linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joel Selvaraj <jo@jsfamily.in>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Srini Kandagatla <srinivas.kandagatla@linaro.org>
Cc: linux-arm-msm <linux-arm-msm@vger.kernel.org>,
	dt <devicetree@vger.kernel.org>,
	lkml <linux-kernel@vger.kernel.org>,
	phone-devel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	Joel Selvaraj <jo@jsfamily.in>,
	Amit Pundir <amit.pundir@linaro.org>
Subject: [RESEND PATCH] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add audio support
Date: Thu,  8 Apr 2021 01:37:53 +0530	[thread overview]
Message-ID: <BN6PR2001MB17963B035BEFCBC740FEB6A9D9759@BN6PR2001MB1796.namprd20.prod.outlook.com> (raw)

This patch adds audio support for Xiaomi Poco F1 phone. Phone's primary
Mic and 3.5mm Headphone jack are handled through the SDM845 sound card
and WCD9340 codec.

Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
---
 .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 117 ++++++++++++++++++
 1 file changed, 117 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index 86cbae63eaf7..5b5786595cdb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -5,6 +5,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm845.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
@@ -240,6 +242,28 @@ resin {
 	};
 };
 
+/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
+&q6afedai {
+	qi2s@22 {
+		reg = <22>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -257,6 +281,73 @@ &sdhc_2 {
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
 };
 
+&sound {
+	compatible = "qcom,db845c-sndcard";
+	pinctrl-0 = <&quat_mi2s_active
+			&quat_mi2s_sd0_active>;
+	pinctrl-names = "default";
+	model = "Xiaomi Poco F1";
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"AMIC3", "MIC BIAS3",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai =  <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
@@ -285,6 +376,15 @@ sdc2_card_det_n: sd-card-det-n {
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	wcd_intr_default: wcd_intr_default {
+		pins = <54>;
+		function = "gpio";
+
+		input-enable;
+		bias-pull-down;
+		drive-strength = <2>;
+	};
 };
 
 &uart6 {
@@ -345,6 +445,23 @@ &usb_1_qmpphy {
 	vdda-pll-supply = <&vreg_l1a_0p875>;
 };
 
+&wcd9340{
+	pinctrl-0 = <&wcd_intr_default>;
+	pinctrl-names = "default";
+	clock-names = "extclk";
+	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+	reset-gpios = <&tlmm 64 0>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,micbias1-microvolt = <2700000>;
+	qcom,micbias2-microvolt = <1800000>;
+	qcom,micbias3-microvolt = <2700000>;
+	qcom,micbias4-microvolt = <2700000>;
+};
+
 &wifi {
 	status = "okay";
 
-- 
2.25.1


             reply	other threads:[~2021-04-07 20:08 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-07 20:07 Joel Selvaraj [this message]
2021-04-07 20:13 ` [RESEND PATCH] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add audio support Stephan Gerhold
2021-04-12  9:32 ` Srinivas Kandagatla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BN6PR2001MB17963B035BEFCBC740FEB6A9D9759@BN6PR2001MB1796.namprd20.prod.outlook.com \
    --to=jo@jsfamily.in \
    --cc=agross@kernel.org \
    --cc=amit.pundir@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).