linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, Andy Gross <agross@kernel.org>,
	Matthias Kaehlcke <mka@chromium.org>,
	Douglas Anderson <dianders@chromium.org>,
	Sumit Semwal <sumit.semwal@linaro.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/3] soc: qcom: geni: move GENI_IF_DISABLE_RO to common header
Date: Fri, 18 Jun 2021 12:03:56 -0500	[thread overview]
Message-ID: <YMzR/H3QyQeEB2hB@yoga> (raw)
In-Reply-To: <20210618141839.3777270-2-vkoul@kernel.org>

On Fri 18 Jun 09:18 CDT 2021, Vinod Koul wrote:

> GENI_IF_DISABLE_RO is used by geni spi driver as well to check the
> status if GENI, so move this to common header qcom-geni-se.h
> 
> Also, add FIFO_IF_DISABLE define.
> 

Afaict these registers relates to the hardware block that is primarily
owned by the individual engine-drivers, would it not make sense to move
them all to the shared header file?

(The patch itself still looks ok, but needs the consuming patch to be
merged)

Regards,
Bjorn

> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  drivers/soc/qcom/qcom-geni-se.c | 1 -
>  include/linux/qcom-geni-se.h    | 4 ++++
>  2 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
> index 5bdfb1565c14..fe666ea0c487 100644
> --- a/drivers/soc/qcom/qcom-geni-se.c
> +++ b/drivers/soc/qcom/qcom-geni-se.c
> @@ -104,7 +104,6 @@ static const char * const icc_path_names[] = {"qup-core", "qup-config",
>  #define GENI_OUTPUT_CTRL		0x24
>  #define GENI_CGC_CTRL			0x28
>  #define GENI_CLK_CTRL_RO		0x60
> -#define GENI_IF_DISABLE_RO		0x64
>  #define GENI_FW_S_REVISION_RO		0x6c
>  #define SE_GENI_BYTE_GRAN		0x254
>  #define SE_GENI_TX_PACKING_CFG0		0x260
> diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
> index 7c811eebcaab..5114e2144b17 100644
> --- a/include/linux/qcom-geni-se.h
> +++ b/include/linux/qcom-geni-se.h
> @@ -63,6 +63,7 @@ struct geni_se {
>  #define SE_GENI_STATUS			0x40
>  #define GENI_SER_M_CLK_CFG		0x48
>  #define GENI_SER_S_CLK_CFG		0x4c
> +#define GENI_IF_DISABLE_RO		0x64
>  #define GENI_FW_REVISION_RO		0x68
>  #define SE_GENI_CLK_SEL			0x7c
>  #define SE_GENI_DMA_MODE_EN		0x258
> @@ -105,6 +106,9 @@ struct geni_se {
>  #define CLK_DIV_MSK			GENMASK(15, 4)
>  #define CLK_DIV_SHFT			4
>  
> +/* GENI_IF_DISABLE_RO fields */
> +#define FIFO_IF_DISABLE			(BIT(0))
> +
>  /* GENI_FW_REVISION_RO fields */
>  #define FW_REV_PROTOCOL_MSK		GENMASK(15, 8)
>  #define FW_REV_PROTOCOL_SHFT		8
> -- 
> 2.31.1
> 

  reply	other threads:[~2021-06-18 17:04 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-18 14:18 [PATCH v2 0/3] soc: qcom: geni: add support for gpi dma Vinod Koul
2021-06-18 14:18 ` [PATCH v2 1/3] soc: qcom: geni: move GENI_IF_DISABLE_RO to common header Vinod Koul
2021-06-18 17:03   ` Bjorn Andersson [this message]
2021-06-22 12:13     ` Vinod Koul
2021-06-18 14:18 ` [PATCH v2 2/3] soc: qcom: geni: move struct geni_wrapper to header Vinod Koul
2021-06-18 17:10   ` Bjorn Andersson
2021-06-18 14:18 ` [PATCH v2 3/3] soc: qcom: geni: Add support for gpi dma Vinod Koul
2021-06-18 17:23   ` Bjorn Andersson
2021-06-22 12:15     ` Vinod Koul
2021-06-18 16:59 ` [PATCH v2 0/3] soc: qcom: geni: add " Bjorn Andersson
2021-06-20 11:06   ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YMzR/H3QyQeEB2hB@yoga \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=sumit.semwal@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).