messages from 2021-07-09 04:31:55 to 2021-07-12 19:11:44 UTC [more...]
[PATCH v3 1/3] dt-bindings: clock: Add support for MSM8992/4 MMCC
2021-07-12 19:11 UTC (2+ messages)
[PATCH v3 0/2] convert designware-pcie.txt and kirin-pcie.txt to yaml
2021-07-12 17:45 UTC (4+ messages)
` [PATCH v3 1/2] dt-bindings: PCI: designware-pcie.txt: convert it "
[Patch v3 0/6] Introduce LMh driver for Qualcomm SoCs
2021-07-12 17:32 UTC (18+ messages)
` [Patch v3 1/6] firmware: qcom_scm: Introduce SCM calls to access LMh
` [Patch v3 2/6] thermal: qcom: Add support for LMh driver
` [Patch v3 3/6] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
` [Patch v3 4/6] arm64: boot: dts: qcom: sdm45: Add support for LMh node
` [Patch v3 5/6] arm64: boot: dts: qcom: sdm845: Remove cpufreq cooling devices for CPU thermal zones
` [Patch v3 6/6] dt-bindings: thermal: Add dt binding for QCOM LMh
[PATCH 0/3] Add 'qcom,pon-reboot-not-used' support in PON driver
2021-07-12 17:12 UTC (7+ messages)
` [PATCH 1/3] dt-bindings: power: reset: Convert qcom,pon to DT schema
` [PATCH 2/3] dt-bindings: qcom,pon: Add 'qcom,pon-reboot-not-used' property
` [PATCH 3/3] power: reset: qcom-pon: Add support for 'qcom,pon-reboot-not-used'
[PATCH v5 0/3] Add DT bindings and DT nodes for USB in SC7280
2021-07-12 16:05 UTC (3+ messages)
` [PATCH v5 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SC7280
[PATCH v3 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280
2021-07-12 16:03 UTC (3+ messages)
` [PATCH v3 4/4] PCIe: qcom: Add support to control pipe clk mux
[PATCH] spi: spi-geni-qcom: Remove confusing comment about setting the watermark
2021-07-12 15:50 UTC
[PATCH 0/4] interconnect: Fix sync-state issues
2021-07-12 15:45 UTC (10+ messages)
` [PATCH 1/4] interconnect: Zero initial BW after sync-state
` [PATCH 2/4] interconnect: Always call pre_aggregate before aggregate
` [PATCH 3/4] interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes
[PATCH] RFC: dt-bindings: drm/msm/gpu: convert to YAML
2021-07-12 15:18 UTC (4+ messages)
[v8 0/6] drm: Support basic DPCD backlight in panel-simple and add a new panel ATNA33XC20
2021-07-12 15:03 UTC (9+ messages)
` [v8 1/6] drm/panel: add basic DP AUX backlight support
[PATCH v2 0/4] Add MSM8939 APCS/A53PLL clock support
2021-07-12 14:58 UTC (6+ messages)
` [PATCH v2 2/4] clk: qcom: a53pll/mux: Use unique clock name
` [PATCH v2 3/4] dt-bindings: clock: Update qcom,a53pll bindings for MSM8939 support
[PATCH 1/2] soc: qcom: smsm: Implement support for get_irqchip_state
2021-07-12 13:57 UTC (2+ messages)
` [PATCH 2/2] soc: qcom: smsm: Fix missed interrupts if state changes while masked
[PATCH 1/4] arm64: dts: qcom: Add device tree for Xiaomi Redmi 2 (wingtech-wt88047)
2021-07-12 13:37 UTC (4+ messages)
` [PATCH 2/4] arm64: dts: qcom: msm8916-wingtech-wt88047: Add touchscreen
` [PATCH 3/4] arm64: dts: qcom: msm8916-wingtech-wt88047: Add notification LED
` [PATCH 4/4] arm64: dts: qcom: msm8916-wingtech-wt88047: Add IMU
