messages from 2020-05-31 17:29:08 to 2020-06-04 07:38:48 UTC [more...]
[PATCH 0/3] Add LT9611 DSI to HDMI bridge
2020-06-04 7:38 UTC (9+ messages)
` [PATCH 2/3] dt-bindings: display: bridge: Add documentation for LT9611
` [PATCH 3/3] drm/bridge: Introduce LT9611 DSI to HDMI bridge
[PATCH 0/2] coresight: tmc: Add shutdown callback for TMC ETR/ETF
2020-06-04 7:27 UTC (26+ messages)
` [PATCH 1/2] coresight: tmc: Add enable flag to indicate the status of ETR/ETF
` [PATCH 2/2] coresight: tmc: Add shutdown callback for TMC ETR/ETF
[PATCH] scsi: ufs: Bump supported UFS HCI version to 3.0
2020-06-04 6:35 UTC
[PATCH 1/7] arm64: dts: qcom: pm8009: Add base dts file
2020-06-04 6:09 UTC (11+ messages)
` [PATCH 2/7] arm64: dts: qcom: sm8250: change spmi node label
` [PATCH 3/7] arm64: dts: qcom: sm8250-mtp: include pmic files
` [PATCH 4/7] arm64: dts: qcom: sm8x50: add empty thermal zone nodes
` [PATCH 5/7] arm64: dts: qcom: pm8150x: add thermal alarms and thermal zones
` [PATCH 6/7] arm64: dts: qcom: pm8150: enable rtc device
` [PATCH 7/7] arm64: dts: qcom: sm8250: add watchdog device
[PATCH] pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
2020-06-04 5:58 UTC (2+ messages)
[PATCH v6 0/6] Introduce Power domain based warming device driver
2020-06-04 1:53 UTC (7+ messages)
` [PATCH v6 1/6] PM/Domains: Add support for retrieving genpd performance states information
` [PATCH v6 2/6] soc: qcom: rpmhpd: Introduce function to retrieve power domain performance state count
` [PATCH v6 3/6] thermal: Add generic power domain warming device driver
` [PATCH v6 4/6] soc: qcom: Extend RPMh power controller driver to register warming devices
` [PATCH v6 5/6] dt-bindings: power: Extend RPMh power controller binding to describe thermal warming device
` [PATCH v6 6/6] arm64: dts: qcom: Indicate rpmhpd hosts a power domain that can be used as a "
[PATCH 4/4] arm64: dts: ipq6018: Add support for apcs clk
2020-06-04 0:19 UTC (2+ messages)
[v4] dt-bindings: msm: disp: add yaml schemas for DPU and DSI bindings
2020-06-03 22:45 UTC (2+ messages)
[PATCH 1/2] remoteproc: qcom: q6v5: Update running state before requesting stop
2020-06-03 22:33 UTC (6+ messages)
` [PATCH 2/2] remoteproc: qcom_q6v5_mss: Remove redundant running state
[PATCH] iommu/arm-smmu: Mark qcom_smmu_client_of_match as possibly unused
2020-06-03 21:15 UTC
[PATCH 00/10] Enable GPU for SM8150 and SM8250
2020-06-03 18:20 UTC (7+ messages)
` [PATCH 08/10] clk: qcom: Add graphics clock controller driver for SM8250
[PATCH v7 0/4] ADD interconnect support for Qualcomm DWC3 driver
2020-06-03 17:36 UTC (3+ messages)
` [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
[RFC 0/2] iommu: arm-smmu: Add support for early direct mappings
2020-06-03 17:23 UTC (12+ messages)
[PATCH V1 0/2] Add SDHC interconnect bandwidth scaling
2020-06-03 15:30 UTC (5+ messages)
` [PATCH V1 1/2] mmc: sdhci-msm: Add interconnect bandwidth scaling support
` [PATCH V1 2/2] dt-bindings: mmc: sdhci-msm: Add interconnect BW scaling strings
[PATCH v6 1/2] phy: qualcomm: add qcom ipq806x dwc usb phy driver
2020-06-03 13:22 UTC (2+ messages)
