messages from 2021-08-08 07:54:01 to 2021-08-11 07:20:26 UTC [more...]
[PATCH v3 0/6] add fixes to pass DP Link Layer compliance test cases
2021-08-11 7:20 UTC (11+ messages)
` [PATCH v3 2/6] drm/msm/dp: reduce link rate if failed at link training 1
` [PATCH v3 4/6] drm/msm/dp: replug event is converted into an unplug followed by an plug events
` [PATCH v3 5/6] drm/msm/dp: return correct edid checksum after corrupted edid checksum read
` [PATCH v3 6/6] drm/msm/dp: do not end dp link training until video is ready
Request to update WCN6750 FW file
2021-08-11 7:09 UTC (2+ messages)
[RESEND PATCH V7 0/3] Convert qcom pmic gpio bindings to YAML
2021-08-11 6:17 UTC (2+ messages)
[PATCHv3] iommu/arm-smmu: Optimize ->tlb_flush_walk() for qcom implementation
2021-08-11 6:09 UTC
[PATCHv4] iommu/arm-smmu: Optimize ->tlb_flush_walk() for qcom implementation
2021-08-11 6:07 UTC
[PATCH v4 0/2] Qualcomm's lpass device tree changes
2021-08-11 6:06 UTC (3+ messages)
` [PATCH v4 2/2] arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for HDMI
[PATCH 0/8] cpufreq: Auto-register with energy model
2021-08-11 5:34 UTC (11+ messages)
` [PATCH 6/8] cpufreq: qcom-cpufreq-hw: Use auto-registration for "
[PATCH v3 0/6] interconnect: qcom: Add MSM8996 interconnect driver
2021-08-11 4:37 UTC (7+ messages)
` [PATCH v3 1/6] interconnect: qcom: icc-rpmh: Rename qcom_icc_set
` [PATCH v3 2/6] interconnect: qcom: sdm660: Commonize RPM-QoS
` [PATCH v3 3/6] dt-bindings: interconnect: Move SDM660 to a new RPM-QoS file
` [PATCH v3 4/6] dt-bindings: interconnect: Add Qualcomm MSM8996 DT bindings
` [PATCH v3 5/6] interconnect: qcom: Add MSM8996 interconnect provider driver
` [PATCH v3 6/6] arm64: dts: qcom: msm8996: Add interconnect support
[PATCH V1 1/1] soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
2021-08-11 4:25 UTC (8+ messages)
[PATCH v2 0/4] interconnect: Fix sync-state issues
2021-08-11 4:22 UTC (5+ messages)
` [PATCH v2 4/4] interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate
[PATCH v1] cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
2021-08-11 3:57 UTC (2+ messages)
[PATCH v1] arm64: dts: qcom: sc7280: Add clock controller ID headers
2021-08-11 0:42 UTC
[PATCH v5] drm/msm/dsi: add continuous clock support for 7nm PHY
2021-08-11 0:12 UTC (2+ messages)
[PATCH] drm/msm/dsi: add support for dsi test pattern generator
2021-08-10 23:24 UTC (5+ messages)
` [Freedreno] "
[PATCH v2 1/2] drm/msm/dsi: update dsi register header file for tpg
2021-08-10 23:01 UTC (3+ messages)
` [PATCH v2 2/2] drm/msm/dsi: add support for dsi test pattern generator
[PATCH v1 1/4] media: camss: vfe: Don't read hardware version needlessly
2021-08-10 21:46 UTC (2+ messages)
[PATCHv2] iommu/arm-smmu: Add clk_bulk_{prepare/unprepare} to system pm callbacks
2021-08-10 20:25 UTC (2+ messages)
[PATCH v2] arm64: dts: qcom: sc7280: Add WPSS remoteproc node
2021-08-10 19:51 UTC (2+ messages)
[PATCH v5 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280
2021-08-10 19:37 UTC (9+ messages)
` [PATCH v5 1/4] dt-bindings: pci: qcom: Document PCIe bindings for SC7280
` [PATCH v5 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
` [PATCH v5 3/4] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
` [PATCH v5 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280
[PATCH v2] drm/msm/dp: add drm debug logs to dp_pm_resume/suspend
2021-08-10 19:30 UTC (6+ messages)
[PATCHv3] iommu/arm-smmu: Optimize ->tlb_flush_walk() for qcom implementation
2021-08-10 18:08 UTC (4+ messages)
[PATCH v2 0/3] Add support for sc7280 WPSS PIL loading
2021-08-10 18:01 UTC (4+ messages)
` [PATCH v2 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
