messages from 2022-12-21 02:05:31 to 2022-12-22 19:07:20 UTC [more...]
[PATCH] arm64: dts: qcom: sdm845-tama: Add volume up and camera GPIO keys
2022-12-22 19:06 UTC
[PATCH 1/7] arm64: dts: qcom: sm8450: add spmi node
2022-12-22 19:03 UTC (3+ messages)
` [PATCH 4/7] arm64: dts: qcom: sm8450-nagara: Add GPIO keys
[PATCH v2] arm64: dts: qcom: sm8350-sagami: Rectify GPIO keys
2022-12-22 19:02 UTC (2+ messages)
[PATCH v2 0/3] Qcom: Add GIC-ITS support to SM8450 PCIe controllers
2022-12-22 19:01 UTC (5+ messages)
` [PATCH v2 1/3] dt-bindings: PCI: qcom: Update maintainers
` [PATCH v2 2/3] dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
` [PATCH v2 3/3] arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1
[PATCH v4 1/4] arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name
2022-12-22 18:53 UTC (9+ messages)
` [PATCH v4 2/4] arm64: dts: qcom: sdm845-xiaomi-beryllium: "
` [PATCH v4 3/4] arm64: dts: qcom: sdm845: align TLMM pin configuration with DT schema
` [PATCH v4 4/4] arm64: dts: qcom: sdm845: do not customize SPI0 pin drive/bias
[PATCH] irqchip: gic-v3: Handle failure case of CPU enters low power state
2022-12-22 18:35 UTC
[PATCH v14 0/5] Add data-lanes and link-frequencies to dp_out endpoint
2022-12-22 16:22 UTC (4+ messages)
` [PATCH v14 1/5] arm64: dts: qcom: add data-lanes and link-freuencies into "
[PATCH v2] dt-bindings: pinctrl: qcom,sm8450-lpass-lpi: add input-enable and bias-bus-hold
2022-12-22 16:14 UTC
[PATCH v4 0/5] Improve GPU reset sequence for Adreno GPU
2022-12-22 16:09 UTC (10+ messages)
` [PATCH v4 1/5] PM: domains: Allow a genpd consumer to require a synced power off
` [PATCH v4 2/5] clk: qcom: gdsc: Support 'synced_poweroff' genpd flag
` [PATCH v4 3/5] drm/msm/a6xx: Vote for cx gdsc from gpu driver
` [PATCH v4 4/5] drm/msm/a6xx: Remove cx gdsc polling using 'reset'
` [PATCH v4 5/5] drm/msm/a6xx: Use genpd notifier to ensure cx-gdsc collapse
[PATCH] dt-bindings: pinctrl: qcom,sm8450-lpass-lpi: add bias-bus-hold
2022-12-22 16:09 UTC
[PATCH] dt-bindings: phy: qcom,usb-hsic-phy: convert to DT schema
2022-12-22 15:58 UTC
[PATCH v10 00/15] Add PSR support for eDP
2022-12-22 15:05 UTC (16+ messages)
` [PATCH v10 01/15] drm/msm/disp/dpu: cache crtc obj in the dpu_encoder during initialization
` [PATCH v10 02/15] drm: add helper functions to retrieve old and new crtc
` [PATCH v10 03/15] drm/msm/dp: use atomic callbacks for DP bridge ops
` [PATCH v10 04/15] drm/msm/dp: Add basic PSR support for eDP
` [PATCH v10 05/15] drm/msm/dp: use the eDP bridge ops to validate eDP modes
` [PATCH v10 06/15] drm/msm/dp: disable self_refresh_aware after entering psr
` [PATCH v10 07/15] drm/bridge: use atomic enable/disable callbacks for panel bridge
` [PATCH v10 08/15] drm/bridge: add psr support for panel bridge callbacks
` [PATCH v10 09/15] drm/msm/disp/dpu: use atomic enable/disable callbacks for encoder functions
` [PATCH v10 10/15] drm/msm/disp/dpu: check for crtc enable rather than crtc active to release shared resources
` [PATCH v10 11/15] drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver
` [PATCH v10 12/15] drm/msm/disp/dpu: get timing engine status from intf status register
` [PATCH v10 13/15] drm/msm/disp/dpu: wait for extra vsync till timing engine status is disabled
` [PATCH v10 14/15] drm/msm/disp/dpu: reset the datapath after timing engine disable
` [PATCH v10 15/15] drm/msm/disp/dpu: clear active interface in the datapath cleanup
[PATCH v10 00/15] Add PSR support for eDP
2022-12-22 14:59 UTC
[PATCH v4 00/16] Qcom: LLCC/EDAC: Fix base address used for LLCC banks
