messages from 2018-05-30 14:49:39 to 2018-06-04 04:26:53 UTC [more...]
[PATCH 0/2] thermal: tsens: SDM845 support
2018-06-04 4:26 UTC (5+ messages)
` [PATCH 1/2] thermal: tsens: Add support for SDM845 platform
` [PATCH 2/2] tsens: Get rid of unused fields in structure
[PATCH] pci: qcom: include gpio/consumer.h
2018-06-04 1:24 UTC (2+ messages)
[PATCH] rpmsg: smd: do not use mananged resources for endpoints and channels
2018-06-04 0:49 UTC (2+ messages)
[PATCH v2] thermal: qcom: tsens: Allow number of sensors to come from DT
2018-06-02 19:38 UTC (2+ messages)
[PATCH] PCI: Add pci=safemode option
2018-06-02 17:57 UTC (9+ messages)
[PATCH] clk: qcom: Export clk_fabia_pll_configure()
2018-06-02 7:21 UTC
[PATCH V5] scsi: hpsa: disable device during shutdown
2018-06-02 4:28 UTC
[PATCH v5 0/2] regulator: add QCOM RPMh regulator driver
2018-06-02 1:34 UTC (3+ messages)
` [PATCH v5 1/2] regulator: dt-bindings: add QCOM RPMh regulator bindings
` [PATCH v5 2/2] regulator: add QCOM RPMh regulator driver
[DPU PATCH v3] Higher values of pclk can exceed 32 bits when multiplied by a factor
2018-06-02 0:30 UTC
[PATCH v2] of: platform: stop accessing invalid dev in of_platform_device_destroy
2018-06-02 0:03 UTC
[PATCH] of: platform: stop accessing invalid dev in of_platform_device_destroy
2018-06-01 23:35 UTC (2+ messages)
[PATCH] ASoC: dapm: delete dapm_kcontrol_data paths entry before freeing
2018-06-01 22:53 UTC
[PATCH v2 0/5] Venus updates - PIL
2018-06-01 22:15 UTC (11+ messages)
` [PATCH v2 1/5] media: venus: add a routine to reset ARM9
` [PATCH v2 2/5] media: venus: add a routine to set venus state
` [PATCH v2 3/5] venus: add check to make scm calls
` [PATCH v2 4/5] media: venus: add no TZ boot and shutdown routine
` [PATCH v2 5/5] venus: register separate driver for firmware device
[PATCH v4 0/2] regulator: add QCOM RPMh regulator driver
2018-06-01 21:41 UTC (20+ messages)
` [PATCH v4 1/2] regulator: dt-bindings: add QCOM RPMh regulator bindings
` [PATCH v4 2/2] regulator: add QCOM RPMh regulator driver
[PATCH V4] scsi: hpsa: drop shutdown callback
2018-06-01 20:58 UTC (3+ messages)
[DPU PATCH v2] drm/msm: make pclk_rate u64 to avoid truncation
2018-06-01 19:37 UTC (2+ messages)
[PATCH v3 2/5] efi: Add embedded peripheral firmware support
2018-06-01 19:23 UTC (4+ messages)
[PATCH] clk: qcom: gcc-msm8996: Disable halt check on UFS clocks
2018-06-01 19:22 UTC (2+ messages)
[PATCH v2 0/6] Add powerdomain driver for corners on msm8996/sdm845
2018-06-01 19:19 UTC (17+ messages)
` [PATCH v2 1/6] soc: qcom: rpmpd: Add a powerdomain driver to model corners
` [PATCH v2 5/6] soc: qcom: rpmh powerdomain driver
[PATCH v2 0/2] Add QCOM video clock controller driver
2018-06-01 19:08 UTC (5+ messages)
` [PATCH v2 1/2] dt-bindings: clock: Introduce QCOM Video clock bindings
` [PATCH v2 2/2] clk: qcom: Add video clock controller driver for SDM845
[PATCH V3] PCI: move early dump functionality from x86 arch into the common code
2018-06-01 19:00 UTC
[PATCH V2] PCI: move early dump functionality from x86 arch into the common code
2018-06-01 18:58 UTC (3+ messages)
[PATCH v5 0/7] phy: qcom: Updates for USB PHYs on SDM845
2018-06-01 18:45 UTC (3+ messages)
` [PATCH v5 1/7] clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk
