linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2021-08-10 06:00:55 to 2021-08-12 00:24:00 UTC [more...]

[PATCH 1/2] dt-bindings: phy: Introduce Qualcomm eDP/DP PHY binding
 2021-08-12  0:23 UTC  (5+ messages)
` [PATCH 2/2] phy: qcom: Introduce new eDP PHY driver

[PATCH v1 0/2] Add support for eDP on SC7280
 2021-08-12  0:08 UTC  (3+ messages)
` [PATCH v1 1/2] drm/msm/dp: Add support for SC7280 eDP
` [PATCH v1 2/2] dt-bindings: Add SC7280 compatible string

[PATCH 0/4] drm/msm+ti-sn65dsi86: Fix NO_CONNECTOR fallout
 2021-08-11 23:52 UTC  (5+ messages)
` [PATCH 1/4] drm/bridge: ti-sn65dsi86: Avoid creating multiple connectors
` [PATCH 2/4] drm/msm/dsi: Support NO_CONNECTOR bridges
` [PATCH 3/4] drm/bridge: ti-sn65dsi86: Implement bridge->mode_valid()
` [PATCH 4/4] drm/bridge: ti-sn65dsi86: Add NO_CONNECTOR support

[PATCH] drm/msm: Read frame_count and line_count even when disabled
 2021-08-11 23:36 UTC  (5+ messages)
  ` [Freedreno] "

[PATCH v2] arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMI
 2021-08-11 22:45 UTC  (2+ messages)

[PATCH] arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMI
 2021-08-11 22:41 UTC  (3+ messages)

[PATCH v4 0/2] Qualcomm's lpass device tree changes
 2021-08-11 22:20 UTC  (5+ messages)
` [PATCH v4 2/2] arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for HDMI

[PATCH v6 0/2] PM / Domains: Add support for 'required-opps' to set default perf state
 2021-08-11 19:48 UTC  (14+ messages)
` [PATCH v6 1/2] "

[PATCH 0/2] Add Truly NT35521 panel driver support
 2021-08-11 18:51 UTC  (3+ messages)
` [PATCH 1/2] dt-bindings: display: panel: Add Truly NT35521 panel support

[PATCH] arm64: dts: qcom: sc7280: Use GIC_SPI for intc cells
 2021-08-11 18:45 UTC  (2+ messages)

[PATCH v3 0/5] Add support for QCOM SPMI Flash LEDs
 2021-08-11 18:35 UTC  (3+ messages)
` [PATCH v3 1/5] dt-bindings: leds: Add binding for qcom-spmi-flash

[PATCH v2 0/4] interconnect: Fix sync-state issues
 2021-08-11 18:13 UTC  (7+ messages)
` [PATCH v2 4/4] interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate

[PATCH v5 1/2] arm64: dts: qcom: sc7280: Add gpu support
 2021-08-11 17:51 UTC  (3+ messages)
` [PATCH v5 2/2] arm64: dts: qcom: sc7280: Add gpu thermal zone cooling support

[PATCH v2 0/3] Add support for sc7280 WPSS PIL loading
 2021-08-11 17:37 UTC  (6+ messages)
` [PATCH v2 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
` [PATCH v2 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
` [PATCH v2 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS

[PATCH] drm/msi/mdp4: populate priv->kms in mdp4_kms_init
 2021-08-11 17:06 UTC 

[PATCH v4 0/6] add fixes to pass DP Link Layer compliance test cases
 2021-08-11 16:30 UTC  (7+ messages)
` [PATCH v4 1/6] drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run
` [PATCH v4 2/6] drm/msm/dp: reduce link rate if failed at link training 1
` [PATCH v4 3/6] drm/msm/dp: reset aux controller after dp_aux_cmd_fifo_tx() failed
` [PATCH v4 4/6] drm/msm/dp: replug event is converted into an unplug followed by an plug events
` [PATCH v4 5/6] drm/msm/dp: return correct edid checksum after corrupted edid checksum read
` [PATCH v4 6/6] drm/msm/dp: do not end dp link training until video is ready

[PATCHv5] iommu/arm-smmu: Optimize ->tlb_flush_walk() for qcom implementation
 2021-08-11 16:04 UTC 

[PATCHv4] iommu/arm-smmu: Optimize ->tlb_flush_walk() for qcom implementation
 2021-08-11 16:06 UTC  (5+ messages)

[PATCH v2 0/3] net: mdio: Add IPQ MDIO reset related function
 2021-08-11 14:58 UTC  (7+ messages)
` [PATCH v2 1/3] net: mdio: Add the reset function for IPQ MDIO driver
` [PATCH v2 2/3] MDIO: Kconfig: Specify more IPQ chipset supported
` [PATCH v2 3/3] dt-bindings: net: Add the properties for ipq4019 MDIO