2022-12-22 14:28 UTC (18+ messages)
` [PATCH v4 01/16] dt-bindings: arm: msm: Update the maintainers for LLCC
` [PATCH v4 02/16] dt-bindings: arm: msm: Fix register regions used for LLCC banks
` [PATCH v4 03/16] arm64: dts: qcom: sdm845: Fix the base addresses of "
` [PATCH v4 04/16] arm64: dts: qcom: sc7180: "
` [PATCH v4 05/16] arm64: dts: qcom: sc7280: "
` [PATCH v4 06/16] arm64: dts: qcom: sc8280xp: "
` [PATCH v4 07/16] arm64: dts: qcom: sm8150: "
` [PATCH v4 08/16] arm64: dts: qcom: sm8250: "
` [PATCH v4 09/16] arm64: dts: qcom: sm8350: "
` [PATCH v4 10/16] arm64: dts: qcom: sm8450: "
` [PATCH v4 11/16] arm64: dts: qcom: sm6350: "
` [PATCH v4 12/16] EDAC/device: Make use of poll_msec value in edac_device_ctl_info struct
` [PATCH v4 13/16] EDAC/qcom: Add platform_device_id table for module autoloading
` [PATCH v4 14/16] EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info
` [PATCH v4 15/16] qcom: llcc/edac: Fix the base address used for accessing LLCC banks
` [PATCH v4 16/16] qcom: llcc/edac: Support polling mode for ECC handling
[PATCH v5 00/23] ufs: qcom: Add HS-G4 support
2022-12-22 14:10 UTC (24+ messages)
` [PATCH v5 01/23] phy: qcom-qmp-ufs: Remove _tbl suffix from qmp_phy_init_tbl definitions
` [PATCH v5 02/23] phy: qcom-qmp-ufs: Rename MSM8996 PHY definitions
` [PATCH v5 03/23] phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tbls struct
` [PATCH v5 04/23] phy: qcom-qmp-ufs: Add support for configuring PHY in HS Series B mode
` [PATCH v5 05/23] phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 mode
` [PATCH v5 06/23] phy: qcom-qmp-ufs: Move HS Rate B register setting to tbls_hs_b
` [PATCH v5 07/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8150 SoC
` [PATCH v5 08/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoC
` [PATCH v5 09/23] phy: qcom-qmp-ufs: Avoid setting HS G3 specific registers
` [PATCH v5 10/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8350 SoC
` [PATCH v5 11/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8450 SoC
` [PATCH v5 12/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SC8280XP SoC
` [PATCH v5 13/23] scsi: ufs: ufs-qcom: Remove un-necessary goto statements
` [PATCH v5 14/23] scsi: ufs: ufs-qcom: Remove un-necessary WARN_ON()
` [PATCH v5 15/23] scsi: ufs: ufs-qcom: Use bitfields where appropriate
` [PATCH v5 16/23] scsi: ufs: ufs-qcom: Use dev_err_probe() for printing probe error
` [PATCH v5 17/23] scsi: ufs: ufs-qcom: Fix the Qcom register name for offset 0xD0
` [PATCH v5 18/23] scsi: ufs: core: Add reinit_notify() callback
` [PATCH v5 19/23] scsi: ufs: core: Add support for reinitializing the UFS device
` [PATCH v5 20/23] scsi: ufs: ufs-qcom: Factor out the logic finding the HS Gear
` [PATCH v5 21/23] scsi: ufs: ufs-qcom: Add support for reinitializing the UFS device
` [PATCH v5 22/23] scsi: ufs: ufs-qcom: Add support for finding max gear on new platforms
` [PATCH v5 23/23] MAINTAINERS: Add myself as the maintainer for Qcom UFS drivers
[PATCH 1/2] bus: mhi: core: add SBL state callback
2022-12-22 13:57 UTC (7+ messages)
` [PATCH 2/2] wifi: ath11k: use unique QRTR instance ID
[PATCH v7] PCI/ASPM: Update LTR threshold based upon reported max latencies
2022-12-22 13:39 UTC (6+ messages)
[PATCH v4 0/4] arm64: dts: qcom: sm6125: Enable APPS SMMU
2022-12-22 13:17 UTC (11+ messages)
` [PATCH v4 1/4] dt-bindings: arm-smmu: Document smmu-500 binding for SM6125
[PATCH v5 00/21] mdss-dsi-ctrl binding and dts fixes
2022-12-22 12:45 UTC (17+ messages)
` [PATCH v5 04/21] dt-bindings: msm: dsi-controller-main: Add compatible strings for every current SoC
