linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sujit Kautkar <sujitka@chromium.org>
Cc: Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Doug Anderson <dianders@chromium.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	Sibi Sankar <sibis@codeaurora.org>,
	Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up
Date: Mon, 31 May 2021 13:32:23 -0500	[thread overview]
Message-ID: <YLUrtzDWn8HnSZ9L@builder.lan> (raw)
In-Reply-To: <20210521145824.v2.2.I52f30ddfe62041b7e6c3c362f0ad8f695ac28224@changeid>

On Fri 21 May 16:58 CDT 2021, Sujit Kautkar wrote:

> Trogdor board does not have external pull-up for cd-gpio. Set this pin

This says "Trogdor" specifically, but the diffstats says "all 7180
devices".

> to internal pull-up for sleep config to avoid frequent regulator toggle
> events.
> 
> This change is aligned with Qualcomm's DT change posted at:
> https://patchwork.kernel.org/patch/11675347/
> 

I'm sorry, but afacit this says that your v2 is Qualcomm's v2 but with
the change I asked for. If this is the case, then your patch is either
v3 or you could just mention this below the '---', as I don't see any
benefit of carrying this in the git history.

Regards,
Bjorn

> Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
> Changes in v2:
> - added pull-up for IDP
> 
> (no changes since v1)
> 
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 2 +-
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 07133e0af581a..0c255edb7f3c3 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -696,7 +696,7 @@ pinconf-data {
>  
>  		pinconf-sd-cd {
>  			pins = "gpio69";
> -			bias-disable;
> +			bias-pull-up;
>  			drive-strength = <2>;
>  		};
>  	};
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index d128a0ed6ad3a..330deb4967ca2 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -1638,7 +1638,7 @@ pinconf-data {
>  
>  		pinconf-sd-cd {
>  			pins = "gpio69";
> -			bias-disable;
> +			bias-pull-up;
>  			drive-strength = <2>;
>  		};
>  	};
> -- 
> 2.31.1.818.g46aad6cb9e-goog
> 

      reply	other threads:[~2021-05-31 18:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21 21:58 [PATCH v2 0/2] Update sd card pinconf for sc7180 DT Sujit Kautkar
2021-05-21 21:58 ` [PATCH v2 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files Sujit Kautkar
2021-05-21 21:58 ` [PATCH v2 2/2] arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up Sujit Kautkar
2021-05-31 18:32   ` Bjorn Andersson [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YLUrtzDWn8HnSZ9L@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rnayak@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=sibis@codeaurora.org \
    --cc=sujitka@chromium.org \
    --subject='Re: [PATCH v2 2/2] arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).