[PATCH v2 0/6] Add binding and dts for Qualcomm SM8350 SoC

[PATCH v2 0/6] Add binding and dts for Qualcomm SM8350 SoC

[Vinod Koul]

Hi,

This series adds the compatible for SM8350 SoC, boardi, cpu, scm and aoss
compatible.  Then the base DTS for SM8350 SoC which contains clock (gcc,
rpmh), pinctrl, uart, reserved memory and cpu nodes. The board file for MTP
enables uart and adds the rpmh regulators

Changes in v2:
 - Add ack by Rob recieved for v1
 - Document cpu and scm compatible and use soc specific scm compatible
 - Fix errors pointed by Rob and make dtbs_check as well as W=1 compilation

Vinod Koul (6):
  dt-bindings: arm: qcom: Document SM8350 SoC and boards
  soc: qcom: aoss: Add SM8350 compatible
  dt-bindings: arm: cpus: Add kryo685 compatible
  dt-bindings: firmware: scm: Add SM8250 and SM8350 compatible
  arm64: dts: qcom: Add basic devicetree support for SM8350 SoC
  arm64: dts: qcom: Add basic devicetree support for SM8350-MTP board

 .../devicetree/bindings/arm/cpus.yaml         |   1 +
 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../devicetree/bindings/firmware/qcom,scm.txt |   2 +
 .../bindings/soc/qcom/qcom,aoss-qmp.txt       |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/sm8350-mtp.dts       | 250 +++++++++
 arch/arm64/boot/dts/qcom/sm8350.dtsi          | 499 ++++++++++++++++++
 drivers/soc/qcom/qcom_aoss.c                  |   1 +
 8 files changed, 761 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8350-mtp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm8350.dtsi

-- 
2.26.2

[PATCH v2 1/6] dt-bindings: arm: qcom: Document SM8350 SoC and boards

[Vinod Koul]

Document the SM8350 SoC binding and also the boards using it.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index c97d4a580f47..8fe7e473bfdf 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -41,6 +41,7 @@ description: |
         sdm660
         sdm845
         sm8250
+        sm8350
 
   The 'board' element must be one of the following strings:
 
@@ -178,6 +179,11 @@ properties:
               - qcom,sm8250-mtp
           - const: qcom,sm8250
 
+      - items:
+          - enum:
+              - qcom,sm8350-mtp
+          - const: qcom,sm8350
+
 additionalProperties: true
 
 ...
-- 
2.26.2

[PATCH v2 2/6] soc: qcom: aoss: Add SM8350 compatible

[Vinod Koul]

Add SM8350 compatible to the qcom_aoss binding and driver.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt | 1 +
 drivers/soc/qcom/qcom_aoss.c                                 | 1 +
 2 files changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
index 953add19e937..19c059e44681 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
@@ -20,6 +20,7 @@ power-domains.
 		    "qcom,sdm845-aoss-qmp"
 		    "qcom,sm8150-aoss-qmp"
 		    "qcom,sm8250-aoss-qmp"
+		    "qcom,sm8350-aoss-qmp"
 
 - reg:
 	Usage: required
diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index b5840d624bc6..53acb9423bd6 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -600,6 +600,7 @@ static const struct of_device_id qmp_dt_match[] = {
 	{ .compatible = "qcom,sdm845-aoss-qmp", },
 	{ .compatible = "qcom,sm8150-aoss-qmp", },
 	{ .compatible = "qcom,sm8250-aoss-qmp", },
+	{ .compatible = "qcom,sm8350-aoss-qmp", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, qmp_dt_match);
-- 
2.26.2

[PATCH v2 3/6] dt-bindings: arm: cpus: Add kryo685 compatible

[Vinod Koul]

Kryo685 is found in SM8350, so add it to the list of cpu compatibles

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 14cd727d3c4b..3a0b4c54cd8e 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -169,6 +169,7 @@ properties:
       - qcom,kryo385
       - qcom,kryo468
       - qcom,kryo485
+      - qcom,kryo685
       - qcom,scorpion
 
   enable-method:
-- 
2.26.2

[PATCH v2 4/6] dt-bindings: firmware: scm: Add SM8250 and SM8350 compatible

[Vinod Koul]

