messages from 2020-03-31 13:20:51 to 2020-04-03 11:17:11 UTC [more...]
[PATCH V4 0/4] Add support for WLED5
2020-04-03 11:17 UTC (7+ messages)
` [PATCH V4 1/4] backlight: qcom-wled: convert the wled bindings to .yaml format
` [PATCH V4 3/4] backlight: qcom-wled: Add WLED5 bindings
[PATCH] arch: arm64: dts: apq8016-dbc: Add missing cpu opps
2020-04-03 10:09 UTC (6+ messages)
[PATCH v2] arch: arm64: dts: msm8916: Add missing cpu opps
2020-04-03 9:53 UTC (4+ messages)
[PATCH v2 00/10] Multiple fixes in PCIe qcom driver
2020-04-03 9:01 UTC (13+ messages)
` [PATCH v2 01/10] PCIe: qcom: add missing ipq806x clocks in PCIe driver
` [PATCH v2 02/10] devicetree: bindings: pci: add missing clks to qcom,pcie
` [PATCH v2 03/10] PCIe: qcom: change duplicate PCI reset to phy reset
` [PATCH v2 04/10] PCIe: qcom: Fixed pcie_phy_clk branch issue
` [PATCH v2 05/10] PCIe: qcom: add missing reset for ipq806x
` [PATCH v2 06/10] devicetree: bindings: pci: add ext reset to qcom,pcie
` [PATCH v2 07/10] PCIe: qcom: fix init problem with missing PARF programming
` [PATCH v2 08/10] PCIe: qcom: add ipq8064 rev2 variant and set tx term offset
` [PATCH v2 09/10] devicetree: bindings: pci: add ipq8064 rev 2 variant to qcom,pcie
` [PATCH v2 10/10] PCIe: qcom: add Force GEN1 support
Update fw file to enable transparent WBS
2020-04-03 8:55 UTC
[PATCH v3] arch: arm64: dts: msm8916: Add missing cpu opps
2020-04-03 8:56 UTC
[PATCH 1/2] phy: qualcomm: add qcom dwc3 phy
2020-04-03 8:40 UTC (3+ messages)
` [PATCH 2/2] devicetree: bindings: phy: Document dwc3 qcom phy
[PATCH v5 0/3] Convert thermal bindings to yaml
2020-04-03 7:01 UTC (4+ messages)
` [PATCH v5 1/3] dt-bindings: thermal: Add yaml bindings for thermal sensors
` [PATCH v5 2/3] dt-bindings: thermal: Add yaml bindings for thermal cooling-devices
` [PATCH v5 3/3] dt-bindings: thermal: Add yaml bindings for thermal zones
[PATCH v5 0/5] Add SS/HS-USB changes for Qualcomm SM8150 chipset
2020-04-03 6:01 UTC (7+ messages)
` [PATCH v5 1/5] dt-bindings: phy: Add binding for qcom,usb-snps-femto-v2
` [PATCH v5 2/5] phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs
` [PATCH v5 3/5] phy: qcom-qmp: Add SM8150 QMP USB3 PHY support
` [PATCH v5 4/5] phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB
` [PATCH v5 5/5] phy: qcom-qmp: Rename UFS PCS QMP v4 registers
[PATCH v2] ARM: qcom: Disable i2c device on gsbi4 for ipq806x
2020-04-03 1:39 UTC (3+ messages)
` R: "
[PATCH v4 0/4] Add SS/HS-USB changes for Qualcomm SM8150 chipset
2020-04-03 0:32 UTC (10+ messages)
` [PATCH v4 2/4] phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs
` [PATCH v4 3/4] phy: qcom-qmp: Add SM8150 QMP USB3 PHY support
` [PATCH v4 4/4] phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB
[PATCH v5 0/9] Add QUSB2 PHY support for SC7180
2020-04-02 23:54 UTC (13+ messages)
` [PATCH v5 3/9] phy: qcom-qusb2: Add generic QUSB2 V2 PHY support
` [PATCH] phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string
` [PATCH v2] "
[RFT PATCH v2 00/10] drivers: qcom: rpmh-rsc: Cleanup / add lots of comments
2020-04-02 20:19 UTC (19+ messages)
` [RFT PATCH v2 01/10] drivers: qcom: rpmh-rsc: Clean code reading/writing regs/cmds
` [RFT PATCH v2 02/10] drivers: qcom: rpmh-rsc: Document the register layout better
` [RFT PATCH v2 03/10] drivers: qcom: rpmh-rsc: Fold tcs_ctrl_write() into its single caller
` [RFT PATCH v2 04/10] drivers: qcom: rpmh-rsc: Remove get_tcs_of_type() abstraction
` [RFT PATCH v2 05/10] drivers: qcom: rpmh-rsc: A lot of comments
` [RFT PATCH v2 06/10] drivers: qcom: rpmh-rsc: Comment tcs_is_free() + warn if state mismatch
` [RFT PATCH v2 07/10] drivers: qcom: rpmh-rsc: Warning if tcs_write() used for non-active
[PATCH v15 0/7] Invoke rpmh_flush for non OSI targets
2020-04-02 20:14 UTC (10+ messages)
` [PATCH v15 2/7] soc: qcom: rpmh: Update dirty flag only when data changes
` [PATCH v15 4/7] soc: qcom: rpmh-rsc: Save base address of drv
