[PATCH v6 0/6] irqchip: qcom: pdc: Introduce irq_set_wake call

[PATCH v6 0/6] irqchip: qcom: pdc: Introduce irq_set_wake call

[Maulik Shah]

Changes in v6:
- Update commit message more descriptive in v5 patch 1
- Symmetrically enable/disable wakeirqs during suspend/resume in v5 patch 3
- Include Acked-by and Reviewed-by tags from v5 series

Changes in v5:
- Update commit subject in v4 patch 1
- Add more details to commit message in v4 patch 2
- Add change to enable wake irqs during suspend using new flag in irqchip
- Use this in PDC and qcom pinctrl driver to enable wakeirqs on suspend
- Make for loop more readable and add more details in commit in v4 patch 7

Changes in v4:
- Drop "Remove irq_disable callback from msmgpio irqchip" patch from v3
- Introduce irq_suspend_one() and irq_resume_one() callbacks
- Use the new callbacks to unmask wake interrupts during suspend
- Reset only pdc interrupts that are mapped in DTSI

Changes in v3:
- Drop gpiolib change (v2 patch 1) since its already in linux-next
- Add Acked-by Linus Walleij for v2 patch 2 and v2 patch 3.
- Address Stephen's comment to on v2 patch 3
- Address Stephen's comment to change variable to static on v2 patch 4.
- Add a new change to use return value from .irq_set_wake callback
- Add a new change to reset PDC irq enable bank during init time

Changes in v2:
- Fix compiler error on gpiolib patch

This series adds support to lazy disable pdc interrupt.

Some drivers using gpio interrupts want to configure gpio for wakeup using
enable_irq_wake() but during suspend entry disables irq and expects system
to resume when interrupt occurs. In the driver resume call interrupt is
re-enabled and removes wakeup capability using disable_irq_wake() one such
example is cros ec driver.

With [1] in documentation saying "An irq can be disabled with disable_irq()
and still wake the system as long as the irq has wake enabled".

The PDC IRQs are currently "unlazy disabled" (disable here means that it
will be masked in PDC & GIC HW GICD_ISENABLER, the moment driver invokes
disable_irq()) such IRQs can not wakeup from low power modes like suspend
to RAM since the driver chosen to disable this.

During suspend entry, no one re-enable/unmask in HW, even if its marked for
wakeup.

One solutions thought to address this problem was...During suspend entry at
last point, irq chip driver re-enable/unmask IRQs in HW that are marked for
wakeup. This was attemped in [2].

This series adds alternate solution to [2] by "lazy disable" IRQs in HW.
The genirq takes care of lazy disable in case if irqchip did not implement
irq_disable callback. Below is high level steps on how this works out..

a. During driver's disable_irq() call, IRQ will be marked disabled in SW
b. IRQ will still be enabled(read unmasked in HW)
c. The device then enters low power mode like suspend to RAM
d. The HW detects unmasked IRQs and wakesup the CPU
e. During resume after local_irq_enable() CPU goes to handle the wake IRQ
f. Generic handler comes to know that IRQ is disabled in SW
g. Generic handler marks IRQ as pending and now invokes mask callback
h. IRQ gets disabled/masked in HW now
i. When driver invokes enable_irq() the SW pending IRQ leads IRQ's handler
j. enable_irq() will again enable/unmask in HW

[1] https://www.spinics.net/lists/kernel/msg3398294.html
[2] https://patchwork.kernel.org/patch/11466021/

Maulik Shah (6):
  pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND
    flags
  pinctrl: qcom: Use return value from irq_set_wake() call
  genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
  pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
  irqchip: qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
  irqchip: qcom-pdc: Reset PDC interrupts during init

 drivers/irqchip/qcom-pdc.c         | 14 +++++++++--
 drivers/pinctrl/qcom/pinctrl-msm.c | 11 +++++----
 include/linux/irq.h                | 49 +++++++++++++++++++++++---------------
 kernel/irq/debugfs.c               |  3 +++
 kernel/irq/pm.c                    | 34 ++++++++++++++++++++++----
 5 files changed, 81 insertions(+), 30 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v6 1/6] pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags

[Maulik Shah]

Both IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags are already
set for msmgpio's parent PDC irqchip but GPIO interrupts do not get masked
during suspend or during setting irq type since genirq checks irqchip flag
of msmgpio irqchip which forwards these calls to its parent PDC irqchip.

