messages from 2020-06-17 20:24:53 to 2020-06-20 16:27:30 UTC [more...]
[PATCH] drm/msm/dpu: Fix usage of ERR_PTR()
2020-06-20 16:27 UTC (3+ messages)
[PATCH v12] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
2020-06-20 15:57 UTC
[PATCH 00/21] MSM8994 peripheral enablement, DTS updates
2020-06-20 14:46 UTC (22+ messages)
` [PATCH 01/21] clk: qcom: smd: Add support for MSM8992/4 rpm clocks
` [PATCH 02/21] arm64: dts: qcom: msm8994: Add SPMI PMIC arbiter device
` [PATCH 03/21] arm64: dts: qcom: msm8994: Add a proper CPU map
` [PATCH 04/21] arm64: dts: qcom: msm8994: Wrap clock nodes into clocks {}
` [PATCH 05/21] arm64: dts: qcom: msm8994: Rename the smem node and remove its unit address
` [PATCH 06/21] arm64: dts: qcom: msm8994: Rename clock_gcc label to gcc
` [PATCH 07/21] arm64: dts: qcom: msm8994: Add apcs node
` [PATCH 08/21] arm64: dts: qcom: msm8994: Add pmu node
` [PATCH 09/21] arm64: dts: qcom: msm8994: Add PSCI node
` [PATCH 10/21] arm64: dts: qcom: msm8994: Add support for SMD RPM
` [PATCH 11/21] arm64: dts: qcom: msm8994: Add SDHCI1 node
` [PATCH 12/21] arm64: dts: qcom: msm8994: Remove qcom,msm-id and qcom-pmic-id properties
` [PATCH 13/21] arm64: dts: qcom: msm8994: Make comments C style
` [PATCH 14/21] arm64: dts: qcom: msm8994: Add SCM node
` [PATCH 15/21] arm64: dts: qcom: msm8994: Add BLSP2 UART2 node
` [PATCH 16/21] arm64: dts: qcom: msm8994: Add I2C, SPI and BLSP DMA nodes
` [PATCH 17/21] arm64: dts: qcom: Update msm8994 pin configuration
` [PATCH 18/21] regulator: qcom_smd: Fix pmi8994 label
` [PATCH 19/21] arm64: dts: qcom: angler: Add qcom,msm-id and pmic-id
` [PATCH 20/21] arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
` [PATCH 21/21] arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead
[PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
2020-06-20 14:44 UTC (4+ messages)
[PATCH v3 0/3] Add LT9611 DSI to HDMI bridge
2020-06-20 2:32 UTC (2+ messages)
[PATCH V7 0/4] Add APSS clock controller support for IPQ6018
2020-06-20 2:26 UTC (8+ messages)
` [PATCH V7 1/4] dt-bindings: clock: add ipq6018 a53 pll compatible
` [PATCH V7 3/4] clk: qcom: Add DT bindings for ipq6018 apss clock controller
[PATCH v1 0/2] Some small spi geni cleanups
2020-06-20 2:22 UTC (3+ messages)
` [PATCH v1 1/2] spi: spi-geni-qcom: Simplify setup_fifo_xfer()
` [PATCH v1 2/2] spi: spi-geni-qcom: Don't set {tx,rx}_rem_bytes unnecessarily
[PATCH v4 0/5] spi: spi-geni-qcom: Fixes / perf improvements
2020-06-20 2:16 UTC (23+ messages)
` [PATCH v4 1/5] spi: spi-geni-qcom: No need for irqsave variant of spinlock calls
` [PATCH v4 2/5] spi: spi-geni-qcom: Mo' betta locking
` [PATCH v4 3/5] spi: spi-geni-qcom: Check for error IRQs
` [PATCH v4 4/5] spi: spi-geni-qcom: Actually use our FIFO
` [PATCH v4 5/5] spi: spi-geni-qcom: Don't keep a local state variable
` [PATCH 6/5] spi: spi-geni-qcom: Simplify setup_fifo_xfer()
` [PATCH 7/5] spi: spi-geni-qcom: Don't set {tx,rx}_rem_bytes unnecessarily
[PATCH v3 0/4] clk: qcom: Support for Low Power Audio Clocks on SC7180
2020-06-20 0:30 UTC (4+ messages)
` [PATCH v3 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks "
[PATCH v2 0/4] msm8996 CPU scaling support
2020-06-20 0:27 UTC (7+ messages)
` [PATCH v2 1/4] soc: qcom: Separate kryo l2 accessors from PMU driver
` [PATCH v2 2/4] clk: qcom: Add CPU clock driver for msm8996
