linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Carl Yin(殷张成)" <carl.yin@quectel.com>
To: Jeffrey Hugo <jhugo@codeaurora.org>,
	Hemant Kumar <hemantk@codeaurora.org>,
	"manivannan.sadhasivam@linaro.org"
	<manivannan.sadhasivam@linaro.org>,
	"sfr@canb.auug.org.au" <sfr@canb.auug.org.au>
Cc: "linux-arm-msm@vger.kernel.org" <linux-arm-msm@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"Naveen Kumar" <naveen.kumar@quectel.com>
Subject: 答复: 答复: [PATCH] bus: mhi: core: Add support MHI EE FP for download firmware
Date: Thu, 29 Oct 2020 01:12:49 +0000	[thread overview]
Message-ID: <HK2PR06MB3507DA5F5DA6969C772E679886140@HK2PR06MB3507.apcprd06.prod.outlook.com> (raw)
In-Reply-To: <45c9497e-4186-8c5f-431b-ad5eb003f505@codeaurora.org>

Hi Jeffery:

On Wednesday, October 28, 2020 10:24 PM, jhugo wrote:
> On 10/27/2020 7:39 PM, Carl Yin(殷张成) wrote:
> > Hi Hemant and Jeffery:
> >
> > On Wednesday, October 28, 2020 7:02 AM, hemantk wrote:
> >> Hi Jeff,
> >>
> >> On 10/27/20 8:11 AM, Jeffrey Hugo wrote:
> >>> On 10/27/2020 3:43 AM, carl.yin@quectel.com wrote:
> >>>> From: "carl.yin" <carl.yin@quectel.com>
> >>>>
> >>>> MHI wwan modems support download firmware to nand or emmc by
> >>>> firehose protocol, process as next:
> >>>> 1. wwan modem normal bootup and enter EE AMSS, create mhi DIAG chan
> >>>> device 2. send EDL cmd via DIAG chan, then modem enter EE EDL 3.
> >>>> boot.c download 'firehose/prog_firehose_sdx55.mbn' via BHI
> >>>> interface 4. modem enter EE FP, and create mhi EDL chan device 5.
> >>>> user space tool download FW to modem via EDL chan by firehose
> >>>> protocol
> >>>>
> >>>> Signed-off-by: carl.yin <carl.yin@quectel.com>
> >>>> ---
> >>>>    drivers/bus/mhi/core/boot.c     |  4 +++-
> >>>>    drivers/bus/mhi/core/init.c     |  2 ++
> >>>>    drivers/bus/mhi/core/internal.h |  1 +
> >>>>    drivers/bus/mhi/core/main.c     |  3 +++
> >>>>    drivers/bus/mhi/core/pm.c       | 16 +++++++++++++++-
> >>>>    include/linux/mhi.h             |  4 +++-
> >>>>    6 files changed, 27 insertions(+), 3 deletions(-)
> >>>>
> >>>> diff --git a/drivers/bus/mhi/core/boot.c
> >>>> b/drivers/bus/mhi/core/boot.c index 24422f5..ab39ad6 100644
> >>>> --- a/drivers/bus/mhi/core/boot.c
> >>>> +++ b/drivers/bus/mhi/core/boot.c
> >>>> @@ -460,8 +460,10 @@ void mhi_fw_load_handler(struct mhi_controller
> >>>> *mhi_cntrl)
> >>>>            return;
> >>>>        }
> >>>> -    if (mhi_cntrl->ee == MHI_EE_EDL)
> >>>> +    if (mhi_cntrl->ee == MHI_EE_EDL) {
> >>>> +        mhi_ready_state_transition(mhi_cntrl);
> >>>>            return;
> >>>> +    }
> >>>>        write_lock_irq(&mhi_cntrl->pm_lock);
> >>>>        mhi_cntrl->dev_state = MHI_STATE_RESET; diff --git
> >>>> a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c index
> >>>> ac4aa5c..9c2c2f3 100644
> >>>> --- a/drivers/bus/mhi/core/init.c
> >>>> +++ b/drivers/bus/mhi/core/init.c
> >>>> @@ -26,6 +26,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = {
> >>>>        [MHI_EE_WFW] = "WFW",
> >>>>        [MHI_EE_PTHRU] = "PASS THRU",
> >>>>        [MHI_EE_EDL] = "EDL",
> >>>> +    [MHI_EE_FP] = "FP",
> >>>>        [MHI_EE_DISABLE_TRANSITION] = "DISABLE",
> >>>>        [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED",
> >>>>    };
