linux-arm-msm.vger.kernel.org archive mirror

 messages from 2018-05-12 02:28:06 to 2018-05-16 21:20:33 UTC [more...]

[PATCH v2 0/2] Fix UFS and devfreq interaction
 2018-05-16 21:20 UTC  (3+ messages)
` [PATCH v2 2/2] scsi: ufs: Use freq table with devfreq

[PATCH v2 01/10] scsi: ufs: Allowing power mode change
 2018-05-16 21:14 UTC  (18+ messages)
` [PATCH v2 02/10] scsi: ufs-qcom: Enable UFSHCD_QUIRK_BROKEN_PWR_MODE_CHANGE quirk
` [PATCH v2 03/10] scsi: ufs: Add LCC quirk for host and device
` [PATCH v2 04/10] scsi: ufs: fix exception event handling
` [PATCH v2 05/10] scsi: ufshcd: fix possible unclocked register access
` [PATCH v2 06/10] scsi: ufs: add reference counting for scsi block requests
` [PATCH v2 07/10] scsi: ufs-qcom: remove broken hci version quirk
` [PATCH v2 08/10] scsi: ufs: make sure all interrupts are processed
` [PATCH v2 10/10] scsi: ufs: Add clock ungating to a separate workqueue

[PATCH v4] pinctrl: msm: fix gpio-hog related boot issues
 2018-05-16 20:29 UTC  (5+ messages)

[RFC PATCH] efi/fb: Convert PCI bus address to resource if translated by the bridge
 2018-05-16 18:41 UTC  (4+ messages)

[PATCH v6 0/2] SDM845 System Cache Driver
 2018-05-16 18:08 UTC  (5+ messages)
` [PATCH v6 1/2] dt-bindings: Documentation for qcom, llcc

[PATCH v7 0/2] SDM845 System Cache Driver
 2018-05-16 17:43 UTC  (3+ messages)
` [PATCH v7 1/2] dt-bindings: Documentation for qcom, llcc
` [PATCH v7 2/2] drivers: soc: Add LLCC driver

[PATCH 0/2] slimbus: Add QCOM SLIMBus NGD driver
 2018-05-16 16:51 UTC  (3+ messages)
` [PATCH 1/2] slimbus: ngd: dt-bindings: Add slim ngd dt bindings
` [PATCH 2/2] slimbus: ngd: Add qcom SLIMBus NGD driver

[PATCH v6 0/4] Add suppport for sn65dsi86 bridge chip and Innolux 2k edp panel
 2018-05-16 16:27 UTC  (8+ messages)
  ` [PATCH v6 1/4] drm/bridge: add support for sn65dsi86 bridge driver
  ` [PATCH v6 2/4] dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings
  ` [PATCH v6 3/4] drm/panel: add Innolux TV123WAM panel driver support
  ` [PATCH v6 4/4] dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings

[PATCH v7 00/14] CPU scaling support for msm8996
 2018-05-16 14:13 UTC  (28+ messages)
` [PATCH v7 01/14] soc: qcom: Separate kryo l2 accessors from PMU driver
` [PATCH v7 02/14] clk: qcom: Make clk_alpha_pll_configure available to modules
` [PATCH v7 03/14] clk: qcom: Add CPU clock driver for msm8996
` [PATCH v7 04/14] clk: qcom: Add DT bindings for "
` [PATCH v7 05/14] clk: qcom: cpu-8996: Add support to switch to alternate PLL
` [PATCH v7 06/14] clk: qcom: cpu-8996: Add support to switch below 600Mhz
` [PATCH v7 07/14] clk: qcom: Add ACD path to CPU clock driver for msm8996
` [PATCH v7 08/14] dt: qcom: Add opp and thermal to the msm8996
` [PATCH v7 09/14] regulator: qcom_spmi: Add support for SAW
` [PATCH v7 10/14] dt-bindings: qcom_spmi: Add support for SAW documentation
` [PATCH v7 11/14] dt: qcom: Add SAW regulator for 8x96 CPUs
` [PATCH v7 12/14] cpufreq: Add Kryo CPU scaling driver
` [PATCH v7 13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu
` [PATCH v7 14/14] dt: qcom: Add qcom-cpufreq-kryo driver configuration