[PATCH v8 0/6] USB DWC3 host wake up support from system suspend
2021-07-12 9:42 UTC (6+ messages)
` [PATCH v8 2/6] usb: host: xhci: plat: Add suspend quirk for dwc3 controller
` [PATCH v8 6/6] usb: dwc3: qcom: Keep power domain on to support wakeup
[PATCH v5 0/3] Add Qualcomm PCIe Endpoint driver support
2021-07-12 7:53 UTC (3+ messages)
[PATCHv3] iommu/arm-smmu: Optimize ->tlb_flush_walk() for qcom implementation
2021-07-12 4:09 UTC (2+ messages)
[v1] drm/msm/disp/dpu1: add safe lut config in dpu driver
2021-07-12 3:41 UTC (3+ messages)
[PATCH] rpmsg: glink: Replace strncpy() with strscpy_pad()
2021-07-11 14:55 UTC
[PATCH] Input: pm8941-pwrkey - respect reboot_mode for warm reset
2021-07-11 9:57 UTC (2+ messages)
[PATCH] arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x
2021-07-11 7:15 UTC (2+ messages)
[PATCH v3 0/7] drm/msm/dpu: add support for independent DSI config
2021-07-11 4:21 UTC (9+ messages)
` [PATCH v3 1/7] drm/msm/dsi: rename dual DSI to bonded DSI
` [PATCH v3 2/7] drm/msm/dsi: add three helper functions
` [PATCH v3 3/7] drm/msm/dpu: support setting up two independent DSI connectors
` [PATCH v3 4/7] drm/msm/mdp5: move mdp5_encoder_set_intf_mode after msm_dsi_modeset_init
` [PATCH v3 5/7] drm/msm/dp: stop calling set_encoder_mode callback
` [PATCH v3 6/7] drm/msm/dsi: "
` [PATCH v3 7/7] drm/msm/kms: drop "
[PATCH] drm/msm: reduce usage of round_pixclk callback
2021-07-10 21:14 UTC
[PATCH v2 0/7] drm/msm/dpu: add support for independent DSI config
2021-07-10 19:57 UTC (11+ messages)
` [PATCH v2 1/7] drm/msm/dsi: rename dual DSI to bonded DSI
` [PATCH v2 2/7] drm/msm/dsi: add two helper functions
` [PATCH v2 3/7] drm/msm/dpu: support setting up two independent DSI connectors
` [Freedreno] "
` [PATCH v2 4/7] drm/msm/mdp5: move mdp5_encoder_set_intf_mode after msm_dsi_modeset_init
` [PATCH v2 5/7] drm/msm/dp: stop calling set_encoder_mode callback
` [PATCH v2 6/7] drm/msm/dsi: "
` [PATCH v2 7/7] drm/msm/kms: drop "
[PATCH 0/2] clk: qcom: move pm_clk handling to common code
2021-07-10 14:01 UTC (3+ messages)
` [PATCH 1/2] clk: qcom: use common code for qcom_cc_probe_by_index
` [PATCH 2/2] clk: qcom: move pm_clk functionality into common code
[PATCH v4 0/6] clk: qcom: use power-domain for sm8250's clock controllers
2021-07-10 11:50 UTC (9+ messages)
` [PATCH v4 1/6] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain
` [PATCH v4 2/6] dt-bindings: clock: qcom,videocc: "
` [PATCH v4 3/6] clk: qcom: gdsc: enable optional power domain support
` [PATCH v4 4/6] arm64: dts: qcom: sm8250: remove mmcx regulator
` [PATCH v4 5/6] clk: qcom: dispcc-sm8250: stop using "
` [PATCH v4 6/6] clk: qcom: videocc-sm8250: "
[PATCH v14 0/6] Re-introduce TX FIFO resize for larger EP bursting
2021-07-10 9:13 UTC (7+ messages)
` [PATCH v14 1/6] usb: gadget: udc: core: Introduce check_config to verify USB configuration
` [PATCH v14 2/6] usb: gadget: configfs: Check USB configuration before adding