Add compatible for SM8150 and SM8350 SoCs.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 Documentation/devicetree/bindings/firmware/qcom,scm.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index 78456437df5f..a884955f861e 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -22,6 +22,8 @@ Required properties:
  * "qcom,scm-sc7180"
  * "qcom,scm-sdm845"
  * "qcom,scm-sm8150"
+ * "qcom,scm-sm8250"
+ * "qcom,scm-sm8350"
  and:
  * "qcom,scm"
 - clocks: Specifies clocks needed by the SCM interface, if any:
-- 
2.26.2

[PATCH v2 5/6] arm64: dts: qcom: Add basic devicetree support for SM8350 SoC

[Vinod Koul]

Add basic devicetree support for Qualcomm Technologies, Inc SM8350 SoC.
This adds gcc, pinctrl, reserved memory, uart, cpu nodes for this SoC.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 499 +++++++++++++++++++++++++++
 1 file changed, 499 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8350.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
new file mode 100644
index 000000000000..29af0b931690
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Limaited
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo685";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+				      compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo685";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo685";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo685";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo685";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			L2_400: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo685";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			L2_500: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo685";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			L2_600: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo685";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			L2_700: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8350", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@80700000 {
+			no-map;
+			reg = <0x0 0x80700000 0x0 0x160000>;
+		};
+
+		cmd_db: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		reserved_xbl_uefi_log: memory@80880000 {
+			reg = <0x0 0x80880000 0x0 0x14000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+
+		cpucp_fw_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0x4600000>;
+			no-map;
+		};
+
+		pil_camera_mem: mmeory@85200000 {
+			reg = <0x0 0x85200000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_cvp_mem: memory@85c00000 {
+			reg = <0x0 0x85c00000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2100000>;
+			no-map;
+		};
+
+		pil_slpi_mem: memory@88200000 {
+			reg = <0x0 0x88200000 0x0 0x1500000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@89700000 {
+			reg = <0x0 0x89700000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@8b500000 {
+			reg = <0x0 0x8b500000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@8b510000 {
+			reg = <0x0 0x8b510000 0x0 0xa000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@8b51a000 {
+			reg = <0x0 0x8b51a000 0x0 0x2000>;
+			no-map;
+		};
+
+		pil_spss_mem: memory@8b600000 {
+			reg = <0x0 0x8b600000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_modem_mem: memory@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0x10000000>;
+			no-map;
+		};
+
+		hyp_reserved_mem: memory@d0000000 {
+			reg = <0x0 0xd0000000 0x0 0x800000>;
+			no-map;
+		};
+
+		pil_trustedvm_mem: memory@d0800000 {
+			reg = <0x0 0xd0800000 0x0 0x76f7000>;
+			no-map;
+		};
+
+		qrtr_shbuf: memory@d7ef7000 {
+			reg = <0x0 0xd7ef7000 0x0 0x9000>;
+			no-map;
+		};
+
+		chan0_shbuf: memory@d7f00000 {
+			reg = <0x0 0xd7f00000 0x0 0x80000>;
+			no-map;
+		};
+
+		chan1_shbuf: memory@d7f80000 {
+			reg = <0x0 0xd7f80000 0x0 0x80000>;
+			no-map;
+		};
+
+		removed_mem: memory@d8800000 {
+			reg = <0x0 0xd8800000 0x0 0x6800000>;
+			no-map;
+		};
+	};
+
+	smem: qcom,smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8350";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sm8350-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qupv3_id_1: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc 121>,
+				 <&gcc 122>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart2: serial@98c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc 83>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart3_default_state>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8350-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,   <55 306 4>,
+					  <59 312 3>, <62 374 2>,  <64 434 2>,   <66 438 3>,
+					  <69 86 1>,  <70 520 54>, <124 609 31>, <155 63 1>,
+					  <156 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		aoss_qmp: qmp@c300000 {
+			compatible = "qcom,sm8350-aoss-qmp";
+			reg = <0 0x0c300000 0 0x100000>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+			#power-domain-cells = <1>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8350-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 203>;
+
+			qup_uart3_default_state: qup-uart3-default-state {
+				rx {
+					pins = "gpio18";
+					function = "qup3";
+				};
+				tx {
+					pins = "gpio19";
+					function = "qup3";
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c21000 0x0 0x1000>,
+				      <0x0 0x17c22000 0x0 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c23000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c25000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c27000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c29000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c2b000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c2d000 0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8350-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
-- 
2.26.2

