messages from 2022-10-18 03:10:08 to 2022-10-19 15:47:52 UTC [more...]
[PATCH v3 0/4] arm64/pinctrl: dt-bindings: qcom: sc7180: convert to dtschema
2022-10-19 15:41 UTC (6+ messages)
` [PATCH v3 1/4] arm64: dts: qcom: sc7180-trogdor-homestar: fully configure secondary I2S pins
` [PATCH v3 2/4] arm64: dts: qcom: sc7180: revert "arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor"
` [PATCH v3 3/4] arm64: dts: qcom: sc7180: align TLMM pin configuration with DT schema
` [PATCH v3 4/4] dt-bindings: pinctrl: qcom,sc7180: convert to dtschema
` (subset) "
[PATCH] arm64: dts: qcom: qrb5165-rb5: Disable cpuidle states
2022-10-19 15:34 UTC (3+ messages)
[PATCH 0/2] PCI: qcom: Add basic interconnect support
2022-10-19 14:45 UTC (6+ messages)
` [PATCH 1/2] dt-bindings: PCI: qcom: Add SC8280XP/SA8540P interconnects
` [PATCH 2/2] PCI: qcom: Add basic interconnect support
[PATCH v3 1/3] arm64: dts: qcom: msm8996-sony-xperia-tone: drop incorrect wlan pin input
2022-10-19 14:44 UTC (4+ messages)
` [PATCH v3 2/3] arm64: dts: qcom: msm8996: align TLMM pin configuration with DT schema
` [PATCH v3 3/3] dt-bindings: pinctrl: qcom,msm8996: convert to dtschema
` (subset) "
[PATCH v4 1/4] arm64: dts: qcom: msm8998: add gpio-ranges to TLMM
2022-10-19 14:44 UTC (3+ messages)
` [PATCH v4 4/4] dt-bindings: pinctrl: qcom,msm8998: convert to dtschema
` (subset) "
[PATCH v3 1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin
2022-10-19 14:44 UTC (4+ messages)
` [PATCH v3 2/3] arm64: dts: qcom: msm8994: Align TLMM pin configuration with DT schema
` [PATCH v3 3/3] dt-bindings: pinctrl: qcom,msm8994: convert to dtschema
` (subset) "
[PATCH 1/2] dt-bindings: pinctrl: qcom,msm8974: convert to dtschema
2022-10-19 14:44 UTC (2+ messages)
` (subset) "
[PATCH] dt-bindings: pinctrl: qcom: drop minItems equal to maxItems
2022-10-19 14:44 UTC (2+ messages)
[PATCH v2] dt-bindings: pinctrl: qcom,sm8150: convert to dtschema
2022-10-19 14:44 UTC (2+ messages)
[PATCH 0/4] qcom-cpufreq-hw: Add CPU clock provider support
2022-10-19 13:59 UTC (5+ messages)
` [PATCH 1/4] cpufreq: qcom-hw: Remove un-necessary cpumask_empty() check
` [PATCH 2/4] dt-bindings: cpufreq: cpufreq-qcom-hw: Add cpufreq clock provider
` [PATCH 3/4] cpufreq: qcom-hw: Add CPU clock provider support
` [PATCH 4/4] arm64: dts: qcom: sm8450: Supply clock from cpufreq node to CPUs
[PATCH v2 00/15] phy: qcom-qmp-pcie: add support for sc8280xp
2022-10-19 13:52 UTC (31+ messages)
` [PATCH v2 01/15] phy: qcom-qmp-pcie: sort device-id table
` [PATCH v2 02/15] phy: qcom-qmp-pcie: move "
` [PATCH v2 03/15] phy: qcom-qmp-pcie: merge driver data
` [PATCH v2 04/15] phy: qcom-qmp-pcie: clean up device-tree parsing
` [PATCH v2 05/15] phy: qcom-qmp-pcie: clean up probe initialisation
` [PATCH v2 06/15] phy: qcom-qmp-pcie: rename PHY ops structure
` [PATCH v2 07/15] phy: qcom-qmp-pcie: clean up PHY lane init
` [PATCH v2 08/15] phy: qcom-qmp-pcie: add register init helper
` [PATCH v2 09/15] dt-bindings: phy: qcom,qmp-pcie: rename current bindings
` [PATCH v2 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings
` [PATCH v2 11/15] phy: qcom-qmp-pcie: restructure PHY creation
` [PATCH v2 12/15] phy: qcom-qmp-pcie: fix initialisation reset
` [PATCH v2 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock
` [PATCH v2 14/15] phy: qcom-qmp-pcie: add support for sc8280xp
` [PATCH v2 15/15] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs
[PATCH v3 0/2] Add LED driver for flash module in QCOM PMICs
2022-10-19 13:36 UTC (7+ messages)
` [PATCH v3 2/2] dt-bindings: add bindings for QCOM flash LED
[PATCH v2 0/2] Add dma gpi support for QDU1000/QRU1000 SoCs
2022-10-19 13:30 UTC (4+ messages)
` [PATCH v2 2/2] dmaengine: qcom: gpi: Add compatible for QDU1000 and QRU1000
[PATCH v6 0/4] SDM670 GPI DMA support
2022-10-19 12:48 UTC (2+ messages)
[PATCH v2 0/5] dma/arm64: qcom: use one compatible also for 0x10000 offset
2022-10-19 12:49 UTC (7+ messages)
` [PATCH v2 1/5] dt-bindings: dma: qcom: gpi: Use sm6350 fallback
` [PATCH v2 2/5] dmaengine: qcom: gpi: Document preferred SM6350 binding
` [PATCH v2 3/5] arm64: dts: qcom: sc7280: Add GPI DMA compatible fallback
` [PATCH v2 4/5] arm64: dts: qcom: sm8350: "
` [PATCH v2 5/5] arm64: dts: qcom: sm8450: "
[PATCH v2] dt-bindings: soundwire: Convert text file to yaml format
2022-10-19 12:42 UTC (3+ messages)
[PATCH v2] dt-bindings: mfd: qcom,tcsr: add sc8280xp binding
2022-10-19 12:22 UTC
[PATCH V17 0/7] soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC)
2022-10-19 10:49 UTC (4+ messages)
` [PATCH V17 2/7] "
[PATCH 00/15] phy: qcom-qmp-pcie: add support for sc8280xp
2022-10-19 9:33 UTC (22+ messages)
` [PATCH 09/15] dt-bindings: phy: qcom,qmp-pcie: mark current bindings as legacy
` [PATCH 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings
` [PATCH 13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock
[PATCH v2 00/17] Add Multi Circular Queue Support
2022-10-19 10:28 UTC (5+ messages)
` [PATCH v2 05/17] ufs: core: mcq: Introduce Multi Circular Queue
[RFC PATCH] drm/msm: lookup the ICC paths in both mdp5/dpu and mdss devices
2022-10-19 9:27 UTC (5+ messages)
[PATCH 03/44] serial: msm: Use uart_xmit_advance()
2022-10-19 9:11 UTC
[PATCH 6.0 054/862] regulator: qcom_rpm: Fix circular deferral regression
2022-10-19 8:22 UTC
[PATCH v1 1/1] drivers: remoteproc: Add bus scaling capability during bootup
2022-10-19 6:49 UTC (4+ messages)
[PATCH V3 0/2] SCM: Add support for wait-queue aware firmware
2022-10-19 6:14 UTC (5+ messages)
` [PATCH V3 1/2] dt-bindings: firmware: qcom-scm: Add optional interrupt
` [PATCH V3 2/2] firmware: qcom: scm: Add wait-queue handling logic
[PATCH] clk: qcom: Update the force mem core bit for GPU clocks
2022-10-19 6:05 UTC
[PATCH v1 00/15] create power sequencing subsystem
2022-10-19 6:03 UTC (3+ messages)
[PATCH v2 3/4] slimbus: qcom-ngd-ctrl: Make QMI message rules const
2022-10-18 22:25 UTC (2+ messages)
` [RESEND PATCH] "
[PATCH v2 0/3] Add base device tree files for QDU1000/QRU1000
2022-10-18 22:15 UTC (3+ messages)
` [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs
[PULL]: qcom: SC7180 and SC7280 venus firmware updates
2022-10-18 21:12 UTC
[PATCH v2 2/4] remoteproc: sysmon: Make QMI message rules const
2022-10-18 20:44 UTC (2+ messages)
` [RESEND PATCH] "
[PATCH v7 0/2] input: introduce support for Qualcomm SPMI haptics
2022-10-18 18:29 UTC (3+ messages)
` [PATCH v7 1/2] dt-bindings: input: document Qualcomm PMI8998 haptics driver
[PATCH] dt-bindings: pinctrl: qcom,ipq6018: replace maintainer
2022-10-18 16:18 UTC (2+ messages)
[PATCH v3 00/33] pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings (5th set)
2022-10-18 16:18 UTC (2+ messages)
[PATCH v3 2/2] PCI: qcom: Add support for modular builds
2022-10-18 16:08 UTC (4+ messages)
[PATCH v3 00/17] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings
2022-10-18 15:49 UTC (15+ messages)
` [PATCH v3 11/17] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names
` (subset) "
` [PATCH v3 12/17] dt-bindings: pinctrl: qcom,sm8250: use common TLMM pin schema
` (subset) "
` [PATCH v3 13/17] dt-bindings: pinctrl: qcom,sm8250: fix matching pin config
` (subset) "
` [PATCH v3 14/17] dt-bindings: pinctrl: qcom,sm8250: add input-enable
` (subset) "
` [PATCH v3 15/17] dt-bindings: pinctrl: qcom,sc7280: correct number of GPIOs
` (subset) "
` [PATCH v3 16/17] dt-bindings: pinctrl: qcom,sc7280: add bias-bus-hold and input-enable
` (subset) "
` [PATCH v3 17/17] dt-bindings: pinctrl: qcom,sc7280: use common TLMM pin schema
` (subset) "
[PATCH v3 0/6] soc: qcom: Add APSS RSC to the CPU cluster PM domain
2022-10-18 15:28 UTC (7+ messages)
` [PATCH v3 1/6] dt-bindings: soc: qcom: Update devicetree binding document for rpmh-rsc
` [PATCH v3 2/6] soc: qcom: rpmh-rsc: Attach RSC to cluster PM domain
` [PATCH v3 3/6] arm64: dts: qcom: Add power-domains property for apps_rsc
` [PATCH v3 4/6] PM: domains: Store the next hrtimer wakeup in genpd
` [PATCH v3 5/6] soc: qcom: rpmh-rsc: Save base address of drv
` [PATCH v3 6/6] soc: qcom: rpmh-rsc: Write CONTROL_TCS with next timer wakeup
[PATCH] Revert "arm64: dts: qcom: sm8250: Add cpuidle states"
2022-10-18 14:31 UTC (5+ messages)
[PATCH 0/5] dma/arm64: qcom: use one compatible also for 0x10000 offset
2022-10-18 13:45 UTC (7+ messages)
` [PATCH 3/5] arm64: dts: qcom: sc7280: Add GPI DMA compatible fallback
` [PATCH 4/5] arm64: dts: qcom: sm8350: "
` [PATCH 5/5] arm64: dts: qcom: sm8450: "
[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers
2022-10-18 13:07 UTC (7+ messages)
` [PATCH v2 36/36] pinctrl: Clean up headers
[RESEND PATCH v2 0/5] SCM: Add support for wait-queue aware firmware
2022-10-18 13:11 UTC (8+ messages)
` [RESEND PATCH v2 1/5] dt-bindings: firmware: qcom-scm: Add "allow-multi-call" property
` [RESEND PATCH v2 3/5] dt-bindings: firmware: qcom-scm: Add optional interrupt
[PATCH] dt-bindings: PCI: qcom-ep: Fix PERST register description
2022-10-18 13:04 UTC (2+ messages)
[PATCH v7 00/21] Move all drivers to a common dma-buf locking convention
2022-10-18 12:49 UTC (4+ messages)
[PATCH] spi: qup: support using GPIO as chip select line
2022-10-18 11:01 UTC (2+ messages)
[PATCH v2 1/3] cpufreq: qcom: fix memory leak in error path
2022-10-18 10:37 UTC (2+ messages)
[PATCH 0/2] iommu: SMMU for SDM670
2022-10-18 10:21 UTC (8+ messages)
` [PATCH 2/2] iommu: arm-smmu-qcom: add sdm670 compatible
[PATCH RESEND v2] Bluetooth: btqcomsmd: Fix command timeout after setting BD address
2022-10-18 8:54 UTC
[PATCH v3 0/1] i2c: qcom-cci: pm runtime ordering fix
2022-10-18 9:17 UTC (3+ messages)
` [PATCH v3 1/1] i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
[PATCH v4 0/4] media: camss: sm8250: Virtual channels support for SM8250
2022-10-18 7:48 UTC (4+ messages)
[PATCH v2] soc: qcom: rpmhpd: Use highest corner until sync_state
2022-10-18 3:14 UTC (6+ messages)
[PATCH] arm64: dts: qcom: sc7280: Add required-opps for i2c
2022-10-18 3:14 UTC (2+ messages)
[PATCH v9 1/4] dt-bindings: mailbox: qcom: set correct #clock-cells
2022-10-18 3:14 UTC (2+ messages)
` (subset) "
[PATCH v8 1/5] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074
2022-10-18 3:14 UTC (2+ messages)
` (subset) "
[PATCH] soc: move from strlcpy with unused retval to strscpy
2022-10-18 3:15 UTC (2+ messages)