` [PATCH v2 3/4] dt-bindings: clk: qcom: Add bindings for CPU clock "
[PATCH 0/2] ASoC: qcom: add apq8039 sound card and bindings
2020-06-19 21:58 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: sound: Device tree bindings for the apq8039 sound complex
` [PATCH 2/2] ASoC: qcom: add apq8039 sound card support
[PATCH v2] arm64: dts: qcom: sc7180: Add Display Port dt node
2020-06-19 21:55 UTC (3+ messages)
[PATCH 0/4] Add two new v4l controls and implementation
2020-06-19 18:48 UTC (4+ messages)
` [PATCH 3/4] v4l2-ctrl: Add control for intra only decode
[PATCH v7 13/36] drm: msm: fix common struct sg_table related issues
2020-06-19 14:45 UTC (2+ messages)
[PATCH 0/6] Add frequency and voltage scaling support for IPQ6018 SoC
2020-06-19 10:41 UTC (8+ messages)
` [PATCH 1/6] dt-bindings: soc: qcom: add YAML schema for SMD-RPM driver
` [PATCH 2/6] dt-bindings: soc: qcom: Add IPQ6018 compatible
` [PATCH 3/6] soc: qcom: smd-rpm: "
` [PATCH 4/6] dt-bindings: regulator: add YAML schema for QCOM SMD-RPM regulator
` [PATCH 5/6] dt-bindings: add MP5496 regulator compatible
` [PATCH 6/6] regulator: qcom_smd: Add MP5496 regulators
[PATCH v3 0/4] user space client interface driver
2020-06-19 10:40 UTC (9+ messages)
` [PATCH v3 1/4] bus: mhi: core: Add helper API to return number of free TREs
` [PATCH v3 2/4] bus: mhi: core: Move MHI_MAX_MTU to external header file
` [PATCH v3 3/4] docs: Add documentation for user space client interface
` [PATCH v3 4/4] bus: mhi: clients: Add user space client interface driver
[PATCH] spi: spidev: fix missing octal defines
2020-06-19 10:23 UTC (2+ messages)
[PATCH v2 0/4] irqchip: qcom: pdc: Introduce irq_set_wake call
2020-06-19 9:26 UTC (9+ messages)
` [PATCH v2 4/4] irqchip: qcom-pdc: "
[PATCH v3 0/4] nvmem: qfprom: Patches for fuse blowing on Qualcomm SoCs
2020-06-19 9:22 UTC (12+ messages)
` [PATCH v3 1/4] dt-bindings: nvmem: qfprom: Convert to yaml
` [PATCH v3 2/4] dt-bindings: nvmem: Add properties needed for blowing fuses
[PATCH] soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write()
2020-06-19 8:23 UTC (2+ messages)
[PATCH] soc: qcom: rpmh: Update rpmh_invalidate function to return void
2020-06-19 8:20 UTC (3+ messages)
[PATCH V2] pinctrl: qcom: ipq6018 Add missing pins in qpic pin group
2020-06-19 4:31 UTC
[PATCH] soc: qcom: rpmh: Remove serialization of TCS commands
2020-06-19 4:27 UTC (2+ messages)
[PATCH V3 0/5] Enable USB support in IPQ8074
2020-06-19 3:20 UTC (6+ messages)
` [PATCH V3 4/5] phy: qcom-qusb2: Add ipq8074 device compatible
[PATCH v4 0/5] Qualcomm labibb regulator driver
2020-06-18 23:44 UTC (3+ messages)
` [PATCH v4 1/5] regulator: Allow regulators to verify enabled during enable()
[PATCH] PCI: qcom: Disable power management for uPD720201 USB3 controller
2020-06-18 23:20 UTC (2+ messages)
[PATCH v7 0/6] Add support for DisplayPort driver on SnapDragon
2020-06-18 22:26 UTC (6+ messages)
` [PATCH v7 1/6] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon
` [PATCH v7 2/6] drm: add constant N value in helper file
` [PATCH v7 4/6] drm/msm/dp: add support for DP PLL driver
` [PATCH v7 5/6] drm/msm/dpu: add display port support in DPU
` [PATCH v7 6/6] drm/msm/dp: Add Display Port HPD feature
[PATCH v3 0/6] Introduce PMIC based USB type C detection
2020-06-18 22:23 UTC (5+ messages)
` [PATCH v3 2/6] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding
