From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Courbot Subject: Re: [PATCH v3] arm64: dts: sdm845: add video nodes Date: Fri, 25 Jan 2019 16:46:36 +0900 Message-ID: References: <1545292023-5489-1-git-send-email-mgottam@codeaurora.org> <0ee6676f-f169-1ea1-506e-16e4097d1c04@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: In-Reply-To: <0ee6676f-f169-1ea1-506e-16e4097d1c04@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Stanimir Varbanov Cc: Malathi Gottam , Andy Gross , David Brown , robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, LKML , linux-arm-msm@vger.kernel.org, Vikash Garodia List-Id: linux-arm-msm@vger.kernel.org On Thu, Jan 17, 2019 at 8:58 PM Stanimir Varbanov wrote: > > Hi Malathi, > > On 12/20/18 9:47 AM, Malathi Gottam wrote: > > This adds video nodes to sdm845 based on the examples > > in the bindings. > > > > Signed-off-by: Malathi Gottam > > --- > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 35 +++++++++++++++++++++++++++++++++++ > > 1 file changed, 35 insertions(+) > > Looks good to me: > > Reviewed-by: Stanimir Varbanov > > > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > index b72bdb0..ccd2b10 100644 > > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > @@ -87,6 +87,11 @@ > > reg = <0 0x86200000 0 0x2d00000>; > > no-map; > > }; > > + > > + venus_region: memory@95800000 { > > + reg = <0x0 0x95800000 0x0 0x500000>; > > + no-map; > > + }; > > }; > > > > cpus { > > @@ -1403,5 +1408,35 @@ > > status = "disabled"; > > }; > > }; > > + > > + video-codec@aa00000 { > > + compatible = "qcom,sdm845-venus"; > > + reg = <0x0aa00000 0xff000>; > > + interrupts = ; > > + power-domains = <&videocc VENUS_GDSC>; > > + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, > > + <&videocc VIDEO_CC_VENUS_AHB_CLK>, > > + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; > > + clock-names = "core", "iface", "bus"; > > + iommus = <&apps_smmu 0x10a0 0x8>, > > + <&apps_smmu 0x10b0 0x0>; > > + memory-region = <&venus_region>; > > + > > + video-core0 { > > + compatible = "venus-decoder"; > > + clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, > > + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; > > + clock-names = "core", "bus"; > > + power-domains = <&videocc VCODEC0_GDSC>; > > + }; > > + > > + video-core1 { > > + compatible = "venus-encoder"; > > + clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, > > + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; > > + clock-names = "core", "bus"; > > + power-domains = <&videocc VCODEC1_GDSC>; > > + }; > > + }; This patch lacks the video-firmware node, it should at the very least be added before this gets merged.