Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Amit Pundir <amit.pundir@linaro.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	John Stultz <john.stultz@linaro.org>,
	Sumit Semwal <sumit.semwal@linaro.org>,
	linux-arm-msm <linux-arm-msm@vger.kernel.org>,
	dt <devicetree@vger.kernel.org>,
	lkml <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3] arm64: dts: qcom: Add support for Xiaomi Poco F1 (Beryllium)
Date: Tue, 4 Aug 2020 13:05:44 +0530
Message-ID: <CAMi1Hd1KCmoF7D06otBcxCBYEUW3Tdn_aYQ722=yRoEeZYmTPg@mail.gmail.com> (raw)
In-Reply-To: <20200804061652.GK61202@yoga>

On Tue, 4 Aug 2020 at 11:46, Bjorn Andersson <bjorn.andersson@linaro.org> wrote:
>
> On Sat 01 Aug 08:55 PDT 2020, Amit Pundir wrote:
>
> > Add initial dts support for Xiaomi Poco F1 (Beryllium).
> >
> > This initial support is based on upstream Dragonboard 845c
> > (sdm845) device. With this dts, Beryllium boots AOSP up to
> > ADB shell over USB-C.
> >
> > Supported functionality includes UFS, USB-C (peripheral),
> > microSD card and Vol+/Vol-/power keys. Bluetooth should work
> > too but couldn't be verified from adb command line, it is
> > verified when enabled from UI with few WIP display patches.
> >
> > Just like initial db845c support, initializing the SMMU is
> > clearing the mapping used for the splash screen framebuffer,
> > which causes the device to hang during boot and recovery
> > needs a hard power reset. This can be worked around using:
> >
> >     fastboot oem select-display-panel none
> >
> > To switch ON the display back run:
> >
> >     fastboot oem select-display-panel
> >
> > But this only works on Beryllium devices running bootloader
> > version BOOT.XF.2.0-00369-SDM845LZB-1 that shipped with
> > Android-9 based release. Newer bootloader version do not
> > support switching OFF the display panel at all. So we need
> > a few additional smmu patches (under review) from here to
> > boot to shell:
> > https://github.com/pundiramit/linux/commits/beryllium-mainline
> >
> > Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> > ---
> > v3: Added a reserved-memory region from downstream kernel to fix
> >     a boot regression with recent dma-pool changes in v5.8-rc6.
> > v2: Updated machine compatible string for seemingly inevitable
> >     future quirks.
> >
> >  arch/arm64/boot/dts/qcom/Makefile             |   1 +
> >  arch/arm64/boot/dts/qcom/sdm845-beryllium.dts | 331 ++++++++++++++++++++++++++
> >  2 files changed, 332 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/qcom/sdm845-beryllium.dts
> >
> > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > index 0f2c33d611df..3ef1b48bc0cb 100644
> > --- a/arch/arm64/boot/dts/qcom/Makefile
> > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > @@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_QCOM)     += sdm845-cheza-r1.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)      += sdm845-cheza-r2.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)      += sdm845-cheza-r3.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)      += sdm845-db845c.dtb
> > +dtb-$(CONFIG_ARCH_QCOM)      += sdm845-beryllium.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)      += sdm845-mtp.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)      += sdm850-lenovo-yoga-c630.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)      += sm8150-mtp.dtb
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts
> > new file mode 100644
> > index 000000000000..af66459712fe
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts
> > @@ -0,0 +1,331 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +
> > +/dts-v1/;
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> > +#include "sdm845.dtsi"
> > +#include "pm8998.dtsi"
> > +#include "pmi8998.dtsi"
> > +
> > +/ {
> > +     model = "Xiaomi Technologies Inc. Beryllium";
> > +     compatible = "xiaomi,beryllium", "qcom,sdm845";
> > +
> > +     /* required for bootloader to select correct board */
> > +     qcom,board-id = <69 0>;
> > +     qcom,msm-id = <321 0x20001>;
> > +
> > +     aliases {
> > +             hsuart0 = &uart6;
> > +     };
> > +
> > +     dc12v: dc12v-regulator {
>
> This is a phone, it doesn't have a 12V DC jack. So while I don't know
> the exact power grid for this device, this node shouldn't be here.

