messages from 2020-03-26 07:07:20 to 2020-03-31 06:08:58 UTC [more...]
[PATCH 0/4] clk: qcom: gdsc: Handle supply regulators
2020-03-31 6:08 UTC (9+ messages)
` [PATCH 1/4] clk: qcom: gdsc: Handle GDSC regulator supplies
` [PATCH 2/4] clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc
[PATCH v8] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
2020-03-31 5:54 UTC
[PATCH v7] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
2020-03-31 5:54 UTC (6+ messages)
[PATCH v2 1/2] dt-bindings: arm: cpus: Add kryo468 compatible
2020-03-31 5:44 UTC (2+ messages)
` [PATCH v2 2/2] arm64: dts: qcom: sc7180: Fix cpu compatible
[PATCH v6 0/4] ADD interconnect support for Qualcomm DWC3 driver
2020-03-31 5:15 UTC (10+ messages)
` [PATCH v6 1/4] dt-bindings: usb: qcom,dwc3: Introduce interconnect properties "
` [PATCH v6 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
` [PATCH v6 3/4] arm64: dts: qcom: sdm845: Add interconnect properties for USB
` [PATCH v6 4/4] arm64: dts: qcom: sc7180: "
[PATCH 1/2] dt-bindings: arm: cpus: Add kryo468 compatible
2020-03-30 23:05 UTC (2+ messages)
[Patch v5 0/6] Introduce Power domain based warming device driver
2020-03-30 22:29 UTC (12+ messages)
` [Patch v5 1/6] PM/Domains: Add support for retrieving genpd performance states information
` [Patch v5 2/6] soc: qcom: rpmhpd: Introduce function to retrieve power domain performance state count
` [Patch v5 4/6] soc: qcom: Extend RPMh power controller driver to register warming devices
` [Patch v5 6/6] arm64: dts: qcom: Indicate rpmhpd hosts a power domain that can be used as a warming device
[PATCH v3 0/7] Improvements to MHI Bus
2020-03-30 22:19 UTC (10+ messages)
` [PATCH v3 6/7] net: qrtr: Add MHI transport layer
[PATCH v2 0/3] Request direct mapping for modem device
2020-03-30 22:11 UTC (3+ messages)
` [PATCH v2 1/3] dt-bindings: remoteproc: qcom: Add iommus property
[PATCH] ARM: qcom: Add support for IPQ40xx
2020-03-30 22:10 UTC (6+ messages)
[PATCH v2 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390
2020-03-30 21:18 UTC (4+ messages)
` [PATCH v2 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QCA chip QCA6390
[PATCH v2] ARM: qcom: Disable i2c device on gsbi4 for ipq806x
2020-03-30 20:56 UTC
[PATCH] clk: qcom: msm8916: Fix the address location of pll->config_reg
2020-03-30 20:41 UTC (2+ messages)
[PATCH v4 0/4] Add SS/HS-USB changes for Qualcomm SM8150 chipset
2020-03-30 19:36 UTC (5+ messages)
` [PATCH v4 1/4] dt-bindings: phy: Add binding for qcom,usb-hs-7nm
` [PATCH v4 2/4] phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs
` [PATCH v4 3/4] phy: qcom-qmp: Add SM8150 QMP USB3 PHY support
` [PATCH v4 4/4] phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB
[PATCH v10 0/2] Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel
2020-03-30 19:25 UTC (6+ messages)
` [PATCH v10 1/2] dt-bindings: display: add visionox rm69299 panel variant
[PATCH] drm/msm/dpu: ensure device suspend happens during PM sleep
2020-03-30 18:55 UTC (2+ messages)
[PATCH] iommu/arm-smmu: Demote error messages to debug in shutdown callback
2020-03-30 18:24 UTC (8+ messages)
[PATCH V2 0/2] Convert QSPI binding to YAML and add interconnect doc
2020-03-30 18:07 UTC (5+ messages)
` [PATCH V2 1/2] dt-bindings: spi: Convert QSPI bindings to YAML
` [PATCH V2 2/2] dt-bindings: spi: Add interconnect binding for QSPI
[PATCH v4 1/3] phy: add driver for Qualcomm IPQ40xx USB PHY
2020-03-30 16:46 UTC (5+ messages)
` [PATCH v4 2/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document
` [PATCH v4 3/3] ARM: dts: qcom: ipq4019: add USB devicetree nodes
[PATCH v5 1/3] phy: add driver for Qualcomm IPQ40xx USB PHY
2020-03-30 16:43 UTC (3+ messages)
` [PATCH v5 2/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document
` [PATCH v5 3/3] ARM: dts: qcom: ipq4019: add USB devicetree nodes
