linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2021-06-30 09:01:10 to 2021-07-05 12:56:08 UTC [more...]

[PATCH 0/2] soc: qcom: rpmhpd: Improve rpmhpd enable handling
 2021-07-05 12:55 UTC  (8+ messages)
` [PATCH 1/2] soc: qcom: rpmhpd: Use corner in power_off
` [PATCH 2/2] soc: qcom: rpmhpd: Make power_on actually enable the domain
  ` [RESEND PATCH "

[PATCH v2 0/7] media: venus: Enable venus support on sc7280
 2021-07-05  9:43 UTC  (10+ messages)
` [PATCH v2 1/7] venus: firmware: enable no tz fw loading for sc7280
` [PATCH v2 2/7] media: venus: core: Add sc7280 DT compatible and resource data
` [PATCH v2 3/7] media: venus: Add num_vpp_pipes to resource structure
` [PATCH v2 4/7] media: venus: hfi: Skip AON register programming for V6 1pipe
` [PATCH v2 5/7] venus: vdec: set work route to fw
` [PATCH v2 6/7] media: venus: helpers: update NUM_MBS macro calculation
` [PATCH v2 7/7] media: venus: Set buffer to FW based on FW min count requirement

[PATCH v4 1/3] pwm: driver for qualcomm ipq6018 pwm block
 2021-07-05  7:20 UTC  (2+ messages)

[PATCH] iommu: qcom: Revert "iommu/arm: Cleanup resources in case of probe error path"
 2021-07-05  6:56 UTC 

[PATCH v3 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280
 2021-07-05  6:18 UTC  (3+ messages)
` [PATCH v3 4/4] PCIe: qcom: Add support to control pipe clk mux

[PATCH 0/6] clk: qcom: use power-domain for sm8250's clock controllers
 2021-07-05  4:33 UTC  (23+ messages)
` [PATCH 1/6] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain
` [PATCH 2/6] dt-bindings: clock: qcom,videocc: "
` [PATCH 3/6] clk: qcom: gdsc: enable optional power domain support
` [PATCH 4/6] arm64: dts: qcom: sm8250: remove mmcx regulator
` [PATCH 5/6] clk: qcom: dispcc-sm8250: stop using "
` [PATCH 6/6] clk: qcom: videocc-sm8250: "

[PATCH 0/3] Add 'qcom,pon-reboot-not-used' support in PON driver
 2021-07-05  2:50 UTC  (4+ messages)
` [PATCH 1/3] dt-bindings: power: reset: Convert qcom,pon to DT schema
` [PATCH 2/3] dt-bindings: qcom,pon: Add 'qcom,pon-reboot-not-used' property
` [PATCH 3/3] power: reset: qcom-pon: Add support for 'qcom,pon-reboot-not-used'

[PATCH 0/3] Add 'qcom,mode-in-imem' support in PON driver
 2021-07-05  2:41 UTC  (6+ messages)
` [PATCH 1/3] dt-bindings: power: reset: Convert qcom,pon to DT schema
` [PATCH 2/3] dt-bindings: qcom,pon: Add 'qcom,mode-in-imem' support
` [PATCH 3/3] power: reset: qcom-pon: Add support for 'qcom,mode-in-imem'

[PATCH v2 00/22] drm/msm/dpu: switch dpu_plane to be virtual
 2021-07-05  1:21 UTC  (23+ messages)
` [PATCH v2 01/22] drm/msm/dpu: move LUT levels out of QOS config
` [PATCH v2 02/22] drm/msm/dpu: remove pipe_qos_cfg from struct dpu_plane
` [PATCH v2 03/22] drm/msm/dpu: drop pipe_name "
` [PATCH v2 04/22] drm/msm/dpu: remove stage_cfg from struct dpu_crtc
` [PATCH v2 05/22] drm/msm/dpu: rip out master planes support
` [PATCH v2 06/22] drm/msm/dpu: move dpu_hw_pipe_cfg out of struct dpu_plane
` [PATCH v2 07/22] drm/msm/dpu: drop scaler config from plane state
` [PATCH v2 08/22] drm/msm/dpu: drop dpu_csc_cfg from dpu_plane
` [PATCH v2 09/22] drm/msm/dpu: remove dpu_hw_pipe_cdp_cfg "
` [PATCH v2 10/22] drm/msm/dpu: don't cache pipe->cap->features in dpu_plane
` [PATCH v2 11/22] drm/msm/dpu: don't cache pipe->cap->sblk "
` [PATCH v2 12/22] drm/msm/dpu: rip out debugfs support from dpu_plane
` [PATCH v2 13/22] drm/msm/dpu: drop src_split and multirect check from dpu_crtc_atomic_check
` [PATCH v2 14/22] drm/msm/dpu: add list of supported formats to the DPU caps
` [PATCH v2 15/22] drm/msm/dpu: simplify DPU_SSPP features checks
` [PATCH v2 16/22] drm/msm/dpu: do not limit the zpos property
` [PATCH v2 17/22] drm/msm/dpu: add support for SSPP allocation to RM
` [PATCH v2 18/22] drm/msm/dpu: move pipe_hw to dpu_plane_state
` [PATCH v2 19/22] drm/msm/dpu: add support for virtualized planes
` [PATCH v2 20/22] drm/msm/dpu: fix smart dma support
` [PATCH v2 21/22] drm/msm/dpu: fix CDP setup to account for multirect index
` [PATCH v2 22/22] drm/msm/dpu: add multirect support

