linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ulf Hansson <ulf.hansson@linaro.org>
To: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Linux PM <linux-pm@vger.kernel.org>,
	DTML <devicetree@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-arm-msm <linux-arm-msm@vger.kernel.org>,
	Stephen Boyd <swboyd@chromium.org>,
	Roja Rani Yarubandi <rojay@codeaurora.org>
Subject: Re: [PATCH v2 1/3] dt-bindings: power: Introduce 'assigned-performance-states' property
Date: Tue, 1 Jun 2021 12:33:31 +0200	[thread overview]
Message-ID: <CAPDyKFprcA3DJW4bxef88oekpB5cNCkgy73_=mr40YWjNphvOw@mail.gmail.com> (raw)
In-Reply-To: <1622095949-2014-2-git-send-email-rnayak@codeaurora.org>

On Thu, 27 May 2021 at 08:13, Rajendra Nayak <rnayak@codeaurora.org> wrote:
>
> While most devices within power-domains which support performance states,
> scale the performance state dynamically, some devices might want to
> set a static/default performance state while the device is active.
> These devices typically would also run off a fixed clock and not support
> dynamically scaling the device's performance, also known as DVFS techniques.
> Add a property 'assigned-performance-states' which client devices can
> use to set this default performance state on their power-domains.
>
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>

I don't have a strong opinion about using "default-performance-state"
or "assigned-performance-state". Although, perhaps people can relate
to the existing "assigned-clock-rates" DT binding?
In any case, please add:

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

> ---
>  .../devicetree/bindings/power/power-domain.yaml    | 50 ++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
> index aed51e9..88cebf2 100644
> --- a/Documentation/devicetree/bindings/power/power-domain.yaml
> +++ b/Documentation/devicetree/bindings/power/power-domain.yaml
> @@ -66,6 +66,19 @@ properties:
>        by the given provider should be subdomains of the domain specified
>        by this binding.
>
> +  assigned-performance-states:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description:
> +       Some devices might need to configure their power domains in a default
> +       performance state while the device is active. These devices typically
> +       would also run off a fixed clock and not support dynamically scaling the
> +       device's performance, also known as DVFS techniques. The list of performance
> +       state values should correspond to the list of power domains specified as part
> +       of the power-domains property. Each cell corresponds to one power-domain.
> +       A value of 0 can be used for power-domains with no performance state
> +       requirement. In case the power-domains have OPP tables associated, the values
> +       here would typically match with one of the entries in the OPP table.
> +
>  required:
>    - "#power-domain-cells"
>
> @@ -131,3 +144,40 @@ examples:
>              min-residency-us = <7000>;
>          };
>      };
> +
> +  - |
> +    parent4: power-controller@12340000 {
> +        compatible = "foo,power-controller";
> +        reg = <0x12340000 0x1000>;
> +        #power-domain-cells = <0>;
> +    };
> +
> +    parent5: power-controller@43210000 {
> +        compatible = "foo,power-controller";
> +        reg = <0x43210000 0x1000>;
> +        #power-domain-cells = <0>;
> +        operating-points-v2 = <&power_opp_table>;
> +
> +        power_opp_table: opp-table {
> +            compatible = "operating-points-v2";
> +
> +            power_opp_low: opp1 {
> +                opp-level = <16>;
> +            };
> +
> +            rpmpd_opp_ret: opp2 {
> +                opp-level = <64>;
> +            };
> +
> +            rpmpd_opp_svs: opp3 {
> +                opp-level = <256>;
> +            };
> +        };
> +    };
> +
> +    child4: consumer@12341000 {
> +        compatible = "foo,consumer";
> +        reg = <0x12341000 0x1000>;
> +        power-domains = <&parent4>, <&parent5>;
> +        assigned-performance-states = <0>, <256>;
> +    };
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>

  parent reply	other threads:[~2021-06-01 10:34 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-27  6:12 [PATCH v2 0/3] PM / Domains: Add support for assigned-performance-states Rajendra Nayak
2021-05-27  6:12 ` [PATCH v2 1/3] dt-bindings: power: Introduce 'assigned-performance-states' property Rajendra Nayak
2021-05-27  6:16   ` Viresh Kumar
2021-05-27  6:21     ` Rajendra Nayak
2021-05-27 14:23   ` Rob Herring
2021-05-27 14:26     ` Rob Herring
2021-06-01 10:33   ` Ulf Hansson [this message]
2021-06-01 11:12   ` Stephan Gerhold
2021-06-01 11:44     ` Viresh Kumar
2021-06-02 10:45       ` Ulf Hansson
2021-06-02 10:54         ` Viresh Kumar
2021-06-02 12:50           ` Ulf Hansson
2021-06-15 15:05   ` Ulf Hansson
2021-06-18  6:01     ` Rajendra Nayak
2021-05-27  6:12 ` [PATCH v2 2/3] PM / Domains: Add support for 'assigned-performance-states' Rajendra Nayak
2021-05-27  6:12 ` [PATCH v2 3/3] arm64: dts: sc7180: Add assigned-performance-states for i2c Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAPDyKFprcA3DJW4bxef88oekpB5cNCkgy73_=mr40YWjNphvOw@mail.gmail.com' \
    --to=ulf.hansson@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rnayak@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=rojay@codeaurora.org \
    --cc=swboyd@chromium.org \
    --cc=viresh.kumar@linaro.org \
    --subject='Re: [PATCH v2 1/3] dt-bindings: power: Introduce '\''assigned-performance-states'\'' property' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).