Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v5 0/6] Add support for GPU DDR BW scaling
@ 2020-07-13 12:41 Akhil P Oommen
  2020-07-13 12:41 ` [PATCH v5 1/6] dt-bindings: drm/msm/gpu: Document gpu opp table Akhil P Oommen
                   ` (6 more replies)
  0 siblings, 7 replies; 21+ messages in thread
From: Akhil P Oommen @ 2020-07-13 12:41 UTC (permalink / raw)
  To: freedreno
  Cc: dri-devel, linux-arm-msm, linux-kernel, jcrouse, smasetty,
	devicetree, mka, saravanak, sibis, viresh.kumar, jonathan,
	robdclark

This series adds support for GPU DDR bandwidth scaling and is based on the
bindings from Georgi [1]. This is mostly a rebase of Sharat's patches [2] on the
tip of msm-next branch.

Changes from v4:
- Squashed a patch to another one to fix Jonathan's comment
- Add back the pm_runtime_get_if_in_use() check

Changes from v3:
- Rebased on top of Jonathan's patch which adds support for changing gpu freq
through hfi on newer targets
- As suggested by Rob, left the icc_path intact for pre-a6xx GPUs

[1] https://kernel.googlesource.com/pub/scm/linux/kernel/git/vireshk/pm/+log/opp/linux-next/
[2] https://patchwork.freedesktop.org/series/75291/

Sharat Masetty (6):
  dt-bindings: drm/msm/gpu: Document gpu opp table
  drm: msm: a6xx: send opp instead of a frequency
  drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR
  arm64: dts: qcom: SDM845: Enable GPU DDR bw scaling
  arm64: dts: qcom: sc7180: Add interconnects property for GPU
  arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp

 .../devicetree/bindings/display/msm/gpu.txt        |  28 ++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |   9 ++
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |   9 ++
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c              | 108 ++++++++++++---------
 drivers/gpu/drm/msm/adreno/a6xx_gpu.h              |   2 +-
 drivers/gpu/drm/msm/msm_gpu.c                      |   3 +-
 drivers/gpu/drm/msm/msm_gpu.h                      |   3 +-
 7 files changed, 112 insertions(+), 50 deletions(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 21+ messages in thread

* [PATCH v5 1/6] dt-bindings: drm/msm/gpu: Document gpu opp table
  2020-07-13 12:41 [PATCH v5 0/6] Add support for GPU DDR BW scaling Akhil P Oommen
@ 2020-07-13 12:41 ` Akhil P Oommen
  2020-07-13 12:41 ` [PATCH v5 2/6] drm: msm: a6xx: send opp instead of a frequency Akhil P Oommen
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 21+ messages in thread
From: Akhil P Oommen @ 2020-07-13 12:41 UTC (permalink / raw)
  To: freedreno
  Cc: dri-devel, linux-arm-msm, linux-kernel, jcrouse, smasetty,
	devicetree, mka, saravanak, sibis, viresh.kumar, jonathan,
	robdclark

From: Sharat Masetty <smasetty@codeaurora.org>

Update documentation to list the gpu opp table bindings including the
newly added "opp-peak-kBps" needed for GPU-DDR bandwidth scaling.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
---
 .../devicetree/bindings/display/msm/gpu.txt        | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index fd779cd..1af0ff1 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -112,6 +112,34 @@ Example a6xx (with GMU):
 		interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
 		interconnect-names = "gfx-mem";
 
+		gpu_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-430000000 {
+				opp-hz = /bits/ 64 <430000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				opp-peak-kBps = <5412000>;
+			};
+
+			opp-355000000 {
+				opp-hz = /bits/ 64 <355000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				opp-peak-kBps = <3072000>;
+			};
+
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				opp-peak-kBps = <3072000>;
+			};
+
+			opp-180000000 {
+				opp-hz = /bits/ 64 <180000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				opp-peak-kBps = <1804000>;
+			};
+		};
+
 		qcom,gmu = <&gmu>;
 
 		zap-shader {
-- 
2.7.4


^ permalink raw reply	[flat|nested] 21+ messages in thread

* [PATCH v5 2/6] drm: msm: a6xx: send opp instead of a frequency
  2020-07-13 12:41 [PATCH v5 0/6] Add support for GPU DDR BW scaling Akhil P Oommen
  2020-07-13 12:41 ` [PATCH v5 1/6] dt-bindings: drm/msm/gpu: Document gpu opp table Akhil P Oommen
@ 2020-07-13 12:41 ` Akhil P Oommen
  2020-07-13 12:41 ` [PATCH v5 3/6] drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR Akhil P Oommen
                   ` (4 subsequent siblings)
  6 siblings, 0 replies; 21+ messages in thread
From: Akhil P Oommen @ 2020-07-13 12:41 UTC (permalink / raw)
  To: freedreno
  Cc: dri-devel, linux-arm-msm, linux-kernel, jcrouse, smasetty,
	devicetree, mka, saravanak, sibis, viresh.kumar, jonathan,
	robdclark

From: Sharat Masetty <smasetty@codeaurora.org>

This patch changes the plumbing to send the devfreq recommended opp rather
than the frequency. Also consolidate and rearrange the code in a6xx to set
the GPU frequency and the icc vote in preparation for the upcoming
changes for GPU->DDR scaling votes.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
---
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 89 +++++++++++++++++++----------------
 drivers/gpu/drm/msm/adreno/a6xx_gpu.h |  2 +-
 drivers/gpu/drm/msm/msm_gpu.c         |  3 +-
 drivers/gpu/drm/msm/msm_gpu.h         |  3 +-
 4 files changed, 52 insertions(+), 45 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index 21e77d6..856db46 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -103,17 +103,45 @@ bool a6xx_gmu_gx_is_on(struct a6xx_gmu *gmu)
 		A6XX_GMU_SPTPRAC_PWR_CLK_STATUS_GX_HM_CLK_OFF));
 }
 
