messages from 2019-11-12 08:42:31 to 2019-11-15 09:57:10 UTC [more...]
[PATCH v2 0/8] Add GPU & Video Clock controller driver for SC7180
2019-11-15 9:56 UTC (8+ messages)
` [PATCH v2 1/8] clk: qcom: alpha-pll: Remove useless read from set rate
` [PATCH v2 2/8] clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration
` [PATCH v2 3/8] dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings
` [PATCH v2 4/8] dt-bindings: clock: Introduce QCOM Graphics "
` [PATCH v2 5/8] clk: qcom: Add graphics clock controller driver for SC7180
` [PATCH v2 6/8] dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings
` [PATCH v2 7/8] dt-bindings: clock: Introduce QCOM Video "
[PATCH v1 0/7] Add GPU & Video Clock controller driver for SC7180
2019-11-15 8:11 UTC (12+ messages)
` [PATCH v1 1/7] clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration
` [PATCH v1 4/7] clk: qcom: Add graphics clock controller driver for SC7180
` [PATCH v1 7/7] clk: qcom: Add video "
[PATCH] ath10k: qmi: Sleep for a while before assigning MSA memory
2019-11-15 6:59 UTC (2+ messages)
[PATCH] ath10k: Revert "ath10k: add cleanup in ath10k_sta_state()"
2019-11-15 6:58 UTC (2+ messages)
[PATCH v5 2/7] scsi: ufs-qcom: Add reset control support for host controller
2019-11-15 6:09 UTC
[PATCH v3 0/1] Add USB related nodes for SC7180
2019-11-15 5:23 UTC (2+ messages)
` [PATCH v3 1/1] arm64: dts: qcom: sc7180: Add USB related nodes
[PATCH v2 1/1] arm64: dts: qcom: sc7180: Add USB related nodes
2019-11-15 5:03 UTC
[PATCH v5 1/3] tty: serial: qcom_geni_serial: IRQ cleanup
2019-11-15 4:59 UTC (5+ messages)
[PATCH v4 2/7] scsi: ufs-qcom: Add reset control support for host controller
2019-11-15 1:25 UTC (3+ messages)
[PATCH] drm/msm/dpu: ignore NULL clocks
2019-11-14 23:26 UTC (2+ messages)
[PATCH 0/3] thermal: tsens: Handle critical interrupts
2019-11-14 22:50 UTC (9+ messages)
` [PATCH 1/3] drivers: thermal: tsens: Add critical interrupt support
` [PATCH 2/3] drivers: thermal: tsens: Add watchdog support
` [PATCH 3/3] arm64: dts: sdm845: thermal: Add critical interrupt support
[PATCH 0/4] i2c: Use dma_request_chan() directly for channel request
2019-11-14 20:43 UTC (9+ messages)
` [PATCH 1/4] i2c: at91: "
` [PATCH 2/4] i2c: qup: "
` [PATCH 3/4] i2c: sh_mobile: "
` [PATCH 4/4] i2c: tegra: "
[PATCH 00/12] Support wakeup capable GPIOs
2019-11-14 18:57 UTC (15+ messages)
` [PATCH 01/12] irqdomain: add bus token DOMAIN_BUS_WAKEUP
` [PATCH 02/12] drivers: irqchip: qcom-pdc: update max PDC interrupts
` [PATCH 03/12] drivers: irqchip: pdc: Do not toggle IRQ_ENABLE during mask/unmask
` [PATCH 04/12] drivers: irqchip: add PDC irqdomain for wakeup capable GPIOs
` [PATCH 05/12] of: irq: document properties for wakeup interrupt parent
` [PATCH 06/12] genirq: Introduce irq_chip_get/set_parent_state calls
` [PATCH 07/12] drivers: irqchip: pdc: Add irqchip set/get state calls
` [PATCH 08/12] drivers: pinctrl: msm: setup GPIO chip in hierarchy
` [PATCH 09/12] drivers: pinctrl: sdm845: add PDC wakeup interrupt map for GPIOs
` [PATCH 10/12] arm64: dts: qcom: add PDC interrupt controller for SDM845
` [PATCH 11/12] arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845
` [PATCH 12/12] arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845
[PATCH v1 0/2] Add suppport for rm69299 Visionox panel driver and add DSI config to support DSI version
2019-11-14 18:12 UTC (8+ messages)
` [PATCH v1 1/2] drm/panel: add support for rm69299 visionox panel driver
` [PATCH v1 2/2] drm/msm: add DSI config changes to support DSI version
