Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Evan Green <evgreen@chromium.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
	linux-arm-msm <linux-arm-msm@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>
Subject: Re: [PATCH v3 2/5] phy: qcom-qmp: Increase PHY ready timeout
Date: Tue, 10 Dec 2019 10:47:57 -0800
Message-ID: <CAE=gft5mLSqsJzj=DtesH3G68_wSKUr8rZ5iubOerimQmZKegA@mail.gmail.com> (raw)
In-Reply-To: <20191107000917.1092409-3-bjorn.andersson@linaro.org>

On Wed, Nov 6, 2019 at 4:09 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> It's typical for the QHP PHY to take slightly above 1ms to initialize,
> so increase the timeout of the PHY ready check to 10ms - as already done
> in the downstream PCIe driver.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Tested-by: Evan Green <evgreen@chromium.org>

Should this have a Fixes tag for 14ced7e3a1ae9 ("phy: qcom-qmp:
Correct ready status, again")?

  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-07  0:09 [PATCH v3 0/5] phy: qcom-qmp: Add SDM845 QMP and QHP PHYs Bjorn Andersson
2019-11-07  0:09 ` [PATCH v3 1/5] dt-bindings: phy-qcom-qmp: Add SDM845 PCIe to binding Bjorn Andersson
2019-11-07  0:09 ` [PATCH v3 2/5] phy: qcom-qmp: Increase PHY ready timeout Bjorn Andersson
2019-12-10 18:47   ` Evan Green [this message]
2019-12-10 19:11     ` Bjorn Andersson
2019-11-07  0:09 ` [PATCH v3 3/5] phy: qcom: qmp: Use power_on/off ops for PCIe Bjorn Andersson
2019-11-07  0:09 ` [PATCH v3 4/5] phy: qcom: qmp: Add SDM845 PCIe QMP PHY support Bjorn Andersson
2019-11-07  0:09 ` [PATCH v3 5/5] phy: qcom: qmp: Add SDM845 QHP PCIe PHY Bjorn Andersson
2019-11-07 15:20 ` [PATCH v3 0/5] phy: qcom-qmp: Add SDM845 QMP and QHP PHYs Julien Massot
2019-12-27  3:24 ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAE=gft5mLSqsJzj=DtesH3G68_wSKUr8rZ5iubOerimQmZKegA@mail.gmail.com' \
    --to=evgreen@chromium.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git