` [PATCH v14 3/6] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
` [PATCH v14 4/6] of: Add stub for of_add_property()
` [PATCH v14 5/6] usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default
` [PATCH v14 6/6] dt-bindings: usb: dwc3: Update dwc3 TX fifo properties
[PATCH] ARM: dts: qcom: msm8974-klte: Enable remote processors
2021-07-10 8:55 UTC
[PATCH 0/5] Add Pdc, GCC and RPMh clock support for SDX65
2021-07-10 3:31 UTC (10+ messages)
` [PATCH 1/5] dt-bindings: clock: Add SDX65 GCC clock bindings
` [PATCH 2/5] clk: qcom: Add SDX65 GCC support
` [PATCH 3/5] dt-bindings: clock: Introduce RPMHCC bindings for SDX65
` [PATCH 4/5] clk: qcom: Add support for SDX65 RPMh clocks
` [PATCH 5/5] dt-bindings: clock: Introduce pdc bindings for SDX65
[PATCH 0/2] Add devicetree support for SDX65 Modem and MTP
2021-07-10 3:13 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: arm: qcom: Document SDX65 platform and boards
` [PATCH 2/2] ARM: dts: qcom: Add SDX65 platform and MTP board support
[PATCH 0/1] Devicetree update for SDX65 platform
2021-07-10 3:12 UTC (3+ messages)
` [PATCH 1/1] ARM: dts: qcom: sdx65: Add pincontrol node
[PATCH 0/2] Add pinctrl support for SDX65
2021-07-10 3:08 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
` [PATCH 2/2] pinctrl: qcom: Add SDX65 pincontrol driver
[PATCH v3 0/7] clk: qcom: use power-domain for sm8250's clock controllers
2021-07-10 0:53 UTC (19+ messages)
` [PATCH v3 1/7] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain
` [PATCH v3 2/7] dt-bindings: clock: qcom,videocc: "
` [PATCH v3 3/7] clk: qcom: gdsc: enable optional power domain support
` [PATCH v3 4/7] clk: qcom: gdsc: call runtime PM functions for the provider device
` [PATCH v3 5/7] arm64: dts: qcom: sm8250: remove mmcx regulator
` [PATCH v3 6/7] clk: qcom: dispcc-sm8250: stop using "
` [PATCH v3 7/7] clk: qcom: videocc-sm8250: "
[PATCH v1 0/7] drm/msm/dpu: add support for idependent DSI config
2021-07-09 23:46 UTC (18+ messages)
` [PATCH v1 1/7] drm/msm/dsi: rename dual DSI to bonded DSI
` [Freedreno] "
` [PATCH v1 2/7] drm/msm/dsi: add two helper functions
` [Freedreno] "
` [PATCH v1 3/7] drm/msm/dpu: support setting up two independent DSI connectors
` [Freedreno] "
` [PATCH v1 4/7] drm/msm/mdp5: move mdp5_encoder_set_intf_mode after msm_dsi_modeset_init
` [Freedreno] "
` [PATCH v1 5/7] drm/msm/dp: stop calling set_encoder_mode callback
` [Freedreno] "
` [PATCH v1 6/7] drm/msm/dsi: "
` [Freedreno] "
` [PATCH v1 7/7] drm/msm/kms: drop "
` [Freedreno] "
` [Freedreno] [PATCH v1 0/7] drm/msm/dpu: add support for idependent DSI config
[PATCH v2 0/8] dsi: rework clock parents and timing handling
2021-07-09 21:07 UTC (9+ messages)
` [PATCH v2 1/8] dt-bindings: display: msm: dsi-controller-main: restore assigned-clocks
` [PATCH v2 2/8] arm64: dts: qcom: sc7180: assign DSI clock source parents
` [PATCH v2 3/8] arm64: dts: qcom: sdm845: "
