messages from 2023-01-12 20:07:07 to 2023-01-13 14:55:33 UTC [more...]
[PATCH 0/6] Add APSS clock controller support for IPQ9574
2023-01-13 14:36 UTC (7+ messages)
` [PATCH 1/6] dt-bindings: clock: Add YAML schemas for QCOM A73 PLL
` [PATCH 2/6] clk: qcom: ipq9574: Enable APSS clock driver
` [PATCH 3/6] arm64: defconfig: Enable ipq6018 apss clock and PLL controller
` [PATCH 4/6] arm64: dts: qcom: ipq9574: Add support for APSS clock controller
` [PATCH 5/6] dt-bindings: mailbox: Add compatible for IPQ9574
` [PATCH 6/6] clk: qcom: Fix APSS PLL and RCG Configuration
[PATCH 0/7] Add minimal boot support for IPQ9574
2023-01-13 14:30 UTC (38+ messages)
` [PATCH 1/7] dt-bindings: arm64: ipq9574: Add binding descriptions for clock and reset
` [PATCH 3/7] dt-bindings: pinctrl: qcom: Add ipq9574 pinctrl bindings
` [PATCH 4/7] pinctrl: qcom: Add IPQ9574 pinctrl driver
` [PATCH 5/7] dt-bindings: qcom: Add ipq9574 bindings
` [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
` [PATCH 7/7] arm64: defconfig: Enable IPQ9574 SoC base configs
` [PATCH 2/7] clk: qcom: Add Global Clock Controller driver for IPQ9574
[PATCH v2] dt-bindings: PCI: qcom,pcie-ep: correct qcom,perst-regs
2023-01-13 14:23 UTC (5+ messages)
[PATCH] arm64: dts: qcom: sc8280xp: Define CMA region for CRD and X13s
2023-01-13 14:17 UTC (2+ messages)
[PATCH v3 00/14] clk: qcom: cpu-8996: stability fixes
2023-01-13 14:13 UTC (20+ messages)
` [PATCH v3 01/14] dt-bindings: clock: qcom,msm8996-apcc: add sys_apcs_aux clock
` [PATCH v3 02/14] clk: qcom: clk-alpha-pll: program PLL_TEST/PLL_TEST_U if required
` [PATCH v3 03/14] clk: qcom: cpu-8996: correct PLL programming
` [PATCH v3 04/14] clk: qcom: cpu-8996: fix the init clock rate
` [PATCH v3 05/14] clk: qcom: cpu-8996: support using GPLL0 as SMUX input
` [PATCH v3 06/14] clk: qcom: cpu-8996: skip ACD init if the setup is valid
` [PATCH v3 07/14] clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb
` [PATCH v3 08/14] clk: qcom: cpu-8996: setup PLLs before registering clocks
` [PATCH v3 09/14] clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call
` [PATCH v3 10/14] clk: qcom: cpu-8996: fix PLL configuration sequence
` [PATCH v3 11/14] clk: qcom: cpu-8996: fix ACD initialization
` [PATCH v3 12/14] clk: qcom: cpu-8996: fix PLL clock ops
` [PATCH v3 13/14] clk: qcom: cpu-8996: change setup sequence to follow vendor kernel
` [PATCH v3 14/14] arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
[PATCH v2 0/7] watchdog: dt-bindings: rework/fix qcom-wdt
2023-01-13 14:03 UTC (15+ messages)
` [PATCH v2 1/7] dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019
` [PATCH v2 2/7] dt-bindings: watchdog: qcom-wdt: do not allow fallback alone
` [PATCH v2 3/7] dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles
` [PATCH v2 4/7] dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615
` [PATCH v2 5/7] dt-bindings: watchdog: qcom-wdt: allow interrupts
` [PATCH v2 6/7] dt-bindings: watchdog: qcom-wdt: merge MSM timer
` [PATCH v2 7/7] dt-bindings: watchdog: allow "timer" as node name