[RFC 0/6] drm/msm/dpu: add support for idependent DSI config
 2021-07-04 23:41 UTC  (9+ messages)
` [RFC 2/6] drm/msm/dpu: support setting up two independent DSI connectors
  ` [Freedreno] "
` [RFC 3/6] drm/msm/mdp5: move mdp5_encoder_set_intf_mode after msm_dsi_modeset_init
  ` [Freedreno] "

[PATCH AUTOSEL 5.10 31/70] crypto: qce: skcipher: Fix incorrect sg count for dma transfers
 2021-07-04 23:07 UTC 

[PATCH AUTOSEL 5.12 33/80] crypto: qce: skcipher: Fix incorrect sg count for dma transfers
 2021-07-04 23:05 UTC 

[PATCH] drm/msm/dpu: make dpu_hw_ctl_clear_all_blendstages clear necessary LMs
 2021-07-04 23:05 UTC 

[PATCH AUTOSEL 5.13 33/85] crypto: qce: skcipher: Fix incorrect sg count for dma transfers
 2021-07-04 23:03 UTC 

[PATCH v5 0/5] iommu/arm-smmu: adreno-smmu page fault handling
 2021-07-04 18:20 UTC  (3+ messages)

[RFC] Inline rotation support in dpu driver
 2021-07-04 18:17 UTC  (4+ messages)

[bisected] BSOD on Nexus 7 at boot caused by "drm/msm/mdp4: only use lut_clk on mdp4.2+"
 2021-07-04 15:07 UTC  (2+ messages)

[V3] venus: helper: do not set constrained parameters for UBWC
 2021-07-04 14:00 UTC  (3+ messages)

[bisected] "drm/msm/dsi: Move setup_encoder to modeset_init" breaks mdp4 on Nexus 7
 2021-07-04 11:26 UTC 

[RFC] drm/msm/disp/dpu1: add support for inline rotation in dpu driver
 2021-07-04 11:20 UTC  (3+ messages)

[PATCH] RFC: dt-bindings: drm/msm/gpu: convert to YAML
 2021-07-04  8:18 UTC  (2+ messages)

[PATCH v2 0/4] Add MSM8939 APCS/A53PLL clock support
 2021-07-04  2:40 UTC  (5+ messages)
` [PATCH v2 1/4] clk: qcom: apcs-msm8916: Flag a53mux instead of a53pll as critical
` [PATCH v2 2/4] clk: qcom: a53pll/mux: Use unique clock name
` [PATCH v2 3/4] dt-bindings: clock: Update qcom,a53pll bindings for MSM8939 support
` [PATCH v2 4/4] clk: qcom: a53-pll: Add MSM8939 a53pll support

[PATCH 0/3] Implement role-switch notifications from dwc3-drd to dwc3-qcom
 2021-07-04  1:33 UTC  (4+ messages)
` [PATCH 1/3] usb: dwc3: dwc3-qcom: Fix typo in the dwc3 vbus override API
` [PATCH 2/3] usb: dwc3: Add role switch relay support
` [PATCH 3/3] usb: dwc3: dwc3-qcom: Make dwc3-qcom a role-switch signal recipient

[PATCH v12 0/6] Re-introduce TX FIFO resize for larger EP bursting
 2021-07-02  9:37 UTC  (7+ messages)
` [PATCH v12 1/6] usb: gadget: udc: core: Introduce check_config to verify USB configuration
` [PATCH v12 2/6] usb: gadget: configfs: Check USB configuration before adding
` [PATCH v12 3/6] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
` [PATCH v12 4/6] of: Add stub for of_add_property()
` [PATCH v12 5/6] usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default
` [PATCH v12 6/6] dt-bindings: usb: dwc3: Update dwc3 TX fifo properties

[PATCH v11 0/5] Re-introduce TX FIFO resize for larger EP bursting
 2021-07-02  8:19 UTC  (12+ messages)
` [PATCH v11 1/5] usb: gadget: udc: core: Introduce check_config to verify USB configuration
` [PATCH v11 3/5] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
` [PATCH v11 4/5] usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default
` [PATCH v11 5/5] dt-bindings: usb: dwc3: Update dwc3 TX fifo properties

[PATCH v2 0/2] sms911x: DTS fixes and DT binding to json-schema conversion
 2021-07-01 21:00 UTC  (4+ messages)
` [PATCH v2 1/2] ARM: dts: qcom-apq8060: Correct Ethernet node name and drop bogus irq property
` [PATCH v2 2/2] dt-bindings: net: sms911x: Convert to json-schema

[PATCH] drm/msm/dsi: drop gdsc regulator handling
 2021-07-01 20:59 UTC  (3+ messages)
` [Freedreno] "

