linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
[PATCH 1/2] soc: qcom: smsm: Implement support for get_irqchip_state
 2021-07-12 13:57 UTC  (2+ messages)
` [PATCH 2/2] soc: qcom: smsm: Fix missed interrupts if state changes while masked

[v8 0/6] drm: Support basic DPCD backlight in panel-simple and add a new panel ATNA33XC20
 2021-07-12 13:39 UTC  (8+ messages)
` [v8 1/6] drm/panel: add basic DP AUX backlight support

[PATCH 1/4] arm64: dts: qcom: Add device tree for Xiaomi Redmi 2 (wingtech-wt88047)
 2021-07-12 13:37 UTC  (4+ messages)
` [PATCH 2/4] arm64: dts: qcom: msm8916-wingtech-wt88047: Add touchscreen
` [PATCH 3/4] arm64: dts: qcom: msm8916-wingtech-wt88047: Add notification LED
` [PATCH 4/4] arm64: dts: qcom: msm8916-wingtech-wt88047: Add IMU

[PATCH v8 0/6] USB DWC3 host wake up support from system suspend
 2021-07-12  9:42 UTC  (6+ messages)
` [PATCH v8 2/6] usb: host: xhci: plat: Add suspend quirk for dwc3 controller
` [PATCH v8 6/6] usb: dwc3: qcom: Keep power domain on to support wakeup

[PATCH v5 0/3] Add Qualcomm PCIe Endpoint driver support
 2021-07-12  7:53 UTC  (3+ messages)

[Patch v3 0/6] Introduce LMh driver for Qualcomm SoCs
 2021-07-12  4:41 UTC  (17+ messages)
` [Patch v3 1/6] firmware: qcom_scm: Introduce SCM calls to access LMh
` [Patch v3 2/6] thermal: qcom: Add support for LMh driver
` [Patch v3 3/6] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
` [Patch v3 4/6] arm64: boot: dts: qcom: sdm45: Add support for LMh node
` [Patch v3 5/6] arm64: boot: dts: qcom: sdm845: Remove cpufreq cooling devices for CPU thermal zones
` [Patch v3 6/6] dt-bindings: thermal: Add dt binding for QCOM LMh

[PATCHv3] iommu/arm-smmu: Optimize ->tlb_flush_walk() for qcom implementation
 2021-07-12  4:09 UTC  (2+ messages)

[v1] drm/msm/disp/dpu1: add safe lut config in dpu driver
 2021-07-12  3:41 UTC  (3+ messages)

[PATCH] rpmsg: glink: Replace strncpy() with strscpy_pad()
 2021-07-11 14:55 UTC 

[PATCH] Input: pm8941-pwrkey - respect reboot_mode for warm reset
 2021-07-11  9:57 UTC  (2+ messages)

[PATCH] arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x
 2021-07-11  7:15 UTC  (2+ messages)

[PATCH v3 0/7] drm/msm/dpu: add support for independent DSI config
 2021-07-11  4:21 UTC  (9+ messages)
` [PATCH v3 1/7] drm/msm/dsi: rename dual DSI to bonded DSI
` [PATCH v3 2/7] drm/msm/dsi: add three helper functions
` [PATCH v3 3/7] drm/msm/dpu: support setting up two independent DSI connectors
` [PATCH v3 4/7] drm/msm/mdp5: move mdp5_encoder_set_intf_mode after msm_dsi_modeset_init
` [PATCH v3 5/7] drm/msm/dp: stop calling set_encoder_mode callback
` [PATCH v3 6/7] drm/msm/dsi: "
` [PATCH v3 7/7] drm/msm/kms: drop "

