linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2020-02-06 13:47:21 to 2020-02-10 14:50:25 UTC [more...]

[PATCH 0/8] ASoC: qdsp6: db820c: Add support for external and bluetooth audio
 2020-02-10 14:50 UTC  (26+ messages)
` [PATCH 1/8] ASoC: qdsp6: dt-bindings: Add q6afe pcm dt binding
` [PATCH 2/8] ASoC: qdsp6: q6afe: add support to pcm ports
` [PATCH 3/8] ASoC: qdsp6: q6afe-dai: add support to pcm port dais
` [PATCH 4/8] ASoC: qdsp6: q6routing: add pcm port routing
` [PATCH 5/8] ASoC: qcom: apq8096: add support for primary and quaternary I2S/PCM
` [PATCH 6/8] ASoC: qcom/common: Use snd-soc-dummy-dai when codec is not specified
` [PATCH 7/8] dts: msm8996/db820c: enable primary pcm and quaternary i2s
` [PATCH 8/8] ASoC: qcom: apq8096: add kcontrols to set PCM rate
` [PATCH v2 0/8] ASoC: qdsp6: db820c: Add support for external and bluetooth audio
  ` [PATCH v2 1/8] ASoC: qdsp6: dt-bindings: Add q6afe pcm dt binding
  ` [PATCH v2 2/8] ASoC: qdsp6: q6afe: add support to pcm ports
  ` [PATCH v2 3/8] ASoC: qdsp6: q6afe-dai: add support to pcm port dais
  ` [PATCH v2 4/8] ASoC: qdsp6: q6routing: add pcm port routing
  ` [PATCH v2 5/8] ASoC: qcom: apq8096: add support for primary and quaternary I2S/PCM
  ` [PATCH v2 6/8] ASoC: qcom/common: Use snd-soc-dummy-dai when codec is not specified
  ` [PATCH v2 7/8] arm64: dts: qcom: db820c: Enable primary PCM and quaternary I2S
  ` [PATCH v2 8/8] ASoC: qcom: apq8096: add kcontrols to set PCM rate

[PATCH] spmi: pmic-arb: Set lockdep class for hierarchical irq domains
 2020-02-10 12:18 UTC  (5+ messages)

[PATCH v6 00/18] Enable Qualcomm QCS 404 HS/SS USB
 2020-02-10 12:07 UTC  (19+ messages)
` [PATCH v6 01/18] dt-bindings: phy: remove qcom-dwc3-usb-phy
` [PATCH v6 02/18] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding
` [PATCH v6 03/18] phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver
` [PATCH v6 04/18] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
` [PATCH v6 05/18] phy: qualcomm: usb: Add SuperSpeed PHY driver
` [PATCH v6 06/18] usb: dwc3: Registering a role switch in the DRD code
` [PATCH v6 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example
` [PATCH v6 08/18] dt-bindings: usb: dwc3: Add a usb-role-switch to the example
` [PATCH v6 09/18] usb: dwc3: qcom: Add support for usb-conn-gpio connectors
` [PATCH v6 10/18] usb: dwc3: "
` [PATCH v6 11/18] usb: dwc3: Add support for a role-switch notifier
` [PATCH v6 12/18] usb: dwc3: qcom: Enable gpio-usb-conn based role-switching
` [PATCH v6 13/18] arm64: dts: qcom: qcs404: Add USB devices and PHYs
` [PATCH v6 14/18] arm64: dts: qcom: qcs404-evb: Define VBUS pins
` [PATCH v6 15/18] arm64: dts: qcom: qcs404-evb: Define USB ID pin
` [PATCH v6 16/18] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator
` [PATCH v6 17/18] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage
` [PATCH v6 18/18] arm64: dts: qcom: qcs404-evb: Enable USB controllers

Query: Regarding Notifier chain callback debugging or profiling
 2020-02-10 11:56 UTC 

[PATCH v3 0/7] Add RSC power domain support
 2020-02-10 10:31 UTC  (21+ messages)
` [PATCH v3 5/7] drivers: firmware: psci: Add hierarchical domain idle states converter