[PATCH v2 0/1] Add gpio-line-names property for Dragonboard820c
 2018-05-16 14:10 UTC  (3+ messages)
` [PATCH v2 1/1] dts: qcom: db820c: Add gpio-line-names property

[PATCH 1/2] drm/msm: call drm_atomic_helper_suspend() and drm_atomic_helper_resume()
 2018-05-16 13:39 UTC  (2+ messages)
` [PATCH 2/2] drm/msm/adreno: Add power management functions for system sleep

[RESEND PATCH] pinctrl: qcom: fix wrong pull status display for no_keeper SoC
 2018-05-16 12:52 UTC  (2+ messages)

[PATCH V6 00/12] ARM: dts: ipq: updates to enable a few peripherals
 2018-05-16 12:50 UTC  (13+ messages)
` [PATCH V6 01/12] ARM: dts: ipq4019: Add a default chosen node
` [PATCH V6 02/12] ARM: dts: ipq4019: Add a few peripheral nodes
` [PATCH V6 03/12] ARM: dts: ipq4019: Change the max opp frequency
` [PATCH V6 04/12] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
` [PATCH V6 05/12] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
` [PATCH V6 06/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 "
` [PATCH V6 07/12] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
` [PATCH V6 08/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
` [PATCH V6 09/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 "
` [PATCH V6 10/12] ARM: dts: ipq8074: Add peripheral nodes
` [PATCH V6 11/12] ARM: dts: ipq8074: Add pcie nodes
` [PATCH V6 12/12] ARM: dts: ipq8074: Enable few peripherals for hk01 board

[PATCH v3 00/26] device link, bridge supplier <-> drm device
 2018-05-16 10:15 UTC  (6+ messages)
  ` [PATCH v3 01/26] drm/bridge: allow optionally specifying an owner .odev device
  ` [PATCH v3 21/26] drm/msm: specify the owner .odev of the bridges
  ` [PATCH v3 24/26] drm/bridge: remove the .of_node member
  ` [PATCH v3 25/26] drm/bridge: require the owner .odev to be filled in on drm_bridge_add/attach
  ` [PATCH v3 26/26] drm/bridge: establish a link between the bridge supplier and consumer

[PATCH RFC] mmc: sdhci: Don't get card-detect without preemption
 2018-05-16  9:50 UTC  (2+ messages)

[PATCH v2 00/26] device link, bridge supplier <-> drm device
 2018-05-16  9:31 UTC  (8+ messages)
  ` [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer

[PATCH v2 0/2] i2c: make use of i2c_8bit_addr_from_msg
 2018-05-16  7:33 UTC  (4+ messages)
` [PATCH v2 1/2] i2c: algos: "
` [PATCH v2 2/2] i2c: busses: "

[PATCH v8 00/10] drivers/qcom: add RPMH communication support
 2018-05-15 19:52 UTC  (13+ messages)
` [PATCH v8 04/10] drivers: qcom: rpmh: add RPMH helper functions
` [PATCH v8 09/10] drivers: qcom: rpmh: add support for batch RPMH request

[PATCH] clk: qcom: Add some missing gcc clks for msm8996
 2018-05-15 18:05 UTC  (2+ messages)

[PATCH V3] Input: pm8941-pwrkey: add resin key capabilities
 2018-05-15 17:20 UTC  (4+ messages)