[PATCH] bus: mhi: core: Use mhi_soc_reset() API instead of register write
 2021-07-01 20:57 UTC  (2+ messages)

[PATCH 0/9] Add Modem support on SC7280 SoCs
 2021-07-01 20:02 UTC  (14+ messages)
` [PATCH 3/9] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding
` [PATCH 6/9] arm64: dts: qcom: sc7280: Update reserved memory map
` [PATCH 8/9] arm64: dts: qcom: sc7280: Add Q6V5 MSS node
` [PATCH 9/9] arm64: dts: qcom: sc7280: Update "

[PATCH 0/3] dt-bindings: soc: qcom: aoss: Support sc8180x and convert to YAML
 2021-07-01 19:34 UTC  (7+ messages)
` [PATCH 1/3] dt-bindings: soc: qcom: aoss: Add SC8180X compatible
` [PATCH 2/3] dt-bindings: soc: qcom: aoss: Convert to YAML

[PATCH 0/4] interconnect: Fix sync-state issues
 2021-07-01 18:55 UTC  (7+ messages)
` [PATCH 1/4] interconnect: Zero initial BW after sync-state
` [PATCH 2/4] interconnect: Always call pre_aggregate before aggregate
` [PATCH 3/4] interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes

[PATCH v6 0/6] Add support for Core Power Reduction v3, v4 and Hardened
 2021-07-01 17:46 UTC  (10+ messages)
` [PATCH v6 1/6] soc: qcom: cpr: Move common functions to new file
` [PATCH v6 2/6] dt-bindings: avs: cpr: Convert binding to YAML schema
` [PATCH v6 3/6] arm64: qcom: qcs404: Change CPR nvmem-names
` [PATCH v6 4/6] soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened
` [PATCH v6 5/6] MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver
` [PATCH v6 6/6] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver

[PATCH V2] mmc: sdhci: Update the software timeout value for sdhc
 2021-07-01 16:58 UTC  (3+ messages)

[PATCH v5 0/3] Add Qualcomm PCIe Endpoint driver support
 2021-07-01 15:25 UTC  (2+ messages)

[PATCH] iommu/arm: Cleanup resources in case of probe error path
 2021-07-01  9:26 UTC  (10+ messages)

[PATCH 0/2] dwc3-qcom: Prepare the ground for pm8150b tcpm
 2021-07-01  2:08 UTC  (10+ messages)
` [PATCH 1/2] usb: dwc3: dwc3-qcom: Find USB connector and register role switch

[PATCH v3 0/2] bus: mhi: Fix MHI on big endian architectures
 2021-07-01  1:52 UTC  (5+ messages)
` [PATCH v3 1/2] bus: mhi: Fix pm_state conversion to string
` [PATCH v3 2/2] bus: mhi: Fix MHI DMA structure endianness

[PATCH v9 0/5] Re-introduce TX FIFO resize for larger EP bursting
 2021-07-01  1:08 UTC  (11+ messages)

[PATCH v2 0/2] clk: qcom: fix error path and cleanup in gdsc support
 2021-07-01  0:41 UTC  (4+ messages)
` [PATCH v2 1/2] clk: qcom: fix error_path in gdsc_register
` [PATCH v2 2/2] clk: qcom: fix domains cleanup in gdsc_unregister

"soc: qcom: mdt_loader: Support loading non-split images" breaks wcnss fw loading on Nexus 7
 2021-06-30 20:41 UTC  (3+ messages)

[PATCH v3 00/13] Use qmp_send to update co-processor load state
 2021-06-30 19:56 UTC  (13+ messages)
` [PATCH v3 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP bindings
` [PATCH v3 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state
` [PATCH v3 05/13] arm64: dts: qcom: sc7180: Use QMP binding to control "
` [PATCH v3 11/13] soc: qcom: aoss: Drop power domain support

[PATCH v4] arm64: dts: qcom: sc7180: Add DisplayPort node
 2021-06-30 17:51 UTC  (3+ messages)

[PATCH v2 1/3] pwm: driver for qualcomm ipq6018 pwm block
 2021-06-30 14:46 UTC  (4+ messages)
` [PATCH v2 2/3] dt-bindings: pwm: add IPQ6018 binding

[PATCH V5 0/4] Add driver support for Data Capture and Compare Engine(DCC) for SM8150
 2021-06-30 13:50 UTC  (5+ messages)
` [PATCH V5 1/4] dt-bindings: Added the yaml bindings for DCC
` [PATCH V5 2/4] soc: qcom: dcc:Add driver support for Data Capture and Compare unit(DCC)
` [PATCH V5 3/4] MAINTAINERS: Add the entry for DCC(Data Capture and Compare) driver support
` [PATCH V5 4/4] arm64: dts: qcom: sm8150: Add Data Capture and Compare(DCC) support node

[PATCH 00/10] MHI patches for v5.14 - Take 2
 2021-06-30 13:25 UTC  (3+ messages)

[PATCH 2/3] iommu/io-pgtable-arm: Add IOMMU_LLC page protection flag
 2021-06-30 10:07 UTC  (10+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).