[PATCH v6] sc7180: Add A618 GPU bindings
 2020-02-10  7:41 UTC  (2+ messages)
` [PATCH v6] arm64: dts: qcom: sc7180: Add A618 gpu dt blob

[PATCH v4 0/2] Add USB DWC3 support for SC7180
 2020-02-10  6:36 UTC  (3+ messages)
` [PATCH v4 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
` [PATCH v4 2/2] dt-bindings: usb: qcom,dwc3: Add compatible for SC7180

[PATCH v2 0/7] Add device tree and clock drivers for SM8250 SoC
 2020-02-10  5:56 UTC  (4+ messages)
` [PATCH v2 4/7] clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs

[PATCH v2 1/2] dt-bindings: clk: qcom: Add support for GPU GX GDSCR
 2020-02-10  4:01 UTC  (2+ messages)
` [PATCH v2 2/2] clk: qcom: gpucc: Add support for GX GDSC for SC7180

[PATCH v3 0/6] Split SDM845 interconnect nodes and consolidate RPMh support
 2020-02-09 18:34 UTC  (7+ messages)
` [PATCH v3 1/6] dt-bindings: interconnect: Convert qcom,sdm845 to DT schema
` [PATCH v3 2/6] dt-bindings: interconnect: Add YAML schemas for QCOM bcm-voter
` [PATCH v3 3/6] dt-bindings: interconnect: Update Qualcomm SDM845 DT bindings
` [PATCH v3 4/6] interconnect: qcom: Consolidate interconnect RPMh support
` [PATCH v3 5/6] interconnect: qcom: sdm845: Split qnodes into their respective NoCs
` [PATCH v3 6/6] arm64: dts: sdm845: Redefine interconnect provider DT nodes

[PATCH v2 0/6] Split SDM845 interconnect nodes and consolidate RPMh support
 2020-02-09 18:04 UTC  (10+ messages)
` [PATCH v2 4/6] interconnect: qcom: Consolidate interconnect "
` [PATCH v2 5/6] interconnect: qcom: sdm845: Split qnodes into their respective NoCs
` [PATCH v2 6/6] arm64: dts: sdm845: Redefine interconnect provider DT nodes

[PATCHv3 0/2] Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel
 2020-02-09  8:31 UTC  (3+ messages)
` [PATCHv3 1/2] dt-bindings: display: add visionox rm69299 panel variant

[PATCH 4/7] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
 2020-02-09  7:58 UTC  (4+ messages)
` [PATCH 7/7] scsi: ufs-qcom: Delay specific time before gate ref clk

[PATCH v4 0/3] sc7180: Add A618 GPU bindings
 2020-02-09  0:18 UTC  (4+ messages)
` [PATCH v4 3/3] arm64: dts: qcom: sc7180: Add A618 gpu dt blob

[PATCH 0/2] iommu/arm-smmu: Allow client devices to select direct mapping
 2020-02-09  0:00 UTC  (3+ messages)
` [PATCH 1/2] iommu: arm-smmu-impl: Convert to a generic reset implementation

[RFC v3 0/2] Add SDHC interconnect bandwidth scaling
 2020-02-08 23:39 UTC  (5+ messages)
` [RFC v3 1/2] mmc: sdhci-msm: Add interconnect bus bandwidth scaling support
` [RFC v3 2/2] dt-bindings: mmc: sdhci-msm: Add interconnect BW scaling strings

[PATCH v5] sc7180: Add A618 GPU bindings
 2020-02-08 19:10 UTC  (2+ messages)
` [PATCH v5] arm64: dts: qcom: sc7180: Add A618 gpu dt blob

[PATCH v2 0/4] Add support for devices in the Energy Model
 2020-02-08 10:39 UTC  (9+ messages)
` [PATCH v2 1/4] PM / EM: add devices to "
` [PATCH v2 2/4] OPP: change parameter to device pointer in dev_pm_opp_of_register_em()
` [PATCH v2 3/4] thermal: devfreq_cooling: Refactor code and switch to use Energy Model
` [PATCH v2 4/4] drm/panfrost: Register to the Energy Model with devfreq device