[PATCH V4 0/4] Add QSPI and QUPv3 DT nodes for SC7280 SoC
 2021-08-11 14:52 UTC  (15+ messages)
` [PATCH V4 1/4] arm64: dts: sc7280: Add QSPI node
` [PATCH V4 2/4] arm64: dts: sc7280: Add QUPv3 wrapper_0 nodes
` [PATCH V4 3/4] arm64: dts: sc7280: Update QUPv3 Debug UART DT node

[PATCH v4 1/2] arm64: dts: qcom: sc7280: Add gpu support
 2021-08-11 14:18 UTC  (2+ messages)
` [PATCH v4 2/2] arm64: dts: qcom: sc7280: Add gpu thermal zone cooling support

[PATCH net-next v4] dt-bindings: net: qcom,ipa: make imem interconnect optional
 2021-08-11 14:18 UTC 

[PATCH v1] media: camss: vfe: Don't use vfe->base before it's assigned
 2021-08-11 13:42 UTC  (4+ messages)

[PATCH 0/7] i2c: use proper DMAENGINE API for termination
 2021-08-11 13:26 UTC  (4+ messages)
` [PATCH 4/7] i2c: qup: : "

[PATCH 1/2] dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8019 support
 2021-08-11 13:03 UTC  (4+ messages)
` [PATCH 2/2] pinctrl: qcom-pmic-gpio: Add support for pm8019

[PATCH v3 0/6] interconnect: qcom: Add MSM8996 interconnect driver
 2021-08-11 12:56 UTC  (9+ messages)
` [PATCH v3 1/6] interconnect: qcom: icc-rpmh: Rename qcom_icc_set
` [PATCH v3 2/6] interconnect: qcom: sdm660: Commonize RPM-QoS
` [PATCH v3 3/6] dt-bindings: interconnect: Move SDM660 to a new RPM-QoS file
` [PATCH v3 4/6] dt-bindings: interconnect: Add Qualcomm MSM8996 DT bindings
` [PATCH v3 5/6] interconnect: qcom: Add MSM8996 interconnect provider driver
` [PATCH v3 6/6] arm64: dts: qcom: msm8996: Add interconnect support

[PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver
 2021-08-11 12:56 UTC  (4+ messages)

[PATCH V2 0/9] cpufreq: Auto-register with energy model
 2021-08-11 11:58 UTC  (2+ messages)
` [PATCH V2 6/9] cpufreq: qcom-cpufreq-hw: Use auto-registration for "

[RESEND PATCH V7 0/3] Convert qcom pmic gpio bindings to YAML
 2021-08-11 12:01 UTC  (7+ messages)
` [RESEND PATCH V7 2/3] dt-bindings: pinctrl: qcom-pmic-gpio: "
` [RESEND PATCH V7 3/3] dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property

[Patch v5 0/6] Introduce LMh driver for Qualcomm SoCs
 2021-08-11 11:27 UTC  (4+ messages)
` [Patch v5 3/6] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support

[PATCH 0/8] cpufreq: Auto-register with energy model
 2021-08-11 10:14 UTC  (19+ messages)
` [PATCH 6/8] cpufreq: qcom-cpufreq-hw: Use auto-registration for "

[PATCH v4 0/3] drivers/soc: Remove all strcpy() uses
 2021-08-11  9:38 UTC  (6+ messages)
` [PATCH v4 2/3] drivers/soc/renesas: Prefer memcpy over strcpy

[PATCH v5] arm64: dts: qcom: sc7280: Add venus DT node
 2021-08-11  8:04 UTC 

[PATCH v1 1/4] media: camss: vfe: Don't read hardware version needlessly
 2021-08-11  7:32 UTC  (3+ messages)

[PATCH v3 0/6] add fixes to pass DP Link Layer compliance test cases
 2021-08-11  7:20 UTC  (11+ messages)
` [PATCH v3 2/6] drm/msm/dp: reduce link rate if failed at link training 1
` [PATCH v3 4/6] drm/msm/dp: replug event is converted into an unplug followed by an plug events
` [PATCH v3 5/6] drm/msm/dp: return correct edid checksum after corrupted edid checksum read
` [PATCH v3 6/6] drm/msm/dp: do not end dp link training until video is ready

Request to update WCN6750 FW file
 2021-08-11  7:09 UTC  (2+ messages)

[PATCHv3] iommu/arm-smmu: Optimize ->tlb_flush_walk() for qcom implementation
 2021-08-11  6:09 UTC 

[PATCH V1 1/1] soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
 2021-08-11  4:25 UTC  (8+ messages)

[PATCH v1] cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
 2021-08-11  3:57 UTC  (2+ messages)

[PATCH v1] arm64: dts: qcom: sc7280: Add clock controller ID headers
 2021-08-11  0:42 UTC 

[PATCH v5] drm/msm/dsi: add continuous clock support for 7nm PHY
 2021-08-11  0:12 UTC  (2+ messages)

[PATCH] drm/msm/dsi: add support for dsi test pattern generator
 2021-08-10 23:24 UTC  (5+ messages)
      ` [Freedreno] "