-static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
+void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp)
 {
-	struct a6xx_gpu *a6xx_gpu = container_of(gmu, struct a6xx_gpu, gmu);
-	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
-	struct msm_gpu *gpu = &adreno_gpu->base;
-	int ret;
+	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
+	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
+	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
+	u32 perf_index;
+	unsigned long gpu_freq;
+	int ret = 0;
+
+	gpu_freq = dev_pm_opp_get_freq(opp);
+
+	if (gpu_freq == gmu->freq)
+		return;
+
+	for (perf_index = 0; perf_index < gmu->nr_gpu_freqs - 1; perf_index++)
+		if (gpu_freq == gmu->gpu_freqs[perf_index])
+			break;
+
+	gmu->current_perf_index = perf_index;
+	gmu->freq = gmu->gpu_freqs[perf_index];
+
+	/*
+	 * This can get called from devfreq while the hardware is idle. Don't
+	 * bring up the power if it isn't already active
+	 */
+	if (pm_runtime_get_if_in_use(gmu->dev) == 0)
+		return;
+
+	if (!gmu->legacy) {
+		a6xx_hfi_set_freq(gmu, perf_index);
+		icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
+		pm_runtime_put(gmu->dev);
+		return;
+	}
 
 	gmu_write(gmu, REG_A6XX_GMU_DCVS_ACK_OPTION, 0);
 
 	gmu_write(gmu, REG_A6XX_GMU_DCVS_PERF_SETTING,
-		((3 & 0xf) << 28) | index);
+			((3 & 0xf) << 28) | perf_index);
 
 	/*
 	 * Send an invalid index as a vote for the bus bandwidth and let the
@@ -134,37 +162,6 @@ static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
 	 * for now leave it at max so that the performance is nominal.
 	 */
 	icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
-}
-
-void a6xx_gmu_set_freq(struct msm_gpu *gpu, unsigned long freq)
-{
-	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
-	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
-	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
-	u32 perf_index = 0;
-
-	if (freq == gmu->freq)
-		return;
-
-	for (perf_index = 0; perf_index < gmu->nr_gpu_freqs - 1; perf_index++)
-		if (freq == gmu->gpu_freqs[perf_index])
-			break;
-
-	gmu->current_perf_index = perf_index;
-	gmu->freq = gmu->gpu_freqs[perf_index];
-
-	/*
-	 * This can get called from devfreq while the hardware is idle. Don't
-	 * bring up the power if it isn't already active
-	 */
-	if (pm_runtime_get_if_in_use(gmu->dev) == 0)
-		return;
-
-	if (gmu->legacy)
-		__a6xx_gmu_set_freq(gmu, perf_index);
-	else
-		a6xx_hfi_set_freq(gmu, perf_index);
-
 	pm_runtime_put(gmu->dev);
 }
 
@@ -839,6 +836,19 @@ static void a6xx_gmu_force_off(struct a6xx_gmu *gmu)
 	a6xx_gmu_rpmh_off(gmu);
 }
 
+static void a6xx_gmu_set_initial_freq(struct msm_gpu *gpu, struct a6xx_gmu *gmu)
+{
+	struct dev_pm_opp *gpu_opp;
+	unsigned long gpu_freq = gmu->gpu_freqs[gmu->current_perf_index];
+
+	gpu_opp = dev_pm_opp_find_freq_exact(&gpu->pdev->dev, gpu_freq, true);
+	if (IS_ERR_OR_NULL(gpu_opp))
+		return;
+
+	a6xx_gmu_set_freq(gpu, gpu_opp);
+	dev_pm_opp_put(gpu_opp);
+}
+
 int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 {
 	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
@@ -898,10 +908,7 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 	enable_irq(gmu->hfi_irq);
 
 	/* Set the GPU to the current freq */
-	if (gmu->legacy)
-		__a6xx_gmu_set_freq(gmu, gmu->current_perf_index);
-	else
-		a6xx_hfi_set_freq(gmu, gmu->current_perf_index);
+	a6xx_gmu_set_initial_freq(gpu, gmu);
 
 	/*
 	 * "enable" the GX power domain which won't actually do anything but it
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
index 7239b8b..03ba60d 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
@@ -63,7 +63,7 @@ void a6xx_gmu_clear_oob(struct a6xx_gmu *gmu, enum a6xx_gmu_oob_state state);
 int a6xx_gmu_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node);
 void a6xx_gmu_remove(struct a6xx_gpu *a6xx_gpu);
 
-void a6xx_gmu_set_freq(struct msm_gpu *gpu, unsigned long freq);
+void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp);
 unsigned long a6xx_gmu_get_freq(struct msm_gpu *gpu);
 
 void a6xx_show(struct msm_gpu *gpu, struct msm_gpu_state *state,
diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c
index a22d306..82eb727 100644
--- a/drivers/gpu/drm/msm/msm_gpu.c
+++ b/drivers/gpu/drm/msm/msm_gpu.c
@@ -13,7 +13,6 @@
 