` [PATCH v15 5/7] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches
` [PATCH v15 6/7] soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS
` [PATCH v15 7/7] soc: qcom: rpmh-rsc: Allow using free WAKE TCS for active request
[PATCH 0/6] remoteproc: qcom: Add callbacks for remoteproc events
2020-04-02 17:47 UTC (11+ messages)
` [PATCH 6/6] remoteproc: qcom: Add notification types to SSR
[PATCH V3 0/8] Add interconnect support to QSPI and QUP drivers
2020-04-02 13:46 UTC (17+ messages)
` [PATCH V3 2/8] soc: qcom: geni: Support for ICC voting
` [PATCH V3 3/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
` [PATCH V3 4/8] i2c: i2c-qcom-geni: Add interconnect support
` [PATCH V3 5/8] spi: spi-geni-qcom: "
` [PATCH V3 6/8] tty: serial: qcom_geni_serial: "
` [PATCH V3 7/8] spi: spi-qcom-qspi: "
[v3 1/3] [Do not pick] drm/msm/dpu: add support for clk and bw scaling for display
2020-04-02 13:30 UTC (3+ messages)
` [v3 2/3] arm64: dts: sc7180: add bus clock to mdp node for sc7180 target
` [v3 3/3] arm64: dts: sc7180: add interconnect bindings for display
[PATCH] media: venus: Add platform specific capabilities
2020-04-02 7:28 UTC
[v2 1/3] drm/msm/dpu: add support for clk and bw scaling for display
2020-04-02 6:52 UTC (3+ messages)
` [v2 2/3] arm64: dts: sc7180: add bus clock to mdp node for sc7180 target
` [v2 3/3] arm64: dts: sc7180: add interconnect bindings for display
[PATCH] iommu/qcom:fix local_base status check
2020-04-02 6:45 UTC (2+ messages)
[PATCH v5 0/3] Add QMP V3 USB3 PHY support for SC7180
2020-04-02 6:38 UTC (4+ messages)
` [PATCH v5 1/3] dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml
` [PATCH v5 2/3] dt-bindings: phy: qcom,qmp: Add support for SC7180
` [PATCH v5 3/3] phy: qcom-qmp: Add QMP V3 USB3 PHY "
[PATCH v2]iommu/qcom:fix local_base status check
2020-04-02 6:15 UTC (2+ messages)
[PATCH v2 0/3] MHI bus improvements - Part 2
2020-04-02 5:55 UTC (6+ messages)
` [PATCH v2 1/3] bus: mhi: core: Add support for MHI suspend and resume
` [PATCH v2 2/3] net: qrtr: Add MHI transport layer
` [PATCH v2 3/3] net: qrtr: Do not depend on ARCH_QCOM
[PATCH 01/12] pcie: qcom: add missing ipq806x clocks in pcie driver
2020-04-01 23:52 UTC (20+ messages)
` [PATCH 02/12] devicetree: bindings: pci: add missing clks to qcom,pcie
` [PATCH 06/12] devicetree: bindings: pci: add ext reset "
` [PATCH 07/12] pcie: qcom: add tx term offset support
` R: "
` [PATCH 08/12] devicetree: bindings: pci: add phy-tx0-term-offset to qcom,pcie
` R: "
` [PATCH 09/12] pcie: qcom: Programming the PCIE iATU for IPQ806x
` [PATCH 11/12] devicetree: bindings: pci: add force_gen1 for qcom,pcie
` R: "
[PATCH] iommu/qcom:fix local_base status check
2020-04-01 23:36 UTC (2+ messages)
[v1 2/3] arm64: dts: sc7180: add bus clock to mdp node for sc7180 target
2020-04-01 21:29 UTC (3+ messages)
` [v1 3/3] arm64: dts: sc7180: define interconnects "
[PATCH v6 1/3] phy: add driver for Qualcomm IPQ40xx USB PHY
2020-04-01 16:35 UTC (3+ messages)
` [PATCH v6 2/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document
` [PATCH v6 3/3] ARM: dts: qcom: ipq4019: add USB devicetree nodes
[PATCH v5 1/3] phy: add driver for Qualcomm IPQ40xx USB PHY
2020-04-01 16:27 UTC (6+ messages)
` [PATCH v5 2/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document
[PATCH v8 0/5] usb: xhci: Add support for Renesas USB controllers
2020-04-01 16:18 UTC (7+ messages)
` [PATCH v8 3/5] usb: xhci: Add support for Renesas controller with memory
[PATCH] dt-bindings: thermal: Get rid of thermal.txt and replace references
2020-04-01 15:05 UTC
[PATCH v4 0/3] Convert thermal bindings to yaml
2020-04-01 13:38 UTC (8+ messages)
` [PATCH v4 1/3] dt-bindings: thermal: Add yaml bindings for thermal sensors
` [PATCH v4 2/3] dt-bindings: thermal: Add yaml bindings for thermal cooling-devices
` [PATCH v4 3/3] dt-bindings: thermal: Add yaml bindings for thermal zones