Ack. Will remove it in next version.

>
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "DC12V";
> > +             regulator-min-microvolt = <12000000>;
> > +             regulator-max-microvolt = <12000000>;
> > +             regulator-always-on;
> > +     };
> > +
> > +     gpio_keys {
>
> y/_/-/

Ack.

>
> > +             compatible = "gpio-keys";
> > +             autorepeat;
> > +
> > +             pinctrl-names = "default";
> > +             pinctrl-0 = <&vol_up_pin_a>;
> > +
> > +             vol-up {
> > +                     label = "Volume Up";
> > +                     linux,code = <KEY_VOLUMEUP>;
> > +                     gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
> > +             };
> > +     };
> > +
> > +     vbat: vbat-regulator {
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "VBAT";
> > +
> > +             vin-supply = <&dc12v>;
> > +             regulator-min-microvolt = <4200000>;
> > +             regulator-max-microvolt = <4200000>;
> > +             regulator-always-on;
> > +     };
> > +
> > +     vbat_som: vbat-som-regulator {
>
> This is specific to db845c, with its power grid split between the main
> board and the SOM. Please omit.

Ack.

>
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "VBAT_SOM";
> > +
> > +             vin-supply = <&dc12v>;
> > +             regulator-min-microvolt = <4200000>;
> > +             regulator-max-microvolt = <4200000>;
> > +             regulator-always-on;
> > +     };
> > +
> > +     vdc_3v3: vdc-3v3-regulator {
>
> This is probably not on the Poco and it's not referenced, please remove.

Ack.

>
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "VDC_3V3";
> > +             vin-supply = <&dc12v>;
> > +             regulator-min-microvolt = <3300000>;
> > +             regulator-max-microvolt = <3300000>;
> > +             regulator-always-on;
> > +     };
> > +
> > +     vdc_5v: vdc-5v-regulator {
>
> Ditto.

Ack.

>
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "VDC_5V";
> > +
> > +             vin-supply = <&dc12v>;
> > +             regulator-min-microvolt = <500000>;
> > +             regulator-max-microvolt = <500000>;
> > +             regulator-always-on;
> > +     };
> > +
> > +     vreg_s4a_1p8: vreg-s4a-1p8 {
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "vreg_s4a_1p8";
> > +
> > +             regulator-min-microvolt = <1800000>;
> > +             regulator-max-microvolt = <1800000>;
> > +             regulator-always-on;
> > +     };
> > +};
> > +
> > +&apps_rsc {
> > +     pm8998-rpmh-regulators {
> > +             compatible = "qcom,pm8998-rpmh-regulators";
> > +             qcom,pmic-id = "a";
> > +
> > +             vreg_l1a_0p875: ldo1 {
> > +                     regulator-min-microvolt = <880000>;
> > +                     regulator-max-microvolt = <880000>;
> > +                     regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > +             };
> > +
> > +             vreg_l7a_1p8: ldo7 {
> > +                     regulator-min-microvolt = <1800000>;
> > +                     regulator-max-microvolt = <1800000>;
> > +                     regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > +             };
> > +
> > +             vreg_l12a_1p8: ldo12 {
> > +                     regulator-min-microvolt = <1800000>;
> > +                     regulator-max-microvolt = <1800000>;
> > +                     regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > +             };
> > +
> > +             vreg_l13a_2p95: ldo13 {
> > +                     regulator-min-microvolt = <1800000>;
> > +                     regulator-max-microvolt = <2960000>;
> > +                     regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > +             };
> > +
> > +             vreg_l17a_1p3: ldo17 {
> > +                     regulator-min-microvolt = <1304000>;
> > +                     regulator-max-microvolt = <1304000>;
> > +                     regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > +             };
> > +
> > +             vreg_l20a_2p95: ldo20 {
> > +                     regulator-min-microvolt = <2960000>;
> > +                     regulator-max-microvolt = <2968000>;
> > +                     regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > +             };
> > +
> > +             vreg_l21a_2p95: ldo21 {
> > +                     regulator-min-microvolt = <2960000>;
> > +                     regulator-max-microvolt = <2968000>;
> > +                     regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > +             };
> > +
> > +             vreg_l24a_3p075: ldo24 {
> > +                     regulator-min-microvolt = <3088000>;
> > +                     regulator-max-microvolt = <3088000>;
> > +                     regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > +             };
> > +
> > +             vreg_l25a_3p3: ldo25 {
> > +                     regulator-min-microvolt = <3300000>;
> > +                     regulator-max-microvolt = <3312000>;
> > +                     regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > +             };
> > +
> > +             vreg_l26a_1p2: ldo26 {
> > +                     regulator-min-microvolt = <1200000>;
> > +                     regulator-max-microvolt = <1200000>;
> > +                     regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > +             };
> > +     };
> > +};
> > +
> > +&gcc {
> > +     protected-clocks = <GCC_QSPI_CORE_CLK>,
> > +                        <GCC_QSPI_CORE_CLK_SRC>,
> > +                        <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
> > +};
> > +
> > +/* Reserved memory changes from downstream */
> > +/ {
> > +     reserved-memory {
> > +             removed_region: memory@88f00000 {
>
> Do you know what these 26MB are used for? Do you think it's possible to
> give it a more appropriate label? The size happens to be the same as
> &adsp_mem from sdm845.dtsi, this is probably not a coincidence.