Add irqchip specific flags for msmgpio irqchip to mask non wakeirqs during
suspend and mask before setting irq type. Masking before changing type make
sures any spurious interrupt is not detected during this operation.

Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy")
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 drivers/pinctrl/qcom/pinctrl-msm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index a2567e7..1c23f5c 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -1243,6 +1243,8 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
 	pctrl->irq_chip.irq_release_resources = msm_gpio_irq_relres;
 	pctrl->irq_chip.irq_set_affinity = msm_gpio_irq_set_affinity;
 	pctrl->irq_chip.irq_set_vcpu_affinity = msm_gpio_irq_set_vcpu_affinity;
+	pctrl->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND |
+				IRQCHIP_SET_TYPE_MASKED;
 
 	np = of_parse_phandle(pctrl->dev->of_node, "wakeup-parent", 0);
 	if (np) {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v6 2/6] pinctrl: qcom: Use return value from irq_set_wake() call

[Maulik Shah]

msmgpio irqchip was not using return value of irq_set_irq_wake() callback
since previously GIC-v3 irqchip neither had IRQCHIP_SKIP_SET_WAKE flag nor
it implemented .irq_set_wake callback. This lead to irq_set_irq_wake()
return error -ENXIO.

However from 'commit 4110b5cbb014 ("irqchip/gic-v3: Allow interrupt to be
configured as wake-up sources")' GIC irqchip has IRQCHIP_SKIP_SET_WAKE
flag.

Use return value from irq_set_irq_wake() and irq_chip_set_wake_parent()
instead of always returning success.

Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy")
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 drivers/pinctrl/qcom/pinctrl-msm.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 1c23f5c..1df2322 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -1077,12 +1077,10 @@ static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
 	 * when TLMM is powered on. To allow that, enable the GPIO
 	 * summary line to be wakeup capable at GIC.
 	 */
-	if (d->parent_data)
-		irq_chip_set_wake_parent(d, on);
-
-	irq_set_irq_wake(pctrl->irq, on);
+	if (d->parent_data && test_bit(d->hwirq, pctrl->skip_wake_irqs))
+		return irq_chip_set_wake_parent(d, on);
 
-	return 0;
+	return irq_set_irq_wake(pctrl->irq, on);
 }
 
 static int msm_gpio_irq_reqres(struct irq_data *d)
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v6 3/6] genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag

[Maulik Shah]

An interrupt that is disabled/masked but set for wakeup still needs to
be able to wake up the system from sleep states like "suspend to RAM".

This change introduces IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag. If irqchip
have this flag set then irq PM will enable/unmask irqs that are marked
for wakeup but are in disabled state.

On resume such irqs will be restored back to disabled state.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 include/linux/irq.h  | 49 ++++++++++++++++++++++++++++++-------------------
 kernel/irq/debugfs.c |  3 +++
 kernel/irq/pm.c      | 34 ++++++++++++++++++++++++++++++----
 3 files changed, 63 insertions(+), 23 deletions(-)

diff --git a/include/linux/irq.h b/include/linux/irq.h
index 63b9d96..ccd39e2 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -217,6 +217,8 @@ struct irq_data {
  *				  from actual interrupt context.
  * IRQD_AFFINITY_ON_ACTIVATE	- Affinity is set on activation. Don't call
  *				  irq_chip::irq_set_affinity() when deactivated.
+ * IRQD_IRQ_ENABLED_ON_SUSPEND	- Interrupt is enabled on suspend by irq pm if
+ *				  irqchip have flag IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND set.
  */
 enum {
 	IRQD_TRIGGER_MASK		= 0xf,
@@ -242,6 +244,7 @@ enum {
 	IRQD_MSI_NOMASK_QUIRK		= (1 << 27),
 	IRQD_HANDLE_ENFORCE_IRQCTX	= (1 << 28),
 	IRQD_AFFINITY_ON_ACTIVATE	= (1 << 29),
+	IRQD_IRQ_ENABLED_ON_SUSPEND	= (1 << 30),
 };
 