[PATCH v2 6/6] arm64: dts: qcom: Add basic devicetree support for SM8350-MTP board

[Vinod Koul]

Add basic devicetree support for Qualcomm Technologies, Inc SM8350 SoC
MTP board. This enabled uart node and adds rpmh-regulators present for
this board.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 arch/arm64/boot/dts/qcom/Makefile       |   1 +
 arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 250 ++++++++++++++++++++++++
 2 files changed, 251 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8350-mtp.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5113fac80b7a..25f8a69ed530 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -49,3 +49,4 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
new file mode 100644
index 000000000000..8923657579fb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sm8350 MTP";
+	compatible = "qcom,sm8350-mtp", "qcom,sm8350";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	pm8350-rpmh-regulators {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
+		vdd-l8-supply = <&vreg_s2c_0p8>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+		};
+
+		vreg_l1b_0p88: ldo1 {
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p96: ldo7 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8350c-rpmh-regulators {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_s1c_1p86>;
+		vdd-l2-l8-supply = <&vreg_s1c_1p86>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s12b_1p25>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_uim1: ldo4 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_uim2: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_1p2: ldo10 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p96: ldo11 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <52 8>;
+};
+
+&uart2 {
+	status = "okay";
+};
-- 
2.26.2

Re: [PATCH v2 5/6] arm64: dts: qcom: Add basic devicetree support for SM8350 SoC

[Sai Prakash Ranjan]

