From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 86D42C4332B for ; Mon, 23 Mar 2020 20:46:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 1884E20719 for ; Mon, 23 Mar 2020 20:46:17 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="fy5B7M4W" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726007AbgCWUqQ (ORCPT ); Mon, 23 Mar 2020 16:46:16 -0400 Received: from mail-ua1-f66.google.com ([209.85.222.66]:32942 "EHLO mail-ua1-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725914AbgCWUqQ (ORCPT ); Mon, 23 Mar 2020 16:46:16 -0400 Received: by mail-ua1-f66.google.com with SMTP id v24so14362uak.0 for ; Mon, 23 Mar 2020 13:46:15 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=avSGiptGQF9hE9IPVYyfDgpvYQHJFA6GQoG6Pm5p1nI=; b=fy5B7M4WVPNB6wx97QHx57yM2C5O4ieAW8exwVd8nqBhwKISmdgk8JH6b0GUZjMfyH NZvHcEoZMI+QWIcrxGu5a8Tf+NcQ9F5nch7b5P/RO1NixEhCNit0wmIpl5NhYBFBxWsd S/qRQie6TmA8j4GO9pSrEBO9ik+xRRON89Cpoh1pdHNeopOjhNeXZdjF7NMop1RQO+fe SekXj0t5AoJyCIDZg0DYsKENuky/9tHxcNpbb8HdIqZBSJZxrfuA1V8CugjhGw810hBc 8CTQ0QcIuViBq1rFyYkt3l0ZnbROGEhcdLyOXk7p6wUqO6U3b+m0I8/omfH7UmZ4kiUp nzrg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=avSGiptGQF9hE9IPVYyfDgpvYQHJFA6GQoG6Pm5p1nI=; b=h+NUDp/HwyiYXSp8ekDfMv1ChOlkNHineEWm/LAuu5lw+3vB2JK3tBSXqGTRXQoyzy rvmuvu1VrundPfLroWfSntGbkK92g7fs6Y24FXmMj6h4VMeXymnEajySsH7rHVoSV2fF M/MTp2aS5gQP7Efki968sjqqiAv2Pvv/aVnHu4V799I+8jkbBybty75mMGvjWLNU/FN1 7VI5/o4+WA00AAtV1uiAWQJHYlyzyr5obuDyPt4iRRCyfMTCZh3Ge6ieaTHFSRK88svZ lc06R3rmfT3hUHlG6iC5zNTMqb2kaVT+wS3/PIfJGEYr6zGhv3efciplSOIyIj1AQVqF mwmA== X-Gm-Message-State: ANhLgQ3lunIe0ChkfIa7/fokvoJWDUmguSmigzRZ/mhpea680ldf7ks0 uoY94QuaOZk0eJZ+rm++YxPC0+5TZFMEDzabTqg4eg== X-Google-Smtp-Source: ADFU+vvDAnEKB4ZFdPiysFslS8rnid5/tsQxnFQLzSdrHuIa9MfbBbVr4nylyNL61u3dVZsW1GLblgFDK3Lz+CvmCXY= X-Received: by 2002:ab0:5f90:: with SMTP id b16mr15354828uaj.77.1584996374341; Mon, 23 Mar 2020 13:46:14 -0700 (PDT) MIME-Version: 1.0 References: <8a0cfe9e3018f7996c1563035bee76048941beb4.1583412540.git.amit.kucheria@linaro.org> <20200311144933.GA21587@bogus> In-Reply-To: <20200311144933.GA21587@bogus> From: Amit Kucheria Date: Tue, 24 Mar 2020 02:16:03 +0530 Message-ID: Subject: Re: [PATCH v2 3/3] dt-bindings: thermal: Add yaml bindings for thermal zones To: Rob Herring Cc: LKML , linux-arm-msm , Stephen Boyd , Matthias Kaehlcke , Daniel Lezcano , Zhang Rui , Linux PM list , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" Content-Type: text/plain; charset="UTF-8" Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Hi Rob, Thanks for the review. On Wed, Mar 11, 2020 at 8:19 PM Rob Herring wrote: > > On Thu, Mar 05, 2020 at 06:26:43PM +0530, Amit Kucheria wrote: > > As part of moving the thermal bindings to YAML, split it up into 3 > > bindings: thermal sensors, cooling devices and thermal zones. > > > > The thermal-zone binding is a software abstraction to capture the > > properties of each zone - how often they should be checked, the > > temperature thresholds (trips) at which mitigation actions need to be > > taken and the level of mitigation needed at those thresholds. > > > > Signed-off-by: Amit Kucheria > > --- > > .../bindings/thermal/thermal-zones.yaml | 325 ++++++++++++++++++ > > 1 file changed, 325 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/thermal/thermal-zones.yaml > > > > diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > > new file mode 100644 > > index 0000000000000..f8f3b72bc3119 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > > @@ -0,0 +1,325 @@ > > +# SPDX-License-Identifier: (GPL-2.0) > > +# Copyright 2020 Linaro Ltd. > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/thermal/thermal-zones.yaml# > > +$schema: http://devicetree.org/meta-schemas/base.yaml# > > + > > +title: Thermal zone binding > > + > > +maintainers: > > + - Amit Kucheria > > + > > +description: | > > + Thermal management is achieved in devicetree by describing the sensor hardware > > + and the software abstraction of cooling devices and thermal zones required to > > + take appropriate action to mitigate thermal overloads. > > + > > + The following node types are used to completely describe a thermal management > > + system in devicetree: > > + - thermal-sensor: device that measures temperature, has SoC-specific bindings > > + - cooling-device: device used to dissipate heat either passively or actively > > + - thermal-zones: a container of the following node types used to describe all > > + thermal data for the platform > > + > > + This binding describes the thermal-zones. > > + > > + The polling-delay properties of a thermal-zone are bound to the maximum dT/dt > > + (temperature derivative over time) in two situations for a thermal zone: > > + 1. when passive cooling is activated (polling-delay-passive) > > + 2. when the zone just needs to be monitored (polling-delay) or when > > + active