 #include <generated/utsrelease.h>
 #include <linux/string_helpers.h>
-#include <linux/pm_opp.h>
 #include <linux/devfreq.h>
 #include <linux/devcoredump.h>
 #include <linux/sched/task.h>
@@ -34,7 +33,7 @@ static int msm_devfreq_target(struct device *dev, unsigned long *freq,
 		return PTR_ERR(opp);
 
 	if (gpu->funcs->gpu_set_freq)
-		gpu->funcs->gpu_set_freq(gpu, (u64)*freq);
+		gpu->funcs->gpu_set_freq(gpu, opp);
 	else
 		clk_set_rate(gpu->core_clk, *freq);
 
diff --git a/drivers/gpu/drm/msm/msm_gpu.h b/drivers/gpu/drm/msm/msm_gpu.h
index 429cb40..0db117a 100644
--- a/drivers/gpu/drm/msm/msm_gpu.h
+++ b/drivers/gpu/drm/msm/msm_gpu.h
@@ -9,6 +9,7 @@
 
 #include <linux/clk.h>
 #include <linux/interconnect.h>
+#include <linux/pm_opp.h>
 #include <linux/regulator/consumer.h>
 
 #include "msm_drv.h"
@@ -61,7 +62,7 @@ struct msm_gpu_funcs {
 	struct msm_gpu_state *(*gpu_state_get)(struct msm_gpu *gpu);
 	int (*gpu_state_put)(struct msm_gpu_state *state);
 	unsigned long (*gpu_get_freq)(struct msm_gpu *gpu);
-	void (*gpu_set_freq)(struct msm_gpu *gpu, unsigned long freq);
+	void (*gpu_set_freq)(struct msm_gpu *gpu, struct dev_pm_opp *opp);
 	struct msm_gem_address_space *(*create_address_space)
 		(struct msm_gpu *gpu, struct platform_device *pdev);
 };
-- 
2.7.4


^ permalink raw reply	[flat|nested] 21+ messages in thread

* [PATCH v5 3/6] drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR
  2020-07-13 12:41 [PATCH v5 0/6] Add support for GPU DDR BW scaling Akhil P Oommen
  2020-07-13 12:41 ` [PATCH v5 1/6] dt-bindings: drm/msm/gpu: Document gpu opp table Akhil P Oommen
  2020-07-13 12:41 ` [PATCH v5 2/6] drm: msm: a6xx: send opp instead of a frequency Akhil P Oommen
@ 2020-07-13 12:41 ` Akhil P Oommen
  2020-07-13 12:41 ` [PATCH v5 4/6] arm64: dts: qcom: SDM845: Enable GPU DDR bw scaling Akhil P Oommen
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 21+ messages in thread
From: Akhil P Oommen @ 2020-07-13 12:41 UTC (permalink / raw)
  To: freedreno
  Cc: dri-devel, linux-arm-msm, linux-kernel, jcrouse, smasetty,
	devicetree, mka, saravanak, sibis, viresh.kumar, jonathan,
	robdclark

From: Sharat Masetty <smasetty@codeaurora.org>

This patches replaces the previously used static DDR vote and uses
dev_pm_opp_set_bw() to scale GPU->DDR bandwidth along with scaling
GPU frequency. Also since the icc path voting is handled completely
in the opp driver, remove the icc_path handle and its usage in the
drm driver.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
---
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index 856db46..a6f43ff 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -133,7 +133,7 @@ void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp)
 
 	if (!gmu->legacy) {
 		a6xx_hfi_set_freq(gmu, perf_index);
-		icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
+		dev_pm_opp_set_bw(&gpu->pdev->dev, opp);
 		pm_runtime_put(gmu->dev);
 		return;
 	}
@@ -157,11 +157,7 @@ void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp)
 	if (ret)
 		dev_err(gmu->dev, "GMU set GPU frequency error: %d\n", ret);
 
-	/*
-	 * Eventually we will want to scale the path vote with the frequency but
-	 * for now leave it at max so that the performance is nominal.
-	 */
-	icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
+	dev_pm_opp_set_bw(&gpu->pdev->dev, opp);
 	pm_runtime_put(gmu->dev);
 }
 
@@ -849,6 +845,19 @@ static void a6xx_gmu_set_initial_freq(struct msm_gpu *gpu, struct a6xx_gmu *gmu)
 	dev_pm_opp_put(gpu_opp);
 }
 
+static void a6xx_gmu_set_initial_bw(struct msm_gpu *gpu, struct a6xx_gmu *gmu)
+{
+	struct dev_pm_opp *gpu_opp;
+	unsigned long gpu_freq = gmu->gpu_freqs[gmu->current_perf_index];
+
+	gpu_opp = dev_pm_opp_find_freq_exact(&gpu->pdev->dev, gpu_freq, true);
+	if (IS_ERR_OR_NULL(gpu_opp))
+		return;
+
+	dev_pm_opp_set_bw(&gpu->pdev->dev, gpu_opp);
+	dev_pm_opp_put(gpu_opp);
+}
+
 int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 {
 	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
@@ -873,7 +882,7 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 	}
 
 	/* Set the bus quota to a reasonable value for boot */
-	icc_set_bw(gpu->icc_path, 0, MBps_to_icc(3072));
+	a6xx_gmu_set_initial_bw(gpu, gmu);
 
 	/* Enable the GMU interrupt */
 	gmu_write(gmu, REG_A6XX_GMU_AO_HOST_INTERRUPT_CLR, ~0);
@@ -1049,7 +1058,7 @@ int a6xx_gmu_stop(struct a6xx_gpu *a6xx_gpu)
 		a6xx_gmu_shutdown(gmu);
 
 	/* Remove the bus vote */
-	icc_set_bw(gpu->icc_path, 0, 0);
+	dev_pm_opp_set_bw(&gpu->pdev->dev, NULL);
 