[PATCH] drm/msm: reduce usage of round_pixclk callback
 2021-07-10 21:14 UTC 

[PATCH v2 0/7] drm/msm/dpu: add support for independent DSI config
 2021-07-10 19:57 UTC  (11+ messages)
` [PATCH v2 1/7] drm/msm/dsi: rename dual DSI to bonded DSI
` [PATCH v2 2/7] drm/msm/dsi: add two helper functions
` [PATCH v2 3/7] drm/msm/dpu: support setting up two independent DSI connectors
  ` [Freedreno] "
` [PATCH v2 4/7] drm/msm/mdp5: move mdp5_encoder_set_intf_mode after msm_dsi_modeset_init
` [PATCH v2 5/7] drm/msm/dp: stop calling set_encoder_mode callback
` [PATCH v2 6/7] drm/msm/dsi: "
` [PATCH v2 7/7] drm/msm/kms: drop "

[PATCH 0/2] clk: qcom: move pm_clk handling to common code
 2021-07-10 14:01 UTC  (3+ messages)
` [PATCH 1/2] clk: qcom: use common code for qcom_cc_probe_by_index
` [PATCH 2/2] clk: qcom: move pm_clk functionality into common code

[PATCH v4 0/6] clk: qcom: use power-domain for sm8250's clock controllers
 2021-07-10 11:50 UTC  (9+ messages)
` [PATCH v4 1/6] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain
` [PATCH v4 2/6] dt-bindings: clock: qcom,videocc: "
` [PATCH v4 3/6] clk: qcom: gdsc: enable optional power domain support
` [PATCH v4 4/6] arm64: dts: qcom: sm8250: remove mmcx regulator
` [PATCH v4 5/6] clk: qcom: dispcc-sm8250: stop using "
` [PATCH v4 6/6] clk: qcom: videocc-sm8250: "

[PATCH v14 0/6] Re-introduce TX FIFO resize for larger EP bursting
 2021-07-10  9:13 UTC  (7+ messages)
` [PATCH v14 1/6] usb: gadget: udc: core: Introduce check_config to verify USB configuration
` [PATCH v14 2/6] usb: gadget: configfs: Check USB configuration before adding
` [PATCH v14 3/6] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
` [PATCH v14 4/6] of: Add stub for of_add_property()
` [PATCH v14 5/6] usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default
` [PATCH v14 6/6] dt-bindings: usb: dwc3: Update dwc3 TX fifo properties

[PATCH] ARM: dts: qcom: msm8974-klte: Enable remote processors
 2021-07-10  8:55 UTC 

[PATCH v2 0/4] Add MSM8939 APCS/A53PLL clock support
 2021-07-10  7:34 UTC  (6+ messages)
` [PATCH v2 2/4] clk: qcom: a53pll/mux: Use unique clock name

[PATCH 0/5] Add Pdc, GCC and RPMh clock support for SDX65
 2021-07-10  3:31 UTC  (10+ messages)
` [PATCH 1/5] dt-bindings: clock: Add SDX65 GCC clock bindings
` [PATCH 2/5] clk: qcom: Add SDX65 GCC support
` [PATCH 3/5] dt-bindings: clock: Introduce RPMHCC bindings for SDX65
` [PATCH 4/5] clk: qcom: Add support for SDX65 RPMh clocks
` [PATCH 5/5] dt-bindings: clock: Introduce pdc bindings for SDX65

[PATCH 0/2] Add devicetree support for SDX65 Modem and MTP
 2021-07-10  3:13 UTC  (5+ messages)
` [PATCH 1/2] dt-bindings: arm: qcom: Document SDX65 platform and boards
` [PATCH 2/2] ARM: dts: qcom: Add SDX65 platform and MTP board support

[PATCH 0/1] Devicetree update for SDX65 platform
 2021-07-10  3:12 UTC  (3+ messages)
` [PATCH 1/1] ARM: dts: qcom: sdx65: Add pincontrol node

[PATCH 0/2] Add pinctrl support for SDX65
 2021-07-10  3:08 UTC  (5+ messages)
` [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
` [PATCH 2/2] pinctrl: qcom: Add SDX65 pincontrol driver