` [PATCH v2 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
` [PATCH v2 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
[PATCH 0/2] Add support for sc7280 WPSS PIL loading
2021-08-10 18:04 UTC (3+ messages)
[PATCH V6 0/7] Add driver support for Data Capture and Compare Engine(DCC) for SM8150,SC7280,SC7180,SDM845
2021-08-10 17:54 UTC (8+ messages)
` [PATCH V6 1/7] dt-bindings: Added the yaml bindings for DCC
` [PATCH V6 2/7] soc: qcom: dcc:Add driver support for Data Capture and Compare unit(DCC)
` [PATCH V6 3/7] MAINTAINERS: Add the entry for DCC(Data Capture and Compare) driver support
` [PATCH V6 4/7] arm64: dts: qcom: sm8150: Add Data Capture and Compare(DCC) support node
` [PATCH V6 5/7] arm64: dts: qcom: sc7280: "
` [PATCH V6 6/7] arm64: dts: qcom: sc7180: "
` [PATCH V6 7/7] arm64: dts: qcom: sdm845: "
[PATCH 0/4] Add SCM and mailbox support on MSM8953
2021-08-10 16:44 UTC (5+ messages)
` [PATCH 1/4] dt-bindings: mailbox: Add compatible for the MSM8953
` [PATCH 2/4] mailbox: qcom-apcs-ipc: Add compatible for MSM8953 SoC
` [PATCH 3/4] dt-bindings: firmware: qcom-scm: Document msm8953 bindings
` [PATCH 4/4] firmware: qcom_scm: Add compatible for MSM8953 SoC
[PATCH 0/4] arm64: dts: qcom: IPA-related DTS updates
2021-08-10 16:27 UTC (3+ messages)
` [PATCH 4/4] arm64: dts: qcom: sm8350: fix IPA interconnects
[PATCH v3 0/7] Add support for Qualcomm QCA639x chips family
2021-08-10 16:03 UTC (9+ messages)
` [PATCH v3 2/7] regulator: qca6390: add support for QCA639x powerup sequence
[PATCH v4 0/3] drivers/soc: Remove all strcpy() uses
2021-08-10 15:59 UTC (7+ messages)
` [PATCH v4 1/3] drivers/soc/qcom: Prefer strscpy over strcpy
` [PATCH v4 2/3] drivers/soc/renesas: Prefer memcpy "
` [PATCH v4 3/3] drivers/soc/ti: Prefer strscpy "
[PATCH v2 0/3] net: mdio: Add IPQ MDIO reset related function
2021-08-10 13:31 UTC (4+ messages)
` [PATCH v2 1/3] net: mdio: Add the reset function for IPQ MDIO driver
` [PATCH v2 2/3] MDIO: Kconfig: Specify more IPQ chipset supported
` [PATCH v2 3/3] dt-bindings: net: Add the properties for ipq4019 MDIO
[v6 0/3] Add L3 provider support for SC7280
2021-08-10 12:46 UTC (7+ messages)
` [v6 1/3] dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280
` [v6 2/3] interconnect: qcom: Add EPSS L3 support "
` [v6 3/3] arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider
[PATCH] pinctrl: qcom: spmi-gpio: Add pmc8180 & pmc8180c
2021-08-10 12:38 UTC (2+ messages)
[PATCH v6 0/6] clk: qcom: use power-domain for sm8250's clock controllers
2021-08-10 11:11 UTC (2+ messages)
[PATCH v1] media: camss: vfe: Don't use vfe->base before it's assigned
2021-08-10 10:33 UTC
[PATCH v2] drm/drv: Remove initialization of static variables
2021-08-10 9:59 UTC
[PATCH 0/3] iommu/drm/msm: Allow non-coherent masters to use system cache
2021-08-10 9:54 UTC (19+ messages)
` [Freedreno] "
[PATCH v4 0/7] media: venus: Enable venus support on sc7280
2021-08-10 9:47 UTC (8+ messages)
` [PATCH v4 1/7] venus: firmware: enable no tz fw loading for sc7280
` [PATCH v4 2/7] media: venus: core: Add sc7280 DT compatible and resource data
` [PATCH v4 3/7] media: venus: Add num_vpp_pipes to resource structure
` [PATCH v4 4/7] media: venus: hfi: Skip AON register programming for V6 1pipe
` [PATCH v4 5/7] venus: vdec: set work route to fw
` [PATCH v4 6/7] media: venus: helpers: update NUM_MBS macro calculation
` [PATCH v4 7/7] media: venus: Set buffer to FW based on FW min count requirement
[PATCH] iommu/arm-smmu: Add clk_bulk_{prepare/unprepare} to system pm callbacks
2021-08-10 6:51 UTC (4+ messages)
[v5 0/3] Add L3 provider support for SC7280
2021-08-10 5:59 UTC (4+ messages)
` [v5 1/3] dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280
