[PATCH v3 0/5] regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board

[PATCH v3 0/5] regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board

[Bhupesh Sharma]

Changes since v2:
-----------------
- v2 series can be found here: https://lore.kernel.org/linux-arm-msm/20210615074543.26700-1-bhupesh.sharma@linaro.org/T/#m8303d27d561b30133992da88198abb78ea833e21 
- Addressed review comments from Bjorn and Mark.
- As per suggestion from Bjorn, seperated the patches in different
  patchsets (specific to each subsystem) to ease review and patch application.

Changes since v1:
-----------------
- v1 series can be found here: https://lore.kernel.org/linux-arm-msm/20210607113840.15435-1-bhupesh.sharma@linaro.org/T/#mc524fe82798d4c4fb75dd0333318955e0406ad18
- Addressed review comments from Bjorn and Vinod received on the v1
  series.

This series adds the regulator support code for SA8155p-adp board
which is based on Qualcomm snapdragon sa8155p SoC which in turn is
simiar to the sm8150 SoC. 

This board supports a new PMIC PMM8155AU.

While at it, also make some cosmetic changes to the regulator driver
and dt-bindings to make sure the compatibles are alphabetical and also
fix issues with extra comma(s) at the end of terminator line(s). 

Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>

Bhupesh Sharma (5):
  dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles
    alphabetically
  dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for
    SA8155p-adp board pmic
  regulator: qcom-rpmh: Cleanup terminator line commas
  regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[]
    array
  regulator: qcom-rpmh: Add new regulator found on SA8155p adp board

 .../regulator/qcom,rpmh-regulator.yaml        | 17 ++---
 drivers/regulator/qcom-rpmh-regulator.c       | 62 +++++++++++++++----
 2 files changed, 59 insertions(+), 20 deletions(-)

-- 
2.31.1

[PATCH v3 1/5] dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles alphabetically

[Bhupesh Sharma]

Arrange the compatibles inside qcom-rpmh regulator device tree
bindings alphabetically.

Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 .../bindings/regulator/qcom,rpmh-regulator.yaml  | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index e561a5b941e4..3546c6a966a3 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -33,6 +33,9 @@ description: |
 
     The names used for regulator nodes must match those supported by a given
     PMIC. Supported regulator node names are
+      For PM6150, smps1 - smps5, ldo1 - ldo19
+      For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
+      For PM7325, smps1 - smps8, ldo1 - ldo19
       For PM8005, smps1 - smps4
       For PM8009, smps1 - smps2, ldo1 - ldo7
       For PM8150, smps1 - smps10, ldo1 - ldo18
@@ -41,15 +44,15 @@ description: |
       For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
       For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
       For PMI8998, bob
-      For PM6150, smps1 - smps5, ldo1 - ldo19
-      For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
-      For PMX55, smps1 - smps7, ldo1 - ldo16
-      For PM7325, smps1 - smps8, ldo1 - ldo19
       For PMR735A, smps1 - smps3, ldo1 - ldo7
+      For PMX55, smps1 - smps7, ldo1 - ldo16
 
 properties:
   compatible:
     enum:
+      - qcom,pm6150-rpmh-regulators
+      - qcom,pm6150l-rpmh-regulators
+      - qcom,pm7325-rpmh-regulators
       - qcom,pm8005-rpmh-regulators
       - qcom,pm8009-rpmh-regulators
       - qcom,pm8009-1-rpmh-regulators
@@ -59,11 +62,8 @@ properties:
       - qcom,pm8350c-rpmh-regulators
       - qcom,pm8998-rpmh-regulators
       - qcom,pmi8998-rpmh-regulators
-      - qcom,pm6150-rpmh-regulators
-      - qcom,pm6150l-rpmh-regulators
-      - qcom,pmx55-rpmh-regulators
-      - qcom,pm7325-rpmh-regulators
       - qcom,pmr735a-rpmh-regulators
+      - qcom,pmx55-rpmh-regulators
 
   qcom,pmic-id:
     description: |
-- 
2.31.1

[PATCH v3 2/5] dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for SA8155p-adp board pmic

[Bhupesh Sharma]

Add compatible string for pmm8155au pmic found on
the SA8155p-adp board.

Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 .../devicetree/bindings/regulator/qcom,rpmh-regulator.yaml       | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 3546c6a966a3..34de38377aa6 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -62,6 +62,7 @@ properties:
       - qcom,pm8350c-rpmh-regulators
       - qcom,pm8998-rpmh-regulators
       - qcom,pmi8998-rpmh-regulators
+      - qcom,pmm8155au-rpmh-regulators
       - qcom,pmr735a-rpmh-regulators
       - qcom,pmx55-rpmh-regulators
 
-- 
2.31.1

[PATCH v3 3/5] regulator: qcom-rpmh: Cleanup terminator line commas

[Bhupesh Sharma]

Cleanup the qcom-rpmh regulator driver to remove comma(s)
at the end of the terminator line(s).

Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 22fec370fa61..6a8b7ac67bbe 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -811,12 +811,12 @@ static const struct rpmh_vreg_init_data pm8998_vreg_data[] = {
 	RPMH_VREG("ldo28",  "ldo%s28", &pmic4_pldo,      "vdd-l16-l28"),
 	RPMH_VREG("lvs1",   "vs%s1",   &pmic4_lvs,       "vin-lvs-1-2"),
 	RPMH_VREG("lvs2",   "vs%s2",   &pmic4_lvs,       "vin-lvs-1-2"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = {
 	RPMH_VREG("bob",    "bob%s1",  &pmic4_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
@@ -824,7 +824,7 @@ static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
 	RPMH_VREG("smps2",  "smp%s2",  &pmic4_ftsmps426, "vdd-s2"),
 	RPMH_VREG("smps3",  "smp%s3",  &pmic4_ftsmps426, "vdd-s3"),
 	RPMH_VREG("smps4",  "smp%s4",  &pmic4_ftsmps426, "vdd-s4"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
@@ -856,7 +856,7 @@ static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
 	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l16-l17"),
 	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l16-l17"),
 	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
@@ -880,7 +880,7 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
 	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
 	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
@@ -906,7 +906,7 @@ static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
 	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l8"),
 	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9-l10"),
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_nldo,      "vdd-l6-l9-l10"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
@@ -934,7 +934,7 @@ static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
 	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l1-l12"),
 	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l3-l4-l5-l7-l13"),
 	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
@@ -947,7 +947,7 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv,   "vdd-l7"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
@@ -960,7 +960,7 @@ static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo7",   "ldo%s6",  &pmic5_pldo_lv,   "vdd-l7"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
@@ -988,7 +988,7 @@ static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
 	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
 	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
 	RPMH_VREG("ldo19",  "ldo%s19", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
@@ -1012,7 +1012,7 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
 	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
 	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
@@ -1039,7 +1039,7 @@ static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
 	RPMH_VREG("ldo14",   "ldo%s14",   &pmic5_nldo,      "vdd-l14"),
 	RPMH_VREG("ldo15",   "ldo%s15",   &pmic5_nldo,      "vdd-l15"),
 	RPMH_VREG("ldo16",   "ldo%s16",   &pmic5_pldo,      "vdd-l16"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
-- 
2.31.1

[PATCH v3 4/5] regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[] array

[Bhupesh Sharma]

Add missing terminator(s) at the end of pm7325x_vreg_data[]
array instances.

Fixes: c4e5aa3dbee5 ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support")
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 6a8b7ac67bbe..af41a517da99 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1070,6 +1070,7 @@ static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
 	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
 	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
 	RPMH_VREG("ldo19",  "ldo%s19", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
+	{}
 };
 
 static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
@@ -1083,6 +1084,7 @@ static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-bob"),
+	{}
 };
 
 static int rpmh_regulator_probe(struct platform_device *pdev)
-- 
2.31.1

[PATCH v3 5/5] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board

[Bhupesh Sharma]

SA8155p-adp board supports a new regulator - pmm8155au.

The output power management circuits in this regulator include:
- FTS510 smps,
- HFS510 smps, and
- LDO510 linear regulators

Add support for the same.

Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 36 +++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index af41a517da99..6cca910a76de 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -883,6 +883,38 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
 	{}
 };
 
+static const struct rpmh_vreg_init_data pmm8155au_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic5_hfsmps510, "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic5_hfsmps510, "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps510, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps510, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic5_ftsmps510, "vdd-s8"),
+	RPMH_VREG("smps9",  "smp%s9",  &pmic5_ftsmps510, "vdd-s9"),
+	RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l16-l17"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l16-l17"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l16-l17"),
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	{}
+};
+
 static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
 	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
 	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
@@ -1177,6 +1209,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pmc8180c-rpmh-regulators",
 		.data = pm8150l_vreg_data,
 	},
+	{
+		.compatible = "qcom,pmm8155au-rpmh-regulators",
+		.data = pmm8155au_vreg_data,
+	},
 	{
 		.compatible = "qcom,pmx55-rpmh-regulators",
 		.data = pmx55_vreg_data,
-- 
2.31.1

Re: [PATCH v3 1/5] dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles alphabetically

[Bjorn Andersson]

On Thu 17 Jun 00:17 CDT 2021, Bhupesh Sharma wrote:

> Arrange the compatibles inside qcom-rpmh regulator device tree
> bindings alphabetically.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Cc: Mark Brown <broonie@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  .../bindings/regulator/qcom,rpmh-regulator.yaml  | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
> index e561a5b941e4..3546c6a966a3 100644
> --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
> @@ -33,6 +33,9 @@ description: |
>  
>      The names used for regulator nodes must match those supported by a given
>      PMIC. Supported regulator node names are
> +      For PM6150, smps1 - smps5, ldo1 - ldo19
> +      For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
> +      For PM7325, smps1 - smps8, ldo1 - ldo19
>        For PM8005, smps1 - smps4
>        For PM8009, smps1 - smps2, ldo1 - ldo7
>        For PM8150, smps1 - smps10, ldo1 - ldo18
> @@ -41,15 +44,15 @@ description: |
>        For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
>        For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
>        For PMI8998, bob
> -      For PM6150, smps1 - smps5, ldo1 - ldo19
> -      For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
> -      For PMX55, smps1 - smps7, ldo1 - ldo16
> -      For PM7325, smps1 - smps8, ldo1 - ldo19
>        For PMR735A, smps1 - smps3, ldo1 - ldo7
> +      For PMX55, smps1 - smps7, ldo1 - ldo16
>  
>  properties:
>    compatible:
>      enum:
> +      - qcom,pm6150-rpmh-regulators
> +      - qcom,pm6150l-rpmh-regulators
> +      - qcom,pm7325-rpmh-regulators
>        - qcom,pm8005-rpmh-regulators
>        - qcom,pm8009-rpmh-regulators
>        - qcom,pm8009-1-rpmh-regulators
> @@ -59,11 +62,8 @@ properties:
>        - qcom,pm8350c-rpmh-regulators
>        - qcom,pm8998-rpmh-regulators
>        - qcom,pmi8998-rpmh-regulators
> -      - qcom,pm6150-rpmh-regulators
> -      - qcom,pm6150l-rpmh-regulators
> -      - qcom,pmx55-rpmh-regulators
> -      - qcom,pm7325-rpmh-regulators
>        - qcom,pmr735a-rpmh-regulators
> +      - qcom,pmx55-rpmh-regulators
>  
>    qcom,pmic-id:
>      description: |
> -- 
> 2.31.1
> 

Re: [PATCH v3 2/5] dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for SA8155p-adp board pmic

[Bjorn Andersson]

On Thu 17 Jun 00:17 CDT 2021, Bhupesh Sharma wrote:

> Add compatible string for pmm8155au pmic found on
> the SA8155p-adp board.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Cc: Mark Brown <broonie@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  .../devicetree/bindings/regulator/qcom,rpmh-regulator.yaml       | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
> index 3546c6a966a3..34de38377aa6 100644
> --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
> @@ -62,6 +62,7 @@ properties:
>        - qcom,pm8350c-rpmh-regulators
>        - qcom,pm8998-rpmh-regulators
>        - qcom,pmi8998-rpmh-regulators
> +      - qcom,pmm8155au-rpmh-regulators
>        - qcom,pmr735a-rpmh-regulators
>        - qcom,pmx55-rpmh-regulators
>  
> -- 
> 2.31.1
> 