[PATCH v5 00/18] Enable Qualcomm QCS 404 HS/SS USB
 2020-02-08  0:28 UTC  (24+ messages)
` [PATCH v5 01/18] dt-bindings: phy: remove qcom-dwc3-usb-phy
` [PATCH v5 02/18] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding
` [PATCH v5 03/18] phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver
` [PATCH v5 04/18] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
` [PATCH v5 05/18] phy: qualcomm: usb: Add SuperSpeed PHY driver
` [PATCH v5 06/18] usb: dwc3: Registering a role switch in the DRD code
` [PATCH v5 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example
` [PATCH v5 08/18] dt-bindings: usb: dwc3: Add a usb-role-switch to the example
` [PATCH v5 09/18] usb: dwc3: qcom: Add support for usb-conn-gpio connectors
` [PATCH v5 10/18] usb: dwc3: "
` [PATCH v5 11/18] usb: dwc3: Add support for a role-switch notifier
` [PATCH v5 12/18] usb: dwc3: qcom: Enable gpio-usb-conn based role-switching
` [PATCH v5 13/18] arm64: dts: qcom: qcs404: Add USB devices and PHYs
` [PATCH v5 14/18] arm64: dts: qcom: qcs404-evb: Define VBUS pins
` [PATCH v5 15/18] arm64: dts: qcom: qcs404-evb: Define USB ID pin
` [PATCH v5 16/18] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator
` [PATCH v5 17/18] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage
` [PATCH v5 18/18] arm64: dts: qcom: qcs404-evb: Enable USB controllers

[PATCH v7 7/8] scsi: ufs-qcom: Delay specific time before gate ref clk
 2020-02-08  0:10 UTC  (5+ messages)

[PATCH v4 00/18] Enable Qualcomm QCS 404 HS/SS USB
 2020-02-07 15:04 UTC  (23+ messages)
` [PATCH v4 01/18] dt-bindings: phy: remove qcom-dwc3-usb-phy
` [PATCH v4 02/18] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding
` [PATCH v4 03/18] phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver
` [PATCH v4 04/18] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
` [PATCH v4 05/18] phy: qualcomm: usb: Add SuperSpeed PHY driver
` [PATCH v4 06/18] usb: dwc3: Registering a role switch in the DRD code
` [PATCH v4 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example
` [PATCH v4 08/18] dt-bindings: usb: dwc3: Add a usb-role-switch to the example
` [PATCH v4 09/18] usb: dwc3: qcom: Override VBUS when using gpio_usb_connector
` [PATCH v4 10/18] usb: dwc3: Add support for usb-conn-gpio connectors
` [PATCH v4 11/18] arm64: dts: qcom: qcs404: Add USB devices and PHYs
` [PATCH v4 12/18] arm64: dts: qcom: qcs404-evb: Define VBUS detect pin
` [PATCH v4 13/18] arm64: dts: qcom: qcs404-evb: Define VBUS boost pin
` [PATCH v4 14/18] arm64: dts: qcom: qcs404-evb: Define USB ID pin
` [PATCH v4 15/18] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator
` [PATCH v4 16/18] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage
` [PATCH v4 17/18] arm64: dts: qcom: qcs404-evb: Enable secondary USB controller
` [PATCH v4 18/18] arm64: dts: qcom: qcs404-evb: Enable primary "

[v1] drm/msm/dsi/pll: call vco set rate explicitly
 2020-02-07 14:10 UTC  (4+ messages)
` [Freedreno] "

[PATCH V2] mmc: sdhci-msm: Update system suspend/resume callbacks of sdhci-msm platform driver
 2020-02-07 13:20 UTC 

[PATCH V1] mmc: sdhci-msm: Don't enable PWRSAVE_DLL for certain sdhc hosts
 2020-02-07 12:07 UTC  (3+ messages)
` [PATCH V2] "