[PATCH v3 0/7] clk: qcom: use power-domain for sm8250's clock controllers
 2021-07-10  0:53 UTC  (19+ messages)
` [PATCH v3 1/7] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain
` [PATCH v3 2/7] dt-bindings: clock: qcom,videocc: "
` [PATCH v3 3/7] clk: qcom: gdsc: enable optional power domain support
` [PATCH v3 4/7] clk: qcom: gdsc: call runtime PM functions for the provider device
` [PATCH v3 5/7] arm64: dts: qcom: sm8250: remove mmcx regulator
` [PATCH v3 6/7] clk: qcom: dispcc-sm8250: stop using "
` [PATCH v3 7/7] clk: qcom: videocc-sm8250: "

[PATCH v1 0/7] drm/msm/dpu: add support for idependent DSI config
 2021-07-09 23:46 UTC  (18+ messages)
` [PATCH v1 1/7] drm/msm/dsi: rename dual DSI to bonded DSI
  ` [Freedreno] "
` [PATCH v1 2/7] drm/msm/dsi: add two helper functions
  ` [Freedreno] "
` [PATCH v1 3/7] drm/msm/dpu: support setting up two independent DSI connectors
  ` [Freedreno] "
` [PATCH v1 4/7] drm/msm/mdp5: move mdp5_encoder_set_intf_mode after msm_dsi_modeset_init
  ` [Freedreno] "
` [PATCH v1 5/7] drm/msm/dp: stop calling set_encoder_mode callback
  ` [Freedreno] "
` [PATCH v1 6/7] drm/msm/dsi: "
  ` [Freedreno] "
` [PATCH v1 7/7] drm/msm/kms: drop "
  ` [Freedreno] "
` [Freedreno] [PATCH v1 0/7] drm/msm/dpu: add support for idependent DSI config

[PATCH v2 0/8] dsi: rework clock parents and timing handling
 2021-07-09 21:07 UTC  (9+ messages)
` [PATCH v2 1/8] dt-bindings: display: msm: dsi-controller-main: restore assigned-clocks
` [PATCH v2 2/8] arm64: dts: qcom: sc7180: assign DSI clock source parents
` [PATCH v2 3/8] arm64: dts: qcom: sdm845: "
` [PATCH v2 4/8] arm64: dts: qcom: sdm845-mtp: "
` [PATCH v2 5/8] arm64: dts: qcom: sm8250: "
` [PATCH v2 6/8] drm/msm/dsi: stop setting clock parents manually
` [PATCH v2 7/8] drm/msm/dsi: phy: use of_device_get_match_data
` [PATCH v2 8/8] drm/msm/dsi: drop msm_dsi_phy_get_shared_timings

[PATCH v2 0/3] iommu: Enable non-strict DMA on QCom SD/MMC
 2021-07-09 19:21 UTC  (7+ messages)

[PATCH 0/7] add fixes to pass DP Link Layer compliance test cases
 2021-07-09 18:16 UTC  (10+ messages)
` [PATCH 2/7] drm/msm/dp: reduce link rate if failed at link training 1
` [PATCH 5/7] drm/msm/dp: return correct edid checksum after corrupted edid checksum read
` [PATCH 7/7] drm/msm/dp: retrain link when loss of symbol lock detected

[PATCH v2 0/3] dt-bindings: soc: qcom: aoss: Support sc8180x and convert to YAML
 2021-07-09 17:41 UTC  (4+ messages)
` [PATCH v2 1/3] dt-bindings: soc: qcom: aoss: Add SC8180X and generic compatible
` [PATCH v2 2/3] dt-bindings: soc: qcom: aoss: Convert to YAML
` [PATCH v2 3/3] soc: qcom: aoss: Add generic compatible

[PATCH 0/3] dt-bindings: soc: qcom: aoss: Support sc8180x and convert to YAML
 2021-07-09 17:27 UTC  (4+ messages)
` [PATCH 2/3] dt-bindings: soc: qcom: aoss: Convert "

[PATCH] arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)
 2021-07-09 17:10 UTC  (12+ messages)

[PATCH 5/5] arm64: dts: qcom: msm8996: Add SLPI PIL
 2021-07-09 17:03 UTC 

[PATCH 4/5] remoteproc: qcom: pas: Use the same init resources for MSM8996 and MSM8998
 2021-07-09 17:03 UTC 

