linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2020-02-04 21:21:06 to 2020-02-08 00:28:35 UTC [more...]

[PATCH v5 00/18] Enable Qualcomm QCS 404 HS/SS USB
 2020-02-08  0:28 UTC  (24+ messages)
` [PATCH v5 01/18] dt-bindings: phy: remove qcom-dwc3-usb-phy
` [PATCH v5 02/18] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding
` [PATCH v5 03/18] phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver
` [PATCH v5 04/18] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
` [PATCH v5 05/18] phy: qualcomm: usb: Add SuperSpeed PHY driver
` [PATCH v5 06/18] usb: dwc3: Registering a role switch in the DRD code
` [PATCH v5 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example
` [PATCH v5 08/18] dt-bindings: usb: dwc3: Add a usb-role-switch to the example
` [PATCH v5 09/18] usb: dwc3: qcom: Add support for usb-conn-gpio connectors
` [PATCH v5 10/18] usb: dwc3: "
` [PATCH v5 11/18] usb: dwc3: Add support for a role-switch notifier
` [PATCH v5 12/18] usb: dwc3: qcom: Enable gpio-usb-conn based role-switching
` [PATCH v5 13/18] arm64: dts: qcom: qcs404: Add USB devices and PHYs
` [PATCH v5 14/18] arm64: dts: qcom: qcs404-evb: Define VBUS pins
` [PATCH v5 15/18] arm64: dts: qcom: qcs404-evb: Define USB ID pin
` [PATCH v5 16/18] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator
` [PATCH v5 17/18] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage
` [PATCH v5 18/18] arm64: dts: qcom: qcs404-evb: Enable USB controllers

[PATCH v7 4/8] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
 2020-02-08  0:10 UTC  (6+ messages)
` [PATCH v7 7/8] scsi: ufs-qcom: Delay specific time before gate ref clk

[PATCH 0/8] ASoC: qdsp6: db820c: Add support for external and bluetooth audio
 2020-02-07 20:50 UTC  (9+ messages)
` [PATCH 1/8] ASoC: qdsp6: dt-bindings: Add q6afe pcm dt binding
` [PATCH 2/8] ASoC: qdsp6: q6afe: add support to pcm ports
` [PATCH 3/8] ASoC: qdsp6: q6afe-dai: add support to pcm port dais
` [PATCH 4/8] ASoC: qdsp6: q6routing: add pcm port routing
` [PATCH 5/8] ASoC: qcom: apq8096: add support for primary and quaternary I2S/PCM
` [PATCH 6/8] ASoC: qcom/common: Use snd-soc-dummy-dai when codec is not specified
` [PATCH 7/8] dts: msm8996/db820c: enable primary pcm and quaternary i2s
` [PATCH 8/8] ASoC: qcom: apq8096: add kcontrols to set PCM rate

[PATCH v3 0/7] Add RSC power domain support
 2020-02-07 16:15 UTC  (22+ messages)
` [PATCH v3 5/7] drivers: firmware: psci: Add hierarchical domain idle states converter
` [PATCH v3 6/7] arm64: dts: qcom: sc7180: Add cpuidle low power states

[PATCH v2 0/4] Add support for devices in the Energy Model
 2020-02-07 15:59 UTC  (7+ messages)
` [PATCH v2 1/4] PM / EM: add devices to "
` [PATCH v2 2/4] OPP: change parameter to device pointer in dev_pm_opp_of_register_em()
` [PATCH v2 3/4] thermal: devfreq_cooling: Refactor code and switch to use Energy Model
` [PATCH v2 4/4] drm/panfrost: Register to the Energy Model with devfreq device

[PATCH v4 00/18] Enable Qualcomm QCS 404 HS/SS USB
 2020-02-07 15:04 UTC  (23+ messages)
` [PATCH v4 01/18] dt-bindings: phy: remove qcom-dwc3-usb-phy
` [PATCH v4 02/18] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding
` [PATCH v4 03/18] phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver
` [PATCH v4 04/18] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
` [PATCH v4 05/18] phy: qualcomm: usb: Add SuperSpeed PHY driver
` [PATCH v4 06/18] usb: dwc3: Registering a role switch in the DRD code
` [PATCH v4 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example
` [PATCH v4 08/18] dt-bindings: usb: dwc3: Add a usb-role-switch to the example
` [PATCH v4 09/18] usb: dwc3: qcom: Override VBUS when using gpio_usb_connector
` [PATCH v4 10/18] usb: dwc3: Add support for usb-conn-gpio connectors
` [PATCH v4 11/18] arm64: dts: qcom: qcs404: Add USB devices and PHYs
` [PATCH v4 12/18] arm64: dts: qcom: qcs404-evb: Define VBUS detect pin
` [PATCH v4 13/18] arm64: dts: qcom: qcs404-evb: Define VBUS boost pin
` [PATCH v4 14/18] arm64: dts: qcom: qcs404-evb: Define USB ID pin
` [PATCH v4 15/18] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator
` [PATCH v4 16/18] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage
` [PATCH v4 17/18] arm64: dts: qcom: qcs404-evb: Enable secondary USB controller
` [PATCH v4 18/18] arm64: dts: qcom: qcs404-evb: Enable primary "