[RFC v3] pdc: Introduce irq_set_wake call
2020-03-30 16:41 UTC (2+ messages)
` [RFC v3] irqchip: qcom: "
[PATCH 0/3] iio: adc: Add support for QCOM SPMI PMIC7 ADC
2020-03-30 15:38 UTC (8+ messages)
` [PATCH 1/3] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format
` [PATCH 2/3] iio: adc: Add PMIC7 ADC bindings
` [PATCH 3/3] iio: adc: Add support for PMIC7 ADC
[PATCH V4 0/4] Add support for WLED5
2020-03-30 14:45 UTC (7+ messages)
` [PATCH V4 2/4] backlight: qcom-wled: Add callback functions
` [PATCH V4 3/4] backlight: qcom-wled: Add WLED5 bindings
[PATCH v3 0/3] Convert thermal bindings to yaml
2020-03-30 13:07 UTC (6+ messages)
` [PATCH v3 3/3] dt-bindings: thermal: Add yaml bindings for thermal zones
[PATCH 0/3] make dtbs_check cleanups for qcom thermal
2020-03-30 10:06 UTC (4+ messages)
` [PATCH 1/3] arm64: dts: qcom: msm8916: remove unit name for thermal trip points
` [PATCH 2/3] arm64: dts: qcom: msm8996: "
` [PATCH 3/3] arm64: dts: qcom: msm8998: "
[RFC v2] pdc: Introduce irq_set_wake call
2020-03-30 9:39 UTC (8+ messages)
` [RFC v2] irqchip: qcom: "
[PATCH] arm64: dts: qcom: msm8996: Reduce vdd_apc voltage
2020-03-30 9:11 UTC (2+ messages)
[PATCH 0/4] dt-bindings: additionalProperties clean-up
2020-03-30 8:37 UTC (19+ messages)
` [PATCH 1/4] dt-bindings: iio/accel: Drop duplicate adi,adxl345/6 from trivial-devices.yaml
` [PATCH 1/4] dt-bindings: iio/accel: Drop duplicate adi, adxl345/6 "
` [PATCH 3/4] dt-bindings: Clean-up schema errors due to missing 'addtionalProperties: false'
` [PATCH 4/4] dt-bindings: Add missing 'additionalProperties: false'
[PATCH v5 0/2] Add USB DWC3 support for SC7180
2020-03-29 10:27 UTC (3+ messages)
` [PATCH v5 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
[PATCH v3 1/3] phy: add driver for Qualcomm IPQ40xx USB PHY
2020-03-28 13:58 UTC (6+ messages)
` [PATCH v3 3/3] ARM: dts: qcom: ipq4019: add USB devicetree nodes
[PATCH v4] pinctrl: qcom: use scm_call to route GPIO irq to Apps
2020-03-28 1:30 UTC
[PATCH v3] pinctrl: qcom: use scm_call to route GPIO irq to Apps
2020-03-27 23:33 UTC (3+ messages)
[PATCH V2 0/8] Add interconnect support to QSPI and QUP drivers
2020-03-27 23:23 UTC (17+ messages)
` [PATCH V2 1/8] interconnect: Add devm_of_icc_get() as exported API for users
` [PATCH V2 2/8] soc: qcom: geni: Support for ICC voting
` [PATCH V2 3/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
[PATCH v2] pinctrl: qcom: use scm_call to route GPIO irq to Apps
2020-03-27 21:51 UTC (4+ messages)
` R: "
[DPU PATCH v4 0/5] Add support for DisplayPort driver on SnapDragon
2020-03-27 20:33 UTC (8+ messages)
` [DPU PATCH v4 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon
` [DPU PATCH v4 4/5] drm/msm/dp: add support for DP PLL driver
[PATCH v1 0/4] clk: qcom: Support for Low Power Audio Clocks on SC7180
2020-03-27 19:48 UTC (5+ messages)
` [PATCH v1 1/4] clk: qcom: gdsc: Add support to enable retention of GSDCR
` [PATCH v1 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180
` [PATCH v1 3/4] clk: qcom: gcc: Add support for GCC LPASS clock for SC7180
` [PATCH v1 4/4] clk: qcom: lpass: Add support for LPASS clock controller "
[PATCH v14 0/6] Invoke rpmh_flush for non OSI targets
2020-03-27 18:42 UTC (15+ messages)
` [PATCH v14 1/6] arm64: dts: qcom: sc7180: Add cpuidle low power states
` [PATCH v14 2/6] soc: qcom: rpmh: Update dirty flag only when data changes
` [PATCH v14 3/6] soc: qcom: rpmh: Invalidate SLEEP and WAKE TCSes before flushing new data
` [PATCH v14 4/6] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches
` [PATCH v14 5/6] soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS
` [PATCH v14 6/6] soc: qcom: rpmh-rsc: Allow using free WAKE TCS for active request
[PATCH v4 00/16] iommu: Move iommu_fwspec out of 'struct device'
2020-03-27 10:16 UTC (22+ messages)