> >>>> @@ -35,6 +36,7 @@ const char * const
> >>>> dev_state_tran_str[DEV_ST_TRANSITION_MAX] = {
> >>>>        [DEV_ST_TRANSITION_READY] = "READY",
> >>>>        [DEV_ST_TRANSITION_SBL] = "SBL",
> >>>>        [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE",
> >>>> +    [DEV_ST_TRANSITION_FP] = "FP",
> >>>>        [DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR",
> >>>>        [DEV_ST_TRANSITION_DISABLE] = "DISABLE",
> >>>>    };
> >>>> diff --git a/drivers/bus/mhi/core/internal.h
> >>>> b/drivers/bus/mhi/core/internal.h index 4abf0cf..6ae897a 100644
> >>>> --- a/drivers/bus/mhi/core/internal.h
> >>>> +++ b/drivers/bus/mhi/core/internal.h
> >>>> @@ -386,6 +386,7 @@ enum dev_st_transition {
> >>>>        DEV_ST_TRANSITION_READY,
> >>>>        DEV_ST_TRANSITION_SBL,
> >>>>        DEV_ST_TRANSITION_MISSION_MODE,
> >>>> +    DEV_ST_TRANSITION_FP,
> >>>>        DEV_ST_TRANSITION_SYS_ERR,
> >>>>        DEV_ST_TRANSITION_DISABLE,
> >>>>        DEV_ST_TRANSITION_MAX,
> >>>> diff --git a/drivers/bus/mhi/core/main.c
> >>>> b/drivers/bus/mhi/core/main.c index 3950792..e307b58 100644
> >>>> --- a/drivers/bus/mhi/core/main.c
> >>>> +++ b/drivers/bus/mhi/core/main.c
> >>>> @@ -782,6 +782,9 @@ int mhi_process_ctrl_ev_ring(struct
> >>>> mhi_controller *mhi_cntrl,
> >>>>                case MHI_EE_SBL:
> >>>>                    st = DEV_ST_TRANSITION_SBL;
> >>>>                    break;
> >>>> +            case MHI_EE_FP:
> >>>> +                st = DEV_ST_TRANSITION_FP;
> >>>> +                break;
> >>>>                case MHI_EE_WFW:
> >>>>                case MHI_EE_AMSS:
> >>>>                    st = DEV_ST_TRANSITION_MISSION_MODE;
> diff
> >> --git
> >>>> a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c index
> >>>> 3de7b16..3c95a5d 100644
> >>>> --- a/drivers/bus/mhi/core/pm.c
> >>>> +++ b/drivers/bus/mhi/core/pm.c
> >>>> @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct
> >>>> mhi_controller *mhi_cntrl,
> >>>>        }
> >>>>        if (cur_state == MHI_PM_SYS_ERR_PROCESS) {
> >>>> -        mhi_ready_state_transition(mhi_cntrl);
> >>>> +        if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL
> >>>> +            && mhi_get_mhi_state(mhi_cntrl) ==
> MHI_STATE_RESET) {
> >>>> +            write_lock_irq(&mhi_cntrl->pm_lock);
> >>>> +            cur_state = mhi_tryset_pm_state(mhi_cntrl,
> >> MHI_PM_POR);
> >>>> +            write_unlock_irq(&mhi_cntrl->pm_lock);
> >>>> +            mhi_queue_state_transition(mhi_cntrl,
> >>>> DEV_ST_TRANSITION_PBL);
> >>>> +        } else {
> >>>> +            mhi_ready_state_transition(mhi_cntrl);
> >>>> +        }
> >>>>        } else {
> >>>>            /* Move to disable state */
> >>>>            write_lock_irq(&mhi_cntrl->pm_lock);
> >>>> @@ -658,6 +666,12 @@ void mhi_pm_st_worker(struct work_struct
> >>>> *work)
> >>>>            case DEV_ST_TRANSITION_MISSION_MODE:
> >>>>                mhi_pm_mission_mode_transition(mhi_cntrl);
> >>>>                break;
> >>>> +        case DEV_ST_TRANSITION_FP:
> >>>> +            write_lock_irq(&mhi_cntrl->pm_lock);
> >>>> +            mhi_cntrl->ee = MHI_EE_FP;
> >>>> +            write_unlock_irq(&mhi_cntrl->pm_lock);
> >>>> +            mhi_create_devices(mhi_cntrl);
> >>>> +            break;