` [PATCH v5 05/21] dt-bindings: msm: dsi-controller-main: Deprecate qcom,dsi-ctrl-6g-qcm2290 in favour of qcom,qcm2290-dsi-ctrl
` [PATCH v5 06/21] dt-bindings: msm: dsi-controller-main: Document clocks on a per compatible basis
` [PATCH v5 07/21] dt-bindings: msm: dsi-controller-main: Fix clock declarations
` [PATCH v5 08/21] dt-bindings: msm: dsi-controller-main: Add vdd* descriptions back in
` [PATCH v5 09/21] dt-bindings: display/msm: Add list of mdss-dsi-ctrl compats
` [PATCH v5 10/21] dt-bindings: display/msm: Update MDSS dsi compat strings
[PATCH v12 0/2] add device Xiaomi Mi 6 (codename sagit) and board binding
2022-12-22 11:59 UTC (3+ messages)
` [PATCH v12 2/2] arm64: dts: qcom: sagit: add initial device tree for sagit
[PATCH v15 0/5] Add data-lanes and link-frequencies to dp_out endpoint
2022-12-22 10:48 UTC (3+ messages)
` [PATCH v15 1/5] arm64: dts: qcom: add data-lanes and link-freuencies into "
[PATCH 0/2] Add resets for ADSP based audio clock controller driver
2022-12-22 10:44 UTC (10+ messages)
` [PATCH 1/2] dt-bindings: clock: SC7280: Add resets for LPASS audio clock controller
` [PATCH 2/2] clk: qcom: lpasscc: Add resets for SC7280 audioreach "
[PATCH 0/7] Add SC7280 audioreach device tree nodes
2022-12-22 9:42 UTC (8+ messages)
` [PATCH 1/7] arm64: dts: qcom: sc7280: Extract audio nodes from common idp dtsi file
` [PATCH 2/7] arm64: dts: qcom: sc7280: audioreach: Add sound node
` [PATCH 3/7] arm64: dts: qcom: sc7280: audioreach: Add lpass pil node
` [PATCH 4/7] arm64: dts: qcom: sc7280: audioreach: Update lpasscc reg property
` [PATCH 5/7] arm64: dts: qcom: sc7280: audioreach: Add CGCR reset property
` [PATCH 6/7] arm64: dts: qcom: sc7280: audioreach: Update VA/RX/TX macro clock nodes
` [PATCH 7/7] arm64: dts: qcom: sc7280: audioreach: Disable legacy path "
[PATCH v4 1/4] dt-bindings: ufs: qcom: Add SM6125 compatible string
2022-12-22 3:57 UTC (6+ messages)
` [PATCH v4 2/4] arm64: dts: qcom: sm6125: Add UFS nodes
[PATCH v2 0/8] drm/msm: DSC Electric Boogaloo for sm8[12]50
2022-12-21 23:19 UTC (9+ messages)
` [PATCH v2 1/8] drm/msm/dpu: Wire up DSC mask for active CTL configuration
` [PATCH v2 2/8] drm/msm/dsi: Use DSC slice(s) packet size to compute word count
` [PATCH v2 3/8] drm/msm/dsi: Flip greater-than check for slice_count and slice_per_intf
` [PATCH v2 4/8] drm/msm/dpu: Disallow unallocated resources to be returned
` [PATCH v2 5/8] drm/msm/dpu: Reject topologies for which no DSC blocks are available
` [PATCH v2 6/8] drm/msm/dpu: Remove num_enc from topology struct in favour of num_dsc
` [PATCH v2 7/8] drm/msm/dpu: Implement DSC binding to PP block for CTL V1
` [PATCH v2 8/8] drm/msm/dpu: Add DSC configuration for SM8150 and SM8250
[RFC PATCH] iio: adc: qcom-spmi-vadc: Propagate fw node name/label to extend_name
2022-12-21 22:34 UTC (6+ messages)
[PATCH] arm64: dts: qcom: sm6115: Move SDHC node(s)'s 'pinctrl' properties to dts
2022-12-21 22:10 UTC (2+ messages)
[PATCH v3 0/7] dts: qcom: sc8280xp: add i2c, spi, and rng nodes
2022-12-21 20:44 UTC (4+ messages)
` [PATCH v3 7/7] arm64: dts: qcom: sc8280xp: add rng device tree node
[PATCH v4 00/15] thermal/drivers/tsens: specify nvmem cells in DT rather than parsing them manually
2022-12-21 20:15 UTC (27+ messages)
` [PATCH v4 03/20] dt-bindings: thermal: tsens: add per-sensor cells for msm8974
` [PATCH v4 04/20] thermal/drivers/tsens: Drop unnecessary hw_ids
` [PATCH v4 05/20] thermal/drivers/tsens: Drop msm8976-specific defines
