From: Sibi Sankar <sibis@codeaurora.org>
To: Jonathan Marek <jonathan@marek.ca>
Cc: linux-arm-msm@vger.kernel.org, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-kernel-owner@vger.kernel.org
Subject: Re: [PATCH v3 6/7] arm64: dts: qcom: sm8150: add interconnect nodes
Date: Tue, 28 Jul 2020 17:25:13 +0530 [thread overview]
Message-ID: <8eaf4f2df727390963ffe13c29712c2c@codeaurora.org> (raw)
In-Reply-To: <20200728023811.5607-7-jonathan@marek.ca>
On 2020-07-28 08:08, Jonathan Marek wrote:
> Add the interconnect dts nodes for sm8150.
>
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 82 ++++++++++++++++++++++++++++
> 1 file changed, 82 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 33ff99132f4f..e4689c27224b 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -11,6 +11,7 @@
> #include <dt-bindings/clock/qcom,rpmh.h>
> #include <dt-bindings/clock/qcom,gcc-sm8150.h>
> #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
> +#include <dt-bindings/interconnect/qcom,sm8150.h>
> #include <dt-bindings/thermal/thermal.h>
>
> / {
> @@ -440,6 +441,55 @@ uart2: serial@a90000 {
> };
> };
>
> + config_noc: interconnect@1500000 {
> + compatible = "qcom,sm8150-config-noc";
> + reg = <0 0x01500000 0 0x7400>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + system_noc: interconnect@1620000 {
> + compatible = "qcom,sm8150-system-noc";
> + reg = <0 0x01620000 0 0x19400>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + mc_virt: interconnect@163a000 {
> + compatible = "qcom,sm8150-mc-virt";
> + reg = <0 0x0163a000 0 0x1000>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + aggre1_noc: interconnect@16e0000 {
> + compatible = "qcom,sm8150-aggre1-noc";
> + reg = <0 0x016e0000 0 0xd080>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + aggre2_noc: interconnect@1700000 {
> + compatible = "qcom,sm8150-aggre2-noc";
> + reg = <0 0x01700000 0 0x20000>;
Though aggre2_noc might need a
larger space in the future lets
lands ^^ for now.
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + compute_noc: interconnect@1720000 {
> + compatible = "qcom,sm8150-compute-noc";
> + reg = <0 0x01720000 0 0x7000>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + mmss_noc: interconnect@1740000 {
> + compatible = "qcom,sm8150-mmss-noc";
> + reg = <0 0x01740000 0 0x1c100>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> ufs_mem_hc: ufshc@1d84000 {
> compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
> "jedec,ufs-2.0";
> @@ -510,6 +560,13 @@ ufs_mem_phy_lanes: lanes@1d87400 {
> };
> };
>
> + ipa_virt: interconnect@1e00000 {
> + compatible = "qcom,sm8150-ipa-virt";
> + reg = <0 0x01e00000 0 0x1000>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> tcsr_mutex_regs: syscon@1f40000 {
> compatible = "syscon";
> reg = <0x0 0x01f40000 0x0 0x40000>;
> @@ -860,6 +917,20 @@ usb_2_ssphy: lane@88eb200 {
> };
> };
>
> + dc_noc: interconnect@9160000 {
> + compatible = "qcom,sm8150-dc-noc";
> + reg = <0 0x09160000 0 0x3200>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + gem_noc: interconnect@9680000 {
> + compatible = "qcom,sm8150-gem-noc";
> + reg = <0 0x09680000 0 0x3e200>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> usb_1: usb@a6f8800 {
> compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
> reg = <0 0x0a6f8800 0 0x400>;
> @@ -950,6 +1021,13 @@ usb_2_dwc3: dwc3@a800000 {
> };
> };
>
> + camnoc_virt: interconnect@ac00000 {
> + compatible = "qcom,sm8150-camnoc-virt";
> + reg = <0 0x0ac00000 0 0x1000>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> aoss_qmp: power-controller@c300000 {
> compatible = "qcom,sm8150-aoss-qmp";
> reg = <0x0 0x0c300000 0x0 0x100000>;
> @@ -1280,6 +1358,10 @@ rpmhpd_opp_turbo_l1: opp11 {
> };
> };
> };
> +
> + apps_bcm_voter: bcm_voter {
> + compatible = "qcom,bcm-voter";
> + };
> };
>
> cpufreq_hw: cpufreq@18323000 {
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2020-07-28 11:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-28 2:37 [PATCH v3 0/7] Add SM8150 and SM8250 interconnect drivers Jonathan Marek
2020-07-28 2:38 ` [PATCH v3 1/7] dt-bindings: interconnect: single yaml file for RPMh " Jonathan Marek
2020-07-28 11:25 ` Sibi Sankar
2020-07-31 20:47 ` Rob Herring
2020-07-28 2:38 ` [PATCH v3 2/7] dt-bindings: interconnect: Add Qualcomm SM8150 DT bindings Jonathan Marek
2020-07-28 11:26 ` Sibi Sankar
2020-07-28 2:38 ` [PATCH v3 3/7] dt-bindings: interconnect: Add Qualcomm SM8250 " Jonathan Marek
2020-07-28 11:28 ` Sibi Sankar
2020-07-28 2:38 ` [PATCH v3 4/7] interconnect: qcom: Add SM8150 interconnect provider driver Jonathan Marek
2020-07-28 11:30 ` Sibi Sankar
2020-07-28 2:38 ` [PATCH v3 5/7] interconnect: qcom: Add SM8250 " Jonathan Marek
2020-07-28 11:31 ` Sibi Sankar
2020-07-28 2:38 ` [PATCH v3 6/7] arm64: dts: qcom: sm8150: add interconnect nodes Jonathan Marek
2020-07-28 11:55 ` Sibi Sankar [this message]
2020-07-28 2:38 ` [PATCH v3 7/7] arm64: dts: qcom: sm8250: " Jonathan Marek
2020-07-28 12:02 ` Sibi Sankar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8eaf4f2df727390963ffe13c29712c2c@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathan@marek.ca \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel-owner@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).