 #define __irqd_to_state(d) ACCESS_PRIVATE((d)->common, state_use_accessors)
@@ -321,6 +324,11 @@ static inline bool irqd_is_handle_enforce_irqctx(struct irq_data *d)
 	return __irqd_to_state(d) & IRQD_HANDLE_ENFORCE_IRQCTX;
 }
 
+static inline bool irqd_is_enabled_on_suspend(struct irq_data *d)
+{
+	return __irqd_to_state(d) & IRQD_IRQ_ENABLED_ON_SUSPEND;
+}
+
 static inline bool irqd_is_wakeup_set(struct irq_data *d)
 {
 	return __irqd_to_state(d) & IRQD_WAKEUP_STATE;
@@ -547,27 +555,30 @@ struct irq_chip {
 /*
  * irq_chip specific flags
  *
- * IRQCHIP_SET_TYPE_MASKED:	Mask before calling chip.irq_set_type()
- * IRQCHIP_EOI_IF_HANDLED:	Only issue irq_eoi() when irq was handled
- * IRQCHIP_MASK_ON_SUSPEND:	Mask non wake irqs in the suspend path
- * IRQCHIP_ONOFFLINE_ENABLED:	Only call irq_on/off_line callbacks
- *				when irq enabled
- * IRQCHIP_SKIP_SET_WAKE:	Skip chip.irq_set_wake(), for this irq chip
- * IRQCHIP_ONESHOT_SAFE:	One shot does not require mask/unmask
- * IRQCHIP_EOI_THREADED:	Chip requires eoi() on unmask in threaded mode
- * IRQCHIP_SUPPORTS_LEVEL_MSI	Chip can provide two doorbells for Level MSIs
- * IRQCHIP_SUPPORTS_NMI:	Chip can deliver NMIs, only for root irqchips
+ * IRQCHIP_SET_TYPE_MASKED:           Mask before calling chip.irq_set_type()
+ * IRQCHIP_EOI_IF_HANDLED:            Only issue irq_eoi() when irq was handled
+ * IRQCHIP_MASK_ON_SUSPEND:           Mask non wake irqs in the suspend path
+ * IRQCHIP_ONOFFLINE_ENABLED:         Only call irq_on/off_line callbacks
+ *                                    when irq enabled
+ * IRQCHIP_SKIP_SET_WAKE:             Skip chip.irq_set_wake(), for this irq chip
+ * IRQCHIP_ONESHOT_SAFE:              One shot does not require mask/unmask
+ * IRQCHIP_EOI_THREADED:              Chip requires eoi() on unmask in threaded mode
+ * IRQCHIP_SUPPORTS_LEVEL_MSI:        Chip can provide two doorbells for Level MSIs
+ * IRQCHIP_SUPPORTS_NMI:              Chip can deliver NMIs, only for root irqchips
+ * IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND:  Invokes __enable_irq()/__disable_irq() for wake irqs
+ *                                    in the suspend path if they are in disabled state
  */
 enum {
-	IRQCHIP_SET_TYPE_MASKED		= (1 <<  0),
-	IRQCHIP_EOI_IF_HANDLED		= (1 <<  1),
-	IRQCHIP_MASK_ON_SUSPEND		= (1 <<  2),
-	IRQCHIP_ONOFFLINE_ENABLED	= (1 <<  3),
-	IRQCHIP_SKIP_SET_WAKE		= (1 <<  4),
-	IRQCHIP_ONESHOT_SAFE		= (1 <<  5),
-	IRQCHIP_EOI_THREADED		= (1 <<  6),
-	IRQCHIP_SUPPORTS_LEVEL_MSI	= (1 <<  7),
-	IRQCHIP_SUPPORTS_NMI		= (1 <<  8),
+	IRQCHIP_SET_TYPE_MASKED			= (1 <<  0),
+	IRQCHIP_EOI_IF_HANDLED			= (1 <<  1),
+	IRQCHIP_MASK_ON_SUSPEND			= (1 <<  2),
+	IRQCHIP_ONOFFLINE_ENABLED		= (1 <<  3),
+	IRQCHIP_SKIP_SET_WAKE			= (1 <<  4),
+	IRQCHIP_ONESHOT_SAFE			= (1 <<  5),
+	IRQCHIP_EOI_THREADED			= (1 <<  6),
+	IRQCHIP_SUPPORTS_LEVEL_MSI		= (1 <<  7),
+	IRQCHIP_SUPPORTS_NMI			= (1 <<  8),
+	IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND	= (1 <<  9),
 };
 