[PATCH v2 1/2] drm/msm/dsi: update dsi register header file for tpg
 2021-08-10 23:01 UTC  (3+ messages)
` [PATCH v2 2/2] drm/msm/dsi: add support for dsi test pattern generator

[PATCHv2] iommu/arm-smmu: Add clk_bulk_{prepare/unprepare} to system pm callbacks
 2021-08-10 20:25 UTC  (2+ messages)

[PATCH v2] arm64: dts: qcom: sc7280: Add WPSS remoteproc node
 2021-08-10 19:51 UTC  (2+ messages)

[PATCH v5 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280
 2021-08-10 19:37 UTC  (8+ messages)
` [PATCH v5 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
` [PATCH v5 3/4] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
` [PATCH v5 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280

[PATCH v2] drm/msm/dp: add drm debug logs to dp_pm_resume/suspend
 2021-08-10 19:30 UTC  (6+ messages)

[PATCHv3] iommu/arm-smmu: Optimize ->tlb_flush_walk() for qcom implementation
 2021-08-10 18:08 UTC  (4+ messages)

[PATCH 0/2] Add support for sc7280 WPSS PIL loading
 2021-08-10 18:04 UTC  (3+ messages)

[PATCH V6 0/7] Add driver support for Data Capture and Compare Engine(DCC) for SM8150,SC7280,SC7180,SDM845
 2021-08-10 17:54 UTC  (8+ messages)
` [PATCH V6 1/7] dt-bindings: Added the yaml bindings for DCC
` [PATCH V6 2/7] soc: qcom: dcc:Add driver support for Data Capture and Compare unit(DCC)
` [PATCH V6 3/7] MAINTAINERS: Add the entry for DCC(Data Capture and Compare) driver support
` [PATCH V6 4/7] arm64: dts: qcom: sm8150: Add Data Capture and Compare(DCC) support node
` [PATCH V6 5/7] arm64: dts: qcom: sc7280: "
` [PATCH V6 6/7] arm64: dts: qcom: sc7180: "
` [PATCH V6 7/7] arm64: dts: qcom: sdm845: "

[PATCH 0/4] Add SCM and mailbox support on MSM8953
 2021-08-10 16:44 UTC  (5+ messages)
` [PATCH 1/4] dt-bindings: mailbox: Add compatible for the MSM8953
` [PATCH 2/4] mailbox: qcom-apcs-ipc: Add compatible for MSM8953 SoC
` [PATCH 3/4] dt-bindings: firmware: qcom-scm: Document msm8953 bindings
` [PATCH 4/4] firmware: qcom_scm: Add compatible for MSM8953 SoC

[PATCH 0/4] arm64: dts: qcom: IPA-related DTS updates
 2021-08-10 16:27 UTC  (3+ messages)
` [PATCH 4/4] arm64: dts: qcom: sm8350: fix IPA interconnects

[PATCH v3 0/7] Add support for Qualcomm QCA639x chips family
 2021-08-10 16:03 UTC  (9+ messages)
` [PATCH v3 2/7] regulator: qca6390: add support for QCA639x powerup sequence

[v6 0/3] Add L3 provider support for SC7280
 2021-08-10 12:46 UTC  (7+ messages)
` [v6 1/3] dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280
` [v6 2/3] interconnect: qcom: Add EPSS L3 support "
` [v6 3/3] arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider

[PATCH] pinctrl: qcom: spmi-gpio: Add pmc8180 & pmc8180c
 2021-08-10 12:38 UTC  (2+ messages)

[PATCH v6 0/6] clk: qcom: use power-domain for sm8250's clock controllers
 2021-08-10 11:11 UTC  (2+ messages)

[PATCH v2] drm/drv: Remove initialization of static variables
 2021-08-10  9:59 UTC 

[PATCH 0/3] iommu/drm/msm: Allow non-coherent masters to use system cache
 2021-08-10  9:54 UTC  (12+ messages)
` [Freedreno] "

[PATCH v4 0/7] media: venus: Enable venus support on sc7280
 2021-08-10  9:47 UTC  (8+ messages)
` [PATCH v4 1/7] venus: firmware: enable no tz fw loading for sc7280
` [PATCH v4 2/7] media: venus: core: Add sc7280 DT compatible and resource data
` [PATCH v4 3/7] media: venus: Add num_vpp_pipes to resource structure
` [PATCH v4 4/7] media: venus: hfi: Skip AON register programming for V6 1pipe
` [PATCH v4 5/7] venus: vdec: set work route to fw
` [PATCH v4 6/7] media: venus: helpers: update NUM_MBS macro calculation
` [PATCH v4 7/7] media: venus: Set buffer to FW based on FW min count requirement

[PATCH] iommu/arm-smmu: Add clk_bulk_{prepare/unprepare} to system pm callbacks
 2021-08-10  6:51 UTC  (4+ messages)

[v5 0/3] Add L3 provider support for SC7280
 2021-08-10  5:59 UTC  (3+ messages)
` [v5 2/3] interconnect: qcom: Add EPSS L3 support on SC7280
` [v5 3/3] arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).