 	/*
 	 * Make sure the GX domain is off before turning off the GMU (CX)
-- 
2.7.4


^ permalink raw reply	[flat|nested] 21+ messages in thread

* [PATCH v5 4/6] arm64: dts: qcom: SDM845: Enable GPU DDR bw scaling
  2020-07-13 12:41 [PATCH v5 0/6] Add support for GPU DDR BW scaling Akhil P Oommen
                   ` (2 preceding siblings ...)
  2020-07-13 12:41 ` [PATCH v5 3/6] drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR Akhil P Oommen
@ 2020-07-13 12:41 ` Akhil P Oommen
  2020-07-13 12:41 ` [PATCH v5 5/6] arm64: dts: qcom: sc7180: Add interconnects property for GPU Akhil P Oommen
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 21+ messages in thread
From: Akhil P Oommen @ 2020-07-13 12:41 UTC (permalink / raw)
  To: freedreno
  Cc: dri-devel, linux-arm-msm, linux-kernel, jcrouse, smasetty,
	devicetree, mka, saravanak, sibis, viresh.kumar, jonathan,
	robdclark

From: Sharat Masetty <smasetty@codeaurora.org>

This patch adds the interconnects property for the gpu node and the
opp-peak-kBps property to the opps of the gpu opp table. This should
help enable DDR bandwidth scaling dynamically and proportionally to the
GPU frequency.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 8eb5a31..5e9561a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3515,42 +3515,51 @@
 
 			qcom,gmu = <&gmu>;
 
+			interconnects = <&mem_noc MASTER_GFX3D &mem_noc SLAVE_EBI1>;
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
 				opp-710000000 {
 					opp-hz = /bits/ 64 <710000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-675000000 {
 					opp-hz = /bits/ 64 <675000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-596000000 {
 					opp-hz = /bits/ 64 <596000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <6220000>;
 				};
 
 				opp-520000000 {
 					opp-hz = /bits/ 64 <520000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <6220000>;
 				};
 
 				opp-414000000 {
 					opp-hz = /bits/ 64 <414000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <4068000>;
 				};
 
 				opp-342000000 {
 					opp-hz = /bits/ 64 <342000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <2724000>;
 				};
 
 				opp-257000000 {
 					opp-hz = /bits/ 64 <257000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <1648000>;
 				};
 			};
 		};
-- 
2.7.4


^ permalink raw reply	[flat|nested] 21+ messages in thread

* [PATCH v5 5/6] arm64: dts: qcom: sc7180: Add interconnects property for GPU
  2020-07-13 12:41 [PATCH v5 0/6] Add support for GPU DDR BW scaling Akhil P Oommen
                   ` (3 preceding siblings ...)
  2020-07-13 12:41 ` [PATCH v5 4/6] arm64: dts: qcom: SDM845: Enable GPU DDR bw scaling Akhil P Oommen
@ 2020-07-13 12:41 ` Akhil P Oommen
  2020-07-15 18:27   ` Rob Clark
  2020-07-13 12:41 ` [PATCH v5 6/6] arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp Akhil P Oommen
  2020-07-15 15:36 ` [PATCH v5 0/6] Add support for GPU DDR BW scaling Rob Clark
  6 siblings, 1 reply; 21+ messages in thread
From: Akhil P Oommen @ 2020-07-13 12:41 UTC (permalink / raw)
  To: freedreno
  Cc: dri-devel, linux-arm-msm, linux-kernel, jcrouse, smasetty,
	devicetree, mka, saravanak, sibis, viresh.kumar, jonathan,
	robdclark

From: Sharat Masetty <smasetty@codeaurora.org>

This patch adds the interconnects property to the GPU node. This enables
the GPU->DDR path bandwidth voting.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 31b9217..a567297 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1470,6 +1470,8 @@
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 
+			interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>;
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-- 
2.7.4


^ permalink raw reply	[flat|nested] 21+ messages in thread

* [PATCH v5 6/6] arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp
  2020-07-13 12:41 [PATCH v5 0/6] Add support for GPU DDR BW scaling Akhil P Oommen
                   ` (4 preceding siblings ...)
  2020-07-13 12:41 ` [PATCH v5 5/6] arm64: dts: qcom: sc7180: Add interconnects property for GPU Akhil P Oommen
@ 2020-07-13 12:41 ` Akhil P Oommen
  2020-07-15 15:36 ` [PATCH v5 0/6] Add support for GPU DDR BW scaling Rob Clark
  6 siblings, 0 replies; 21+ messages in thread
From: Akhil P Oommen @ 2020-07-13 12:41 UTC (permalink / raw)
  To: freedreno
  Cc: dri-devel, linux-arm-msm, linux-kernel, jcrouse, smasetty,
	devicetree, mka, saravanak, sibis, viresh.kumar, jonathan,
	robdclark

From: Sharat Masetty <smasetty@codeaurora.org>

Add opp-peak-kBps bindings to the GPU opp table, listing the peak
GPU -> DDR bandwidth requirement for each opp level. This will be
used to scale the DDR bandwidth along with the GPU frequency dynamically.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index a567297..8567e9e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1478,36 +1478,43 @@
 				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <8532000>;
 				};
 
 				opp-650000000 {
 					opp-hz = /bits/ 64 <650000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-565000000 {
 					opp-hz = /bits/ 64 <565000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <5412000>;
 				};
 
 				opp-430000000 {
 					opp-hz = /bits/ 64 <430000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <5412000>;
 				};
 
 				opp-355000000 {
 					opp-hz = /bits/ 64 <355000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <3072000>;
 				};
 
 				opp-267000000 {
 					opp-hz = /bits/ 64 <267000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <3072000>;
 				};
 
 				opp-180000000 {
 					opp-hz = /bits/ 64 <180000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					opp-peak-kBps = <1804000>;
 				};
 			};
 		};
-- 
2.7.4