[v3] drm/bridge: ti-sn65dsi86: ensure bridge suspend happens during PM sleep
2020-06-18 22:09 UTC (2+ messages)
[PATCH] soc: qcom: rpmh-rsc: Don't use ktime for timeout in write_tcs_reg_sync()
2020-06-18 21:52 UTC (2+ messages)
[PATCH] driver core:Export the symbol device_is_bound
2020-06-18 21:45 UTC (7+ messages)
[PATCH v3 0/6] Add support for GPU DDR BW scaling
2020-06-18 17:52 UTC (3+ messages)
` [PATCH v3 2/6] drm: msm: a6xx: send opp instead of a frequency
[PATCH 14/29] dt: Fix broken references to renamed docs
2020-06-18 17:06 UTC (2+ messages)
[PATCH v6 0/5] DDR/L3 Scaling support on SDM845 and SC7180 SoCs
2020-06-18 17:05 UTC (7+ messages)
` [PATCH v6 4/5] cpufreq: qcom: Update the bandwidth levels on frequency change
[PATCH v2 0/8] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts
2020-06-18 16:56 UTC (5+ messages)
` [PATCH v2 1/8] dt-bindings: arm-smmu: Add sm8150 and sm8250 compatible strings
` [PATCH v2 2/8] iommu: arm-smmu-impl: Use qcom impl for sm8150 and sm8250 compatibles
[PATCH v3 0/5] spi: spi-geni-qcom: Fixes / perf improvements
2020-06-18 16:48 UTC (15+ messages)
` [PATCH v3 1/5] spi: spi-geni-qcom: No need for irqsave variant of spinlock calls
` [PATCH v3 2/5] spi: spi-geni-qcom: Mo' betta locking
` [PATCH v3 3/5] spi: spi-geni-qcom: Check for error IRQs
` [PATCH v3 4/5] spi: spi-geni-qcom: Actually use our FIFO
` [PATCH v3 5/5] spi: spi-geni-qcom: Don't keep a local state variable
[PATCH v6 13/36] drm: msm: fix common struct sg_table related issues
2020-06-18 15:39 UTC
[PATCH v6 0/6] DVFS for IO devices on sdm845 and sc7180
2020-06-18 14:54 UTC (8+ messages)
` [PATCH v6 5/6] media: venus: core: Add support for opp tables/perf voting
[v1] drm/msm/dpu: add support for clk and bw scaling for display
2020-06-18 14:08 UTC
[v8] drm/msm/dpu: ensure device suspend happens during PM sleep
2020-06-18 14:01 UTC
[PATCH] arm64: dts: msm8916: Add interconnect provider DT nodes
2020-06-18 9:02 UTC (2+ messages)
[PATCH V1 0/3] Internal voltage control for qcom SDHC
2020-06-18 6:30 UTC (7+ messages)
` [PATCH V4 0/2] "
` [PATCH V4 2/2] mmc: sdhci-msm: Use internal voltage control
[RESEND PATCH] drm/msm/dpu: fix error return code in dpu_encoder_init
2020-06-18 6:28 UTC
[PATCH AUTOSEL 5.7 011/388] clk: qcom: msm8916: Fix the address location of pll->config_reg
2020-06-18 1:06 UTC (16+ messages)
` [PATCH AUTOSEL 5.7 038/388] remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
` [PATCH AUTOSEL 5.7 061/388] arm64: dts: qcom: sc7180: Correct the pdc interrupt ranges
` [PATCH AUTOSEL 5.7 121/388] arm64: dts: qcom: msm8916: remove unit name for thermal trip points
` [PATCH AUTOSEL 5.7 133/388] arm64: dts: qcom: fix pm8150 gpio interrupts
` [PATCH AUTOSEL 5.7 134/388] firmware: qcom_scm: fix bogous abuse of dma-direct internals
` [PATCH AUTOSEL 5.7 135/388] arm64: dts: qcom: sm8250: Fix PDC compatible and reg
` [PATCH AUTOSEL 5.7 147/388] slimbus: ngd: get drvdata from correct device
` [PATCH AUTOSEL 5.7 185/388] arm64: dts: msm8996: Fix CSI IRQ types
` [PATCH AUTOSEL 5.7 197/388] remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space
` [PATCH AUTOSEL 5.7 201/388] arm64: dts: qcom: db820c: Fix invalid pm8994 supplies
` [PATCH AUTOSEL 5.7 202/388] arm64: dts: qcom: c630: Add WiFi node
` [PATCH AUTOSEL 5.7 230/388] drm/msm: Fix undefined "rd_full" link error