[PATCH 00/13] clk: qcom: cpu-8996: stability fixes
2023-01-13 14:02 UTC (15+ messages)
` [PATCH 09/13] clk: qcom: cpu-8996: fix PLL configuration sequence
` [PATCH 10/13] clk: qcom: cpu-8996: fix ACD initialization
` [PATCH 11/13] clk: qcom: cpu-8996: fix PLL clock ops
[RESEND PATCH 1/2] clk: qcom: clk-rcg2: introduce support for multiple conf for same freq
2023-01-13 13:50 UTC (3+ messages)
[PATCH V4] clk: qcom: clk-alpha-pll: Add support for Stromer PLLs
2023-01-13 13:36 UTC (3+ messages)
[PATCH 7/9] PCI: qcom: add support for IPQ8074 Gen3 port
2023-01-13 13:33 UTC (3+ messages)
[PATCH v6 0/6] Krait Documentation conversion
2023-01-13 13:18 UTC (6+ messages)
` [PATCH v6 2/6] dt-bindings: arm: msm: Convert and split kpss-acc driver Documentation to yaml
` [PATCH v6 3/6] dt-bindings: arm: msm: Rework kpss-gcc "
[PATCH v3 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible
2023-01-13 13:01 UTC (7+ messages)
` [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
[PATCH v2] dt-bindings: pinctrl: qcom,sdm845-pinctrl: add GPIO hogs
2023-01-13 10:51 UTC (2+ messages)
[PATCH 1/9] dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: correct pins pattern
2023-01-13 10:50 UTC (14+ messages)
` [PATCH 2/9] dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: add input-enable and bias-bus-hold
` (subset) "
` [PATCH 3/9] dt-bindings: pinctrl: qcom,sm6350-tlmm: add gpio-line-names
` (subset) "
` [PATCH 4/9] dt-bindings: pinctrl: qcom,sm8350-tlmm: "
` (subset) "
` [PATCH 5/9] dt-bindings: pinctrl: qcom,sm6350-tlmm: correct pins pattern
` (subset) "
` [PATCH 6/9] dt-bindings: pinctrl: qcom,sm8350-tlmm: "
` (subset) "
` [PATCH 7/9] dt-bindings: pinctrl: qcom: allow nine interrupts on SM6350
` (subset) "
` (subset) [PATCH 1/9] dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: correct pins pattern
[PATCH v6 00/20] thermal/drivers/tsens: specify nvmem cells in DT rather than parsing them manually
2023-01-13 10:32 UTC (3+ messages)
[RESEND PATCH] dt-bindings: thermal: qcom-spmi-adc-tm5: add qcom,adc-tm7
2023-01-13 10:24 UTC (2+ messages)
[PATCH] drm/probe_helper: sort out poll_running vs poll_enabled
2023-01-13 9:47 UTC (6+ messages)
[PATCH v2 0/4] clk: qcom: msm8996: add APCS clock driver
2023-01-13 9:07 UTC (5+ messages)
` [PATCH v2 1/4] dt-bindings: mailbox: qcom: correct the list of platforms using clocks
` [PATCH v2 2/4] dt-bindings: mailbox: qcom: add #clock-cells to msm8996 example
` [PATCH v2 3/4] mailbox: qcom-apcs-ipc: enable APCS clock device for MSM8996
` [PATCH v2 4/4] clk: qcom: add the driver for the MSM8996 APCS clocks
[PATCH] drm/msm: Initialize mode_config earlier
2023-01-13 8:57 UTC (3+ messages)
[PATCH v6 0/2] clk: qcom: Add clocks for the QDU1000 and QRU1000 SoCs
2023-01-13 8:43 UTC (5+ messages)
` [PATCH v6 1/2] dt-bindings: clock: Add QDU1000 and QRU1000 GCC clocks
` [PATCH v6 2/2] clk: qcom: Add QDU1000 and QRU1000 GCC support
[PATCH 0/8] Modem support for MSM8226
2023-01-13 8:41 UTC (14+ messages)
` [PATCH 1/8] dt-bindings: remoteproc: qcom,msm8916-mss-pil: Add MSM8226