^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-13 12:41 [PATCH v5 0/6] Add support for GPU DDR BW scaling Akhil P Oommen
                   ` (5 preceding siblings ...)
  2020-07-13 12:41 ` [PATCH v5 6/6] arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp Akhil P Oommen
@ 2020-07-15 15:36 ` Rob Clark
  2020-07-20 10:01   ` Viresh Kumar
  6 siblings, 1 reply; 21+ messages in thread
From: Rob Clark @ 2020-07-15 15:36 UTC (permalink / raw)
  To: Akhil P Oommen
  Cc: freedreno, dri-devel, linux-arm-msm, Linux Kernel Mailing List,
	Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Viresh Kumar,
	Jonathan, Bjorn Andersson

On Mon, Jul 13, 2020 at 5:41 AM Akhil P Oommen <akhilpo@codeaurora.org> wrote:
>
> This series adds support for GPU DDR bandwidth scaling and is based on the
> bindings from Georgi [1]. This is mostly a rebase of Sharat's patches [2] on the
> tip of msm-next branch.
>
> Changes from v4:
> - Squashed a patch to another one to fix Jonathan's comment
> - Add back the pm_runtime_get_if_in_use() check
>
> Changes from v3:
> - Rebased on top of Jonathan's patch which adds support for changing gpu freq
> through hfi on newer targets
> - As suggested by Rob, left the icc_path intact for pre-a6xx GPUs
>
> [1] https://kernel.googlesource.com/pub/scm/linux/kernel/git/vireshk/pm/+log/opp/linux-next/
> [2] https://patchwork.freedesktop.org/series/75291/
>
> Sharat Masetty (6):
>   dt-bindings: drm/msm/gpu: Document gpu opp table
>   drm: msm: a6xx: send opp instead of a frequency
>   drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR
>   arm64: dts: qcom: SDM845: Enable GPU DDR bw scaling
>   arm64: dts: qcom: sc7180: Add interconnects property for GPU
>   arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp

I can take the first two into msm-next, the 3rd will need to wait
until dev_pm_opp_set_bw() lands

Bjorn, I assume you take the last three?

BR,
-R

>
>  .../devicetree/bindings/display/msm/gpu.txt        |  28 ++++++
>  arch/arm64/boot/dts/qcom/sc7180.dtsi               |   9 ++
>  arch/arm64/boot/dts/qcom/sdm845.dtsi               |   9 ++
>  drivers/gpu/drm/msm/adreno/a6xx_gmu.c              | 108 ++++++++++++---------
>  drivers/gpu/drm/msm/adreno/a6xx_gpu.h              |   2 +-
>  drivers/gpu/drm/msm/msm_gpu.c                      |   3 +-
>  drivers/gpu/drm/msm/msm_gpu.h                      |   3 +-
>  7 files changed, 112 insertions(+), 50 deletions(-)
>
> --
> 2.7.4
>

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 5/6] arm64: dts: qcom: sc7180: Add interconnects property for GPU
  2020-07-13 12:41 ` [PATCH v5 5/6] arm64: dts: qcom: sc7180: Add interconnects property for GPU Akhil P Oommen
@ 2020-07-15 18:27   ` Rob Clark
  0 siblings, 0 replies; 21+ messages in thread
From: Rob Clark @ 2020-07-15 18:27 UTC (permalink / raw)
  To: Akhil P Oommen
  Cc: freedreno, dri-devel, linux-arm-msm, Linux Kernel Mailing List,
	Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Viresh Kumar,
	Jonathan

On Mon, Jul 13, 2020 at 5:42 AM Akhil P Oommen <akhilpo@codeaurora.org> wrote:
>
> From: Sharat Masetty <smasetty@codeaurora.org>
>
> This patch adds the interconnects property to the GPU node. This enables
> the GPU->DDR path bandwidth voting.
>
> Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 31b9217..a567297 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1470,6 +1470,8 @@
>                         operating-points-v2 = <&gpu_opp_table>;
>                         qcom,gmu = <&gmu>;
>
> +                       interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>;

I suppose this and the 845 dts patch should have:

   interconnect-names = "gfx-mem";

(OTOH not having it was a good way to notice a bug in the driver
handling the legacy case without having 'interconnect-names')

BR,
-R


> +
>                         gpu_opp_table: opp-table {
>                                 compatible = "operating-points-v2";
>
> --
> 2.7.4
>

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-15 15:36 ` [PATCH v5 0/6] Add support for GPU DDR BW scaling Rob Clark
@ 2020-07-20 10:01   ` Viresh Kumar
  2020-07-20 15:03     ` Rob Clark
  0 siblings, 1 reply; 21+ messages in thread
From: Viresh Kumar @ 2020-07-20 10:01 UTC (permalink / raw)
  To: Rob Clark
  Cc: Akhil P Oommen, freedreno, dri-devel, linux-arm-msm,
	Linux Kernel Mailing List, Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Jonathan,
	Bjorn Andersson

On 15-07-20, 08:36, Rob Clark wrote:
> I can take the first two into msm-next, the 3rd will need to wait
> until dev_pm_opp_set_bw() lands

You can base that on a8351c12c6c7 in linux-next, I will make sure not to rebase
it anymore.

