ .../devicetree/bindings/net/smsc911x.txt | 43 ------- 3 files changed, 108 insertions(+), 44 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/smsc,lan9115.yaml delete mode 100644 Documentation/devicetree/bindings/net/smsc911x.txt diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt index f7da3d73ca1b2e15..32821066a85b0078 100644 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt @@ -13,7 +13,7 @@ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt For the properties relevant to the ethernet controller connected to the GPMC refer to the binding documentation of the device. For example, the documentation -for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt +for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml Child nodes need to specify the GPMC bus address width using the "bank-width" property but is possible that an ethernet controller also has a property to diff --git a/Documentation/devicetree/bindings/net/smsc,lan9115.yaml b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml new file mode 100644 index 0000000000000000..294fa3edf966695a --- /dev/null +++ b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/smsc,lan9115.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + oneOf: + - const: smsc,lan9115 + - items: + - enum: + - "smsc,lan89218" + - "smsc,lan9117" + - "smsc,lan9118" + - "smsc,lan9220" + - "smsc,lan9221" + - const: smsc,lan9115 + + reg: + maxItems: 1 + + reg-shift: true + + reg-io-width: + enum: [ 2, 4 ] + default: 2 + + interrupts: + minItems: 1 + items: + - description: + LAN interrupt line + - description: + Optional PME (power management event) interrupt that is able to wake + up the host system with a 50ms pulse on network activity + + clocks: + maxItems: 1 + + phy-mode: true + + smsc,irq-active-high: + type: boolean + description: Indicates the IRQ polarity is active-high + + smsc,irq-push-pull: + type: boolean + description: Indicates the IRQ type is push-pull + + smsc,force-internal-phy: + type: boolean + description: Forces SMSC LAN controller to use internal PHY + + smsc,force-external-phy: + type: boolean + description: Forces SMSC LAN controller to use external PHY + + smsc,save-mac-address: + type: boolean + description: + Indicates that MAC address needs to be saved before resetting the + controller + + reset-gpios: + maxItems: 1 + description: + A GPIO line connected to the RESET (active low) signal of the device. + On many systems this is wired high so the device goes out of reset at + power-on, but if it is under program control, this optional GPIO can + wake up in response to it. + + vdd33a-supply: + description: 3.3V analog power supply + + vddvario-supply: + description: IO logic power supply + +required: + - compatible + - reg + - interrupts + +additionalProperties: true + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + ethernet@f4000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0xf4000000 0x2000000>; + phy-mode = "mii"; + interrupt-parent = <&gpio1>; + interrupts = <31>, <32>; + reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + reg-io-width = <4>; + smsc,irq-push-pull; + }; diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt deleted file mode 100644 index acfafc8e143c4c85..0000000000000000 --- a/Documentation/devicetree/bindings/net/smsc911x.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller - -Required properties: -- compatible : Should be "smsc,lan<model>", "smsc,lan9115" -- reg : Address and length of the io space for SMSC LAN -- interrupts : one or two interrupt specifiers - - The first interrupt is the SMSC LAN interrupt line - - The second interrupt (if present) is the PME (power - management event) interrupt that is able to wake up the host - system with a 50ms pulse on network activity -- phy-mode : See ethernet.txt file in the same directory - -Optional properties: -- reg-shift : Specify the quantity to shift the register offsets by -- reg-io-width : Specify the size (in bytes) of the IO accesses that - should be performed on the device. Valid value for SMSC LAN is - 2 or 4. If it's omitted or invalid, the size would be 2. -- smsc,irq-active-high : Indicates the IRQ polarity is active-high -- smsc,irq-push-pull : Indicates the IRQ type is push-pull -- smsc,force-internal-phy : Forces SMSC LAN controller to use - internal PHY -- smsc,force-external-phy : Forces SMSC LAN controller to use - external PHY -- smsc,save-mac-address : Indicates that mac address needs to be saved - before resetting the controller -- reset-gpios : a GPIO line connected to the RESET (active low) signal - of the device. On many systems this is wired high so the device goes - out of reset at power-on, but if it is under program control, this - optional GPIO can wake up in response to it. -- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies - -Examples: - -lan9220@f4000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0xf4000000 0x2000000>; - phy-mode = "mii"; - interrupt-parent = <&gpio1>; - interrupts = <31>, <32>; - reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - reg-io-width = <4>; - smsc,irq-push-pull; -}; -- 2.25.1