[PATCH v2 00/29] Venus updates
 2018-05-15  9:40 UTC  (33+ messages)
` [PATCH v2 01/29] venus: hfi_msgs: correct pointer increment
` [PATCH v2 02/29] venus: hfi: preparation to support venus 4xx
` [PATCH v2 03/29] venus: hfi: update sequence event to handle more properties
` [PATCH v2 04/29] venus: hfi_cmds: add set_properties for 4xx version
` [PATCH v2 05/29] venus: hfi: support session continue "
` [PATCH v2 06/29] venus: hfi: handle buffer output2 type as well
` [PATCH v2 07/29] venus: hfi_venus: add halt AXI support for Venus 4xx
` [PATCH v2 08/29] venus: hfi_venus: fix suspend function for venus 3xx versions
` [PATCH v2 09/29] venus: hfi_venus: move set of default properties to core init
` [PATCH v2 10/29] venus: hfi_venus: add suspend functionality for Venus 4xx
` [PATCH v2 11/29] venus: venc,vdec: adds clocks needed for venus 4xx
` [PATCH v2 12/29] venus: add common capability parser
` [PATCH v2 13/29] venus: helpers: make a commmon function for power_enable
` [PATCH v2 14/29] venus: core: delete not used flag for buffer mode
` [PATCH v2 15/29] venus: helpers: rename a helper function and use buffer mode from caps
` [PATCH v2 16/29] venus: add a helper function to set dynamic buffer mode
` [PATCH v2 17/29] venus: add helper function to set actual buffer size
` [PATCH v2 18/29] venus: delete no longer used bufmode flag from instance
` [PATCH v2 19/29] venus: helpers: add buffer type argument to a helper
` [PATCH v2 20/29] venus: helpers: add a new helper to set raw format
` [PATCH v2 21/29] venus: helpers,vdec,venc: add helpers to set work mode and core usage
` [PATCH v2 22/29] venus: helpers: extend set_num_bufs helper with one more argument
` [PATCH v2 23/29] venus: helpers: add a helper to return opb buffer sizes
` [PATCH v2 24/29] venus: vdec: get required input buffers as well
` [PATCH v2 25/29] venus: vdec: new function for output configuration
` [PATCH v2 26/29] venus: move frame size calculations in common place
` [PATCH v2 27/29] venus: implementing multi-stream support
` [PATCH v2 28/29] venus: add sdm845 compatible and resource data
` [PATCH v2 29/29] venus: add HEVC codec support

[PATCH v8 00/24] ASoC: qcom: Add support to QDSP based Audio
 2018-05-15  8:00 UTC  (5+ messages)
` [PATCH v8 08/24] ASoC: qdsp6: q6core: Add q6core driver
` [PATCH v8 23/24] ASoC: qcom: apq8096: Add db820c machine driver

[PATCH] thermal: qcom: tsens: Allow number of sensors to come from DT
 2018-05-15  6:57 UTC  (4+ messages)

[PATCH v5 0/4] Add suppport for sn65dsi86 bridge chip and Innolux 2k edp panel
 2018-05-15  5:50 UTC  (7+ messages)
` [PATCH v5 1/4] drm/bridge: add support for sn65dsi86 bridge driver
` [PATCH v5 3/4] drm/panel: add Innolux TV123WAM panel driver support

[PATCH V1 0/5] backlight: qcom-wled: Support for QCOM wled driver
 2018-05-15  4:55 UTC  (9+ messages)
` [PATCH V1 2/5] backlight: qcom-wled: Add support for WLED4 peripheral
` [PATCH V1 5/5] backlight: qcom-wled: Add auto string detection logic

[PATCH v2] arm64: dts: qcom: sdm845: Sort nodes in the reserved mem by address
 2018-05-15  4:43 UTC 

[PATCH] arm64: dts: qcom: sdm845: Sort nodes in the reserved mem by address
 2018-05-15  4:37 UTC 

[PATCH v6 00/14] CPU scaling support for msm8996
 2018-05-15  4:11 UTC  (20+ messages)
` [PATCH v6 01/14] soc: qcom: Separate kryo l2 accessors from PMU driver
` [PATCH v6 02/14] clk: qcom: Make clk_alpha_pll_configure available to modules
` [PATCH v6 03/14] clk: qcom: Add CPU clock driver for msm8996
` [PATCH v6 04/14] clk: qcom: Add DT bindings for "
` [PATCH v6 05/14] clk: qcom: cpu-8996: Add support to switch to alternate PLL
` [PATCH v6 06/14] clk: qcom: cpu-8996: Add support to switch below 600Mhz
` [PATCH v6 07/14] clk: qcom: Add ACD path to CPU clock driver for msm8996
` [PATCH v6 08/14] dt: qcom: Add opp and thermal to the msm8996
` [PATCH v6 09/14] regulator: qcom_spmi: Add support for SAW
` [PATCH v6 10/14] dt-bindings: qcom_spmi: Add support for SAW documentation
` [PATCH v6 11/14] dt: qcom: Add SAW regulator for 8x96 CPUs
` [PATCH v6 12/14] cpufreq: Add Kryo CPU scaling driver
` [PATCH v6 13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu
` [PATCH v6 14/14] dt: qcom: Add qcom-cpufreq-kryo driver configuration