` [PATCH 2/8] remoteproc: qcom_q6v5_mss: Handle platforms with only single power domain
` [PATCH 3/8] remoteproc: qcom_q6v5_mss: Add modem support on MSM8226
` [PATCH 4/8] dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
` [PATCH 5/8] ARM: dts: qcom: msm8226: Add node for TCSR halt regs
` [PATCH 6/8] ARM: dts: qcom: msm8226: Add smsm node
` [PATCH 7/8] ARM: dts: qcom: msm8226: Add modem remoteproc node
` [PATCH 8/8] ARM: dts: qcom: apq8026-samsung-matisse-wifi: Enable modem
[PATCH v6 00/11] dt-bindings: display/msm: rework MDP5 and MDSS schema
2023-01-13 8:37 UTC (12+ messages)
` [PATCH v6 01/11] dt-bindings: display/msm: convert MDP5 schema to YAML format
` [PATCH v6 02/11] dt-bindings: display/msm: add SoC-specific compats to qcom,mdp5.yaml
` [PATCH v6 03/11] dt-bindings: display/msm: add core clock to the mdss bindings
` [PATCH v6 04/11] dt-bindings: display/msm: rename mdss nodes to display-subsystem
` [PATCH v6 05/11] dt-bindings: display/msm: rename mdp nodes to display-controller
` [PATCH v6 06/11] ARM: dts: qcom-msm8974: add SoC specific compat string to mdp5 node
` [PATCH v6 07/11] arm64: dts: qcom: add SoC specific compat strings to mdp5 nodes
` [PATCH v6 08/11] arm64: dts: qcom: rename mdss nodes to display-subsystem
` [PATCH v6 09/11] ARM: dts: qcom-msm8974: rename mdss node "
` [PATCH v6 10/11] arm64: dts: qcom: rename mdp nodes to display-controller
` [PATCH v6 11/11] ARM: "
[PATCH v5 0/4] dt-bindings: display/msm: convert MDP5 schema to YAML format
2023-01-13 8:36 UTC (12+ messages)
` [PATCH v5 1/4] "
` [PATCH v5 2/4] dt-bindings: display/msm: add SoC-specific compats to qcom,mdp5.yaml
[PATCH v2] arm64: dts: qcom: sc7280: add display port audio
2023-01-13 8:19 UTC (3+ messages)
[PATCH] arm64: dts: qcom: sc7280: add display port audio
2023-01-13 8:11 UTC (5+ messages)
[PATCH V9 0/2] SCM: Add support for wait-queue aware firmware
2023-01-13 6:53 UTC (3+ messages)
` [PATCH V9 1/2] dt-bindings: firmware: qcom,scm: Add optional interrupt
` [PATCH V9 2/2] firmware: qcom: scm: Add wait-queue handling logic
[PATCH] dt-bindings: display/msm/dsi-phy: drop unused allOf clauses
2023-01-13 6:33 UTC
[PATCH v2] drm/msm/dpu: add hw revision 410
2023-01-13 4:39 UTC (2+ messages)
[PATCH] clk: qcom: Remove need for clk_ignore_unused on sc8280xp
2023-01-13 4:16 UTC (2+ messages)
[PATCH v2 0/4] soc: qcom: Introduce PMIC GLINK
2023-01-13 4:11 UTC (5+ messages)
` [PATCH v2 1/4] dt-bindings: soc: qcom: Introduce PMIC GLINK binding
` [PATCH v2 2/4] soc: qcom: pmic_glink: Introduce base PMIC GLINK driver
` [PATCH v2 3/4] soc: qcom: pmic_glink: Introduce altmode support
` [PATCH v2 4/4] power: supply: Introduce Qualcomm PMIC GLINK power supply
[PATCH] drm/msm/dpu: add hw revision 410
2023-01-13 3:56 UTC (2+ messages)
[PATCH v1] arm64: dts: qcom: sc7280: add display port audio
2023-01-13 3:31 UTC (2+ messages)
[PATCH 0/2] Tiny fixes around LMh
2023-01-13 3:14 UTC (3+ messages)
` [PATCH 1/2] thermal/drivers/qcom/lmh: Use driver data as flags instead of bool
` [PATCH 2/2] firmware: qcom_scm: Fully implement qcom_scm_lmh_dcvsh()