In downstream, this removed region is marked as removed-dma-pool
compatible, https://github.com/MiCode/Xiaomi_Kernel_OpenSource/commit/b982b6dc77ac34c184abe83dd293ac08fc607ba3,
a carved out memory region not exposed to the kernel. I honestly
didn't know what to name this region, so I kept it as it was. I can't
boot past the bootloader if I don't mark this region as reserved.

>
> That said, this overlaps at least &rmtfs_mem, &qseecom_mem and
> &camera_mem, so I would expect that you have a few warnings about this
> early in the log? Please shuffle things around to avoid this.

Sorry, I do know that it definitely overlaps with upstream &rmtfs_mem,
but I ignored that because plan was to just boot to shell with this
base dts. I was planning to submit a follow-up patch with downstream
reserved memory mappings, which do not coincide with the upstream
sdm845.dtsi mem regions you mentioned above, along with relevant
wifi/adsp/cdsp nodes. But let me take this opportunity to submit them
in the next version of this base dts.

>
> > +                     no-map;
> > +                     reg = <0 0x88f00000 0 0x1A00000>;
>
> Please lowercase the 'A'

Ack.

Regards,
Amit Pundir


>
> Regards,
> Bjorn
>
> > +             };
> > +     };
> > +};
> > +
> > +&pm8998_gpio {
> > +     vol_up_pin_a: vol-up-active {
> > +             pins = "gpio6";
> > +             function = "normal";
> > +             input-enable;
> > +             bias-pull-up;
> > +             qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
> > +     };
> > +};
> > +
> > +&pm8998_pon {
> > +     resin {
> > +             compatible = "qcom,pm8941-resin";
> > +             interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> > +             debounce = <15625>;
> > +             bias-pull-up;
> > +             linux,code = <KEY_VOLUMEDOWN>;
> > +     };
> > +};
> > +
> > +&qupv3_id_0 {
> > +     status = "okay";
> > +};
> > +
> > +&sdhc_2 {
> > +     status = "okay";
> > +
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
> > +
> > +     vmmc-supply = <&vreg_l21a_2p95>;
> > +     vqmmc-supply = <&vreg_l13a_2p95>;
> > +
> > +     bus-width = <4>;
> > +     cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
> > +};
> > +
> > +&tlmm {
> > +     gpio-reserved-ranges = <0 4>, <81 4>;
> > +
> > +     sdc2_default_state: sdc2-default {
> > +             clk {
> > +                     pins = "sdc2_clk";
> > +                     bias-disable;
> > +
> > +                     /*
> > +                      * It seems that mmc_test reports errors if drive
> > +                      * strength is not 16 on clk, cmd, and data pins.
> > +                      */
> > +                     drive-strength = <16>;
> > +             };
> > +
> > +             cmd {
> > +                     pins = "sdc2_cmd";
> > +                     bias-pull-up;
> > +                     drive-strength = <10>;
> > +             };
> > +
> > +             data {