On Thu, May 20, 2021 at 03:58:38PM +0200, Geert Uytterhoeven wrote:
> make dtbs_check:
>
> eth@1f010000: $nodename:0: 'eth@1f010000' does not match '^ethernet(@.*)?$'
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> arch/mips/boot/dts/mti/sead3.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]
On Thu, May 20, 2021 at 03:58:39PM +0200, Geert Uytterhoeven wrote: > Convert the Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x > Controller Device Tree binding documentation to json-schema. > > Document missing properties. > Make "phy-mode" not required, as many DTS files do not have it, and the > Linux drivers falls back to PHY_INTERFACE_MODE_NA. > Correct nodename in example. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > I have listed Shawn as the maintainer, as he wrote the original > bindings. Shawn: Please scream if this is inappropriate ;-) > > I left "additionalProperties: true", as there are lots of bus-specific > properties ("qcom,*", "samsung,*", "fsl,*", "gpmc,*", ...) to be found, > that actually depend on the compatible value of the parent node. Can you put a comment above additionalProperties to that effect. I need to come up with some solution for this, but don't want folks copying that when normally not needed. > > --- > .../devicetree/bindings/net/gpmc-eth.txt | 2 +- > .../devicetree/bindings/net/smsc,lan9115.yaml | 107 ++++++++++++++++++ > .../devicetree/bindings/net/smsc911x.txt | 43 ------- > 3 files changed, 108 insertions(+), 44 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/smsc,lan9115.yaml > delete mode 100644 Documentation/devicetree/bindings/net/smsc911x.txt > > diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt > index f7da3d73ca1b2e15..32821066a85b0078 100644 > --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt > +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt > @@ -13,7 +13,7 @@ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt > > For the properties relevant to the ethernet controller connected to the GPMC > refer to the binding documentation of the device. For example, the documentation > -for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt > +for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml > > Child nodes need to specify the GPMC bus address width using the "bank-width" > property but is possible that an ethernet controller also has a property to > diff --git a/Documentation/devicetree/bindings/net/smsc,lan9115.yaml b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml > new file mode 100644 > index 0000000000000000..294fa3edf966695a > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml > @@ -0,0 +1,107 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/smsc,lan9115.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller > + > +maintainers: > + - Shawn Guo <shawnguo@kernel.org> > + > +allOf: > + - $ref: ethernet-controller.yaml# > + > +properties: > + compatible: > + oneOf: > + - const: smsc,lan9115 > + - items: > + - enum: > + - "smsc,lan89218" > + - "smsc,lan9117" > + - "smsc,lan9118" > + - "smsc,lan9220" > + - "smsc,lan9221" Don't need quotes. > + - const: smsc,lan9115 > + > + reg: > + maxItems: 1 > + > + reg-shift: true > + > + reg-io-width: > + enum: [ 2, 4 ] > + default: 2 > + > + interrupts: > + minItems: 1 > + items: > + - description: > + LAN interrupt line > + - description: > + Optional PME (power management event) interrupt that is able to wake > + up the host system with a 50ms pulse on network activity > + > + clocks: > + maxItems: 1 > + > + phy-mode: true > + > + smsc,irq-active-high: > + type: boolean > + description: Indicates the IRQ polarity is active-high > + > + smsc,irq-push-pull: > + type: boolean > + description: Indicates the IRQ type is push-pull > + > + smsc,force-internal-phy: > + type: boolean > + description: Forces SMSC LAN controller to use internal PHY > + > + smsc,force-external-phy: > + type: boolean > + description: Forces SMSC LAN controller to use external PHY > + > + smsc,save-mac-address: > + type: boolean > + description: > + Indicates that MAC address needs to be saved before resetting the > + controller > + > + reset-gpios: > + maxItems: 1 > + description: > + A GPIO line connected to the RESET (active low) signal of the device. > + On many systems this is wired high so the device goes out of reset at > + power-on, but if it is under program control, this optional GPIO can > + wake up in response to it. > + > + vdd33a-supply: > + description: 3.3V analog power supply > + > + vddvario-supply: > + description: IO logic power supply > + > +required: > + - compatible > + - reg > + - interrupts > + > +additionalProperties: true > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + ethernet@f4000000 { > + compatible = "smsc,lan9220", "smsc,lan9115"; > + reg = <0xf4000000 0x2000000>; > + phy-mode = "mii"; > + interrupt-parent = <&gpio1>; > + interrupts = <31>, <32>; > + reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; > + reg-io-width = <4>; > + smsc,irq-push-pull; > + }; > diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt > deleted file mode 100644 > index acfafc8e143c4c85..0000000000000000 > --- a/Documentation/devicetree/bindings/net/smsc911x.txt > +++ /dev/null > @@ -1,43 +0,0 @@ > -* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller > - > -Required properties: > -- compatible : Should be "smsc,lan<model>", "smsc,lan9115" > -- reg : Address and length of the io space for SMSC LAN > -- interrupts : one or two interrupt specifiers > - - The first interrupt is the SMSC LAN interrupt line > - - The second interrupt (if present) is the PME (power > - management event) interrupt that is able to wake up the host > - system with a 50ms pulse on network activity > -- phy-mode : See ethernet.txt file in the same directory > - > -Optional properties: > -- reg-shift : Specify the quantity to shift the register offsets by > -- reg-io-width : Specify the size (in bytes) of the IO accesses that > - should be performed on the device. Valid value for SMSC LAN is > - 2 or 4. If it's omitted or invalid, the size would be 2. > -- smsc,irq-active-high : Indicates the IRQ polarity is active-high > -- smsc,irq-push-pull : Indicates the IRQ type is push-pull > -- smsc,force-internal-phy : Forces SMSC LAN controller to use > - internal PHY > -- smsc,force-external-phy : Forces SMSC LAN controller to use > - external PHY > -- smsc,save-mac-address : Indicates that mac address needs to be saved > - before resetting the controller > -- reset-gpios : a GPIO line connected to the RESET (active low) signal > - of the device. On many systems this is wired high so the device goes > - out of reset at power-on, but if it is under program control, this > - optional GPIO can wake up in response to it. > -- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies > - > -Examples: > - > -lan9220@f4000000 { > - compatible = "smsc,lan9220", "smsc,lan9115"; > - reg = <0xf4000000 0x2000000>; > - phy-mode = "mii"; > - interrupt-parent = <&gpio1>; > - interrupts = <31>, <32>; > - reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; > - reg-io-width = <4>; > - smsc,irq-push-pull; > -}; > -- > 2.25.1 >
On Thu, May 20, 2021 at 3:58 PM Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
> make dtbs_check:
>
> ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$'
> ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+'
>
> There is no "smsc,irq-active-low" property, as active low is the
> default.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
I think Bjorn Andersson has to apply this patch.
Yours,
Linus Walleij
On Thu, May 20, 2021 at 03:58:35PM +0200, Geert Uytterhoeven wrote:
> make dtbs_check:
>
> lan9221@5,0: $nodename:0: 'lan9221@5,0' does not match '^ethernet(@.*)?$'
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Applied, thanks.
On Thu, May 20, 2021 at 03:58:36PM +0200, Geert Uytterhoeven wrote:
> make dtbs_check:
>
> lan9220@f4000000: $nodename:0: 'lan9220@f4000000' does not match '^ethernet(@.*)?$'
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Applied, thanks.
Hi Thomas,
On Thu, May 20, 2021 at 5:08 PM Thomas Bogendoerfer
<tsbogend@alpha.franken.de> wrote:
> On Thu, May 20, 2021 at 03:58:38PM +0200, Geert Uytterhoeven wrote:
> > make dtbs_check:
> >
> > eth@1f010000: $nodename:0: 'eth@1f010000' does not match '^ethernet(@.*)?$'
> >
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> > ---
> > arch/mips/boot/dts/mti/sead3.dts | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Can you please take this through the MIPS tree?
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
On Thu, May 27, 2021 at 11:44:27AM +0200, Geert Uytterhoeven wrote:
> Hi Thomas,
>
> On Thu, May 20, 2021 at 5:08 PM Thomas Bogendoerfer
> <tsbogend@alpha.franken.de> wrote:
> > On Thu, May 20, 2021 at 03:58:38PM +0200, Geert Uytterhoeven wrote:
> > > make dtbs_check:
> > >
> > > eth@1f010000: $nodename:0: 'eth@1f010000' does not match '^ethernet(@.*)?$'
> > >
> > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> > > ---
> > > arch/mips/boot/dts/mti/sead3.dts | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
>
> Can you please take this through the MIPS tree?
sure, applied now.
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]