Re: [PATCH v3 5/5] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board

[Bjorn Andersson]

On Thu 17 Jun 00:17 CDT 2021, Bhupesh Sharma wrote:

> SA8155p-adp board supports a new regulator - pmm8155au.
> 
> The output power management circuits in this regulator include:
> - FTS510 smps,
> - HFS510 smps, and
> - LDO510 linear regulators
> 
> Add support for the same.
> 
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/regulator/qcom-rpmh-regulator.c | 36 +++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index af41a517da99..6cca910a76de 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -883,6 +883,38 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
>  	{}
>  };
>  
> +static const struct rpmh_vreg_init_data pmm8155au_vreg_data[] = {
> +	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
> +	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
> +	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
> +	RPMH_VREG("smps4",  "smp%s4",  &pmic5_hfsmps510, "vdd-s4"),
> +	RPMH_VREG("smps5",  "smp%s5",  &pmic5_hfsmps510, "vdd-s5"),
> +	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps510, "vdd-s6"),
> +	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps510, "vdd-s7"),
> +	RPMH_VREG("smps8",  "smp%s8",  &pmic5_ftsmps510, "vdd-s8"),
> +	RPMH_VREG("smps9",  "smp%s9",  &pmic5_ftsmps510, "vdd-s9"),
> +	RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
> +	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l8-l11"),
> +	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,      "vdd-l2-l10"),
> +	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
> +	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
> +	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
> +	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l6-l9"),
> +	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
> +	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l1-l8-l11"),
> +	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9"),
> +	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l2-l10"),
> +	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo,      "vdd-l1-l8-l11"),
> +	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
> +	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l16-l17"),
> +	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
> +	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
> +	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l16-l17"),
> +	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l16-l17"),
> +	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
> +	{}
> +};
> +
>  static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
>  	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
>  	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
> @@ -1177,6 +1209,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
>  		.compatible = "qcom,pmc8180c-rpmh-regulators",
>  		.data = pm8150l_vreg_data,
>  	},
> +	{
> +		.compatible = "qcom,pmm8155au-rpmh-regulators",
> +		.data = pmm8155au_vreg_data,
> +	},
>  	{
>  		.compatible = "qcom,pmx55-rpmh-regulators",
>  		.data = pmx55_vreg_data,
> -- 
> 2.31.1
> 

Re: [PATCH v3 0/5] regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board

[Mark Brown]

On Thu, 17 Jun 2021 10:47:07 +0530, Bhupesh Sharma wrote:
> Changes since v2:
> -----------------
> - v2 series can be found here: https://lore.kernel.org/linux-arm-msm/20210615074543.26700-1-bhupesh.sharma@linaro.org/T/#m8303d27d561b30133992da88198abb78ea833e21
> - Addressed review comments from Bjorn and Mark.
> - As per suggestion from Bjorn, seperated the patches in different
>   patchsets (specific to each subsystem) to ease review and patch application.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/5] dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles alphabetically
      commit: 85adaac269c36d8e2e0a5de87a1dc4ec06e984f1
[2/5] dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for SA8155p-adp board pmic
      commit: 66376e152303bb60d6a75328b7bc998de86f8c08
[3/5] regulator: qcom-rpmh: Cleanup terminator line commas
      commit: ba5dabf40e9143ff6c48943b76a532d5ab34d0e8
[4/5] regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[] array
      commit: f26cdadad729743888eb4ac2c17eac3cf845b493
[5/5] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board
      commit: 9a336ed97d00bb69547272fc7d0439802bece375

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH v3 1/5] dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles alphabetically

[Rob Herring]

On Thu, 17 Jun 2021 10:47:08 +0530, Bhupesh Sharma wrote:
> Arrange the compatibles inside qcom-rpmh regulator device tree
> bindings alphabetically.
> 
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  .../bindings/regulator/qcom,rpmh-regulator.yaml  | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 2/5] dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for SA8155p-adp board pmic

[Rob Herring]

On Thu, 17 Jun 2021 10:47:09 +0530, Bhupesh Sharma wrote:
> Add compatible string for pmm8155au pmic found on
> the SA8155p-adp board.
> 
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  .../devicetree/bindings/regulator/qcom,rpmh-regulator.yaml       | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>