[RFC v3 0/2] Add SDHC interconnect bandwidth scaling
 2020-02-07 14:44 UTC  (3+ messages)
` [RFC v3 1/2] mmc: sdhci-msm: Add interconnect bus bandwidth scaling support
` [RFC v3 2/2] dt-bindings: mmc: sdhci-msm: Add interconnect BW scaling strings

[v1] drm/msm/dsi/pll: call vco set rate explicitly
 2020-02-07 14:10 UTC  (4+ messages)
` [Freedreno] "

[PATCH V2] mmc: sdhci-msm: Update system suspend/resume callbacks of sdhci-msm platform driver
 2020-02-07 13:20 UTC 

[PATCH V1] mmc: sdhci-msm: Don't enable PWRSAVE_DLL for certain sdhc hosts
 2020-02-07 12:07 UTC  (3+ messages)
` [PATCH V2] "

[PATCH v1 1/2] dt-bindings: clk: qcom: Add support for GPU GX GDSCR
 2020-02-07 10:39 UTC  (2+ messages)
` [PATCH v1 2/2] clk: qcom: gpucc: Add support for GX GDSC for SC7180

[PATCH v3 0/3] Add modem Clock controller (MSS CC) driver for SC7180
 2020-02-07 10:27 UTC  (5+ messages)
` [PATCH v3 1/3] dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings

[PATCH v4 0/2] Add Embedded USB Debugger (EUD) driver
 2020-02-07 10:04 UTC  (3+ messages)
` [PATCH v4 2/2] "

[PATCH v3 0/2] remoteproc: Add elf64 support to elf loader
 2020-02-07  7:57 UTC  (9+ messages)
  ` [PATCH v3 1/2] remoteproc: Use u64 len for da_to_va
  ` [PATCH v3 2/2] remoteproc: Add elf64 support in elf loader

[PATCH V3 1/2] mfd: qcom-spmi-pmic: Convert bindings to .yaml format
 2020-02-07  6:46 UTC  (8+ messages)
` [PATCH V3 2/2] mfd: qcom-spmi-pmic: Add support for pm6150 and pm6150l

[PATCH v6] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
 2020-02-07  6:41 UTC  (2+ messages)

[PATCHv2 0/2] Convert QCOM watchdog timer bindings to YAML
 2020-02-07  6:10 UTC  (6+ messages)
` [PATCHv2 1/2] dt-bindings: watchdog: "
` [PATCHv2 2/2] dt-bindings: watchdog: Add compatible for QCS404, SC7180, SDM845, SM8150

[PATCH v2 00/16] Add MHI bus support
 2020-02-07  0:14 UTC  (28+ messages)
` [PATCH v2 02/16] bus: mhi: core: Add support for registering MHI controllers
` [PATCH v2 04/16] bus: mhi: core: Add support for creating and destroying MHI devices
` [PATCH v2 05/16] bus: mhi: core: Add support for ringing channel/event ring doorbells
` [PATCH v2 06/16] bus: mhi: core: Add support for PM state transitions
` [PATCH v2 07/16] bus: mhi: core: Add support for basic PM operations
` [PATCH v2 08/16] bus: mhi: core: Add support for downloading firmware over BHIe
` [PATCH v2 09/16] bus: mhi: core: Add support for downloading RDDM image during panic
` [PATCH v2 10/16] bus: mhi: core: Add support for processing events from client device
` [PATCH v2 11/16] bus: mhi: core: Add support for data transfer
` [PATCH v2 12/16] bus: mhi: core: Add uevent support for module autoloading
` [PATCH v2 14/16] net: qrtr: Add MHI transport layer

[PATCH v4 0/6] Add RSC power domain support
 2020-02-06 21:44 UTC  (8+ messages)
` [PATCH v4 1/6] drivers: qcom: rpmh: fix macro to accept NULL argument
` [PATCH v4 2/6] drivers: qcom: rpmh: remove rpmh_flush export
` [PATCH v4 3/6] dt-bindings: soc: qcom: Add RSC power domain specifier
` [PATCH v4 4/6] drivers: qcom: rpmh-rsc: Add RSC power domain support
` [PATCH v4 5/6] drivers: firmware: psci: Allow hierarchical topology in PC mode
` [PATCH v4 6/6] arm64: dts: qcom: sc7180: Add cpuidle low power states

[PATCH v4 0/8] Add QUSB2 PHY support for SC7180
 2020-02-06 17:34 UTC  (5+ messages)
` [PATCH v4 1/8] dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml
` [PATCH v4 2/8] dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180