[PATCH 0/4] clk: qcom: msm8996: add APCS clock driver
2023-01-13 3:04 UTC (3+ messages)
` [PATCH 4/4] clk: qcom: add the driver for the MSM8996 APCS clocks
[PATCH v8 0/5] Add support for Core Power Reduction v3, v4 and Hardened
2023-01-13 1:26 UTC (3+ messages)
` [PATCH v8 2/5] dt-bindings: opp: v2-qcom-level: Let qcom,opp-fuse-level be a 2-long array
[PATCH v2 3/3] arm64: dts: qcom: msm8916-thwc: Add initial device tree for Tong Heng Wei Chuang Wifi/LTE dongle UFI-001C and uf896
2023-01-13 1:00 UTC (3+ messages)
[PATCH v2 00/16] clk: qcom: get rid of core_bi_pll_test_se
2023-01-13 0:36 UTC (17+ messages)
` [PATCH v2 08/16] clk: qcom: dispcc-qcm2290: get rid of test clock
` [PATCH v2 09/16] clk: qcom: gcc-msm8998: "
` [PATCH v2 10/16] clk: qcom: gcc-sc7180: "
` [PATCH v2 11/16] clk: qcom: gcc-sdx55: use ARRAY_SIZE instead of specifying num_parents
` [PATCH v2 12/16] clk: qcom: gcc-sdx55: get rid of test clock
` [PATCH v2 13/16] clk: qcom: gcc-sm8150: "
` [PATCH v2 14/16] clk: qcom: gcc-sm8350: "
` [PATCH v2 15/16] clk: qcom: mmcc-msm8998: "
[RFC PATCH 00/14] Introduce QC USB SND audio offloading support
2023-01-13 0:34 UTC (11+ messages)
` [RFC PATCH 07/14] usb: host: xhci: Add XHCI secondary interrupter support
[pull] drm/msm: drm-msm-fixes-2023-01-12 for v6.3-rc4
2023-01-12 22:47 UTC
[PATCH] clk: qcom: gdsc: Disable HW control until supported
2023-01-12 21:50 UTC (3+ messages)
[PATCH] dt-bindings: display/msm: qcom,mdss: fix HDMI PHY node names
2023-01-12 21:30 UTC (2+ messages)
[PATCH v6 0/2] Add base device tree files for QDU1000/QRU1000
2023-01-12 21:07 UTC (3+ messages)
` [PATCH v6 1/2] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs
` [PATCH v6 2/2] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
[PATCH 0/4] soc: qcom: socinfo: Add a bunch of older SoCs
2023-01-12 21:08 UTC (5+ messages)
` [PATCH 3/4] dt-bindings: arm: qcom,ids: "
[PATCH v6] dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
2023-01-12 20:41 UTC (2+ messages)
[PATCH] dt-bindings: ufs: qcom,ufs: document required-opps
2023-01-12 20:35 UTC (2+ messages)
[PATCH V3 00/10] Fix XPU violation during modem metadata authentication
2023-01-12 20:19 UTC (4+ messages)
` [PATCH V3 03/10] dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region
[PATCH v3 00/51] cpuidle,rcu: Clean up the mess
2023-01-12 19:44 UTC (11+ messages)
` [PATCH v3 02/51] x86/idle: Replace x86_idle with a static_call
` [PATCH v3 10/51] cpuidle,armada: Push RCU-idle into driver
` [PATCH v3 23/51] arm,smp: Remove trace_.*_rcuidle() usage
` [PATCH v3 24/51] arm64,smp: "
` [PATCH v3 26/51] time/tick-broadcast: Remove RCU_NONIDLE usage
` [PATCH v3 27/51] cpuidle,sched: Remove annotations from TIF_{POLLING_NRFLAG,NEED_RESCHED}
` [PATCH v3 33/51] trace: Remove trace_hardirqs_{on,off}_caller()
` [PATCH v3 42/51] ubsan: Fix objtool UACCESS warns
` [PATCH v3 50/51] cpuidle: Comments about noinstr/__cpuidle
` [PATCH v3 51/51] context_tracking: Fix noinstr vs KASAN
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).