linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Boyd <swboyd@chromium.org>
To: Kuogee Hsieh <khsieh@codeaurora.org>,
	robdclark@gmail.com, sean@poorly.run
Cc: abhinavk@codeaurora.org, aravindh@codeaurora.org,
	airlied@linux.ie, daniel@ffwll.ch, linux-arm-msm@vger.kernel.org,
	dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 3/4] drm/msm/dp: check main link status before start aux read
Date: Mon, 3 May 2021 21:42:25 -0700	[thread overview]
Message-ID: <CAE-0n50EW8evqt1NtbjEbSS71CzSAzXR21-FvCrTmvsaj+GGHQ@mail.gmail.com> (raw)
In-Reply-To: <1619048258-8717-4-git-send-email-khsieh@codeaurora.org>

Quoting Kuogee Hsieh (2021-04-21 16:37:37)
> Maybe when the cable is disconnected the DP phy should be shutdown and
> some bit in the phy could effectively "cut off" the aux channel and then
> NAKs would start coming through here in the DP controller I/O register
> space. This patch have DP aux channel read/write to return NAK immediately
> if DP controller connection status is in unplugged state.
>
> Changes in V4:
> -- split this patch as stand alone patch
>
> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/dp/dp_aux.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
> index 7c22bfe..fae3806 100644
> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> @@ -343,6 +343,11 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
>
>         mutex_lock(&aux->mutex);
>
> +       if (!dp_catalog_link_is_connected(aux->catalog)) {
> +               ret = -ETIMEDOUT;
> +               goto unlock_exit;
> +       }
> +
>         aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
>
>         /* Ignore address only message */

Can the code check for aux timeouts? So instead of blindly completing
'aux->comp' we would do the transfer, and then dp_aux_cmd_fifo_tx()
would check to see if the completion was completed from the irq
handler because of a timeout or a nack, etc. I think the code is
probably racy, given that dp_aux_isr() is called from irq context, and
aux_error_num is set from the irq context and tested in non-irq context.
This code needs a spinlock and then to check the isr bits to figure out
if it should tell the upper layers that the address was wrong, or there
was a nack or a timeout, etc.

I don't think we need to check the link to see if it is connected, just
look at the irq bits to see if the response was bad and letting higher
layers know that should quickly cut off the transactions.

  reply	other threads:[~2021-05-04  4:42 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-21 23:37 [PATCH v4 0/4] check sink_count before update is_connected status Kuogee Hsieh
2021-04-21 23:37 ` [PATCH v4 1/4] drm/msm/dp: " Kuogee Hsieh
2021-05-04  4:30   ` Stephen Boyd
2021-04-21 23:37 ` [PATCH v4 2/4] drm/msm/dp: initialize audio_comp when audio starts Kuogee Hsieh
2021-05-04  4:32   ` Stephen Boyd
2021-04-21 23:37 ` [PATCH v4 3/4] drm/msm/dp: check main link status before start aux read Kuogee Hsieh
2021-05-04  4:42   ` Stephen Boyd [this message]
2021-04-21 23:37 ` [PATCH v4 4/4] drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failed Kuogee Hsieh
2021-05-04  4:35   ` Stephen Boyd
2021-11-25  7:32     ` Dmitry Baryshkov
2021-12-01 20:48       ` khsieh
2021-05-07  0:23 ` [PATCH v4 0/4] check sink_count before update is_connected status Rob Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAE-0n50EW8evqt1NtbjEbSS71CzSAzXR21-FvCrTmvsaj+GGHQ@mail.gmail.com \
    --to=swboyd@chromium.org \
    --cc=abhinavk@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=aravindh@codeaurora.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=khsieh@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --subject='Re: [PATCH v4 3/4] drm/msm/dp: check main link status before start aux read' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).