-- 
viresh

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-20 10:01   ` Viresh Kumar
@ 2020-07-20 15:03     ` Rob Clark
  2020-07-21  3:24       ` Viresh Kumar
  0 siblings, 1 reply; 21+ messages in thread
From: Rob Clark @ 2020-07-20 15:03 UTC (permalink / raw)
  To: Viresh Kumar
  Cc: Akhil P Oommen, freedreno, dri-devel, linux-arm-msm,
	Linux Kernel Mailing List, Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Jonathan,
	Bjorn Andersson

On Mon, Jul 20, 2020 at 3:01 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 15-07-20, 08:36, Rob Clark wrote:
> > I can take the first two into msm-next, the 3rd will need to wait
> > until dev_pm_opp_set_bw() lands
>
> You can base that on a8351c12c6c7 in linux-next, I will make sure not to rebase
> it anymore.
>

I can't really base on something newer than drm-next

BR,
-R

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-20 15:03     ` Rob Clark
@ 2020-07-21  3:24       ` Viresh Kumar
  2020-07-21 14:28         ` Rob Clark
  0 siblings, 1 reply; 21+ messages in thread
From: Viresh Kumar @ 2020-07-21  3:24 UTC (permalink / raw)
  To: Rob Clark
  Cc: Akhil P Oommen, freedreno, dri-devel, linux-arm-msm,
	Linux Kernel Mailing List, Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Jonathan,
	Bjorn Andersson

On 20-07-20, 08:03, Rob Clark wrote:
> On Mon, Jul 20, 2020 at 3:01 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > On 15-07-20, 08:36, Rob Clark wrote:
> > > I can take the first two into msm-next, the 3rd will need to wait
> > > until dev_pm_opp_set_bw() lands
> >
> > You can base that on a8351c12c6c7 in linux-next, I will make sure not to rebase
> > it anymore.

This was 5.8-rc1 + 2 patches for OPP. That's all.

> >
> 
> I can't really base on something newer than drm-next

But you need the OPP dependency, isn't it ?

-- 
viresh

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-21  3:24       ` Viresh Kumar
@ 2020-07-21 14:28         ` Rob Clark
  2020-07-22  5:30           ` Viresh Kumar
  0 siblings, 1 reply; 21+ messages in thread
From: Rob Clark @ 2020-07-21 14:28 UTC (permalink / raw)
  To: Viresh Kumar
  Cc: Akhil P Oommen, freedreno, dri-devel, linux-arm-msm,
	Linux Kernel Mailing List, Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Jonathan,
	Bjorn Andersson, Dave Airlie

On Mon, Jul 20, 2020 at 8:24 PM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 20-07-20, 08:03, Rob Clark wrote:
> > On Mon, Jul 20, 2020 at 3:01 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > >
> > > On 15-07-20, 08:36, Rob Clark wrote:
> > > > I can take the first two into msm-next, the 3rd will need to wait
> > > > until dev_pm_opp_set_bw() lands
> > >
> > > You can base that on a8351c12c6c7 in linux-next, I will make sure not to rebase
> > > it anymore.
>
> This was 5.8-rc1 + 2 patches for OPP. That's all.
>
> > >
> >
> > I can't really base on something newer than drm-next
>
> But you need the OPP dependency, isn't it ?

With your ack, I can add the patch the dev_pm_opp_set_bw patch to my
tree and merge it via msm-next -> drm-next -> linus

Otherwise I can send a second later pull req that adds the final patch
after has rebased to 5.9-rc1 (by which point the opp next tree will
have presumably been merged

BR,
-R

>
> --
> viresh

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-21 14:28         ` Rob Clark
@ 2020-07-22  5:30           ` Viresh Kumar
  2020-07-22 15:47             ` Rob Clark
  2020-07-30  5:10             ` Viresh Kumar
  0 siblings, 2 replies; 21+ messages in thread
From: Viresh Kumar @ 2020-07-22  5:30 UTC (permalink / raw)
  To: Rob Clark
  Cc: Akhil P Oommen, freedreno, dri-devel, linux-arm-msm,
	Linux Kernel Mailing List, Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Jonathan,
	Bjorn Andersson, Dave Airlie

On 21-07-20, 07:28, Rob Clark wrote:
> With your ack, I can add the patch the dev_pm_opp_set_bw patch to my
> tree and merge it via msm-next -> drm-next -> linus

I wanted to send it via my tree, but its okay. Pick this patch from
linux-next and add my Ack, I will drop it after that.

a8351c12c6c7 OPP: Add and export helper to set bandwidth

> Otherwise I can send a second later pull req that adds the final patch
> after has rebased to 5.9-rc1 (by which point the opp next tree will
> have presumably been merged

The PM stuff gets pushed fairly early and so I was asking you to
rebase just on my tree, so you could have sent the pull request right
after the PM tree landed there instead of waiting for rc1.

But its fine now.

-- 
viresh

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-22  5:30           ` Viresh Kumar
@ 2020-07-22 15:47             ` Rob Clark
  2020-07-22 23:01               ` Daniel Vetter
  2020-07-30  5:10             ` Viresh Kumar
  1 sibling, 1 reply; 21+ messages in thread
From: Rob Clark @ 2020-07-22 15:47 UTC (permalink / raw)
  To: Viresh Kumar
  Cc: Akhil P Oommen, freedreno, dri-devel, linux-arm-msm,
	Linux Kernel Mailing List, Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Jonathan,
	Bjorn Andersson, Dave Airlie

On Tue, Jul 21, 2020 at 10:30 PM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 21-07-20, 07:28, Rob Clark wrote:
> > With your ack, I can add the patch the dev_pm_opp_set_bw patch to my
> > tree and merge it via msm-next -> drm-next -> linus
>
> I wanted to send it via my tree, but its okay. Pick this patch from
> linux-next and add my Ack, I will drop it after that.
>
> a8351c12c6c7 OPP: Add and export helper to set bandwidth

Thanks, I'll do that

>
> > Otherwise I can send a second later pull req that adds the final patch
> > after has rebased to 5.9-rc1 (by which point the opp next tree will
> > have presumably been merged
>
> The PM stuff gets pushed fairly early and so I was asking you to
> rebase just on my tree, so you could have sent the pull request right
> after the PM tree landed there instead of waiting for rc1.