` [PATCH v6 2/2] devicetree: bindings: phy: Document ipq806x dwc3 qcom phy
[PATCH 1/9] drm/msm: Don't call dma_buf_vunmap without _vmap
2020-06-03 12:46 UTC (4+ messages)
` [PATCH] "
[PATCH v2 0/4] irqchip: qcom: pdc: Introduce irq_set_wake call
2020-06-03 12:28 UTC (9+ messages)
` [PATCH v2 1/4] gpio: gpiolib: Allow GPIO IRQs to lazy disable
` [PATCH v2 4/4] irqchip: qcom-pdc: Introduce irq_set_wake call
[PATCH V6 0/5] Add APSS clock controller support for IPQ6018
2020-06-03 5:31 UTC (7+ messages)
` [PATCH V6 4/5] clk: qcom: Add ipq6018 apss clock controller
[pull v2] drm/msm: msm-next for 5.8
2020-06-03 0:50 UTC
[PATCH 0/4] Add msm8992 GCC driver
2020-06-02 23:33 UTC (8+ messages)
` [PATCH 1/4] drivers: clk: qcom: "
` [PATCH 2/4] Add compatible strings and the include files for the msm8992 GCC
` [PATCH 3/4] arm64: dts: Adjust msm8992 DTS to use the correct GCC driver
` [PATCH 4/4] driver: clk: Add msm8992 GCC Kconfig and Makefile entries
[PATCH v2 00/33] iommu: Move iommu_group setup to IOMMU core code
2020-06-02 21:17 UTC (10+ messages)
[PATCH 1/1] soc: qcom: socinfo: Add msm8992/4 and apq8094 SoC IDs
2020-06-02 20:12 UTC
[PATCH 1/1] Documentation: Document an existing qcom,rpm-msm8996 compatible
2020-06-02 20:08 UTC
[PATCH 1/1] soc: qcom: smd-rpm: Add msm8994 compatible
2020-06-02 20:05 UTC (2+ messages)
[PATCH] driver core:Export the symbol device_is_bound
2020-06-02 18:39 UTC
[PATCH v5 00/11] Multiple fixes in PCIe qcom driver
2020-06-02 17:28 UTC (15+ messages)
` [PATCH v5 01/11] PCI: qcom: Add missing ipq806x clocks in PCIe driver
` [PATCH v5 02/11] dt-bindings: PCI: qcom: Add missing clks
` [PATCH v5 03/11] PCI: qcom: Change duplicate PCI reset to phy reset
` [PATCH v5 04/11] PCI: qcom: Add missing reset for ipq806x
` [PATCH v5 05/11] dt-bindings: PCI: qcom: Add ext reset
` [PATCH v5 06/11] PCI: qcom: Use bulk clk api and assert on error
` [PATCH v5 07/11] PCI: qcom: Define some PARF params needed for ipq8064 SoC
` [PATCH v5 08/11] PCI: qcom: Add support for tx term offset for rev 2.1.0
` [PATCH v5 09/11] PCI: qcom: Add ipq8064 rev2 variant
` [PATCH v5 10/11] dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant
` [PATCH v5 11/11] PCI: qcom: Add Force GEN1 support
` R: "
[v2] drm/msm: add shutdown support for display platform_driver
2020-06-02 16:10 UTC (5+ messages)
[PATCH v3 0/16] backlight updates
2020-06-02 14:04 UTC (22+ messages)
` [PATCH v3 01/13] backlight: refactor fb_notifier_callback()
` [PATCH v3 02/13] backlight: add backlight_is_blank()
` [PATCH v3 03/13] backlight: improve backlight_ops documentation
` [PATCH v3 04/13] backlight: improve backlight_properties documentation
` [PATCH v3 05/13] backlight: improve backlight_device documentation
` [PATCH v3 06/13] backlight: document inline functions in backlight.h
` [PATCH v3 07/13] backlight: document enums "
` [PATCH v3 08/13] backlight: remove the unused backlight_bl driver
` [PATCH v3 09/13] backlight: drop extern from prototypes
` [PATCH v3 10/13] backlight: add overview and update existing doc
` [PATCH v3 11/13] backlight: wire up kernel-doc documentation
` [PATCH v3 12/13] backlight: as3711_bl: introduce backlight_is_blank()