cooling is activated. > > + > > + The maximum dT/dt is highly bound to hardware power consumption and > > + dissipation capability. The delays should be chosen to account for said > > + max dT/dt, such that a device does not cross several trip boundaries > > + unexpectedly between polls. Choosing the right polling delays shall avoid > > + having the device in temperature ranges that may damage the silicon structures > > + and reduce silicon lifetime. > > + > > +properties: > > + thermal-zones: > > + type: object > > + description: > > + A /thermal-zones node is required in order to use the thermal framework to > > + manage input from the various thermal zones in the system in order to > > + mitigate thermal overload conditions. It does not represent a real device > > + in the system, but acts as a container to link thermal sensor devices, > > + platform-data regarding temperature thresholds and the mitigation actions > > + to take when the temperature crosses those thresholds. > > + > > > + properties: > > + $nodename: > > + pattern: "^[a-zA-Z][a-zA-Z0-9,\\-]{1,12}-thermal$" > > These 3 lines should be: > > patternProperties: > "^[a-zA-Z][a-zA-Z0-9,\\-]{1,12}-thermal$": > > Though we should drop ',' as well. > > $nodename is only needed at the top level where it's kind of special. Fixed. > > + type: object > > + description: > > + Each thermal zone node contains information about how frequently it > > + must be checked, the sensor responsible for reporting temperature for > > + this zone, one sub-node containing the various trip points for this > > + zone and one sub-node containing all the zone cooling-maps. > > + > > + properties: > > + polling-delay: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 0 > > The type is unsigned, so the min is already 0. Dropped. > > + description: > > + The maximum number of milliseconds to wait between polls when > > + checking this thermal zone. Setting this to 0 disables the polling > > + timers setup by the thermal framework and assumes that the thermal > > + sensors in this zone support interrupts. > > + > > + polling-delay-passive: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 0 Dropped. > > + description: > > + The maximum number of milliseconds to wait between polls when > > + checking this thermal zone while doing passive cooling. Setting > > + this to 0 disables the polling timers setup by the thermal > > + framework and assumes that the thermal sensors in this zone > > + support interrupts. > > + > > + thermal-sensors: > > + $ref: /schemas/types.yaml#/definitions/phandle-array > > + description: > > + A list of thermal sensor phandles and sensor specifiers used to > > + monitor this thermal zone. > > + > > + trips: > > + type: object > > + description: > > + This node describes a set of points in the temperature domain at > > + which the thermal framework needs to takes action. The actions to > > + be taken are defined in another node called cooling-maps. > > + > > + patternProperties: > > + "^[a-zA-Z][a-zA-Z0-9,+\\._]{0,63}$": > > Drop ',', '+', '.', and ideally '_'. Probably need to add '-'. Dropping underscore flags a lot of DTs in dtbs_check. Do you want me to go fix them or can we live with the underscore. Is there some document I should read on why underscore isn't desirable? Fixed the rest. > > > + type: object > > + > > + properties: > > + temperature: > > + $ref: /schemas/types.yaml#/definitions/int32 > > + minimum: -273000 > > + maximum: 200000 > > + description: > > + An integer expressing the trip temperature in millicelsius. > > + > > + hysteresis: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + An unsigned integer expressing the hysteresis delta with > > + respect to the trip temperature property above, also in > > + millicelsius. > > + > > + type: > > Needs a type reference (string). Fixed. > > > + enum: > > + # active: enable active cooling e.g. fans > > + - active > > Wrong indentation. Should be 2 less. > > Also, I think this would be more readable: > > - active # enable active cooling e.g. fans Yes, fixed. > > > + # passive: enable passive cooling e.g. throttling cpu > > + - passive > > + # hot: send notification to driver if .notify > > + # callback registered > > + - hot > > + # critical: send notification to driver if .notify > > + # callback registered and trigger a shutdown > > + - critical > > + description: | > > + There are four valid trip types: active, passive, hot, > > + critical. > > + > > + The critical trip type is used to set the maximum > > + temperature threshold above which the HW becomes > > + unstable and underlying firmware might even trigger a > > + reboot. Hitting the critical threshold triggers a system > > + shutdown. > > + > > + The hot trip type can be used to send a notification to > > + the thermal driver (if a .notify callback is registered). > > + The action