Re: [PATCH] arm64: dts: qcom: sc7180-trogdor: Update flash freq to match reality

[Doug Anderson <dianders@chromium.org>]

Hi,

On Tue, May 18, 2021 at 10:40 PM Stephen Boyd <swboyd@chromium.org> wrote:
>
> This spi flash part is actually being clocked at 37.5MHz, not 25MHz,
> because of the way the clk driver is rounding up the rate that is
> requested to the nearest supported frequency. Let's update the frequency
> here, and remove the TODO because this is the fastest frequency we're
> going to be able to use here.
>
> Cc: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index 24d293ef56d7..af3c0e1e2223 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -335,8 +335,7 @@ flash@0 {
>                 compatible = "jedec,spi-nor";
>                 reg = <0>;
>
> -               /* TODO: Increase frequency after testing */
> -               spi-max-frequency = <25000000>;
> +               spi-max-frequency = <37500000>;
>                 spi-tx-bus-width = <2>;
>                 spi-rx-bus-width = <2>;
>         };

Thanks. Looks right to me. I confirmed that the clock is 150 MHz in my
"clk_summary" which is 4x 37.5.

Reviewed-by: Douglas Anderson <dianders@chromium.org>


-Doug