 #include <linux/irqdesc.h>
diff --git a/kernel/irq/debugfs.c b/kernel/irq/debugfs.c
index acabc0c..e4cff35 100644
--- a/kernel/irq/debugfs.c
+++ b/kernel/irq/debugfs.c
@@ -57,6 +57,7 @@ static const struct irq_bit_descr irqchip_flags[] = {
 	BIT_MASK_DESCR(IRQCHIP_EOI_THREADED),
 	BIT_MASK_DESCR(IRQCHIP_SUPPORTS_LEVEL_MSI),
 	BIT_MASK_DESCR(IRQCHIP_SUPPORTS_NMI),
+	BIT_MASK_DESCR(IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND),
 };
 
 static void
@@ -125,6 +126,8 @@ static const struct irq_bit_descr irqdata_states[] = {
 	BIT_MASK_DESCR(IRQD_DEFAULT_TRIGGER_SET),
 
 	BIT_MASK_DESCR(IRQD_HANDLE_ENFORCE_IRQCTX),
+
+	BIT_MASK_DESCR(IRQD_IRQ_ENABLED_ON_SUSPEND),
 };
 
 static const struct irq_bit_descr irqdesc_states[] = {
diff --git a/kernel/irq/pm.c b/kernel/irq/pm.c
index c6c7e18..ce0adb2 100644
--- a/kernel/irq/pm.c
+++ b/kernel/irq/pm.c
@@ -69,12 +69,26 @@ void irq_pm_remove_action(struct irq_desc *desc, struct irqaction *action)
 
 static bool suspend_device_irq(struct irq_desc *desc)
 {
+	unsigned long chipflags = irq_desc_get_chip(desc)->flags;
+	struct irq_data *irqd = &desc->irq_data;
+
 	if (!desc->action || irq_desc_is_chained(desc) ||
 	    desc->no_suspend_depth)
 		return false;
 
-	if (irqd_is_wakeup_set(&desc->irq_data)) {
-		irqd_set(&desc->irq_data, IRQD_WAKEUP_ARMED);
+	if (irqd_is_wakeup_set(irqd)) {
+		irqd_set(irqd, IRQD_WAKEUP_ARMED);
+
+		if ((chipflags & IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND) &&
+		     irqd_irq_disabled(irqd)) {
+			/*
+			 * Interrupt marked for wakeup is in disabled state.
+			 * Enable interrupt here to unmask/enable in irqchip
+			 * to be able to resume with such interrupts.
+			 */
+			__enable_irq(desc);
+			irqd_set(irqd, IRQD_IRQ_ENABLED_ON_SUSPEND);
+		}
 		/*
 		 * We return true here to force the caller to issue
 		 * synchronize_irq(). We need to make sure that the
@@ -93,7 +107,7 @@ static bool suspend_device_irq(struct irq_desc *desc)
 	 * chip level. The chip implementation indicates that with
 	 * IRQCHIP_MASK_ON_SUSPEND.
 	 */
-	if (irq_desc_get_chip(desc)->flags & IRQCHIP_MASK_ON_SUSPEND)
+	if (chipflags & IRQCHIP_MASK_ON_SUSPEND)
 		mask_irq(desc);
 	return true;
 }
@@ -137,7 +151,19 @@ EXPORT_SYMBOL_GPL(suspend_device_irqs);
 