> >>>>            case DEV_ST_TRANSITION_READY:
> >>>>                mhi_ready_state_transition(mhi_cntrl);
> >>>>                break;
> >>>> diff --git a/include/linux/mhi.h b/include/linux/mhi.h index
> >>>> 6e1122c..4620af8 100644
> >>>> --- a/include/linux/mhi.h
> >>>> +++ b/include/linux/mhi.h
> >>>> @@ -120,6 +120,7 @@ struct mhi_link_info {
> >>>>     * @MHI_EE_WFW: WLAN firmware mode
> >>>>     * @MHI_EE_PTHRU: Passthrough
> >>>>     * @MHI_EE_EDL: Embedded downloader
> >>>> + * @MHI_EE_FP, Flash Programmer Environment
> >>>>     */
> >>>>    enum mhi_ee_type {
> >>>>        MHI_EE_PBL,
> >>>> @@ -129,7 +130,8 @@ enum mhi_ee_type {
> >>>>        MHI_EE_WFW,
> >>>>        MHI_EE_PTHRU,
> >>>>        MHI_EE_EDL,
> >>>> -    MHI_EE_MAX_SUPPORTED = MHI_EE_EDL,
> >>>> +    MHI_EE_FP,
> >>>> +    MHI_EE_MAX_SUPPORTED = MHI_EE_FP,
> >>>>        MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi
> >>>> spec */
> >>>>        MHI_EE_NOT_SUPPORTED,
> >>>>        MHI_EE_MAX,
> >>>>
> >>>
> >>> This gets a NACK from me.  I don't see the FP_EE that this patch
> >>> introduces defined in the spec.  Where did it come from?
> >>>
> >> There is indeed a FP EE, BHI spec will be updated with this EE next month.
> >>
> >> Basically, once device goes to EDL, flash programmer image is
> >> downloaded using BHI protocol (same as we download SBL image using
> >> BHI from PBL in current use case). Once it is downloaded intvec sends
> >> EE change event for FP. Also event is generated for the same which is
> >> used to create EDL channels (34, 35) which is used by flash programmer to
> flash image for AMSS.
> >>
> > [carl.yin] I am refer to QUALLCOMM's windows MHI driver.
> > And the patch work well on my SDX24&SDX55 modems.
> > I can use it to upgrade my modems.
> 
> Linaro has an opensource utility that implements firehose -
> https://github.com/andersson/qdl
> 
> Did you test with that?
[carl.yin] I am test with https://github.com/carlyin/mhi_for_quectel_modem/blob/main/tools/firehose_protocol.c
Firehose protocol is same for mhi and usb device, 
and different on download edl image.
For usb device, use space tool download edl image by sahara protocol,
For mhi device, mhi driver download edl image by BHI interface,
For wwan device, it is better do it in user space.
> 
> --
> Jeffrey Hugo
> Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux
> Foundation Collaborative Project.

  reply	other threads:[~2020-10-29  1:13 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-27  9:43 [PATCH] bus: mhi: core: Add support MHI EE FP for download firmware carl.yin
2020-10-27 15:11 ` Jeffrey Hugo
2020-10-27 23:01   ` Hemant Kumar
2020-10-28  1:39     ` 答复: " Carl Yin(殷张成)
2020-10-28 14:24       ` Jeffrey Hugo
2020-10-29  1:12         ` Carl Yin(殷张成) [this message]
2020-10-29 14:20           ` 答复: " Jeffrey Hugo
2020-10-28 14:19     ` Jeffrey Hugo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=HK2PR06MB3507DA5F5DA6969C772E679886140@HK2PR06MB3507.apcprd06.prod.outlook.com \
    --to=carl.yin@quectel.com \
    --cc=hemantk@codeaurora.org \
    --cc=jhugo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=naveen.kumar@quectel.com \
    --cc=sfr@canb.auug.org.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).