` [Freedreno] "
[PATCH v9 0/4] MSM8998 Multimedia Clock Controller
2019-11-14 17:58 UTC (8+ messages)
` [PATCH v9 1/4] dt-bindings: clock: Document external clocks for MSM8998 gcc
` [PATCH v9 2/4] dt-bindings: clock: Convert qcom,mmcc to DT schema
` [PATCH v9 3/4] dt-bindings: clock: Add support for the MSM8998 mmcc
` [PATCH v9 4/4] clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver
[PATCH 1/2] ARM: dts: msm8974: Add modem remoteproc node
2019-11-14 17:53 UTC (2+ messages)
` [PATCH 2/2] ARM: dts: msm8974: Move ADSP smd edge to ADSP PIL
[PATCH v5 2/3] tty: serial: qcom_geni_serial: Wakeup over UART RX
2019-11-14 17:40 UTC (2+ messages)
[v1] msm: disp: dpu1: add support to access hw irqs regs depending on revision
2019-11-14 17:39 UTC (2+ messages)
` [Freedreno] "
[PATCH v5 3/3] tty: serial: qcom_geni_serial: Remove sysfs file
2019-11-14 17:36 UTC (2+ messages)
[PATCH v4 0/5] Add Global Clock controller (GCC) driver for SC7180
2019-11-14 17:34 UTC (15+ messages)
` [PATCH v4 5/5] clk: qcom: "
[v2] msm: disp: dpu1: add support to access hw irqs regs depending on revision
2019-11-14 17:29 UTC (2+ messages)
[PATCH RFC] interconnect: Add interconnect_graph file to debugfs
2019-11-14 17:20 UTC (4+ messages)
[PATCH v1] Bluetooth: hci_qca: Enable clocks required for BT SOC
2019-11-14 17:19 UTC (3+ messages)
[PATCHv2 0/3] Add LLCC support for SC7180 SoC
2019-11-14 16:49 UTC (8+ messages)
[PATCH 0/9] spi: Use dma_request_chan() directly for channel request
2019-11-14 9:12 UTC (20+ messages)
` [PATCH 1/9] spi: at91-usart: "
` [PATCH 2/9] spi: atmel: "
` [PATCH 3/9] spi: fsl-lpspi: "
` [PATCH 4/9] spi: imx: "
` [PATCH 5/9] spi: pl022: "
` [PATCH 6/9] spi: qup: "
` [PATCH 7/9] spi: s3c64xx: "
` [PATCH 8/9] spi: tegra114: "
` [PATCH 9/9] spi: tegra20-slink: "
[PATCH 0/3] tty: serial: Use dma_request_chan() directly for channel request
2019-11-14 7:05 UTC (5+ messages)
` [PATCH 1/3] tty: serial: amba-pl011: "
` [PATCH 2/3] tty: serial: msm_serial: "
` [PATCH 3/3] tty: serial: tegra: "
Query regarding hid-multitouch.c driver in 4.14/4.19
2019-11-14 4:31 UTC
[PATCH] arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk
2019-11-13 23:22 UTC
[PATCH] ath10k: Handle when FW doesn't support QMI_WLFW_HOST_CAP_REQ_V01
2019-11-13 22:59 UTC (2+ messages)
[PATCH] arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845
2019-11-13 20:39 UTC
[PATCH v2 0/3] interconnect: Add basic tracepoints
2019-11-13 20:23 UTC (3+ messages)
` [PATCH v2 3/3] "
[PATCH RFC v2 00/14] Support wakeup capable GPIOs
2019-11-13 18:35 UTC (11+ messages)
` [PATCH RFC v2 06/14] dt-bindings/interrupt-controller: pdc: add SPI config register
` [PATCH RFC v2 10/14] drivers: pinctrl: msm: setup GPIO chip in hierarchy
[PATCH v2 0/2] remoteproc: mss: Improve mem_assign and firmware load
2019-11-13 18:02 UTC (4+ messages)
` [PATCH v2 1/2] remoteproc: qcom_q6v5_mss: Don't reassign mpss region on shutdown
[PATCH v2] rpmsg: core: add API to get MTU
2019-11-13 17:22 UTC
[PATCH v2] ath10k: Handle "invalid" BDFs for msm8998 devices
2019-11-13 15:46 UTC
[PATCH v2] ath10k: Fix qmi init error handling
2019-11-13 15:40 UTC
[PATCH] ath10k: Fix qmi init error handling
2019-11-13 15:11 UTC (5+ messages)
[PATCH v10 0/3] Add MSM8916 interconnect provider driver
2019-11-13 13:24 UTC (4+ messages)
` [PATCH v10 2/3] interconnect: qcom: "
[RFC-v2 0/2] Add Support for SDHC bus bandwidth voting
2019-11-13 13:16 UTC (3+ messages)
` [RFC-v2 1/2] dt-bindings: mmc: sdhci-msm: Add Bus BW vote supported strings
[PATCH v3 0/2] PCI: qcom: Add support for SDM845 PCIe