[v1] dt-bindings: msm:disp: update dsi and dpu bindings
 2020-02-06 19:13 UTC  (2+ messages)

[PATCH 1/3] watchdog: qcom-wdt: add option to skip pretimeout
 2020-02-06 19:15 UTC  (4+ messages)
` [PATCH 2/3] Documentation: watchdog: qcom-wdt: Remove deprecated compatible

[PATCH v2] drm/msm: Fix a6xx GMU shutdown sequence
 2020-02-06 19:12 UTC  (3+ messages)

[PATCH V1] mmc: sdhci-msm: Add system suspend/resume callbacks
 2020-02-06 15:44 UTC  (3+ messages)

[v1] drm/msm/dsi: save pll state before dsi host is powered off
 2020-02-06 14:51 UTC  (2+ messages)
` [Freedreno] "

[v1] drm/msm/dsi: save pll state before dsi host is powered off
 2020-02-06  8:56 UTC 

[PATCH 4/8] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
 2020-02-06  6:56 UTC  (2+ messages)
` [PATCH 7/8] scsi: ufs-qcom: Delay specific time before gate ref clk

[PATCH v2] scsi: ufs: Fix registers dump vops caused scheduling while atomic
 2020-02-06  3:42 UTC  (2+ messages)

[PATCH] scsi: ufs: Fix registers dump vops caused scheduling while atomic
 2020-02-05 22:45 UTC  (4+ messages)

[PATCH] drm/msm/a6xx: Remove unneeded GBIF unhalt
 2020-02-05 21:20 UTC  (3+ messages)

[PATCH] drm/msm/a6xx: Update the GMU bus tables for sc7180
 2020-02-05 21:18 UTC  (2+ messages)

[PATCH v2 0/7] Add device tree and clock drivers for SM8250 SoC
 2020-02-05 19:47 UTC  (6+ messages)
` [PATCH v2 4/7] clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs
` [PATCH v2 7/7] arm64: dts: qcom: sm8250: Add sm8250 dts file
  ` [PATCH v2 6/7] clk: qcom: gcc: Add global clock controller driver for SM8250

[PATCH v4 0/3] sc7180: Add A618 GPU bindings
 2020-02-05 19:24 UTC  (8+ messages)
` [PATCH v4 1/3] dt-bindings: clk: qcom: Add support for GPU GX GDSCR
` [PATCH v4 2/3] clk: qcom: gpucc: Add support for GX GDSC for SC7180
` [PATCH v4 3/3] arm64: dts: qcom: sc7180: Add A618 gpu dt blob

[PATCH 0/3] Misc stability fixes and optimization for rpmh driver
 2020-02-05 18:21 UTC  (9+ messages)
` [PATCH 1/3] soc: qcom: rpmh: Update dirty flag only when data changes
` [PATCH 2/3] soc: qcom: rpmh: Update rpm_msgs offset address and add list_del

[PATCHv3 0/2] Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel
 2020-02-05 16:40 UTC  (4+ messages)
` [PATCHv3 1/2] dt-bindings: display: add visionox rm69299 panel variant
` [PATCHv3 2/2] drm/panel: add support for rm69299 visionox panel driver

[PATCH v1] Bluetooth: hci_qca: Bug fixes while collecting controller memory dump
 2020-02-05 12:52 UTC  (5+ messages)

[PATCH v1] Bluetooth: hci_qca: Optimized code while enabling clocks for BT SOC
 2020-02-05 11:50 UTC  (2+ messages)

[PATCH v2 1/2] Bluetooth: hci_qca: Enable clocks required for BT SOC
 2020-02-05 10:37 UTC  (4+ messages)

[PATCH v5 4/8] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
 2020-02-05  7:20 UTC  (4+ messages)
` [PATCH v5 7/8] scsi: ufs-qcom: Delay specific time before gate ref clk

[PATCH] clk: qcom: alpha-pll: Make error prints more informative
 2020-02-05  6:54 UTC 

[PATCH v3] Add A618 GPU nodes
 2020-02-05  6:51 UTC  (4+ messages)
` [PATCH v3] arm64: dts: qcom: sc7180: Add A618 gpu dt blob

[PATCH v3 00/19] Enable Qualcomm QCS 404 HS/SS USB
 2020-02-04 23:54 UTC  (4+ messages)
` [PATCH v3 06/19] dt-bindings: usb: dwc3: Add a gpio-usb-connector description

[PATCH V3 0/3] ADD interconnect support for Qualcomm DWC3 driver
 2020-02-04 21:25 UTC  (3+ messages)
` [PATCH V3 2/3] usb: dwc3: qcom: Add interconnect support in dwc3 driver

[PATCH 0/3] Misc qcom geni i2c driver fixes
 2020-02-04 21:20 UTC  (3+ messages)
` [PATCH 3/3] i2c: qcom-geni: Drop of_platform.h include


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).