From: Doug Anderson <dianders@chromium.org>
To: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Cc: Linux Media Mailing List <linux-media@vger.kernel.org>,
linux-arm-msm <linux-arm-msm@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
Vikash Garodia <vgarodia@codeaurora.org>,
Mansur Alisha Shaik <mansur@codeaurora.org>
Subject: Re: [PATCH 1/5] venus: venc: Use pmruntime autosuspend
Date: Wed, 19 May 2021 09:51:18 -0700 [thread overview]
Message-ID: <CAD=FV=WJZ3=YMcqFLeoXnYh6=fPDzAe_4yAxehSafLGOC31ogQ@mail.gmail.com> (raw)
In-Reply-To: <20210518154509.602137-2-stanimir.varbanov@linaro.org>
Hi,
On Tue, May 18, 2021 at 8:46 AM Stanimir Varbanov
<stanimir.varbanov@linaro.org> wrote:
>
> Migrate encoder to use pm-runtime autosuspend APIs.
>
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
> ---
> drivers/media/platform/qcom/venus/venc.c | 104 +++++++++++++++++++++--
> 1 file changed, 96 insertions(+), 8 deletions(-)
Not a full review but I happened to skim by this patch and it caught
my attention...
> diff --git a/drivers/media/platform/qcom/venus/venc.c b/drivers/media/platform/qcom/venus/venc.c
> index 4a7291f934b6..a7a858f03ba3 100644
> --- a/drivers/media/platform/qcom/venus/venc.c
> +++ b/drivers/media/platform/qcom/venus/venc.c
> @@ -536,6 +536,64 @@ static const struct v4l2_ioctl_ops venc_ioctl_ops = {
> .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> };
>
> +static int venc_pm_get(struct venus_inst *inst)
> +{
> + struct venus_core *core = inst->core;
> + struct device *dev = core->dev_enc;
> + int ret;
> +
> + mutex_lock(&core->pm_lock);
> + ret = pm_runtime_get_sync(dev);
> + mutex_unlock(&core->pm_lock);
Why do you need a mutex around this?
> +
> + return ret < 0 ? ret : 0;
Odd but true: if pm_runtime_get_sync() returns an error you still need
to put. If your code below isn't going to do this then you should
handle it here?
> +}
> +
> +static int venc_pm_put(struct venus_inst *inst, bool autosuspend)
> +{
> + struct venus_core *core = inst->core;
> + struct device *dev = core->dev_enc;
> + int ret;
> +
> + mutex_lock(&core->pm_lock);
> +
> + if (autosuspend)
> + ret = pm_runtime_put_autosuspend(dev);
> + else
> + ret = pm_runtime_put_sync(dev);
> +
> + mutex_unlock(&core->pm_lock);
> +
> + return ret < 0 ? ret : 0;
> +}
> +
> +static int venc_pm_get_put(struct venus_inst *inst)
> +{
> + struct venus_core *core = inst->core;
> + struct device *dev = core->dev_enc;
> + int ret = 0;
> +
> + mutex_lock(&core->pm_lock);
> +
> + if (pm_runtime_suspended(dev)) {
> + ret = pm_runtime_get_sync(dev);
> + if (ret < 0)
> + goto error;
If pm_runtime_get_sync() returns an error you still need to put.
> +
> + ret = pm_runtime_put_autosuspend(dev);
> + }
> +
> +error:
> + mutex_unlock(&core->pm_lock);
> +
> + return ret < 0 ? ret : 0;
> +}
What is the purpose of "get_put"? It feels like using it would be racy to me.
> +
> +static void venc_pm_touch(struct venus_inst *inst)
> +{
> + pm_runtime_mark_last_busy(inst->core->dev_enc);
> +}
> +
> static int venc_set_properties(struct venus_inst *inst)
> {
> struct venc_controls *ctr = &inst->controls.enc;
> @@ -891,10 +949,18 @@ static int venc_queue_setup(struct vb2_queue *q,
> return 0;
> }
>
> + ret = venc_pm_get(inst);
> + if (ret)
> + return ret;
> +
> mutex_lock(&inst->lock);
> ret = venc_init_session(inst);
> mutex_unlock(&inst->lock);
>
> + if (ret)
> + goto put_power;
> +
> + ret = venc_pm_put(inst, false);
> if (ret)
> return ret;
>
> @@ -930,6 +996,9 @@ static int venc_queue_setup(struct vb2_queue *q,
> break;
> }
>
> + return ret;
> +put_power:
> + venc_pm_put(inst, false);
> return ret;
> }
>
> @@ -946,6 +1015,8 @@ static void venc_release_session(struct venus_inst *inst)
> {
> int ret;
>
> + venc_pm_get(inst);
> +
> mutex_lock(&inst->lock);
>
> ret = hfi_session_deinit(inst);
> @@ -957,6 +1028,8 @@ static void venc_release_session(struct venus_inst *inst)
> venus_pm_load_scale(inst);
> INIT_LIST_HEAD(&inst->registeredbufs);
> venus_pm_release_core(inst);
> +
> + venc_pm_put(inst, false);
> }
>
> static void venc_buf_cleanup(struct vb2_buffer *vb)
> @@ -1026,7 +1099,15 @@ static int venc_start_streaming(struct vb2_queue *q, unsigned int count)
> inst->sequence_cap = 0;
> inst->sequence_out = 0;
>
> + ret = venc_pm_get(inst);
> + if (ret)
> + goto error;
> +
> ret = venus_pm_acquire_core(inst);
> + if (ret)
> + goto put_power;
> +
> + ret = venc_pm_put(inst, true);
> if (ret)
> goto error;
>
> @@ -1051,6 +1132,8 @@ static int venc_start_streaming(struct vb2_queue *q, unsigned int count)
>
> return 0;
>
> +put_power:
> + venc_pm_put(inst, false);
> error:
> venus_helper_buffers_done(inst, q->type, VB2_BUF_STATE_QUEUED);
> if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> @@ -1065,6 +1148,8 @@ static void venc_vb2_buf_queue(struct vb2_buffer *vb)
> {
> struct venus_inst *inst = vb2_get_drv_priv(vb->vb2_queue);
>
> + venc_pm_get_put(inst);
> +
I don't know this code at all, but I don't understand the point of the
"get_put". Couldn't the task running this code get scheduled out for 2
seconds right after your call to venc_pm_get_put() and then it would
be just like you didn't call it?