[PATCH 0/7] add non-strict mode support for arm-smmu-v3
2018-06-01 17:51 UTC (17+ messages)
` [PATCH 1/7] iommu/dma: fix trival coding style mistake
` [PATCH 2/7] iommu/arm-smmu-v3: fix the implementation of flush_iotlb_all hook
` [PATCH 3/7] iommu: prepare for the non-strict mode support
` [PATCH 4/7] iommu/amd: make sure TLB to be flushed before IOVA freed
` [PATCH 5/7] iommu/dma: add support for non-strict mode
` [PATCH 6/7] iommu/io-pgtable-arm: "
` [PATCH 7/7] iommu/arm-smmu-v3: "
[DPU PATCH v4 0/6] Switch DPU to use upstream DSI driver for SDM845
2018-06-01 17:45 UTC (7+ messages)
` [DPU PATCH v4 1/6] drm/msm: remove display stream compression(DSC) support for SM845
` [DPU PATCH v4 2/6] drm/msm: remove support for ping pong split topology
` [DPU PATCH v4 3/6] drm/msm: remove panel autorefresh support for SDM845
` [DPU PATCH v4 5/6] drm/msm: hook up DPU with upstream DSI
` [DPU PATCH v4 6/6] drm/msm: remove dsi-staging driver
` [DPU PATCH v4 4/6] drm/msm: strip down custom event ioctl's
[DPU PATCH v3 0/6] Switch DPU to use upstream DSI driver for SDM845
2018-06-01 17:44 UTC (4+ messages)
` [DPU PATCH v3 5/6] drm/msm: hook up DPU with upstream DSI
[PATCH v9 00/15] Krait clocks + Krait CPUfreq
2018-06-01 17:12 UTC (9+ messages)
` [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
[RFC PATCH 0/5] Hexagon remoteproc spring cleaning
2018-06-01 16:39 UTC (11+ messages)
` [RFC PATCH 2/5] remoteproc: q6v5: Extract common resource handling
` [RFC PATCH 3/5] remoteproc: qcom: adsp: Use common q6v5 helpers
` [RFC PATCH 4/5] remoteproc: qcom: q6v5-pil: "
[PATCH v2] clk: qcom: Enable clocks which needs to be always on for SDM845
2018-06-01 16:36 UTC (2+ messages)
[PATCH] PCI: move early dump functionality from x86 arch into the common code
2018-06-01 15:24 UTC (6+ messages)
[PATCH V3 1/2] PCI: Try to clean up resources via remove if shutdown doesn't exist
2018-06-01 13:34 UTC (6+ messages)
` [PATCH V3 2/2] scsi: hpsa: drop shutdown callback
[RFC] PM / devfreq: Add support for alerts
2018-06-01 11:43 UTC (3+ messages)
[PATCH v3 0/2] slimbus: Add QCOM SLIMBus NGD driver
2018-06-01 9:11 UTC (3+ messages)
` [PATCH v3 1/2] slimbus: ngd: dt-bindings: Add slim ngd dt bindings
` [PATCH v3 2/2] slimbus: ngd: Add qcom SLIMBus NGD driver
[PATCH 0/4] Venus updates - PIL
2018-06-01 6:53 UTC (4+ messages)
` [PATCH 4/4] media: venus: add PIL support
[PATCH v2 0/2] slimbus: Add QCOM SLIMBus NGD driver
2018-06-01 5:14 UTC (5+ messages)
` [PATCH v2 1/2] slimbus: ngd: dt-bindings: Add slim ngd dt bindings
[PATCH] drm/msm: Fix NULL deref on bind/probe deferral
2018-05-31 22:40 UTC (2+ messages)
[PATCH] i2c: qup: fix building without CONFIG_ACPI
2018-05-31 21:23 UTC (3+ messages)
[PATCH] gpu: drm: msm: Change return type to vm_fault_t
2018-05-31 18:53 UTC (4+ messages)
[PATCH] drm/msm: Add OUT_RING64() helper macro
2018-05-31 14:09 UTC (2+ messages)
[PATCH v2 0/3] drm/msm: re-factor devfreq common code
2018-05-31 14:07 UTC (5+ messages)
` [PATCH v2 1/3] drm/msm: suspend devfreq on init
` [PATCH v2 2/3] drm/msm: move suspend/resume devfreq to their own functions
` [PATCH v2 3/3] drm/msm: re-factor devfreq code
[DPU PATCH 00/11] Remove unused code and cleanup devicetree bindings for DPU driver
2018-05-31 11:41 UTC (13+ messages)
` [DPU PATCH 05/11] drm/msm/dpu: remove writeback support