I guess I should have explained that my tree gets pulled first into
drm-next, which then gets pulled by Linus.

BR,
-R

> But its fine now.
>
> --
> viresh

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-22 15:47             ` Rob Clark
@ 2020-07-22 23:01               ` Daniel Vetter
  0 siblings, 0 replies; 21+ messages in thread
From: Daniel Vetter @ 2020-07-22 23:01 UTC (permalink / raw)
  To: Rob Clark
  Cc: Viresh Kumar,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Jonathan, saravanak, linux-arm-msm, Sharat Masetty,
	Akhil P Oommen, Linux Kernel Mailing List, Matthias Kaehlcke,
	dri-devel, Bjorn Andersson, freedreno, Sibi Sankar

On Wed, Jul 22, 2020 at 5:47 PM Rob Clark <robdclark@gmail.com> wrote:
>
> On Tue, Jul 21, 2020 at 10:30 PM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > On 21-07-20, 07:28, Rob Clark wrote:
> > > With your ack, I can add the patch the dev_pm_opp_set_bw patch to my
> > > tree and merge it via msm-next -> drm-next -> linus
> >
> > I wanted to send it via my tree, but its okay. Pick this patch from
> > linux-next and add my Ack, I will drop it after that.
> >
> > a8351c12c6c7 OPP: Add and export helper to set bandwidth
>
> Thanks, I'll do that
>
> >
> > > Otherwise I can send a second later pull req that adds the final patch
> > > after has rebased to 5.9-rc1 (by which point the opp next tree will
> > > have presumably been merged
> >
> > The PM stuff gets pushed fairly early and so I was asking you to
> > rebase just on my tree, so you could have sent the pull request right
> > after the PM tree landed there instead of waiting for rc1.
>
> I guess I should have explained that my tree gets pulled first into
> drm-next, which then gets pulled by Linus.

Yeah either topic tree or acks for merging in the other branch. No
rebasing in the middle of the merge window, that's rather uncool.
-Daniel

>
> BR,
> -R
>
> > But its fine now.
> >
> > --
> > viresh
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel



-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-22  5:30           ` Viresh Kumar
  2020-07-22 15:47             ` Rob Clark
@ 2020-07-30  5:10             ` Viresh Kumar
  2020-07-30 15:27               ` Rob Clark
  1 sibling, 1 reply; 21+ messages in thread
From: Viresh Kumar @ 2020-07-30  5:10 UTC (permalink / raw)
  To: Rob Clark
  Cc: Akhil P Oommen, freedreno, dri-devel, linux-arm-msm,
	Linux Kernel Mailing List, Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Jonathan,
	Bjorn Andersson, Dave Airlie

On 22-07-20, 11:00, Viresh Kumar wrote:
> On 21-07-20, 07:28, Rob Clark wrote:
> > With your ack, I can add the patch the dev_pm_opp_set_bw patch to my
> > tree and merge it via msm-next -> drm-next -> linus
> 
> I wanted to send it via my tree, but its okay. Pick this patch from
> linux-next and add my Ack, I will drop it after that.
> 
> a8351c12c6c7 OPP: Add and export helper to set bandwidth

Oops, sorry for the trouble but this needs to go via my tree only :(

I maintain two different branches, one for OPP and another one for
cpufreq. There was no dependency within the OPP branch and so I
dropped it that day and asked you to take it.

But when I tried to send a pull request today I realised that one of
the qcom patches in the cpufreq branch is dependent on it and I need
to keep this patch in my tree.

-- 
viresh

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-30  5:10             ` Viresh Kumar
@ 2020-07-30 15:27               ` Rob Clark
  2020-07-30 15:37                 ` Viresh Kumar
  0 siblings, 1 reply; 21+ messages in thread
From: Rob Clark @ 2020-07-30 15:27 UTC (permalink / raw)
  To: Viresh Kumar
  Cc: Akhil P Oommen, freedreno, dri-devel, linux-arm-msm,
	Linux Kernel Mailing List, Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Jonathan,
	Bjorn Andersson, Dave Airlie

On Wed, Jul 29, 2020 at 10:10 PM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 22-07-20, 11:00, Viresh Kumar wrote:
> > On 21-07-20, 07:28, Rob Clark wrote:
> > > With your ack, I can add the patch the dev_pm_opp_set_bw patch to my
> > > tree and merge it via msm-next -> drm-next -> linus
> >
> > I wanted to send it via my tree, but its okay. Pick this patch from
> > linux-next and add my Ack, I will drop it after that.
> >
> > a8351c12c6c7 OPP: Add and export helper to set bandwidth
>
> Oops, sorry for the trouble but this needs to go via my tree only :(
>
> I maintain two different branches, one for OPP and another one for
> cpufreq. There was no dependency within the OPP branch and so I
> dropped it that day and asked you to take it.
>
> But when I tried to send a pull request today I realised that one of
> the qcom patches in the cpufreq branch is dependent on it and I need
> to keep this patch in my tree.

Hmm, I've already sent my pull request to Dave, dropping the patch
would require force-push and sending a new PR.  Which I can do if Dave
prefers.  OTOH I guess it isn't the end of the world if the patch is
merged via two different trees.