[PATCH v1 1/2] dt-bindings: clk: qcom: Add support for GPU GX GDSCR
 2020-02-07 10:39 UTC  (2+ messages)
` [PATCH v1 2/2] clk: qcom: gpucc: Add support for GX GDSC for SC7180

[PATCH v3 0/3] Add modem Clock controller (MSS CC) driver for SC7180
 2020-02-07 10:27 UTC  (5+ messages)
` [PATCH v3 1/3] dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings

[PATCH v4 0/2] Add Embedded USB Debugger (EUD) driver
 2020-02-07 10:04 UTC  (3+ messages)
` [PATCH v4 2/2] "

[PATCH v3 0/2] remoteproc: Add elf64 support to elf loader
 2020-02-07  7:57 UTC  (7+ messages)
  ` [PATCH v3 2/2] remoteproc: Add elf64 support in "

[PATCH V3 1/2] mfd: qcom-spmi-pmic: Convert bindings to .yaml format
 2020-02-07  6:46 UTC  (8+ messages)
` [PATCH V3 2/2] mfd: qcom-spmi-pmic: Add support for pm6150 and pm6150l

[PATCH v6] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
 2020-02-07  6:41 UTC  (2+ messages)

[PATCHv2 0/2] Convert QCOM watchdog timer bindings to YAML
 2020-02-07  6:10 UTC  (6+ messages)
` [PATCHv2 1/2] dt-bindings: watchdog: "
` [PATCHv2 2/2] dt-bindings: watchdog: Add compatible for QCS404, SC7180, SDM845, SM8150

[PATCH v2 00/16] Add MHI bus support
 2020-02-07  0:14 UTC  (28+ messages)
` [PATCH v2 02/16] bus: mhi: core: Add support for registering MHI controllers
` [PATCH v2 04/16] bus: mhi: core: Add support for creating and destroying MHI devices
` [PATCH v2 05/16] bus: mhi: core: Add support for ringing channel/event ring doorbells
` [PATCH v2 06/16] bus: mhi: core: Add support for PM state transitions
` [PATCH v2 07/16] bus: mhi: core: Add support for basic PM operations
` [PATCH v2 08/16] bus: mhi: core: Add support for downloading firmware over BHIe
` [PATCH v2 09/16] bus: mhi: core: Add support for downloading RDDM image during panic
` [PATCH v2 10/16] bus: mhi: core: Add support for processing events from client device
` [PATCH v2 11/16] bus: mhi: core: Add support for data transfer
` [PATCH v2 12/16] bus: mhi: core: Add uevent support for module autoloading
` [PATCH v2 14/16] net: qrtr: Add MHI transport layer

[PATCH v4 0/6] Add RSC power domain support
 2020-02-06 21:44 UTC  (3+ messages)
` [PATCH v4 3/6] dt-bindings: soc: qcom: Add RSC power domain specifier

[PATCH v4 0/8] Add QUSB2 PHY support for SC7180
 2020-02-06 17:34 UTC  (5+ messages)
` [PATCH v4 1/8] dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml
` [PATCH v4 2/8] dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180

[v1] dt-bindings: msm:disp: update dsi and dpu bindings
 2020-02-06 19:13 UTC  (2+ messages)

[PATCH 1/3] watchdog: qcom-wdt: add option to skip pretimeout
 2020-02-06 19:15 UTC  (4+ messages)
` [PATCH 2/3] Documentation: watchdog: qcom-wdt: Remove deprecated compatible

[PATCH v2] drm/msm: Fix a6xx GMU shutdown sequence
 2020-02-06 19:12 UTC  (3+ messages)

[PATCH V1] mmc: sdhci-msm: Add system suspend/resume callbacks
 2020-02-06 15:44 UTC  (3+ messages)

[v1] drm/msm/dsi: save pll state before dsi host is powered off
 2020-02-06 14:51 UTC  (2+ messages)
` [Freedreno] "


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).