` [DPU PATCH 06/11] drm/msm/dpu: remove hdcp support
` [DPU PATCH 08/11] dt-bindings: msm/disp: cleanup bindings for Snapdragon 845 DPU
` [DPU PATCH 02/11] dt-bindings: msm/disp: remove unused display port bindings
` [DPU PATCH 03/11] Revert "drm/msm: Add DisplayPort support"
` [DPU PATCH 04/11] dt-bindings: msm/disp: remove unused writeback bindings
` [DPU PATCH 07/11] drm/msm/dpu: remove dt parsing logic for bus_scale config
` [DPU PATCH 09/11] drm/msm/dpu: Remove unused code and move the header
` [DPU PATCH 10/11] drm/msm/dpu: correct dpu_io_util.h include path
` [DPU PATCH 11/11] drm/msm/dpu: move dpu_io_util to dpu folder
[PATCH] mmc: sdhci-msm: Remove NO_CARD_NO_RESET quirk
2018-05-31 11:04 UTC (3+ messages)
[PATCH v2 00/29] Venus updates
2018-05-31 9:55 UTC (23+ messages)
` [PATCH v2 11/29] venus: venc,vdec: adds clocks needed for venus 4xx
` [PATCH v2 12/29] venus: add common capability parser
` [PATCH v2 13/29] venus: helpers: make a commmon function for power_enable
` [PATCH v2 15/29] venus: helpers: rename a helper function and use buffer mode from caps
` [PATCH v2 16/29] venus: add a helper function to set dynamic buffer mode
` [PATCH v2 23/29] venus: helpers: add a helper to return opb buffer sizes
` [PATCH v2 25/29] venus: vdec: new function for output configuration
` [PATCH v2 27/29] venus: implementing multi-stream support
[PATCH v3 0/4] re-factor devfreq common code
2018-05-31 9:42 UTC (5+ messages)
` [PATCH v3 1/4] drm/msm: suspend devfreq on init
` [PATCH v3 2/4] drm/msm: move suspend/resume devfreq to their own functions
` [PATCH v3 3/4] drm/msm: re-factor devfreq code
` [PATCH v3 4/4] drm/msm: unregister devfreq upon clean up
[PATCH V2 0/4] Changes for SDCC5 version
2018-05-31 3:52 UTC (3+ messages)
` [PATCH V2 3/4] Documentation: sdhci-msm: Add new compatible string for SDCC v5
[PATCH v6 1/2] dt-bindings: pinctrl: qcom: add gpio-ranges, gpio-reserved-ranges
2018-05-31 0:14 UTC (2+ messages)
[PATCH v4 1/2] drm/panel: Add support for Truly NT35597 panel
2018-05-30 22:37 UTC (5+ messages)
[PATCH v9 00/10] drivers/qcom: add RPMH communication support
2018-05-30 21:50 UTC (7+ messages)
` [PATCH v9 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
` [PATCH v9 04/10] drivers: qcom: rpmh: add RPMH helper functions
` [PATCH v9 09/10] drivers: qcom: rpmh: add support for batch RPMH request
[PATCH v8 00/10] drivers/qcom: add RPMH communication support
2018-05-30 21:48 UTC (5+ messages)
` [PATCH v8 09/10] drivers: qcom: rpmh: add support for batch RPMH request
[PATCH v7 0/4] Add suppport for sn65dsi86 bridge chip and Innolux 2k edp panel
2018-05-30 21:30 UTC (4+ messages)
` [PATCH v7 2/4] dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings
[DPU PATCH] drm/msm: make pclk_rate u64 to avoid truncation
2018-05-30 20:35 UTC (2+ messages)
[PATCH v2 00/13] drm: Eliminate plane->fb/crtc usage for atomic drivers
2018-05-30 17:41 UTC (2+ messages)
[PATCH v3 1/2] regulator: dt-bindings: add QCOM RPMh regulator bindings
2018-05-30 16:59 UTC (21+ messages)
[PATCH v2 0/4] mmc: sdhci-msm: Corrections to implementation of power irq
2018-05-30 15:57 UTC (5+ messages)
` [PATCH v2 4/4] mmc: sdhci-msm: Add sdhci msm register write APIs which wait for pwr irq
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).