> > +                     pins = "sdc2_data";
> > +                     bias-pull-up;
> > +                     drive-strength = <10>;
> > +             };
> > +     };
> > +
> > +     sdc2_card_det_n: sd-card-det-n {
> > +             pins = "gpio126";
> > +             function = "gpio";
> > +             bias-pull-up;
> > +     };
> > +};
> > +
> > +&uart6 {
> > +     status = "okay";
> > +
> > +     bluetooth {
> > +             compatible = "qcom,wcn3990-bt";
> > +
> > +             vddio-supply = <&vreg_s4a_1p8>;
> > +             vddxo-supply = <&vreg_l7a_1p8>;
> > +             vddrf-supply = <&vreg_l17a_1p3>;
> > +             vddch0-supply = <&vreg_l25a_3p3>;
> > +             max-speed = <3200000>;
> > +     };
> > +};
> > +
> > +&usb_1 {
> > +     status = "okay";
> > +};
> > +
> > +&usb_1_dwc3 {
> > +     dr_mode = "peripheral";
> > +};
> > +
> > +&usb_1_hsphy {
> > +     status = "okay";
> > +
> > +     vdd-supply = <&vreg_l1a_0p875>;
> > +     vdda-pll-supply = <&vreg_l12a_1p8>;
> > +     vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
> > +
> > +     qcom,imp-res-offset-value = <8>;
> > +     qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
> > +     qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
> > +     qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
> > +};
> > +
> > +&usb_1_qmpphy {
> > +     status = "okay";
> > +
> > +     vdda-phy-supply = <&vreg_l26a_1p2>;
> > +     vdda-pll-supply = <&vreg_l1a_0p875>;
> > +};
> > +
> > +&ufs_mem_hc {
> > +     status = "okay";
> > +
> > +     reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
> > +
> > +     vcc-supply = <&vreg_l20a_2p95>;
> > +     vcc-max-microamp = <800000>;
> > +};
> > +
> > +&ufs_mem_phy {
> > +     status = "okay";
> > +
> > +     vdda-phy-supply = <&vreg_l1a_0p875>;
> > +     vdda-pll-supply = <&vreg_l26a_1p2>;
> > +};
> > +
> > +/* PINCTRL - additions to nodes defined in sdm845.dtsi */
> > +
> > +&qup_uart6_default {
> > +     pinmux {
> > +             pins = "gpio45", "gpio46", "gpio47", "gpio48";
> > +             function = "qup6";
> > +     };
> > +
> > +     cts {
> > +             pins = "gpio45";
> > +             bias-disable;
> > +     };
> > +
> > +     rts-tx {
> > +             pins = "gpio46", "gpio47";
> > +             drive-strength = <2>;
> > +             bias-disable;
> > +     };
> > +
> > +     rx {
> > +             pins = "gpio48";
> > +             bias-pull-up;
> > +     };
> > +};
> > --
> > 2.7.4
> >

  reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-01 15:55 Amit Pundir
2020-08-04  6:16 ` Bjorn Andersson
2020-08-04  7:35   ` Amit Pundir [this message]
2020-08-04 19:22     ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAMi1Hd1KCmoF7D06otBcxCBYEUW3Tdn_aYQ722=yRoEeZYmTPg@mail.gmail.com' \
    --to=amit.pundir@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=john.stultz@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sumit.semwal@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git