[PATCH v4 0/7] remoteproc: qcom_q6v5_mss: Add MSM8909 and MSM8953
2022-10-18 3:15 UTC (2+ messages)
` (subset) "
[PATCH] arm64: dts: qcom: sm8450: Add description of camera control interfaces
2022-10-18 3:15 UTC (2+ messages)
[PATCH v7 1/5] dt-bindings: thermal: tsens: Add ipq8074 compatible
2022-10-18 3:14 UTC (2+ messages)
` (subset) "
[PATCH 1/2] arm64: dts: qcom: cp01-c1: remove bootargs-append
2022-10-18 3:14 UTC (2+ messages)
` (subset) "
[PATCH 1/2] arm64: dts: qcom: ipq6018: fix NAND node name
2022-10-18 3:14 UTC (2+ messages)
` (subset) "
[PATCH v3 1/9] clk: qcom: clk-rcg2: add rcg2 mux ops
2022-10-18 3:14 UTC (2+ messages)
` (subset) "
[PATCH v3 1/2] dt-bindings: arm: qcom: Document additional skus for sc7180 pazquel360
2022-10-18 3:15 UTC (2+ messages)
` (subset) "
[PATCH RESEND 1/2] soc: qcom: cmd-db: Mark device as having no PM support
2022-10-18 3:15 UTC (2+ messages)
[PATCH v2 0/5] remoteproc: qcom_q6v5_mss: Add MSM8909
2022-10-18 3:15 UTC (2+ messages)
` (subset) "
[v1] arm64: dts: qcom: sc7280: assign DSI clock source parents
2022-10-18 3:14 UTC (2+ messages)
[PATCH v2] arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280
2022-10-18 3:14 UTC (2+ messages)
[PATCH v13 0/3] Add QCOM SNPS PHY overriding params support
2022-10-18 3:14 UTC (2+ messages)
` (subset) "
[PATCH] arm64: dts: qcom: sc7180: Add required-opps for USB
2022-10-18 3:14 UTC (2+ messages)
[PATCH 0/4] Make QMI message rules const
2022-10-18 3:14 UTC (3+ messages)
` [PATCH v2 "
[PATCH] arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280
2022-10-18 3:14 UTC (2+ messages)
[PATCH v4 0/4] SDM670 GPI DMA support
2022-10-18 3:05 UTC (2+ messages)
` (subset) "
[PATCH v2] arm64: dts: qcom: sc7180: Configure USB as wakeup source
2022-10-18 3:06 UTC (2+ messages)
[PATCH v4 0/3] MDSS support for MSM8953
2022-10-18 3:05 UTC (2+ messages)
` (subset) "
[PATCH v6 0/3] Initial Samsung Galaxy Tab 4 10.1 (SM-T530) support
2022-10-18 3:06 UTC (2+ messages)
` (subset) "
[PATCH v2 0/2] SDM670 Power Domains
2022-10-18 3:05 UTC (2+ messages)
[PATCH] ARM: dts: qcom: pmx65: use node name "gpio" for spmi-gpio
2022-10-18 3:05 UTC (2+ messages)
[PATCH] ARM: dts: qcom: msm8974-sony-*: fix multi-led node name
2022-10-18 3:05 UTC (2+ messages)
[PATCH] ARM: dts: qcom: msm8974: Remove bogus *-cells from smd-edge
2022-10-18 3:05 UTC (2+ messages)
[PATCH v4 1/2] soc: qcom: spmi-pmic: convert hex numbers to lowercase
2022-10-18 3:05 UTC (2+ messages)
` (subset) "
[PATCH] ARM: dts: qcom: add 'chassis-type' property
2022-10-18 3:05 UTC (2+ messages)
[PATCH] arm64: dts: qcom: msm8996: remove bogus ufs_variant node
2022-10-18 3:05 UTC (2+ messages)
[PATCH 1/3] ARM: dts: qcom: ipq8064-rb3011: fix nand node validation
2022-10-18 3:05 UTC (2+ messages)
` (subset) "
[PATCH] ARM: dts: qcom: fix node name for rpm-msg-ram
2022-10-18 3:05 UTC (2+ messages)
[PATCH 1/5] dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing compatibles
2022-10-18 3:05 UTC (2+ messages)
` (subset) "
[PATCH v4 0/3] ARM/hwlock: qcom: switch TCSR mutex to MMIO (msm8974)
2022-10-18 3:05 UTC (2+ messages)
` (subset) "
[RESEND PATCH v2 1/4] dt-bindings: soc: qcom: smd-rpm: add PMIC regulators nodes
2022-10-18 3:05 UTC (2+ messages)
` (subset) "
[PATCH v4 00/34] pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings (third set)
2022-10-18 3:05 UTC (2+ messages)
` (subset) "
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).