Hi Vinod,

On 2021-01-27 18:00, Vinod Koul wrote:
> Add basic devicetree support for Qualcomm Technologies, Inc SM8350 SoC.
> This adds gcc, pinctrl, reserved memory, uart, cpu nodes for this SoC.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 499 +++++++++++++++++++++++++++
>  1 file changed, 499 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm8350.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> new file mode 100644
> index 000000000000..29af0b931690
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -0,0 +1,499 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Linaro Limaited
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/power/qcom-aoss-qmp.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <38400000>;
> +			clock-output-names = "xo_board";
> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32000>;
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo685";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +			L2_0: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +				L3_0: l3-cache {
> +				      compatible = "cache";
> +				};
> +			};
> +		};
> +
> +		CPU1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo685";
> +			reg = <0x0 0x100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_100>;
> +			L2_100: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo685";
> +			reg = <0x0 0x200>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_200>;
> +			L2_200: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo685";
> +			reg = <0x0 0x300>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_300>;
> +			L2_300: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU4: cpu@400 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo685";
> +			reg = <0x0 0x400>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_400>;
> +			L2_400: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU5: cpu@500 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo685";
> +			reg = <0x0 0x500>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_500>;
> +			L2_500: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +
> +		};
> +
> +		CPU6: cpu@600 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo685";
> +			reg = <0x0 0x600>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_600>;
> +			L2_600: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU7: cpu@700 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo685";
> +			reg = <0x0 0x700>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_700>;
> +			L2_700: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +	};
> +
> +	firmware {
> +		scm: scm {
> +			compatible = "qcom,scm-sm8350", "qcom,scm";
> +			#reset-cells = <1>;
> +		};
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0x0 0x80000000 0x0 0x0>;
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hyp_mem: memory@80000000 {
> +			reg = <0x0 0x80000000 0x0 0x600000>;
> +			no-map;
> +		};
> +
> +		xbl_aop_mem: memory@80700000 {
> +			no-map;
> +			reg = <0x0 0x80700000 0x0 0x160000>;
> +		};
> +
> +		cmd_db: memory@80860000 {
> +			compatible = "qcom,cmd-db";
> +			reg = <0x0 0x80860000 0x0 0x20000>;
> +			no-map;
> +		};
> +
> +		reserved_xbl_uefi_log: memory@80880000 {
> +			reg = <0x0 0x80880000 0x0 0x14000>;
> +			no-map;
> +		};
> +
> +		smem_mem: memory@80900000 {
> +			reg = <0x0 0x80900000 0x0 0x200000>;
> +			no-map;
> +		};
> +
> +		cpucp_fw_mem: memory@80b00000 {
> +			reg = <0x0 0x80b00000 0x0 0x100000>;
> +			no-map;
> +		};
> +
> +		cdsp_secure_heap: memory@80c00000 {
> +			reg = <0x0 0x80c00000 0x0 0x4600000>;
> +			no-map;
> +		};
> +
> +		pil_camera_mem: mmeory@85200000 {
> +			reg = <0x0 0x85200000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		pil_video_mem: memory@85700000 {
> +			reg = <0x0 0x85700000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		pil_cvp_mem: memory@85c00000 {
> +			reg = <0x0 0x85c00000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		pil_adsp_mem: memory@86100000 {
> +			reg = <0x0 0x86100000 0x0 0x2100000>;
> +			no-map;
> +		};
> +
> +		pil_slpi_mem: memory@88200000 {
> +			reg = <0x0 0x88200000 0x0 0x1500000>;
> +			no-map;
> +		};
> +
> +		pil_cdsp_mem: memory@89700000 {
> +			reg = <0x0 0x89700000 0x0 0x1e00000>;
> +			no-map;
> +		};
> +
> +		pil_ipa_fw_mem: memory@8b500000 {
> +			reg = <0x0 0x8b500000 0x0 0x10000>;
> +			no-map;
> +		};
> +
> +		pil_ipa_gsi_mem: memory@8b510000 {
> +			reg = <0x0 0x8b510000 0x0 0xa000>;
> +			no-map;
> +		};
> +
> +		pil_gpu_mem: memory@8b51a000 {
> +			reg = <0x0 0x8b51a000 0x0 0x2000>;
> +			no-map;
> +		};
> +
> +		pil_spss_mem: memory@8b600000 {
> +			reg = <0x0 0x8b600000 0x0 0x100000>;
> +			no-map;
> +		};
> +
> +		pil_modem_mem: memory@8b800000 {
> +			reg = <0x0 0x8b800000 0x0 0x10000000>;
> +			no-map;
> +		};
> +
> +		hyp_reserved_mem: memory@d0000000 {
> +			reg = <0x0 0xd0000000 0x0 0x800000>;
> +			no-map;
> +		};
> +
> +		pil_trustedvm_mem: memory@d0800000 {
> +			reg = <0x0 0xd0800000 0x0 0x76f7000>;
> +			no-map;
> +		};
> +
> +		qrtr_shbuf: memory@d7ef7000 {
> +			reg = <0x0 0xd7ef7000 0x0 0x9000>;
> +			no-map;
> +		};
> +
> +		chan0_shbuf: memory@d7f00000 {
> +			reg = <0x0 0xd7f00000 0x0 0x80000>;