 static void resume_irq(struct irq_desc *desc)
 {
-	irqd_clear(&desc->irq_data, IRQD_WAKEUP_ARMED);
+	struct irq_data *irqd = &desc->irq_data;
+
+	irqd_clear(irqd, IRQD_WAKEUP_ARMED);
+
+	if (irqd_is_enabled_on_suspend(irqd)) {
+		/*
+		 * Interrupt marked for wakeup was enabled during suspend
+		 * entry. Disable such interrupts to restore them back to
+		 * original state.
+		 */
+		__disable_irq(desc);
+		irqd_clear(irqd, IRQD_IRQ_ENABLED_ON_SUSPEND);
+	}
 
 	if (desc->istate & IRQS_SUSPENDED)
 		goto resume;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v6 4/6] pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag

[Maulik Shah]

Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag to enable/unmask the
wakeirqs during suspend entry.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 drivers/pinctrl/qcom/pinctrl-msm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 1df2322..c4bcda9 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -1242,7 +1242,8 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
 	pctrl->irq_chip.irq_set_affinity = msm_gpio_irq_set_affinity;
 	pctrl->irq_chip.irq_set_vcpu_affinity = msm_gpio_irq_set_vcpu_affinity;
 	pctrl->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND |
-				IRQCHIP_SET_TYPE_MASKED;
+				IRQCHIP_SET_TYPE_MASKED |
+				IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND;
 
 	np = of_parse_phandle(pctrl->dev->of_node, "wakeup-parent", 0);
 	if (np) {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v6 5/6] irqchip: qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag

[Maulik Shah]

Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag to enable/unmask the
wakeirqs during suspend entry.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 drivers/irqchip/qcom-pdc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index 6ae9e1f..acc0620 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -205,7 +205,8 @@ static struct irq_chip qcom_pdc_gic_chip = {
 	.irq_set_type		= qcom_pdc_gic_set_type,
 	.flags			= IRQCHIP_MASK_ON_SUSPEND |
 				  IRQCHIP_SET_TYPE_MASKED |
-				  IRQCHIP_SKIP_SET_WAKE,
+				  IRQCHIP_SKIP_SET_WAKE |
+				  IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND,
 	.irq_set_vcpu_affinity	= irq_chip_set_vcpu_affinity_parent,
 	.irq_set_affinity	= irq_chip_set_affinity_parent,
 };
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v6 6/6] irqchip: qcom-pdc: Reset PDC interrupts during init

[Maulik Shah]

Kexec can directly boot into a new kernel without going to complete
reboot. This can leave the previous kernel's configuration for PDC
interrupts as is.

Clear previous kernel's configuration during init by setting interrupts
in enable bank to zero. The IRQs specified in qcom,pdc-ranges property
are the only ones that can be used by the new kernel so clear only those
IRQs. The remaining ones may be in use by a different kernel and should
not be set by new kernel.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 drivers/irqchip/qcom-pdc.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index acc0620..bd39e9d 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -341,7 +341,8 @@ static const struct irq_domain_ops qcom_pdc_gpio_ops = {
 
 static int pdc_setup_pin_mapping(struct device_node *np)
 {
-	int ret, n;
+	int ret, n, i;
+	u32 irq_index, reg_index, val;
 
 	n = of_property_count_elems_of_size(np, "qcom,pdc-ranges", sizeof(u32));
 	if (n <= 0 || n % 3)
@@ -370,6 +371,14 @@ static int pdc_setup_pin_mapping(struct device_node *np)
 						 &pdc_region[n].cnt);
 		if (ret)
 			return ret;
+
+		for (i = 0; i < pdc_region[n].cnt; i++) {
+			reg_index = (i + pdc_region[n].pin_base) >> 5;
+			irq_index = (i + pdc_region[n].pin_base) & 0x1f;
+			val = pdc_reg_read(IRQ_ENABLE_BANK, reg_index);
+			val &= ~BIT(irq_index);
+			pdc_reg_write(IRQ_ENABLE_BANK, reg_index, val);
+		}
 	}
 
 	return 0;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH v6 3/6] genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag

[Doug Anderson]

Hi,

On Sun, Sep 27, 2020 at 9:32 PM Maulik Shah <mkshah@codeaurora.org> wrote:
>
> An interrupt that is disabled/masked but set for wakeup still needs to
> be able to wake up the system from sleep states like "suspend to RAM".
>
> This change introduces IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag. If irqchip
> have this flag set then irq PM will enable/unmask irqs that are marked
> for wakeup but are in disabled state.
>
> On resume such irqs will be restored back to disabled state.
>
> Suggested-by: Thomas Gleixner <tglx@linutronix.de>
> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
> ---
>  include/linux/irq.h  | 49 ++++++++++++++++++++++++++++++-------------------
>  kernel/irq/debugfs.c |  3 +++
>  kernel/irq/pm.c      | 34 ++++++++++++++++++++++++++++++----
>  3 files changed, 63 insertions(+), 23 deletions(-)

I will freely admit not being an expert on this code / knowing all the
subtle edge conditions, but this seems reasonable to me.

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v6 3/6] genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag

[Thomas Gleixner]

On Mon, Sep 28 2020 at 10:02, Maulik Shah wrote:
> An interrupt that is disabled/masked but set for wakeup still needs to
> be able to wake up the system from sleep states like "suspend to RAM".
>
> This change introduces IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag. If
> irqchip

s/This change introduces/Introduce/

git grep 'This patch' Documentation/process/

> have this flag set then irq PM will enable/unmask irqs that are marked
> for wakeup but are in disabled state.
>
> On resume such irqs will be restored back to disabled state.
>
> Suggested-by: Thomas Gleixner <tglx@linutronix.de>
> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>

I assume Marc will pick that lot up. So:

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

Re: [PATCH v6 0/6] irqchip: qcom: pdc: Introduce irq_set_wake call

[Stephen Boyd]

Quoting Maulik Shah (2020-09-27 21:31:58)
> Changes in v6:
> - Update commit message more descriptive in v5 patch 1
> - Symmetrically enable/disable wakeirqs during suspend/resume in v5 patch 3
> - Include Acked-by and Reviewed-by tags from v5 series
> 

Thanks. I tested this series and it is working for me.

Tested-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v6 0/6] irqchip: qcom: pdc: Introduce irq_set_wake call

[Marc Zyngier]

On Mon, 28 Sep 2020 10:01:58 +0530, Maulik Shah wrote:
> Changes in v6:
> - Update commit message more descriptive in v5 patch 1
> - Symmetrically enable/disable wakeirqs during suspend/resume in v5 patch 3
> - Include Acked-by and Reviewed-by tags from v5 series
> 
> Changes in v5:
> - Update commit subject in v4 patch 1
> - Add more details to commit message in v4 patch 2
> - Add change to enable wake irqs during suspend using new flag in irqchip
> - Use this in PDC and qcom pinctrl driver to enable wakeirqs on suspend
> - Make for loop more readable and add more details in commit in v4 patch 7
> 
> [...]

Applied to irq/irqchip-next, thanks!

[1/6] pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags
      commit: c5f72aeb659eb2f809b9531d759651514d42aa3a
[2/6] pinctrl: qcom: Use return value from irq_set_wake() call
      commit: f41aaca593377a4fe3984459fd4539481263b4cd
[3/6] genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
      commit: 90428a8eb4947f9c7c905a178f3520dc7e2ee6d2
[4/6] pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
      commit: dd87bd09822c294a3c7c4daf11f11a9f81222f80
[5/6] irqchip/qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
      commit: 299d7890792e75065b906f83fcb0ca92e5c8c072
[6/6] irqchip/qcom-pdc: Reset PDC interrupts during init
      commit: d7bc63fa20b8a3b0d0645bed1887848c65c01529

Cheers,

	M.
-- 
Without deviation from the norm, progress is not possible.