` [PATCH v4 06/20] thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
` [PATCH v4 07/20] thermal/drivers/tsens: limit num_sensors to 9
` [PATCH v4 08/20] thermal/drivers/tsens: fix slope values for msm8939
` [PATCH v4 09/20] thermal/drivers/tsens: Support using nvmem cells for calibration data
` [PATCH v4 10/20] thermal/drivers/tsens: Support using nvmem cells for msm8974 calibration
` [PATCH v4 11/20] thermal/drivers/tsens: Rework legacy calibration data parsers
` [PATCH v4 12/20] thermal/drivers/tsens: Drop single-cell code for mdm9607
` [PATCH v4 13/20] thermal/drivers/tsens: Drop single-cell code for msm8939
` [PATCH v4 14/20] thermal/drivers/tsens: Drop single-cell code for msm8976/msm8956
` [PATCH v4 15/20] arm64: dts: qcom: msm8956: use SoC-specific compat for tsens
` [PATCH v4 16/20] arm64: dts: qcom: msm8916: specify per-sensor calibration cells
` [PATCH v4 17/20] arm64: dts: qcom: msm8976: "
` [PATCH v4 18/20] arm64: dts: qcom: qcs404: "
` [PATCH v4 19/20] ARM: dts: qcom-msm8974: "
` [PATCH v4 20/20] ARM: dts: qcom-apq8084: "
[PATCH 0/5] MSM8996 eMMC boot fix
2022-12-21 19:50 UTC (2+ messages)
[PATCH v9 00/15] Add PSR support for eDP
2022-12-21 19:43 UTC (5+ messages)
` [PATCH v9 01/15] drm/msm/disp/dpu: clear dpu_assign_crtc and get crtc from connector state instead of dpu_enc
[PATCH v3 0/5] Improve GPU reset sequence for Adreno GPU
2022-12-21 17:15 UTC (4+ messages)
` [PATCH v3 1/5] PM: domains: Allow a genpd consumer to require a synced power off
[PATCH v2] tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
2022-12-21 16:40 UTC
[PATCH V4 0/3] rpmsg signaling/flowcontrol patches
2022-12-21 16:28 UTC (5+ messages)
` [PATCH V4 1/3] rpmsg: core: Add signal API support
` [PATCH V4 3/3] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
[PATCH v2 1/4] drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()
2022-12-21 15:09 UTC (4+ messages)
` [PATCH v2 2/4] drm/msm: Fix failure paths in msm_drm_init()
` [PATCH v2 3/4] drm/msm/a6xx: Update a6xx gpu coredump
` [PATCH v2 4/4] drm/msm/a6xx: Update ROQ size in coredump
[PATCH V19 0/7] soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC)
2022-12-21 12:40 UTC (4+ messages)
` [PATCH V19 2/7] "
[PATCH] arm64: dts: qcom: sc7280: add display port audio
2022-12-21 8:12 UTC (2+ messages)
[PATCH v5 0/2] Add interconnect support for QDU1000/QRU1000 SoCs
2022-12-21 7:58 UTC (3+ messages)
` [PATCH v5 1/2] dt-bindings: interconnect: Add QDU1000/QRU1000 devices
[PATCH] tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
2022-12-21 7:49 UTC (3+ messages)
[PATCH v4 0/2] Update section header name check
2022-12-21 6:10 UTC (3+ messages)
` [PATCH v4 1/2] remoteproc: elf_loader: Update resource table "
` [PATCH v4 2/2] docs: remoteproc: Update section header name requirement
[PATCH v3 00/15] Qcom: LLCC/EDAC: Fix base address used for LLCC banks
2022-12-21 5:55 UTC (6+ messages)
` [PATCH v3 06/15] arm64: dts: qcom: sc8280xp: Fix the base addresses of "
[PATCH v3 0/2] Update section header name check
2022-12-21 5:54 UTC (5+ messages)
` [PATCH v3 1/2] remoteproc: elf_loader: Update resource table "
[PATCH] Update spmi driver removal API
2022-12-21 5:39 UTC (6+ messages)
` [PATCH] spmi: Add check for remove callback in spmi_drv_remove API
[PATCH] Add a check for remove callback in spmi driver removal API
2022-12-21 5:37 UTC (2+ messages)
` [PATCH] spmi: Add a check for remove callback when removing a SPMI driver
[PATCH v2] cpufreq: qcom-hw: Fix reading "reg" with address/size-cells != 2
2022-12-21 4:59 UTC (2+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).