> +			no-map;
> +		};
> +
> +		chan1_shbuf: memory@d7f80000 {
> +			reg = <0x0 0xd7f80000 0x0 0x80000>;
> +			no-map;
> +		};
> +
> +		removed_mem: memory@d8800000 {
> +			reg = <0x0 0xd8800000 0x0 0x6800000>;
> +			no-map;
> +		};
> +	};
> +
> +	smem: qcom,smem {
> +		compatible = "qcom,smem";
> +		memory-region = <&smem_mem>;
> +		hwlocks = <&tcsr_mutex 3>;
> +	};
> +
> +	soc: soc@0 {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0 0 0 0 0x10 0>;
> +		dma-ranges = <0 0 0 0 0x10 0>;
> +		compatible = "simple-bus";
> +
> +		gcc: clock-controller@100000 {
> +			compatible = "qcom,gcc-sm8350";
> +			reg = <0x0 0x00100000 0x0 0x1f0000>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +			clock-names = "bi_tcxo", "sleep_clk";
> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
> +		};
> +
> +		ipcc: mailbox@408000 {
> +			compatible = "qcom,sm8350-ipcc", "qcom,ipcc";
> +			reg = <0 0x00408000 0 0x1000>;
> +			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			#mbox-cells = <2>;
> +		};
> +
> +		qupv3_id_1: geniqup@9c0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0x009c0000 0x0 0x6000>;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc 121>,
> +				 <&gcc 122>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			status = "disabled";
> +
> +			uart2: serial@98c000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0 0x0098c000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc 83>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart3_default_state>;
> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		tcsr_mutex: hwlock@1f40000 {
> +			compatible = "qcom,tcsr-mutex";
> +			reg = <0x0 0x01f40000 0x0 0x40000>;
> +			#hwlock-cells = <1>;
> +		};
> +
> +		pdc: interrupt-controller@b220000 {
> +			compatible = "qcom,sm8350-pdc", "qcom,pdc";
> +			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
> +			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,   <55 306 
> 4>,
> +					  <59 312 3>, <62 374 2>,  <64 434 2>,   <66 438 3>,
> +					  <69 86 1>,  <70 520 54>, <124 609 31>, <155 63 1>,
> +					  <156 716 12>;
> +			#interrupt-cells = <2>;
> +			interrupt-parent = <&intc>;
> +			interrupt-controller;
> +		};
> +
> +		aoss_qmp: qmp@c300000 {
> +			compatible = "qcom,sm8350-aoss-qmp";
> +			reg = <0 0x0c300000 0 0x100000>;
> +			interrupts-extended = <&ipcc IPCC_CLIENT_AOP 
> IPCC_MPROC_SIGNAL_GLINK_QMP
> +						     IRQ_TYPE_EDGE_RISING>;
> +			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> +			#clock-cells = <0>;
> +			#power-domain-cells = <1>;
> +		};
> +
> +		tlmm: pinctrl@f100000 {
> +			compatible = "qcom,sm8350-tlmm";
> +			reg = <0 0x0f100000 0 0x300000>;
> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			gpio-ranges = <&tlmm 0 0 203>;
> +
> +			qup_uart3_default_state: qup-uart3-default-state {
> +				rx {
> +					pins = "gpio18";
> +					function = "qup3";
> +				};
> +				tx {
> +					pins = "gpio19";
> +					function = "qup3";
> +				};
> +			};
> +		};
> +
> +		intc: interrupt-controller@17a00000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
> +			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		timer@17c20000 {
> +			compatible = "arm,armv7-timer-mem";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			reg = <0x0 0x17c20000 0x0 0x1000>;
> +			clock-frequency = <19200000>;
> +
> +			frame@17c21000 {
> +				frame-number = <0>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17c21000 0x0 0x1000>,
> +				      <0x0 0x17c22000 0x0 0x1000>;
> +			};
> +
> +			frame@17c23000 {
> +				frame-number = <1>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17c23000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17c25000 {
> +				frame-number = <2>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17c25000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17c27000 {
> +				frame-number = <3>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17c27000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17c29000 {
> +				frame-number = <4>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17c29000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17c2b000 {
> +				frame-number = <5>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17c2b000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17c2d000 {
> +				frame-number = <6>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17c2d000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		apps_rsc: rsc@18200000 {
> +			label = "apps_rsc";
> +			compatible = "qcom,rpmh-rsc";
> +			reg = <0x0 0x18200000 0x0 0x10000>,
> +				<0x0 0x18210000 0x0 0x10000>,
> +				<0x0 0x18220000 0x0 0x10000>;
> +			reg-names = "drv-0", "drv-1", "drv-2";
> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,tcs-offset = <0xd00>;
> +			qcom,drv-id = <2>;
> +			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
> +					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
> +
> +			rpmhcc: clock-controller {
> +				compatible = "qcom,sm8350-rpmh-clk";
> +				#clock-cells = <1>;
> +				clock-names = "xo";
> +				clocks = <&xo_board>;
> +			};
> +
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | 
> IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;