` [v5 2/3] interconnect: qcom: Add EPSS L3 support "
` [v5 3/3] arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider
[PATCH 1/2] dt-bindings: phy: Introduce Qualcomm eDP/DP PHY binding
2021-08-10 3:36 UTC (4+ messages)
` [PATCH 2/2] phy: qcom: Introduce new eDP PHY driver
[Patch v5 0/6] Introduce LMh driver for Qualcomm SoCs
2021-08-10 2:47 UTC (9+ messages)
` [Patch v5 1/6] firmware: qcom_scm: Introduce SCM calls to access LMh
` [Patch v5 2/6] thermal: qcom: Add support for LMh driver
` [Patch v5 3/6] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
` [Patch v5 4/6] arm64: dts: qcom: sdm45: Add support for LMh node
` [Patch v5 5/6] arm64: dts: qcom: sdm845: Remove cpufreq cooling devices for CPU thermal zones
` [Patch v5 6/6] dt-bindings: thermal: Add dt binding for QCOM LMh
[PATCH v6 0/2] PM / Domains: Add support for 'required-opps' to set default perf state
2021-08-10 2:43 UTC (9+ messages)
` [PATCH v6 1/2] "
[PATCH 04/39] arm64: dts: qcom: sdm630: Add interconnect provider nodes
2021-08-10 1:02 UTC (2+ messages)
[PATCH] drm/msm/dp: add drm debug logs to dp_pm_resume/suspend
2021-08-10 0:28 UTC (3+ messages)
[PATCH v2 0/6] eDP: Support probing eDP panels dynamically instead of hardcoding
2021-08-09 22:56 UTC (6+ messages)
` [PATCH v2 1/6] dt-bindings: drm/panel-simple: Introduce generic eDP panels
[PATCH v2 1/6] dt-bindings: phy: qcom,qmp: Add IPQ6018 USB3 PHY
2021-08-09 22:13 UTC (6+ messages)
` [PATCH v2 4/6] usb: dwc3: reference clock period configuration
[PATCH] drm/msm: Disable frequency clamping on a630
2021-08-09 21:08 UTC (16+ messages)
[PATCH v2 2/9] usb: dwc3: qcom: add IRQ check
2021-08-09 20:23 UTC
[PATCH v2 0/2] Add support for Sharp LS060T1SX01 panel
2021-08-09 18:47 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: add bindings for the "
` [PATCH v2 2/2] drm/panel: Add support for "
[PATCH V5 0/2] qcom aoss qmp_get and debugfs support patches
2021-08-09 17:56 UTC (5+ messages)
` [PATCH V5 1/2] soc: qcom: aoss: Expose send for generic usecase
[PATCH v4 4/4] PCIe: qcom: Add support to control pipe clk src
2021-08-09 17:09 UTC (4+ messages)
[V4 0/3] Add L3 provider support for SC7280
2021-08-09 16:47 UTC (10+ messages)
` [V4 1/3] dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280
` [V4 2/3] interconnect: qcom: Add EPSS L3 support "
` [V4 3/3] arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider
[PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver
2021-08-09 15:49 UTC (2+ messages)
[PATCH 1/2] dt-bindings: add bindings for the Sharp LS060T1SX01 panel
2021-08-09 15:40 UTC (2+ messages)
[PATCH v2 00/40] PCI: dwc: Driver clean-ups
2021-08-09 15:02 UTC (7+ messages)
` [PATCH v2 03/40] PCI: dwc: Allow overriding bridge pci_ops
` [PATCH v2 39/40] PCI: dwc: Move N_FTS setup to common setup
[PATCH v1 0/2] Add UFS PHY support for SM6115/4250
2021-08-09 14:20 UTC (6+ messages)
` [PATCH v1 2/2] phy: qcom-qmp: Add support for SM6115 UFS phy
[PATCH] dt-bindings: net: Add the properties for ipq4019 MDIO
2021-08-09 13:06 UTC (3+ messages)
[PATCH] drivers: interconnect: sdm660: Fix up erroneous paths
2021-08-09 12:28 UTC (2+ messages)
[PATCH 2/9] usb: dwc3: qcom: add IRQ check
2021-08-09 10:07 UTC (2+ messages)
[PATCH v2 0/2] Add Sony Tulip Truly NT35521 panel support
2021-08-09 5:10 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: display: "
` [PATCH v2 2/2] drm/panel: Add Sony Tulip Truly NT35521 driver
[PATCH 0/2] Add Truly NT35521 panel driver support
2021-08-09 4:20 UTC (9+ messages)
` [PATCH 1/2] dt-bindings: display: panel: Add Truly NT35521 panel support
` [PATCH 2/2] drm/panel: Add Truly NT35521 panel driver
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).