...or maybe the device wasn't suspended but it was 10 us away from
being suspended so your "get_put" decided it didn't need to do
anything. Then you get scheduled out for 10 us and it powers off.
Maybe there's a good reason for get_put() to exist and a good reason
why it's race-free but it feels like the kind of thing that needs a
comment.
> mutex_lock(&inst->lock);
> venus_helper_vb2_buf_queue(vb);
> mutex_unlock(&inst->lock);
> @@ -1088,6 +1173,8 @@ static void venc_buf_done(struct venus_inst *inst, unsigned int buf_type,
> struct vb2_buffer *vb;
> unsigned int type;
>
> + venc_pm_touch(inst);
> +
> if (buf_type == HFI_BUFFER_INPUT)
> type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
> else
> @@ -1117,6 +1204,8 @@ static void venc_event_notify(struct venus_inst *inst, u32 event,
> {
> struct device *dev = inst->core->dev_enc;
>
> + venc_pm_touch(inst);
> +
> if (event == EVT_SESSION_ERROR) {
> inst->session_error = true;
> dev_err(dev, "enc: event session error %x\n", inst->error);
> @@ -1205,13 +1294,9 @@ static int venc_open(struct file *file)
>
> venus_helper_init_instance(inst);
>
> - ret = pm_runtime_get_sync(core->dev_enc);
> - if (ret < 0)
> - goto err_put_sync;
> -
> ret = venc_ctrl_init(inst);
> if (ret)
> - goto err_put_sync;
> + goto err_free;
>
> ret = hfi_session_create(inst, &venc_hfi_ops);
> if (ret)
> @@ -1250,8 +1335,7 @@ static int venc_open(struct file *file)
> hfi_session_destroy(inst);
> err_ctrl_deinit:
> venc_ctrl_deinit(inst);
> -err_put_sync:
> - pm_runtime_put_sync(core->dev_enc);
> +err_free:
> kfree(inst);
> return ret;
> }
> @@ -1260,6 +1344,8 @@ static int venc_close(struct file *file)
> {
> struct venus_inst *inst = to_inst(file);
>
> + venc_pm_get(inst);
> +
> v4l2_m2m_ctx_release(inst->m2m_ctx);
> v4l2_m2m_release(inst->m2m_dev);
> venc_ctrl_deinit(inst);
> @@ -1268,7 +1354,7 @@ static int venc_close(struct file *file)
> v4l2_fh_del(&inst->fh);
> v4l2_fh_exit(&inst->fh);
>
> - pm_runtime_put_sync(inst->core->dev_enc);
> + venc_pm_put(inst, false);
>
> kfree(inst);
> return 0;
> @@ -1325,6 +1411,8 @@ static int venc_probe(struct platform_device *pdev)
> core->dev_enc = dev;
>
> video_set_drvdata(vdev, core);
> + pm_runtime_set_autosuspend_delay(dev, 2000);
> + pm_runtime_use_autosuspend(dev);
> pm_runtime_enable(dev);
You have the same bug that I just made in another module! :-P
Specifically, the pm_runtime docs say:
> Drivers in ->remove() callback should undo the runtime PM changes done
> in ->probe(). Usually this means calling pm_runtime_disable(),
> pm_runtime_dont_use_autosuspend() etc.
-Doug
next prev parent reply other threads:[~2021-05-19 16:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-18 15:45 [PATCH 0/5] Venus fatal error handling Stanimir Varbanov
2021-05-18 15:45 ` [PATCH 1/5] venus: venc: Use pmruntime autosuspend Stanimir Varbanov
2021-05-19 16:51 ` Doug Anderson [this message]
2021-05-31 11:43 ` Stanimir Varbanov
2021-05-18 15:45 ` [PATCH 2/5] venus: Make sys_error flag an atomic bitops Stanimir Varbanov
2021-05-18 15:45 ` [PATCH 3/5] venus: hfi: Check for sys error on session hfi functions Stanimir Varbanov
2021-05-18 15:45 ` [PATCH 4/5] venus: helpers: Add helper to mark fatal vb2 error Stanimir Varbanov
2021-05-18 15:45 ` [PATCH 5/5] venus: Handle fatal errors during encoding and decoding Stanimir Varbanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAD=FV=WJZ3=YMcqFLeoXnYh6=fPDzAe_4yAxehSafLGOC31ogQ@mail.gmail.com' \
--to=dianders@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mansur@codeaurora.org \
--cc=stanimir.varbanov@linaro.org \
--cc=vgarodia@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).