` [PATCH v3 13/13] backlight: use backlight_is_blank() in all backlight drivers
[PATCH] pinctrl: msm: Add check for pinctrl group is valid
2020-06-02 12:26 UTC (4+ messages)
[PATCH v4 0/5] Qualcomm labibb regulator driver
2020-06-02 12:25 UTC (12+ messages)
` [PATCH v4 1/5] regulator: Allow regulators to verify enabled during enable()
` [PATCH v4 2/5] dt-bindings: regulator: Add labibb regulator
` [PATCH v4 3/5] arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
` [PATCH v4 4/5] regulator: qcom: Add labibb driver
` [PATCH v4 5/5] regulator: qcom: labibb: Add SC interrupt handling
[PATCH v8 0/8] Add support for devices in the Energy Model
2020-06-02 11:31 UTC (7+ messages)
` [PATCH v8 3/8] PM / EM: update callback structure and add device pointer
` [PATCH v8 4/8] PM / EM: add support for other devices than CPUs in Energy Model
[PATCH V1 0/3] Internal voltage control for qcom SDHC
2020-06-02 10:47 UTC (5+ messages)
` [PATCH V3 "
` [PATCH V3 1/3] dt-bindings: mmc: Supply max load for mmc supplies
` [PATCH V3 2/3] mmc: sdhci: Allow platform controlled voltage switching
` [PATCH V3 3/3] mmc: sdhci-msm: Use internal voltage control
[PATCH v4 00/10] Multiple fixes in PCIe qcom driver
2020-06-02 9:34 UTC (14+ messages)
` [PATCH v4 01/10] PCI: qcom: Add missing ipq806x clocks in PCIe driver
` [PATCH v4 06/10] PCI: qcom: Use bulk clk api and assert on error
` [PATCH v4 07/10] PCI: qcom: Define some PARF params needed for ipq8064 SoC
` [PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and set tx term offset
` R: "
` [PATCH v4 10/10] PCI: qcom: Add Force GEN1 support
[PATCH v5 0/5] DDR/L3 Scaling support on SDM845 and SC7180 SoCs
2020-06-02 6:57 UTC (6+ messages)
` [PATCH v5 4/5] cpufreq: qcom: Update the bandwidth levels on frequency change
[PATCH] Revert "drm/msm/dpu: add support for clk and bw scaling for display"
2020-06-02 3:58 UTC
[RFC PATCH] media: venus: Fix NULL pointer dereference in core selection
2020-06-02 3:39 UTC (2+ messages)
[PATCH V2] venus: fix multiple encoder crash
2020-06-02 3:37 UTC (2+ messages)
[PATCHv2] coresight: tmc: Add shutdown callback for TMC ETR/ETF
2020-06-01 17:24 UTC
[4.19.124 V1] mmc: core: Fix recursive locking issue in CQE recovery path
2020-06-01 11:11 UTC (2+ messages)
[PATCH] OPP: Check for bandwidth values before creating icc paths
2020-06-01 10:24 UTC (9+ messages)
[PATCH v5] bluetooth: hci_qca: Fix QCA6390 memdump failure
2020-06-01 6:08 UTC (2+ messages)
[PATCH v4] Bluetooth: hci_qca: Improve controller ID info log level
2020-06-01 6:04 UTC (2+ messages)
[PATCH v2] dt-bindings: media: venus: Add an optional power domain for perf voting
2020-06-01 5:56 UTC (3+ messages)
[PATCH 00/14] msm8992 DTS updates, peripheral enablement
2020-05-31 17:27 UTC (6+ messages)
` [PATCH 01/14] arm64: dts: Add a proper CPU map for MSM8992
` [PATCH 03/14] arm64: dts: msm8992: Add a SCM node
` [PATCH 04/14] firmware: qcom_scm: Add msm8992 compatible
` [PATCH 05/14] Documentation: Document msm8992 qcom_scm compatible
` [PATCH 06/14] arm64: dts: msm8992: Add a spmi_bus node
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).