BR,
-R

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-30 15:27               ` Rob Clark
@ 2020-07-30 15:37                 ` Viresh Kumar
  2020-07-30 15:46                   ` Rob Clark
  2020-07-30 21:26                   ` Rob Clark
  0 siblings, 2 replies; 21+ messages in thread
From: Viresh Kumar @ 2020-07-30 15:37 UTC (permalink / raw)
  To: Rob Clark
  Cc: Akhil P Oommen, freedreno, dri-devel, linux-arm-msm,
	Linux Kernel Mailing List, Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Jonathan,
	Bjorn Andersson, Dave Airlie

On 30-07-20, 08:27, Rob Clark wrote:
> Hmm, I've already sent my pull request to Dave, dropping the patch
> would require force-push and sending a new PR.  Which I can do if Dave
> prefers.  OTOH I guess it isn't the end of the world if the patch is
> merged via two different trees.

I don't think a patch can go via two trees, as that would have two sha
keys for the same code.

Though it is fine for a patch to go via two different trees if we make
sure the same sha key is used for both.

Will it be possible for you to provide a branch/tag of your branch
that I can base stuff of ?

-- 
viresh

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-30 15:37                 ` Viresh Kumar
@ 2020-07-30 15:46                   ` Rob Clark
  2020-07-30 21:26                   ` Rob Clark
  1 sibling, 0 replies; 21+ messages in thread
From: Rob Clark @ 2020-07-30 15:46 UTC (permalink / raw)
  To: Viresh Kumar
  Cc: Akhil P Oommen, freedreno, dri-devel, linux-arm-msm,
	Linux Kernel Mailing List, Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Jonathan,
	Bjorn Andersson, Dave Airlie

On Thu, Jul 30, 2020 at 8:37 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 30-07-20, 08:27, Rob Clark wrote:
> > Hmm, I've already sent my pull request to Dave, dropping the patch
> > would require force-push and sending a new PR.  Which I can do if Dave
> > prefers.  OTOH I guess it isn't the end of the world if the patch is
> > merged via two different trees.
>
> I don't think a patch can go via two trees, as that would have two sha
> keys for the same code.

it looks weird in the history, but other than that I think it is
fine.. at least I see it happen somewhat regularly with fixes in drm

> Though it is fine for a patch to go via two different trees if we make
> sure the same sha key is used for both.
>
> Will it be possible for you to provide a branch/tag of your branch
> that I can base stuff of ?

You could use https://gitlab.freedesktop.org/drm/msm/-/commits/msm-next/
(or the tag drm-msm-next-2020-07-29), which already has the OPP patch.
I've been trying to avoid force-pushing that because downstream trees
are already pulling from that.

BR,
-R

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: [PATCH v5 0/6] Add support for GPU DDR BW scaling
  2020-07-30 15:37                 ` Viresh Kumar
  2020-07-30 15:46                   ` Rob Clark
@ 2020-07-30 21:26                   ` Rob Clark
  1 sibling, 0 replies; 21+ messages in thread
From: Rob Clark @ 2020-07-30 21:26 UTC (permalink / raw)
  To: Viresh Kumar, Dave Airlie
  Cc: Akhil P Oommen, freedreno, dri-devel, linux-arm-msm,
	Linux Kernel Mailing List, Jordan Crouse, Sharat Masetty,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Matthias Kaehlcke, saravanak, Sibi Sankar, Jonathan,
	Bjorn Andersson

On Thu, Jul 30, 2020 at 8:37 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 30-07-20, 08:27, Rob Clark wrote:
> > Hmm, I've already sent my pull request to Dave, dropping the patch
> > would require force-push and sending a new PR.  Which I can do if Dave
> > prefers.  OTOH I guess it isn't the end of the world if the patch is
> > merged via two different trees.
>
> I don't think a patch can go via two trees, as that would have two sha
> keys for the same code.
>
> Though it is fine for a patch to go via two different trees if we make
> sure the same sha key is used for both.
>
> Will it be possible for you to provide a branch/tag of your branch
> that I can base stuff of ?
>

Ok, I sent a v2 pull req that dropped the OPP patch.  Both are tagged
so Dave can use either version, so I guess you two can coordinate this

BR,
-R

^ permalink raw reply	[flat|nested] 21+ messages in thread

end of thread, back to index

Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-13 12:41 [PATCH v5 0/6] Add support for GPU DDR BW scaling Akhil P Oommen
2020-07-13 12:41 ` [PATCH v5 1/6] dt-bindings: drm/msm/gpu: Document gpu opp table Akhil P Oommen
2020-07-13 12:41 ` [PATCH v5 2/6] drm: msm: a6xx: send opp instead of a frequency Akhil P Oommen
2020-07-13 12:41 ` [PATCH v5 3/6] drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR Akhil P Oommen
2020-07-13 12:41 ` [PATCH v5 4/6] arm64: dts: qcom: SDM845: Enable GPU DDR bw scaling Akhil P Oommen
2020-07-13 12:41 ` [PATCH v5 5/6] arm64: dts: qcom: sc7180: Add interconnects property for GPU Akhil P Oommen
2020-07-15 18:27   ` Rob Clark
2020-07-13 12:41 ` [PATCH v5 6/6] arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp Akhil P Oommen
2020-07-15 15:36 ` [PATCH v5 0/6] Add support for GPU DDR BW scaling Rob Clark
2020-07-20 10:01   ` Viresh Kumar
2020-07-20 15:03     ` Rob Clark
2020-07-21  3:24       ` Viresh Kumar
2020-07-21 14:28         ` Rob Clark
2020-07-22  5:30           ` Viresh Kumar
2020-07-22 15:47             ` Rob Clark
2020-07-22 23:01               ` Daniel Vetter
2020-07-30  5:10             ` Viresh Kumar
2020-07-30 15:27               ` Rob Clark
2020-07-30 15:37                 ` Viresh Kumar
2020-07-30 15:46                   ` Rob Clark
2020-07-30 21:26                   ` Rob Clark

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git