[PATCH 3/5] arm64: dts: qcom: msm8996: Add modem remoteproc
 2021-07-09 17:02 UTC 

[PATCH 2/5] arm64: dts: qcom: msm8996: Unify smp2p naming
 2021-07-09 17:02 UTC 

[PATCH 1/5] arm64: dts: qcom: msm8996: Revamp reserved memory
 2021-07-09 17:02 UTC 

[PATCH 0/5] msm8996: Remoteproc Enablement
 2021-07-09 17:02 UTC 

[PATCH V5] arm64: dts: qcom: sc7280: Add nodes for eMMC and SD card
 2021-07-09 16:02 UTC  (3+ messages)

[RESEND PATCH v2 0/7] clk: qcom: use power-domain for sm8250's clock controllers
 2021-07-09 14:15 UTC  (22+ messages)
` [RESEND PATCH v2 1/7] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain
` [RESEND PATCH v2 2/7] dt-bindings: clock: qcom,videocc: "
` [RESEND PATCH v2 3/7] PM: domains: Add support for runtime PM
` [RESEND PATCH v2 4/7] clk: qcom: gdsc: enable optional power domain support
` [RESEND PATCH v2 5/7] arm64: dts: qcom: sm8250: remove mmcx regulator
` [RESEND PATCH v2 6/7] clk: qcom: dispcc-sm8250: stop using "
` [RESEND PATCH v2 7/7] clk: qcom: videocc-sm8250: "

[PATCH v3 0/2] convert designware-pcie.txt and kirin-pcie.txt to yaml
 2021-07-09 13:57 UTC  (2+ messages)
` [PATCH v3 1/2] dt-bindings: PCI: designware-pcie.txt: convert it "

[PATCH] media: venus: venc: Fix potential null pointer dereference on pointer fmt
 2021-07-09 12:30 UTC 

[PATCH] gpu: drm: Remove unneeded variable: "ret"
 2021-07-09  9:41 UTC 

[PATCH v3 16/20] drm/msm: always wait for the exclusive fence
 2021-07-09  9:15 UTC  (3+ messages)

[PATCH] drm/msm: Fix display fault handling
 2021-07-09  7:28 UTC  (2+ messages)

[PATCH v2] drm/msm/dp: add logs across DP driver for ease of debugging
 2021-07-09  6:27 UTC  (2+ messages)

[PATCH v13 0/6] Re-introduce TX FIFO resize for larger EP bursting
 2021-07-09  5:41 UTC  (3+ messages)
` [PATCH v13 3/6] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements

[PATCH] drm/msm/dp: Remove unused variable
 2021-07-09  3:10 UTC  (2+ messages)
` [Freedreno] "

[PATCH v2 0/7] clk: qcom: use power-domain for sm8250's clock controllers
 2021-07-09  1:30 UTC  (8+ messages)
` [PATCH v2 1/7] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain
` [PATCH v2 2/7] dt-bindings: clock: qcom,videocc: "
` [PATCH v2 3/7] PM: domains: Add support for runtime PM
` [PATCH v2 4/7] clk: qcom: gdsc: enable optional power domain support
` [PATCH v2 5/7] arm64: dts: qcom: sm8250: remove mmcx regulator
` [PATCH v2 6/7] clk: qcom: dispcc-sm8250: stop using "
` [PATCH v2 7/7] clk: qcom: videocc-sm8250: "

[PATCH V3 0/3] Add QSPI and QUPv3 DT nodes for SC7280 SoC
 2021-07-09  0:56 UTC  (6+ messages)
` [PATCH V3 1/3] arm64: dts: sc7280: Add QSPI node

[PATCH v5 0/3] Add DT bindings and DT nodes for USB in SC7280
 2021-07-09  0:36 UTC  (3+ messages)
` [PATCH v5 3/3] arm64: dts: qcom: sc7280: Add USB nodes for IDP board

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).