2019-11-13 12:47 UTC (3+ messages)
` [PATCH v3 2/2] PCI: qcom: Add support for SDM845 PCIe controller
[PATCH][next] backlight: qcom-wled: fix spelling mistake "trigged" -> "triggered"
2019-11-13 11:32 UTC (3+ messages)
[PATCH] drm/msm/mdp5: enable autocommit
2019-11-13 11:23 UTC (3+ messages)
[PATCH] arm64: defconfig: Enable Qualcomm SDM845 display and gpu clocks
2019-11-13 9:34 UTC (2+ messages)
[PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION
2019-11-13 8:53 UTC (5+ messages)
[PATCH] ath10k: Handle "invalid" BDFs for msm8998 devices
2019-11-13 7:00 UTC (6+ messages)
[PATCH AUTOSEL 4.19 078/209] rpmsg: glink: smem: Support rx peak for size less than 4 bytes
2019-11-13 1:49 UTC (5+ messages)
` [PATCH AUTOSEL 4.19 079/209] msm/gpu/a6xx: Force of_dma_configure to setup DMA for GMU
` [PATCH AUTOSEL 4.19 117/209] i2c: qup: use core to detect 'no zero length' quirk
` [PATCH AUTOSEL 4.19 126/209] remoteproc: qcom: q6v5: Fix a race condition on fatal crash
` [PATCH AUTOSEL 4.19 166/209] media: venus: vdec: fix decoded data size
[PATCH v4 0/6] Initialise thermal framework and cpufreq earlier during boot
2019-11-13 0:30 UTC (3+ messages)
` [PATCH v4 6/6] cpufreq: qcom-hw: Move driver initialisation earlier
[PATCH v8 0/4] MSM8998 Multimedia Clock Controller
2019-11-12 22:03 UTC (14+ messages)
` [PATCH v8 1/4] dt-bindings: clock: Document external clocks for MSM8998 gcc
` [PATCH v8 2/4] dt-bindings: clock: Convert qcom,mmcc to DT schema
` [PATCH v8 3/4] dt-bindings: clock: Add support for the MSM8998 mmcc
[PATCH v2 00/18] Restructure, improve target support for qcom_scm driver
2019-11-12 21:22 UTC (19+ messages)
` [PATCH v2 01/18] firmware: qcom_scm: Rename macros and structures
` [PATCH v2 02/18] firmware: qcom_scm: Add funcnum IDs
` [PATCH v2 03/18] firmware: qcom_scm-64: Make SMCCC macros less magical
` [PATCH v2 04/18] firmware: qcom_scm: Apply consistent naming scheme to command IDs
` [PATCH v2 05/18] firmware: qcom_scm: Remove unused qcom_scm_get_version
` [PATCH v2 06/18] firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc
` [PATCH v2 07/18] firmware: qcom_scm-64: Add SCM results to descriptor
` [PATCH v2 08/18] firmware: qcom_scm-64: Remove qcom_scm_call_do_smccc
` [PATCH v2 09/18] firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc
` [PATCH v2 10/18] firmware: qcom_scm-64: Improve SMC convention detection
` [PATCH v2 11/18] firmware: qcom_scm-32: Use SMC arch wrappers
` [PATCH v2 12/18] firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls
` [PATCH v2 13/18] firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call
` [PATCH v2 14/18] firmware: qcom_scm-32: Create common legacy atomic call
` [PATCH v2 15/18] firmware: qcom_scm-32: Add device argument to atomic calls
` [PATCH v2 16/18] firmware: qcom_scm: Remove thin wrappers
` [PATCH v2 17/18] firmware: qcom_scm: Dynamically support SMCCC and legacy conventions
` [PATCH v2 18/18] firmware: qcom_scm: Order functions, definitions by service/command
[PATCH 0/4] treewide: fix interrupted release
2019-11-12 20:42 UTC (7+ messages)
` [PATCH 1/4] drm/msm: fix memleak on release
Investment opportunity
2019-11-12 17:57 UTC
[PATCH 00/16] drivers: y2038 updates
2019-11-12 16:55 UTC (3+ messages)
` [PATCH 14/16] drm/msm: avoid using 'timespec'
[Freedreno] drm/msm: 'pp done time out' errors after async commit changes
2019-11-12 10:54 UTC (11+ messages)
[PATCH V2] mfd: qcom-spmi-pmic: Add support for pm6150 and pm6150l
2019-11-12 9:03 UTC (3+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).