` [PATCH v4 01/16] iommu: Define dev_iommu_fwspec_get() for !CONFIG_IOMMU_API
` [PATCH v4 02/16] ACPI/IORT: Remove direct access of dev->iommu_fwspec
` [PATCH v4 03/16] drm/msm/mdp5: "
` [PATCH v4 04/16] iommu/tegra-gart: "
` [PATCH v4 05/16] iommu: Rename struct iommu_param to dev_iommu
` [PATCH v4 06/16] iommu: Move iommu_fwspec to struct dev_iommu
` [PATCH v4 07/16] iommu/arm-smmu: Fix uninitilized variable warning
` [PATCH v4 08/16] iommu: Introduce accessors for iommu private data
` [PATCH v4 09/16] iommu/arm-smmu-v3: Use accessor functions "
` [PATCH v4 10/16] iommu/arm-smmu: Refactor master_cfg/fwspec usage
` [PATCH v4 11/16] iommu/arm-smmu: Use accessor functions for iommu private data
` [PATCH v4 12/16] iommu/renesas: "
` [PATCH v4 13/16] iommu/mediatek: "
` [PATCH v4 14/16] iommu/qcom: "
` [PATCH v4 15/16] iommu/virtio: "
` [PATCH v4 16/16] iommu: Move fwspec->iommu_priv to struct dev_iommu
[PATCH v4 0/5] remoteproc: Add elf64 support
2020-03-27 7:37 UTC (4+ messages)
` [PATCH v5 0/8] "
` [PATCH v5 1/8] remoteproc: Use size_t type for len in da_to_va
[PATCH v2 0/3] UFS Clock Scaling fixes and enhancements
2020-03-27 2:18 UTC (2+ messages)
[<PATCH v1> 1/1] scsi: ufs: Resume ufs host before accessing ufs device
2020-03-27 2:11 UTC (2+ messages)
[PATCH v3 0/4] Add SS/HS-USB changes for Qualcomm SM8150 chipset
2020-03-27 0:32 UTC (3+ messages)
` [PATCH v3 4/4] phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB
[PATCH v3 0/3] Allow for rpmpd/rpmh/rpmhpd drivers to be loaded as permenent modules
2020-03-26 23:18 UTC (5+ messages)
` [PATCH v3 1/3] soc: qcom: rpmpd: Allow RPMPD driver to be loaded as a module
` [PATCH v3 2/3] soc: qcom: rpmh: Allow RPMH "
` [PATCH v3 3/3] soc: qcom: rpmhpd: Allow RPMHPD "
[<RFC RESEND PATCH v2> 0/3] WriteBooster Feature Support
2020-03-26 21:53 UTC (2+ messages)
[RFT PATCH v2 00/10] drivers: qcom: rpmh-rsc: Cleanup / add lots of comments
2020-03-26 21:44 UTC (3+ messages)
` [RFT PATCH v2 08/10] drivers: qcom: rpmh-rsc: spin_lock_irqsave() for tcs_invalidate()
[PATCH v9 0/2] Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel
2020-03-26 19:02 UTC (3+ messages)
` [PATCH v9 1/2] dt-bindings: display: add visionox rm69299 panel variant
[RFC v6 0/2] Add SDHC interconnect bandwidth scaling
2020-03-26 18:33 UTC (3+ messages)
[PATCH v13 0/4] Invoke rpmh_flush for non OSI targets
2020-03-26 18:08 UTC (10+ messages)
` [PATCH v13 4/5] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches
` "
[PATCH RESEND v1 0/2] drivers/qcom: add additional functionality to RPMH
2020-03-26 18:07 UTC (3+ messages)
` [PATCH RESEND v1 1/2] drivers: qcom: rpmh-rsc: clear active mode configuration for wake TCS
[PATCH v3 00/15] iommu: Move iommu_fwspec out of 'struct device'
2020-03-26 15:08 UTC (6+ messages)
` [PATCH v3 10/15] iommu/arm-smmu: Use accessor functions for iommu private data
[PATCH 0/4] msm8996 CPU scaling support
2020-03-26 12:00 UTC (5+ messages)
` [PATCH 1/4] soc: qcom: Separate kryo l2 accessors from PMU driver
` [PATCH 2/4] clk: qcom: Add CPU clock driver for msm8996
` [PATCH 3/4] dt-bindings: clk: qcom: Add bindings for CPU clock "
` [PATCH 4/4] arch: arm64: dts: msm8996: Add opp and thermal
[PATCH v8 0/5] usb: xhci: Add support for Renesas USB controllers
2020-03-26 11:51 UTC (6+ messages)
` [PATCH v8 1/5] usb: hci: add hc_driver as argument for usb_hcd_pci_probe
` [PATCH v8 3/5] usb: xhci: Add support for Renesas controller with memory
[PATCH v6] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
2020-03-26 11:23 UTC (5+ messages)
[PATCH 0/2] arm64: dts: msm8916: Conform to updated PSCI bindings
2020-03-26 10:39 UTC (3+ messages)
` [PATCH 1/2] arm64: dts: msm8916: Conform to the domain-idle-state binding
` [PATCH 2/2] arm64: dts: msm8916: Conform to the nodename pattern PSCI subnodes
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).