From: Marc Gonzalez <marc.w.gonzalez@free.fr>
To: Paolo Pisati <p.pisati@gmail.com>
Cc: MSM <linux-arm-msm@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Niklas Cassel <niklas.cassel@linaro.org>,
Stanimir Varbanov <svarbanov@mm-sol.com>,
Vivek Gautam <vivek.gautam@codeaurora.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: Re: msm8996: qcom-qmp: apq8096-db820c fails to boot, reset back to fastboot and locks up
Date: Thu, 13 Jun 2019 11:19:28 +0200 [thread overview]
Message-ID: <8cc440fd-9fd2-97a6-42e1-0a0b9c456d10@free.fr> (raw)
In-Reply-To: <20190610134401.GA12964@harukaze>
On 10/06/2019 15:44, Paolo Pisati wrote:
> From time to time, my apq8096-db820c fails to boot to userspace, reset back to
> fastboot and locks up: to easily reproduce the issue, i'm boot looping using a
> cron job with a 1 min reboot entry on the board while leaving a "while 1; do
> fastboot boot boot.img; done" on the host pc.
>
> The issue is present in mainline up to 5.2-rc4, using defconfig and:
>
> CONFIG_SCSI_UFS_QCOM=y
> CONFIG_PHY_QCOM_QMP=y
> CONFIG_PHY_QCOM_UFS=y
>
> but was present in previous releases too (e.g. 4.14., 4.19, etc qcom-lt or
> mainline), where it's even easier to reproduce (e.g. takes way less reboots to
> trigger it).
>
> These are the last lines printed out:
> ...
> [ 7.407209] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy
> [ 7.448058] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy
> [ 7.461859] ufs_qcom_phy_qmp_14nm 627000.phy: invalid resource
> [ 7.535434] qcom-qmp-phy 34000.phy: phy common block init timed-out
> [ 7.538596] phy phy-34000.phy.0: phy init failed --> -110
> [ 7.550891] qcom-pcie: probe of 600000.pcie failed with error -110
> [ 7.619008] qcom-pcie 608000.pcie: 608000.pcie supply vddpe-3v3 not found,
> using dummy regulator
>
> Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
> S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301
> S - IMAGE_VARIANT_STRING=M8996LAB
> S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68
> S - Boot Interface: UFS
> S - Secure Boot: Off
> ...
>
> Full boot here: https://pastebin.ubuntu.com/p/rtjVrD3yzk/
>
> Any idea what is going on? Am i doing something wrong?
Hmmm... this might be related to:
https://patchwork.kernel.org/patch/10976217/
Regards.
prev parent reply other threads:[~2019-06-13 15:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-10 13:44 msm8996: qcom-qmp: apq8096-db820c fails to boot, reset back to fastboot and locks up Paolo Pisati
2019-06-11 17:12 ` Niklas Cassel
2019-06-12 13:17 ` Niklas Cassel
2019-06-12 14:09 ` Paolo Pisati
2019-06-12 16:20 ` Niklas Cassel
2019-06-13 8:57 ` Paolo Pisati
2019-06-13 9:19 ` Marc Gonzalez [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8cc440fd-9fd2-97a6-42e1-0a0b9c456d10@free.fr \
--to=marc.w.gonzalez@free.fr \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=niklas.cassel@linaro.org \
--cc=p.pisati@gmail.com \
--cc=srinivas.kandagatla@linaro.org \
--cc=svarbanov@mm-sol.com \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).