to be taken is left to the driver. > > + > > + The passive trip type can be used to slow down HW e.g. run > > + the CPU, GPU, bus at a lower frequency. > > + > > + The active trip type can be used to control other HW to > > + help in cooling e.g. fans can be sped up or slowed down > > + > > + required: > > + - temperature > > + - hysteresis > > + - type > > + > > + additionalProperties: false > > You need 'additionalProperties' on the child nodes too, or are there > vendor specific properties allowed? Done. No vendor-specific properties allowed here. > > + > > + cooling-maps: > > + type: object > > + description: > > + This node describes the action to be taken when a thermal zone > > + crosses one of the temperature thresholds described in the trips > > + node. The action takes the form of a mapping relation between a > > + trip and the target cooling device state. > > + > > + patternProperties: > > + "^map[0-9][-a-zA-Z0-9]*$": > > + type: object > > + > > + properties: > > + trip: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: > > + A phandle of a trip point node within this thermal zone. > > + > > + cooling-device: > > + $ref: /schemas/types.yaml#/definitions/phandle-array > > + description: > > + A list of cooling device phandles along with the minimum > > + and maximum cooling state specifiers for each cooling > > + device. Using the THERMAL_NO_LIMIT (-1UL) constant in the > > + cooling-device phandle limit specifier lets the framework > > + use the minimum and maximum cooling state for that cooling > > + device automatically. > > + > > + contribution: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 0 > > + maximum: 100 > > + description: > > + The contribution of the cooling devices at the trip > > + temperature, both referenced in this map, to this thermal > > + zone as a percentage. > > + > > + required: > > + - trip > > + - cooling-device > > + > > 'additionalProperties' for map* nodes? Done. > > + additionalProperties: false > > + > > +examples: > > + - | > > + #include > > + #include > > + > > + // Example 1: SDM845 TSENS > > + soc: soc@0 { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + /* ... */ > > + > > + tsens0: thermal-sensor@c263000 { > > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > > + reg = <0 0x0c263000 0 0x1ff>, /* TM */ > > + <0 0x0c222000 0 0x1ff>; /* SROT */ > > + #qcom,sensors = <13>; > > + interrupts = , > > + ; > > + interrupt-names = "uplow", "critical"; > > + #thermal-sensor-cells = <1>; > > + }; > > + > > + tsens1: thermal-sensor@c265000 { > > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > > + reg = <0 0x0c265000 0 0x1ff>, /* TM */ > > + <0 0x0c223000 0 0x1ff>; /* SROT */ > > + #qcom,sensors = <8>; > > + interrupts = , > > + ; > > + interrupt-names = "uplow", "critical"; > > + #thermal-sensor-cells = <1>; > > + }; > > + }; > > + > > + /* ... */ > > + > > + thermal-zones { > > + cpu0-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens0 1>; > > + > > + trips { > > + cpu0_alert0: trip-point0 { > > + temperature = <90000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + > > + cpu0_alert1: trip-point1 { > > + temperature = <95000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + > > + cpu0_crit: cpu_crit { > > + temperature = <110000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + > > + cooling-maps { > > + map0 { > > + trip = <&cpu0_alert0>; > > + cooling-device = <&CPU0 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU1 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU2 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU3 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>; > > + }; > > + > > + map1 { > > + trip = <&cpu0_alert1>; > > + cooling-device = <&CPU0 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU1 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU2 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>, > > + <&CPU3 THERMAL_NO_LIMIT > > + THERMAL_NO_LIMIT>; > > + }; > > + }; > > + }; > > + > > + /* ... */ > > + > > + cluster0-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens0 5>; > > + > > + trips { > > + cluster0_alert0: trip-point0 { > > + temperature = <90000>; > > + hysteresis = <2000>; > > + type = "hot"; > > + }; > > + cluster0_crit: cluster0_crit { > > + temperature = <110000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + /* ... */ > > + > > + gpu-thermal-top { > > This one is not going to match (which should cause an error). Good catch. Unfortunately, this isn't getting caught. Nor is the 12-char limitation before -thermal in the thermal zone name. I can't figure out why. > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens0 11>; > > + > > + trips { > > + gpu1_alert0: trip-point0 { > > + temperature = <90000>; > > + hysteresis = <2000>; > > + type = "hot"; > > + }; > > + }; > > + }; > > + }; > > +... > > -- > > 2.20.1 > >