The last interrupt should be hypervisor physical interrupt(10) not 
12(hyp virtual).
It works currently with android bootloaders because the host linux 
kernel will run
at EL1 and will use EL1 physical timer interrupt(14), but if we ever 
have the host
kernel run in EL2(for example, chrome) then we will not receive any 
timer interrupts.

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH v2 5/6] arm64: dts: qcom: Add basic devicetree support for SM8350 SoC

[Vinod Koul]

Hi Sai,

On 27-01-21, 18:37, Sai Prakash Ranjan wrote:
> Hi Vinod,
> 
> On 2021-01-27 18:00, Vinod Koul wrote:

> > +	timer {
> > +		compatible = "arm,armv8-timer";
> > +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
> > IRQ_TYPE_LEVEL_LOW)>,
> > +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> > +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> > +			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> 
> The last interrupt should be hypervisor physical interrupt(10) not 12(hyp
> virtual).
> It works currently with android bootloaders because the host linux kernel
> will run
> at EL1 and will use EL1 physical timer interrupt(14), but if we ever have
> the host
> kernel run in EL2(for example, chrome) then we will not receive any timer
> interrupts.

I got these values from downstream and used them as is. I will update
and also check documentation. Thanks for pointing out

-- 
~Vinod

Re: [PATCH v2 5/6] arm64: dts: qcom: Add basic devicetree support for SM8350 SoC

[Sai Prakash Ranjan]

Hi Vinod,

On 2021-01-27 21:03, Vinod Koul wrote:
> Hi Sai,
> 
> On 27-01-21, 18:37, Sai Prakash Ranjan wrote:
>> Hi Vinod,
>> 
>> On 2021-01-27 18:00, Vinod Koul wrote:
> 
>> > +	timer {
>> > +		compatible = "arm,armv8-timer";
>> > +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
>> > IRQ_TYPE_LEVEL_LOW)>,
>> > +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> > +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> > +			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>> 
>> The last interrupt should be hypervisor physical interrupt(10) not 
>> 12(hyp
>> virtual).
>> It works currently with android bootloaders because the host linux 
>> kernel
>> will run
>> at EL1 and will use EL1 physical timer interrupt(14), but if we ever 
>> have
>> the host
>> kernel run in EL2(for example, chrome) then we will not receive any 
>> timer
>> interrupts.
> 
> I got these values from downstream and used them as is. I will update
> and also check documentation. Thanks for pointing out

Yes looks like lot of SoC dtsi entries in downstream got it wrong.
I see upstream sm8250 also missed this. We learnt it the hard way
spending lot of time debugging why we are not able to reach the
console(because no timer interrupts) during bringup on a system
with kernel running in EL2(with VHE). I will try to reach out to
baseport guys to make sure they take care of it in future.

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH v2 1/6] dt-bindings: arm: qcom: Document SM8350 SoC and boards

[Bjorn Andersson]

On Wed 27 Jan 06:30 CST 2021, Vinod Koul wrote:

> Document the SM8350 SoC binding and also the boards using it.
> 
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index c97d4a580f47..8fe7e473bfdf 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -41,6 +41,7 @@ description: |
>          sdm660
>          sdm845
>          sm8250
> +        sm8350
>  
>    The 'board' element must be one of the following strings:
>  
> @@ -178,6 +179,11 @@ properties:
>                - qcom,sm8250-mtp
>            - const: qcom,sm8250
>  
> +      - items:
> +          - enum:
> +              - qcom,sm8350-mtp
> +          - const: qcom,sm8350
> +
>  additionalProperties: true
>  
>  ...
> -- 
> 2.26.2
>