[PATCH v2] arm64: dts: qcom: sdm845: Sort nodes in the soc by address
 2018-05-15  3:59 UTC 

[PATCH v2] arm64: dts: qcom: Collapse usb support into one node
 2018-05-14 22:10 UTC  (2+ messages)

[PATCH 00/21] i2c: make use of i2c_8bit_addr_from_msg
 2018-05-14 17:01 UTC  (4+ messages)
` [PATCH 17/21] i2c: qup: "

[PATCH] dmaengine: qcom: bam_dma: check if the runtime pm enabled
 2018-05-14 16:18 UTC 

[DPU PATCH v3 00/12] Refactor DPU device/driver hierarchy and add runtime_pm support
 2018-05-14 15:26 UTC  (13+ messages)
` [DPU PATCH v3 01/12] drm/msm: remove redundant pm_runtime_enable call from msm_drv
  ` [DPU PATCH v3 02/12] drm/msm/mdp5: subclass msm_mdss for mdp5
  ` [DPU PATCH v3 03/12] drm/msm/dpu: add MDSS top level driver for dpu
  ` [DPU PATCH v3 04/12] drm/msm/dpu: create new platform driver for dpu device
  ` [DPU PATCH v3 05/12] drm/msm/dpu: update dpu sub-block offsets wrt dpu base address
  ` [DPU PATCH v3 06/12] drm/msm/dpu: use runtime_pm calls on dpu device
  ` [DPU PATCH v3 07/12] drm/msm/dpu: remove clock management code from dpu_power_handle
  ` [DPU PATCH v3 08/12] drm/msm/dpu: remove power "
  ` [DPU PATCH v3 09/12] drm/msm/dp: remove dpu_power_handle calls from dp driver
  ` [DPU PATCH v3 10/12] drm/msm/dpu: use runtime_pm calls in dpu_dbg
  ` [DPU PATCH v3 11/12] drm/msm/dpu: move dpu_power_handle to dpu folder
  ` [DPU PATCH v3 12/12] drm/msm/dpu: add error handling in dpu_core_perf_crtc_update

[PATCH v7 00/10] drivers/qcom: add RPMH communication support
 2018-05-14 15:00 UTC  (8+ messages)
` [PATCH v7 04/10] drivers: qcom: rpmh: add RPMH helper functions

[DPU PATCH v2 00/12] Refactor DPU device/driver hierarchy and add runtime_pm support
 2018-05-14 14:06 UTC  (4+ messages)
` [DPU PATCH v2 03/12] drm/msm/dpu: add MDSS top level driver for dpu

[PATCH V6 0/5] Add support for Hexagon q6v5-wcss integrated core
 2018-05-14 10:46 UTC  (6+ messages)
` [PATCH V6 1/5] remoteproc: qcom: mdt_loader: Make the firmware authentication optional
` [PATCH V6 2/5] remoteproc: qcom: Push reset ops, rproc ops in to of_match data
` [PATCH V6 3/5] remoteproc: qcom: Split the head and tail of the q5v5-pil rproc reset function
` [PATCH V6 4/5] remoteproc: qcom: Add support for q6v5-wcss pil
` [PATCH V6 5/5] remoteproc: qcom: Add q6v5-wcss rproc ops

[PATCH] remoteproc: Introduce prepare/unprepare ops for rproc coredump
 2018-05-12 14:21 UTC 

[PATCH v3 0/2] regulator: add QCOM RPMh regulator driver
 2018-05-12  2:28 UTC  (2+ messages)
` [PATCH v3 2/2] "