` [PATCH v2 4/8] arm64: dts: qcom: sdm845-mtp: "
` [PATCH v2 5/8] arm64: dts: qcom: sm8250: "
` [PATCH v2 6/8] drm/msm/dsi: stop setting clock parents manually
` [PATCH v2 7/8] drm/msm/dsi: phy: use of_device_get_match_data
` [PATCH v2 8/8] drm/msm/dsi: drop msm_dsi_phy_get_shared_timings
[PATCH v2 0/3] iommu: Enable non-strict DMA on QCom SD/MMC
2021-07-09 19:21 UTC (7+ messages)
[PATCH 0/7] add fixes to pass DP Link Layer compliance test cases
2021-07-09 18:16 UTC (10+ messages)
` [PATCH 2/7] drm/msm/dp: reduce link rate if failed at link training 1
` [PATCH 5/7] drm/msm/dp: return correct edid checksum after corrupted edid checksum read
` [PATCH 7/7] drm/msm/dp: retrain link when loss of symbol lock detected
[PATCH v2 0/3] dt-bindings: soc: qcom: aoss: Support sc8180x and convert to YAML
2021-07-09 17:41 UTC (4+ messages)
` [PATCH v2 1/3] dt-bindings: soc: qcom: aoss: Add SC8180X and generic compatible
` [PATCH v2 2/3] dt-bindings: soc: qcom: aoss: Convert to YAML
` [PATCH v2 3/3] soc: qcom: aoss: Add generic compatible
[PATCH 0/3] dt-bindings: soc: qcom: aoss: Support sc8180x and convert to YAML
2021-07-09 17:27 UTC (4+ messages)
` [PATCH 2/3] dt-bindings: soc: qcom: aoss: Convert "
[PATCH] arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)
2021-07-09 17:10 UTC (12+ messages)
[PATCH 4/5] remoteproc: qcom: pas: Use the same init resources for MSM8996 and MSM8998
2021-07-09 17:03 UTC
[PATCH 5/5] arm64: dts: qcom: msm8996: Add SLPI PIL
2021-07-09 17:03 UTC
[PATCH 3/5] arm64: dts: qcom: msm8996: Add modem remoteproc
2021-07-09 17:02 UTC
[PATCH 1/5] arm64: dts: qcom: msm8996: Revamp reserved memory
2021-07-09 17:02 UTC
[PATCH 2/5] arm64: dts: qcom: msm8996: Unify smp2p naming
2021-07-09 17:02 UTC
[PATCH 0/5] msm8996: Remoteproc Enablement
2021-07-09 17:02 UTC
[PATCH V5] arm64: dts: qcom: sc7280: Add nodes for eMMC and SD card
2021-07-09 16:02 UTC (3+ messages)
[RESEND PATCH v2 0/7] clk: qcom: use power-domain for sm8250's clock controllers
2021-07-09 14:15 UTC (20+ messages)
` [RESEND PATCH v2 3/7] PM: domains: Add support for runtime PM
` [RESEND PATCH v2 4/7] clk: qcom: gdsc: enable optional power domain support
` [RESEND PATCH v2 5/7] arm64: dts: qcom: sm8250: remove mmcx regulator
` [RESEND PATCH v2 6/7] clk: qcom: dispcc-sm8250: stop using "
` [RESEND PATCH v2 7/7] clk: qcom: videocc-sm8250: "
[PATCH] media: venus: venc: Fix potential null pointer dereference on pointer fmt
2021-07-09 12:30 UTC
[PATCH] gpu: drm: Remove unneeded variable: "ret"
2021-07-09 9:41 UTC
[PATCH v3 16/20] drm/msm: always wait for the exclusive fence
2021-07-09 9:15 UTC (3+ messages)
[PATCH] drm/msm: Fix display fault handling
2021-07-09 7:28 UTC (2+ messages)
[PATCH v2] drm/msm/dp: add logs across DP driver for ease of debugging
2021-07-09 6:27 UTC
[PATCH v13 0/6] Re-introduce TX FIFO resize for larger EP bursting
2021-07-09 5:41 UTC (3+ messages)
` [PATCH v13 3/6] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).