[PULL] btqca firmware 20200401
2020-04-01 12:38 UTC
[PATCH 0/5] Add support for GPU DDR BW scaling
2020-04-01 12:30 UTC (6+ messages)
` [PATCH 3/5] drm: msm: scale DDR BW along with GPU frequency
` [PATCH 4/5] drm: msm: a6xx: Fix off by one error when setting GPU freq
[PATCH v5 0/5] Add support for devices in the Energy Model
2020-04-01 10:49 UTC (5+ messages)
` [PATCH v5 2/5] OPP: refactor dev_pm_opp_of_register_em() and update related drivers
` [PATCH v5 4/5] thermal: devfreq_cooling: Refactor code and switch to use Energy Model
[PATCH] drm/msm/dpu: ensure device suspend happens during PM sleep
2020-04-01 9:32 UTC (3+ messages)
[PATCH] drm/msm/dpu: add support for clk and bw scaling for display
2020-04-01 8:48 UTC
[PATCH][next] media: venus: hfi_msgs.h: Replace zero-length array with flexible-array member
2020-04-01 8:38 UTC (2+ messages)
[PATCH][next] media: venus: hfi_cmds.h: Replace zero-length array with flexible-array member
2020-04-01 8:37 UTC (2+ messages)
[PATCH 0/3] MHI bus improvements - Part 2
2020-04-01 8:20 UTC (6+ messages)
` [PATCH 1/3] bus: mhi: core: Add support for MHI suspend and resume
` [PATCH 2/3] net: qrtr: Add MHI transport layer
` [PATCH 3/3] net: qrtr: Do not depend on ARCH_QCOM
[DPU PATCH v5 0/5] Add support for DisplayPort driver on SnapDragon
2020-04-01 5:49 UTC (6+ messages)
` [DPU PATCH v5 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon
` [DPU PATCH v5 2/5] drm: add constant N value in helper file
` [DPU PATCH v5 4/5] drm/msm/dp: add support for DP PLL driver
` [DPU PATCH v5 5/5] drm/msm/dpu: add display port support in DPU
[PATCH v7 0/4] ADD interconnect support for Qualcomm DWC3 driver
2020-04-01 5:15 UTC (5+ messages)
` [PATCH v7 1/4] dt-bindings: usb: qcom,dwc3: Introduce interconnect properties "
` [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
` [PATCH v7 3/4] arm64: dts: qcom: sdm845: Add interconnect properties for USB
` [PATCH v7 4/4] arm64: dts: qcom: sc7180: "
[PATCH v3 0/3] Convert thermal bindings to yaml
2020-03-31 21:20 UTC (12+ messages)
` [PATCH v3 1/3] dt-bindings: thermal: Add yaml bindings for thermal sensors
` [PATCH v3 2/3] dt-bindings: thermal: Add yaml bindings for thermal cooling-devices
` [PATCH v3 3/3] dt-bindings: thermal: Add yaml bindings for thermal zones
[PATCH 1/2] dt-bindings: thermal: tsens: Fix nvmem-cell-names schema
2020-03-31 21:09 UTC (4+ messages)
` [PATCH 2/2] dt-bindings: thermal: tsens: Set 'additionalProperties: false'
[PATCH 0/3] iio: adc: Add support for QCOM SPMI PMIC7 ADC
2020-03-31 20:06 UTC (3+ messages)
` [PATCH 3/3] iio: adc: Add support for "
[PATCH v7] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
2020-03-31 18:40 UTC (6+ messages)
[PATCH 1/2] docs: dt: qcom,dwc3.txt: fix cross-reference for a converted file
2020-03-31 17:42 UTC (2+ messages)
[PATCH v3 0/7] Improvements to MHI Bus
2020-03-31 17:40 UTC (9+ messages)
` [PATCH v3 6/7] net: qrtr: Add MHI transport layer
[PATCH] arm64: dts: sc7180: Swap order of gpucc and sdhc_2
2020-03-31 16:56 UTC (2+ messages)
[PATCH v10 0/2] Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel
2020-03-31 16:39 UTC (5+ messages)
[PATCH v6 0/4] ADD interconnect support for Qualcomm DWC3 driver
2020-03-31 16:11 UTC (8+ messages)
` [PATCH v6 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
[PATCH 0/4] dt-bindings: additionalProperties clean-up
2020-03-31 14:48 UTC (8+ messages)
` [PATCH 1/4] dt-bindings: iio/accel: Drop duplicate adi,adxl345/6 from trivial-devices.yaml
` [PATCH 1/4] dt-bindings: iio/accel: Drop duplicate adi, adxl345/6 "
` [PATCH 4/4] dt-bindings: Add missing 'additionalProperties: false'
[PATCH] pinctrl: qcom: fix compilation error
2020-03-31 14:45 UTC (2+ messages)
[PATCH] drm/msm/dpu: ensure device suspend happens during PM sleep
2020-03-31 14:05 UTC (3+ messages)
` [Freedreno] "
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).