` [PATCH AUTOSEL 5.7 231/388] drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation
` [PATCH AUTOSEL 5.7 256/388] bus: mhi: core: Read transfer length from an event properly
` [PATCH AUTOSEL 5.7 283/388] scsi: ufs-qcom: Fix scheduling while atomic issue
[PATCH 1/2] drm/msm: Fix address space size after refactor
2020-06-18 2:39 UTC (3+ messages)
` [PATCH 2/2] drm/msm: Fix setup of a6xx create_address_space
[PATCH 0/3] Add thermal support for SM8150, SM8250
2020-06-18 2:34 UTC (5+ messages)
` [PATCH 1/3] dt-bindings: thermal: qcom-tsens: Add compatible for sm8150, sm8250
` [PATCH 3/3] arm64: dts: qcom: sm8250: Add thermal zones and throttling support
[PATCH AUTOSEL 5.4 009/266] clk: qcom: msm8916: Fix the address location of pll->config_reg
2020-06-18 1:15 UTC (9+ messages)
` [PATCH AUTOSEL 5.4 029/266] remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
` [PATCH AUTOSEL 5.4 089/266] arm64: dts: qcom: msm8916: remove unit name for thermal trip points
` [PATCH AUTOSEL 5.4 097/266] arm64: dts: qcom: fix pm8150 gpio interrupts
` [PATCH AUTOSEL 5.4 098/266] firmware: qcom_scm: fix bogous abuse of dma-direct internals
` [PATCH AUTOSEL 5.4 106/266] slimbus: ngd: get drvdata from correct device
` [PATCH AUTOSEL 5.4 131/266] arm64: dts: msm8996: Fix CSI IRQ types
` [PATCH AUTOSEL 5.4 156/266] drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation
` [PATCH AUTOSEL 5.4 194/266] scsi: ufs-qcom: Fix scheduling while atomic issue
[PATCH AUTOSEL 4.19 009/172] clk: qcom: msm8916: Fix the address location of pll->config_reg
2020-06-18 1:21 UTC (5+ messages)
` [PATCH AUTOSEL 4.19 061/172] firmware: qcom_scm: fix bogous abuse of dma-direct internals
` [PATCH AUTOSEL 4.19 069/172] slimbus: ngd: get drvdata from correct device
` [PATCH AUTOSEL 4.19 097/172] drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation
` [PATCH AUTOSEL 4.19 123/172] scsi: ufs-qcom: Fix scheduling while atomic issue
[PATCH AUTOSEL 4.14 007/108] clk: qcom: msm8916: Fix the address location of pll->config_reg
2020-06-18 1:25 UTC (3+ messages)
` [PATCH AUTOSEL 4.14 064/108] drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation
` [PATCH AUTOSEL 4.14 081/108] scsi: ufs-qcom: Fix scheduling while atomic issue
[PATCH AUTOSEL 4.9 06/80] clk: qcom: msm8916: Fix the address location of pll->config_reg
2020-06-18 1:27 UTC (2+ messages)
` [PATCH AUTOSEL 4.9 51/80] drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation
[PATCH AUTOSEL 4.4 04/60] clk: qcom: msm8916: Fix the address location of pll->config_reg
2020-06-18 1:29 UTC
[PATCH v8 0/7] iommu/arm-smmu: Enable split pagetable support
2020-06-17 22:40 UTC (3+ messages)
` [PATCH v8 3/7] dt-bindings: arm-smmu: Add compatible string for Adreno GPU SMMU
[PATCH] usb: dwc3: qcom: Make sure core device is fully initialized before it is used
2020-06-17 21:24 UTC (3+ messages)
[PATCH v6 0/6] Introduce Power domain based warming device driver
2020-06-17 21:14 UTC (4+ messages)
[PATCH v6 0/4] mmc: mediatek: add mmc cqhci support
2020-06-17 21:02 UTC (3+ messages)
` [PATCH v6 4/4] dt-bindings: mmc: mediatek: Add document for mt6779
[PATCH v6 0/5] iommu/arm-smmu: Split pagetable support for arm-smmu-v2
2020-06-17 20:37 UTC (4+ messages)
` [PATCH v6 4/5] drm/msm: Refactor address space initialization
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).